Silex Technology SDMAN2 Wireless LAN SDIO module User Manual Users manual

Silex Technology, Inc. Wireless LAN SDIO module Users manual

Contents

Users manual

User Manual Since this module is not sold to general end users directly, there is no user manual of module. For the details about this module, please refer to the specification sheet of module. This module should be installed in the host device according to the interface specification (installation procedure). For OEM Antenna Type Model Antenna Gain Note 2.4GHz 5GHz 1 External printed PCB antenna :Unictron H2B1PC1A1C 1.8dBi 3.9dBi For WLAN and Bluetooth 2 On board chip antenna :Unictron H2U84W1H1S 1.4dBi 2.3dBi For WLAN and Bluetooth 3 Sleeve antenna : SANSEI ANTDC-081A0 2.0dBi 2.1dBi For WLAN 4 Embedded Antenna : Ethertronics 1000418 2.5dBi 3.5dBi For WLAN
The following information must be indicated on the host device of this module; [for FCC] Contains Transmitter Module FCC ID: N6C-SDMAN2 or Contains FCC ID: N6C-SDMAN2 [for IC] Contains Transmitter Module IC: 4908A-SDMAN2 or Contains IC: 4908A-SDMAN2 [for FCC and IC] This device complies with Part 15 of FCC Rules and Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme à la partie 15 des règles de la FCC et aux normes des CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. *If it is difficult to describe this statement on the host product due to the size, please describe in the User's manual.
The following statements must be described on the user manual of the host device of this module; [for FCC] FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. [for IC] 5150-5250MHz and 5250-5350MHz bands are restricted to indoor operations only. La bandes 5150-5250MHz et 5250-5350MHz ont restreints à une utilisation à l’intérieur seulement. High-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Les radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz, et ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. [for FCC and IC] This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body. Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices d'exposition et d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre le radiateur et le corps humain.

Navigation menu