Signal Path Peachtree Audio DEEPBLUE deepblue2 User Manual

Signal Path International DBA Peachtree Audio deepblue2 Users Manual

Users Manual

Owner’s Manual
IMPORTANT SAFETY INSTRUCTIONSB Read these instructions – All the safety and operating instructions should be read before this product is operated.C Keep these instructions – The safety and operating instructions should be retained for future reference.D Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.E Follow all instructions. F Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like.G Clean only with dry cloth. Unplug the deepblue2 before cleaning.H Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.I Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.J Only use attachments/accessories specied by the manufacturer.K Unplug this apparatus during lightning storms or when unused for long periods of time.L Refer all servicing to qualied personnel. Servicing is required when the apparatus has been damaged in any way such as the power cord or plug is damaged. Other damage may occur if liquid or objects have been dropped or spilled into the apparatus. Dropping the apparatus, exposure to rain, and excessive moisture may cause additional damage.M Please keep the unit in a good ventilation environment.N CAUTION: These servicing instructions are for use by qualied service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualied to do so.O WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and objects lled with liquids, such as vases, shall not be placed on apparatus.P WARNING: The mains plug/appliance coupler is used as disconnect device, the disconnect device shall remain readily operable.Q The lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufcient magnitude to constitute a risk of electric shock.WARNING: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualied personnel.The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.Q No naked ame sources, such as lighted candles, should be placed on the apparatus.R Correct disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.S Move the deepblue2 away from other wireless devices that could be causing interference.T Install deepblue2 far away from heat sources.U Use only the accessories provided.UNPACKING AND WARRANTYB Keep all packing materials for future shipments.C Keep a record of your bill of sale and a copy of the serial number for warranty and insurance purposes.D You may register your product on our website: www.peachtreeaudio.com.Safety GuidelinesThe lighting flash with arrowhead symbol, within an equilateraltriangle, is intended to alert user to the presence of uninsulated“dangerous voltage” within the product’s enclosure, that maybe of sufficient magnitude to constitute a risk of electric.The exclamation point within an equilateral triangle is intendedto alert the user to the presence of important operatingand maintenance (servicing) instruction in the literatureaccompanying the appliance.IMPORTANT SAFETY INSTRUCTIONSFCC NOTICE:This equipment has been tested and found to complywith the limits for a Class B digital debice, pursuant topart 15 of the FCC Rules. These limits are designed toprovide reasidential protection against harmfulinterference in a residential installation. This equipmentgenerates,uses and can radiate radio frequency energyand,if not Installed and used in accordance with theinstructions,may cause harmful interference to radiocommunications.However,there is no guarantee that interference will notoccur in a particular installation. If this equipment doescause harmfull interference to radio or telecisionreception. which can be determined by turning theequipment off and on,the user is encouraged to try tocorrect the interference by one or more of the followingmeasures:　Ɣ5HRULHQWRUUHORFDWHWKHUHFHLYLQJDQWHQQD　Ɣ,QFUHDVHWKHVHSDUDWLRQEHWZHHQWKHHTXLSPHQWDQG receiver.　Ɣ&RQQHWWKHHTXLSPHQWLQWRDQRXWOHWRQDFLUFXLWU different from that to which the receiver is connected.　Ɣ&RQVXOWWKHGHDOHURUDQH[SHULHQFHGUDGLR79 technician for help.FCC NOTICE:To assure continued compliance, follow the attachedinstallation instructions and use only shielded cableswhen connecting to other devices. Modifications notauthorized by the manufacturer may void user’s authorityto operate this device.1CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.CAUTIONRISK OF ELECTRIC SHOCK DO NOT OPENWARNINGUSE UNDER SUPERVISION OF AN ADULTDUE TO LONG CORDThis unit has a long AC cord or other long cord that can easily be tripped on or pulled on, causing injury, Please make sure it is arranged so it will not drape over a tabletop,etc. Where it can be pulled on by children or tripped over accidentally.
(Rev. 9/2014)IntroductionContents and Rear Panel ConnectionsTop Panel ButtonsRemote ControlUseful Tips and More...Troubleshooting and SpecicationsProduct Warranty and Service
4Thank you for purchasing a Peachtree Audio deepblue2!At Peachtree Audio we design products that utilize a unique combination of analog and digital technologies that work together to provide a compelling music listening experience. The deepblue2 combines a high-performance all-in-one speaker with the convenience of an aptXTM Bluetooth wireless receiver to connect to any Bluetooth equipped mobile device or PC. The deepblue2 also provides analog and optical digital inputs so you can connect up to three separate devices. The deepblue2 features two tweeters, two midranges and a dedicated 6.5” woofer all driven by a 440-watt power amplier to provide amazing sound quality and output capability from a relatively small footprint.This manual is a intended as an overall guide to your deepblue2. It explains how to set it up, pair and connect devices and use it from the top panel and remote control. There are also some tips and troubleshooting should you have additional questions. We sincerely hope the deepblue2 provides you with many years of music listening enjoyment!Please visit our website at www.peachtreeaudio.com for the latest tips on getting the best sound quality from the music stored or streamed from your computer and from all of your sources. Please contact your dealer or Peachtree Audio directly if you have any questions that this manual does not answer. Also, now is a great time to visit our website and register your deepblue2.Thanks again for you support and happy listening!- The Peachtree Audio teamIntroduction
Contents & Rear Panel Connections1AC-INAUXOPT USB324AUX Analog Audio Input: Accepts line-level analog input from a tuner, cassette deck, phono preamp or other type of line-level analog source.Notes: Phono input requires the use of a phono preamplier. When using the head-phone output of a connected device, that device’s volume control will affect the input level to the deepblue2. The maximum output level of the deepblue2 will be limited if the volume control of the connected device is set to relatively low level.AC-IN: For connection to a compatible AC power source using the included power cord.USB Digital Input: For service use only. Note: Does NOT function as a USB digital audio input.OPT Digital Audio Input: Accepts digital audio input from a Toslink optical digital audio output up to 96kHz. Toslink digital audio outputs are common on most digital audio sources including; disc players, cable boxes, Apple TVs, etc...BCDEContents of Packaging:• deepblue2• AC power cord• IR remote control with battery• 3.5mm to RCA adapter cable• Optical digital cable• 3.5mm to 3.5mm cable for smartphones5
6Top Panel ButtonsBluetooth: Push and release to select the Bluetooth input. The blue LED will light for 10 seconds indicating the input is selected. Push and hold for several seconds to enter Bluetooth pairing mode. The Bluetooth LEDs will ash blue and white in this mode. Enter the Bluetooth menu on your device and select “deepblue2” to conrm the pairing. The Bluetooth LED will light solid blue and you will hear a double-beep when the deepblue2 is connected to a Bluetooth device.Notes: deepblue2 will pair with up to 5 Bluetooth devices. After they are paired, pressing and releasing the Bluetooth button will switch between them. To clear all paired devices, press and hold the power button for 10 seconds. The white power LED will blink to conrm that the Bluetooth paired device memory has been cleared.INPUT: Push and release to toggle between the AUX (blue LED) and OPT (white LED) inputs on the rear panel. The blue LED will light for 10 seconds indicating the AUX input is selected. The white LED will light for 10 seconds indicating the OPT input is selected.On/Standby: Push and release to toggle between power on and standby modes. The current input LED will light for 10 seconds after the unit is toggled on.Volume “-”: Push and release to decrease the volume level by 1 step. Push and hold for more than 1 second to decrease the volume level by multiple steps. The volume will continue decreasing until you release the button or achieve the minimum volume level.Volume “+”: Push and release to increase the volume level by 1 step. Push and hold for more than 1 second to increase the volume level by multiple steps. The volume will continue increasing until you release the button or achieve the maximum volume level.BCDEF12345Notes: The five LEDs will flash white while audio is muted. The blue LEDs indicate the volume level for 10 seconds after a volume button is released. Each LED represents 20% of the volume range.
VOLVOLBASS+BASS_AUX OPT1256438797RemoteBCDEOn / Standby: Push and release to toggle between power on and standby modes. The current input LED will light for 10 seconds after the unit is toggled on.VOL ^: Push and release to increase the volume level by 1 step. Push and hold for more than 1 second to increase the volume level by multiple steps. The volume will continue increasing until you release the button or achieve the maximum volume level.VOL ^: Push and release to decrease the volume level by 1 step. Push and hold for more than 1 second to decrease the volume level by multiple steps. The volume will continue decreasing until you release the button or achieve the minimum volume level.Mute Symbol: Push and release to toggle audio muting on and off. The ve LEDs will ash white while audio is muted.Notes: The blue LEDs indicate the volume level for 10 seconds after a volume button is released. Each LED represents 20% of the volume range.^F BASS +: Push and release to increase the bass level by 1 step. Push and hold for more than 1 second to increase the bass level by multiple steps. The bass will continue increasing until you release the button or achieve the maximum bass level.G BASS -: Push and release to decrease the bass level by 1 step. Push and hold for more than 1 second to decrease the bass level by multiple steps. The bass will continue decreasing until you release the button or achieve the minimum bass level.Notes: The rst press of the BASS+ or BASS- buttons will display the current setting via the white LEDs. Subsequent presses within 10 seconds will adjust the bass setting. Each white LED represents 20% of the bass range. The lowest bass setting (1) is indicated by the left-most LED being lit 50%. The highest setting (10) is indicated by all the LEDs being fully lit.H AUX: Push and release to select the AUX input on the rear panel. The blue LED will light for 10 seconds indicating the AUX input is selected. Note: When the unit is in standby mode, this will also turn the unit on.I OPT: Push and release to select the OPT input on the rear panel. The white LED will light for 10 seconds indicating the OPT input is selected. Note: When the unit is in standby mode, this will also turn the unit on.J Bluetooth Symbol: Push and release to select the Bluetooth input. The blue LED will light for 10 seconds indicating the input is selected. Note: deepblue2 will pair with up to 5 Bluetooth devices. After they are paired, pressing and releasing the Bluetooth button will switch between them.
Pairing Your DeviceRefer to your Bluetooth device’s owner’s manual for details on how to enter the device’s Bluetooth pairing mode.B Push and hold the Bluetooth button on the top panelfor at least 4 seconds to enter Bluetooth pairing mode. The Bluetooth LED will ash blue and white in this mode. C Turn on the Bluetooth feature on your device. Typically, Bluetooth controls are found in the device settings menu. Enter the Bluetooth menu on your device and select “deepblue2” to conrm the pairing.D Once paired with a device, the Bluetooth LED will light blue. A double-beep sound will also indicate that the connection is estabilished.Note: Pairing remains even when the player or the Bluetooth device is powered off or is taken out of range, The player will attempt to connect with the last connected device when that device is powered on and in range. Your Bluetooth device may pause music playback when the Bluetooth connection is lost. You may need to press the play button on the Bluetooth device to resume playback after the Bluetooth connection is restored. Reconnecting Your DeviceIf you move out of range or turn off the Bluetooth feature your deepblue2 will be disconnected from your device and the LED will ash blue. To reconnect, simply open the Bluetooth menu and tap on the “deepblue2” and the connection will be reestablished. Out of Range or Lost SignalWhen the paired device is more than ~ 33 feet away from the deepblue2 or there is some-thing blocking the Bluetooth signal. The LED will ash blue to indicate the connection between the device and the deepblue2 is lost. To reestablish a lost connection: B Move the connected device back into range (within ~ 33 feet), and make sure there’s a clear line of sight and there are no obstructions between deepblue2 and device.C The connection will automatically be reestablished and the LED will turn light blue.D If the connection is lost, you need to reconnect the device and the deepblue2 again. Please follow the “Reconnecting Your Device” instructions above.AUX Analog Audio InputUse the included 3.5mm analog cable or 3.5mm to RCA cable to connect the line-level output from a source like a TV, set-top box or similar device. Notes: Phono input requires the use of a phono preamplier. When using the headphone output of a connected device, that device’s volume control will affect the input level to the deepblue2. The maximum output level of the deepblue2 will be limited if the volume control of the connected device is set to relatively low level.OPT Digital Audio InputUse an optical digital audio cable to connect the S/PDIF output from a digital source like a media player, CD player, TV, set-top box or similar.Useful Tips and More...8
9Troubleshooting & SpecificationsI Don’t Hear Anything PlayingMake sure the deepblue2 is plugged in and turned on (indicated by all of the top panel buttons lit white). Check that the correct input is selected; Bluetooth (Bluetooth LED blue), AUX (Input LED lit blue) or OPT (Input LED lit white).If the Bluetooth LED is ashing blue, the input is selected but a Bluetooth device is not currently connected. Check the following next:Make sure Bluetooth is enabled on your device. Make sure your Bluetooth device is within ~33 feet of the deepblue2. Move closer or adjust the position of the deepblue2 to establish a connection.Make sure music is playing on your device (not paused) and that the volume on the device is not muted or set to a very low level. Many devices will pause playback if the Bluetooth connection is lost.If AUX is selected, make sure the wired connection is fully inserted on the connected device and the deepblue2. If the connection is ok, check the vol-ume level of the connected device (if using a headphone output) to make sure it is not muted or set to a very low level.If OPT is selected, make sure the wired connection is fully inserted on the connected device and the deepblue2. If the connection is ok, check the volume level of the connected device (if using a device with a built-in volume control) to make sure it is not muted or set to a very low level.Make sure the volume of the deepblue2 is set to a comfortable listening level.Specications:• Acoustic Design: (2) 1-inch high frequency drivers (2) 3-inch midrange frequency drivers (1) 6.5-inch low frequency driver Acoustically sealed cabinet• Power Amplifer: 440 Watts• Inputs: aptX Bluetooth wireless with up to 5 connected devices Optical Digital Audio (Toslink) Line-level Analog Audio (3.5mm)• Dimensions (H x W x D): 9.1 x 14.2 x 6.5 (inches) / 230 x 360x 164 (mm)• Weight: 16 pounds / 7.3 kg• AC Input: 100-240V 50/60Hz
10International WarrantyThe deepblue2 has a 1 year Parts and Labor warranty from the date of purchase. Units that are covered under this warranty include deepblue2’s purchased directly from authorized Peachtree Audio dealers or distributors. Peachtree Audio takes no responsibility for defects arising from accident, misuse, abuse, unusual wear and tear, neglect, unauthorized adjustment or repair. This warranty does not cover shipping costs. Visit www.peachtreeaudio.com for a copy of the complete warranty.Claims Under WarrantyIn the unlikely event that you experience a failure with your product please email service@peachtreeaudio.com for a Return Authorization (RA) number BEFORE shipping the product for service. Any product received without an RA number may be refused. You may also wish to route your repair through your dealer or distributor, which we encourage.The unit should be packed in its original shipping carton and packaging and returned to the dealer from whom it was purchased, or if unavailable, directly to the service center as directed by Peachtree Audio.Please use a suitable carrier like FedEx or UPS. DO NOT SEND BY POSTAL SERVICE. Peachtree Audio cannot accept responsibility for products while they are in transit to the dealer, distributor, or service facility. Please insure the product against potential loss or damage while in transit.For technical support (not RA number requests), please call 704-391-9337 or email service@peachtreeaudio.com.Main ofce:Peachtree Audio2045 120th Avenue NEBellevue, WA 98005704-391-9337www.peachtreeaudio.comInternational Warranty and Claims Under WarrantyProduct Warranty and Service
Worning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. RF Exposure Statement To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Owner’s Manual

Navigation menu