Sierra Wireless MC7455 Radio Module User Manual

Sierra Wireless Inc. Radio Module Users Manual

UserManual.wiki >

Sierra Wireless >

MC7455 User Manual >

Users Manual_rev

Contents

1. TempConfidential_4118013 MC7455 Hardware Integration Guide v1
2. Users Manual_rev
3. 4118013 MC7455 Hardware Integration Guide r2

Users Manual_rev

Cloud Services Gateway 700 Series20.15-,/1"!,+ï|}§~§~|}

~|}ïï),2!"/3& "01"46||"/&"0ïï2Table of Contents1 At a Glance...........................................................................................................51.1 CSG700 Appliance Models ....................................................................................................... 51.2 Chassis Views............................................................................................................................ 52 Components and Specifications ........................................................................72.1 Front and Rear Panel Components......................................................................................... 92.1.1 Front Panel ..............................................................................................................................................................92.1.1.1 LEDs .........................................................................................................................................................................92.1.1.2 SIM Card Slots .........................................................................................................................................................92.1.2 Rear Panel ...............................................................................................................................................................92.1.2.1 LEDs .......................................................................................................................................................................102.1.2.2 Power Button ........................................................................................................................................................102.1.2.3 Reset Button..........................................................................................................................................................112.1.2.4 Kensington Security Lock.....................................................................................................................................112.1.2.5 GPS Input...............................................................................................................................................................112.2 Network Interface Card Modules .......................................................................................... 112.3 Interface Numbering.............................................................................................................. 122.4 Power Supply and Airflow ..................................................................................................... 122.4.1 AC Power Supply for CSG700 Series Appliances .................................................................................................122.4.2 Airflow Requirements ...........................................................................................................................................133 Planning and Installation .................................................................................143.1 General Safety Guidelines ..................................................................................................... 143.2 Federal Communication Commission Interference Statement .......................................... 143.3 Prepare the Site for Installation............................................................................................ 153.3.1 Site Preparation Guidelines .................................................................................................................................153.3.2 Environmental Requirements ..............................................................................................................................153.3.3 Rack Requirements...............................................................................................................................................153.3.4 Airflow Requirements ...........................................................................................................................................153.4 Install a CSG700 Series Appliance......................................................................................... 163.4.1 Unpack a CSG700 Series Appliance .....................................................................................................................163.4.2 Packing List for a CSG700 Series Appliance.........................................................................................................173.4.3 Mount a CSG700 Series Appliance in a Rack........................................................................................................18

~|}ïï),2!"/3& "01"46||"/&"0ïï33.5 Connect a CSG700 Series Appliance ..................................................................................... 203.5.1 Step 1: Connect Earth Ground to a CSG700 Series Appliance ............................................................................213.5.2 Step 2: Connect AC Power to a CSG700 Series Appliance...................................................................................213.5.3 Step 3: Connect a CSG700 Series Appliance to a Management Console ...........................................................214 Return Hardware...............................................................................................224.1 Locate the Model and Serial Number ................................................................................... 224.2 Obtain an Return Material Authorization ............................................................................. 224.3 Repack the Appliance ............................................................................................................ 224.4 Return Hardware.................................................................................................................... 22

~|}ïï),2!"/3& "01"46||"/&"0ïï41 https://docs.versa-networks.com/display/201/Plan+and+InstallThese articles provide an overview of the Cloud Service Gateway (CSG) 700 series appliances, including chassis specifications and components; general safety standards; and instructions for installing, connecting, and replacing an appliance.At a Glance (see page 5)Components and Specifications (see page 7)Plan and Install1Return Hardware (see page 22)

~|}ïï),2!"/3& "01"46||"/&"0At a Glanceïï51 At a GlanceThe Versa Cloud Services Gateway (CSG) 700 series appliances deliver highly secure site-to-site data connectivity to 0*))+!*"!&2*0&7"!20&+"00"0+!1,%,*",##& "0%"0"--)&+ "0-/,3&!"1%"#,)),4&+$#"12/"0ïUnified board design that supports different CPUs and memory sizesUp to 10 Ethernet ports including: ,2/2&)1&+}&$&1-"/0" ,+!¡¢1%"/+"1,3"/ ,--"/¡,¢-,/10ïTwo 1-GB EoC or SFP ports, available through separate interfaces ,2/},4&1%,4"/,3"/1%"/+"1¡,¢-,/10ï3&))"&#"14,/(+1"/# "/!¡¢ module is installed +!21,04&1 %)"ïEoC portsTwo USB ports for plugging in external LTE or WiFi modemsPoE source support on four Ethernet portsTwo built-in wireless slotsGPS connector for geographical locationExternal AC power supply "+0&+$1,+0" 2/&16), (1,-%60& ))6), (!,4+1%"--)&+ "ïFanless designFixed chassis with no field-replaceable parts "0(1,-*,2+1,// (*,2+1)"&+}/ (1.1 CSG700 Appliance ModelsThe CSG700 appliances are available in the following models:CSG730CSG750CSG770The CSG 700 appliance models differ only in CPU, memory, and storage size. See Table 1.Table 1: CSG700 Appliance ModelsCSG Appliance ModelCPU Memory StorageCSG730 Intel Denverton with 2 cores4 GB DRAM 32 GBCSG750 Intel Denverton with 4 cores8 GB DRAM 64 GBCSG770 Intel Denverton with 8 cores16 GB DRAM 128 GB1.2 Chassis ViewsFigure 1 and Figure 2 show the front and rear panels of the CSG730 appliance. The panels for the CSG750 and CSG770 appliances are identical to the CSG730 appliance.Note: The front panel is the side of the appliance with the SIM slots and two LEDs, for status and power. This is the side that is visible when you install the appliance in an office environment. The rear panel has the power and

~|}ïï),2!"/3& "01"46||"/&"0At a Glanceïï6reset buttons and various connectors and ports. This is the side that is visible when you mount the appliance in a 19-inch rack.Figure 1: Front Panel of the CSG730 ApplianceFigure 2: Rear Panel of the CSG730 Appliance

~|}ïï),2!"/3& "01"46||"/&"0Components and Specificationsïï72 Components and SpecificationsA CSG700 series appliance chassis is made of aluminum for optimal heat dissipation.Table 1 lists the specifications for a CSG700 series chassis.Table 1: CSG700 Series Chassis SpecificationsItem SpecificationServices and Slot DensityRJ-45 ports 10/100/1000 Mbps 4 + 2SFP Ethernet ports 2External USB ports (USB 2.0) 2RJ-45 serial console port 1Memory DDR4 ECC DRAM CSG730: 4 GBCSG750: 8 GBCSG770: 16 GBDisk 1 SSD, M.2 SATA-based 1Disk 1 SSD default size CSG730: 32 GBCSG750: 64 GBCSG770: 128 GBDisk 2 and Disk 3, USB-based FlexiblePower supply AC inputPower SpecificationsAC input voltage }||~|,)10AC input line frequency ||7Typical power consumption with PoE disabled35 WattsTypical power consumption with PoE enabled60 WattsChassis Physical SpecificationsChassis height 1.73" (4.4 cm)

~|}ïï),2!"/3& "01"46||"/&"0Components and Specificationsïï8Item SpecificationChassis width 8.75" (22 cm)Chassis depth 13.25" (33.6 cm)Rack height 1 RUChassis weight 5.84 lb (2.65 kg)Package SpecificationsPackage height 7" (17.78 cm)Package width 16.7" (42.4 cm)Package depth 12" (30.48 cm)Operating ConditionsTemperature 0 to 35°C (32 to 95°F) at sea levelHumidity 10 to 85% relative humidityAltitude Maximum 3000 m (10000 ft)Noise level 0 dBmStorage ConditionsTemperature 20 to 70°C (68 to 158°F) at sea levelHumidity 10 to 85% relative humidityReliabilityMTBF Minimum of 200,000 hoursRegulatory ComplianceSafety CE MarketingSecurity TPM 2.0Designed to be FIPS 140-2 Level 2 compliantEMC FCC Part 15, Class AEnvironmental RoHS

~|}ïï),2!"/3& "01"46||"/&"0Components and Specificationsïï92.1 Front and Rear Panel ComponentsThis article describes the front and rear panel components of a CSG700 series appliance. For the exact location of these components on the appliance, see At a Glance (see page 5).2.1.1 Front PanelThe front panel of a CSG700 series appliance has two status LEDs and two SIM card slots.2.1.1.1 LEDsTable 1 lists the LEDs, their colors and states, and the status they indicate.Table 1: Front Panel LEDs in a CSG700 Series ApplianceLED Color StatusPower Green Off: Appliance is not powered on.Green: Appliance is powered on.Status Green, Red Off: Appliance hardware is up, but there is a problem with the software.Solid green: Appliance is up and running.Blinking green: Appliance is in the process of booting up.Red: Major error condition exists in the system or there is a corrupt software configuration.Blinking red: System crash, overheating, or a persistent error condition exists.2.1.1.2 SIM Card SlotsThe front panel of a CSG700 series appliance has two nano-SIM card slots. If you subscribe to a single wireless service, use the SIM 1 slot to install the LTE device. If you are subscribing to dual wireless service, use both the SIM 1 and SIM 2 slots to activate the LTE devices.Note: It is strongly recommended that you use only preactivated SIMs in the SIM card slots.2.1.2 Rear PanelThe rear panel of a CSG700 series appliance has six status LEDs, power and reset buttons,ï"+0&+$1,+0" 2/&16 ), (0),1+!+&+-21#,/+1"++ï

~|}ïï),2!"/3& "01"46||"/&"0Components and Specificationsïï102.1.2.1 LEDsThe rear panel of a CSG700 series appliance has six LEDs located in two rows.Table 2 lists the LEDs, their color and states, and the status they indicate.Table 2: Rear Panel LEDs in a CSG700 Series ApplianceLED Color StatusPower Green Off: Appliance is not powered on.Green: Appliance is powered on.Status Green, Red Off: Appliance hardware is up but there is a problem with the software.Solid green: Appliance is up and running.Blinking green: Appliance is in the process of booting up.Solid red: Major error condition exists in the system or there is a corrupt software configuration.Blinking red: System crash, over heating, or a persistent error condition exists.Wireless White Off: Wireless module not installed.Solid white: Wireless module is up and running.Blinking white: Wireless module is booting up or there is traffic on the wireless module.LTE White Off: LTE module not installed, or there is a major hardware problem.Solid white: LTE module is up and running.Blinking white: LTE module is booting up or there is traffic on the LTE module.2.1.2.2 Power ButtonThe Power button on the rear panel of a CSG700 series appliance turns the power on and off.To turn the power on, press and immediately release the Power button when the appliance is off.To turn the power off, press the Power button when the appliance is on. If you press and immediately release the button, the appliance shuts down gracefully. If you press and hold the button for a longer period, it turns off power to the appliance ands shuts it down.

~|}ïï),2!"/3& "01"46||"/&"0Components and Specificationsïï112.1.2.3 Reset ButtonThe Reset button on the rear panel of a CSG700 series appliance resets the appliance. The reset functionality depends on the number of time you press it, as described in Table 3.The Reset button is recessed so that it is not accidentally pressed while the appliance is operational.To press the Reset button, use a sharp narrow tool. Each time you press the Reset button, you hear a buzzer sound.Table 3: Reset Button Press BehaviorNumber of Presses Behavior2 Reset the appliance to the factory-default snapshot.4 Reset the appliance to the branch prestaging configuration.6 Reset the appliance to the branch staging configuration.8 Reset the appliance to branch post-staging configuration.2.1.2.4 Kensington Security LockThe Kensington security lock on he rear panel of a CSG700 series appliance is a small metal-enforced hole for attaching a Kensington lock to secure the appliance.2.1.2.5 GPS InputThe GPS antenna input on the rear panel of a CSG700 series appliance allows you to connect an external GPS antenna. When you connect a GPS antenna to the appliance, it automatically identifies the geographical location of the unit, allowing you to detect any theft or movement of the appliance. Knowing the precise location of the unit also enables Versa Director to provision devices when the serial number is not mandated for the zero-touch provisioning (ZTP) process.2.2 Network Interface Card ModulesThe CSG700 series appliance offers interface modularity, providing four Ethernet ports that support two types of NICs:1-GB Ethernet over copper (EoC) port1-GB EoC with PoE port%"#,2/1%"/+"1-,/10,+1%"*,!2)"/")")"!,/11,,/1ïFigure 1 shows the four RJ-45 connectors for the four Ethernet ports. (1-GB EoC port and for the 1-GB EoC with PoE port.)Figure 1: RJ-45 Connectors for 1-GB EoC Port With or Without PoE Port

~|}ïï),2!"/3& "01"46||"/&"0Components and Specificationsïï12Figure 2 shows the four RJ-45 connectors/SFP slots for the 1-GB EoC/SFP combination port.Figure 2: RJ-45 Connectors or SFP Slots for 1-GB EoC/SFP Combination Port2.3 Interface NumberingFigure 1 shows the mapping of the Ethernet ports to Virtual Network Interface (VNI) numbering.Figure 3: Port-to-VNI Mapping2.4 Power Supply and AirflowThis article describes the AC power supply, AC power cord specifications, and airflow requirements for CSG700 appliances.2.4.1 AC Power Supply for CSG700 Series AppliancesBy default, CSG700 series appliances ship with one AC power supply unit.If you order the CSG700 series appliance with the power over Ethernet (PoE) NIC module, an additional power supply unit ships with the appliance.Table 1 describes the AC power supply specifications for each power supply unit.

~|}ïï),2!"/3& "01"46||"/&"0Components and Specificationsïï13Table 1: CSG700 Series Appliance AC Power Supply SpecificationsItem SpecificationAC input voltage }||~|,)10AC input line frequency ||7Typical power consumption with PoE disabled35 WattsTypical power consumption with PoE enabled60 Watts2.4.2 Airflow RequirementsThe CSG700 series appliance is made of aluminum for optimal heat dissipation.The appliance has no fans, to minimize noise and to maximize the life of the appliance. Cooling occurs by natural &/#),41%/,2$%1%"3"+10,+1%"1,-,#1%"--)&+ "ïWhen planning your site for installing a CSG700 series appliance in a 19-inch rack, allow a minimum of 0.5 RU space above the appliance to allow hot air to flow out of the appliance. However, itt is recommended that you allow 1 RU space above the appliance for cooling.When placing a CSG700 series appliance on a desk, ensure that the vents on the top of the unit are never blocked, to allow hot air to flow out of the appliance. Covering the vents prevents heat from dissipating out of the appliance, which will cause the chassis to overheat and then shut down.

~|}ïï),2!"/3& "01"46||"/&"0Planning and Installationïï143 Planning and InstallationThis article provides general safety standards and warnings regarding to installing or connecting a CSG 700 series appliances.3.1 General Safety GuidelinesCaution: Before installing or removing a CSG700 series appliance, ensure that the appliance chassis is electrically connected to ground. When you are installing or removing an appliance, ensure that you wear an ESD grounding wrist strap. To put the ESD grounding strap on properly, attach it to an ESD point and then place the other end of the strap around your bare wrist, making good skin contact. Failure to use an ESD grounding strap could damage the appliance.Install the CSG700 series appliance in compliance with the following local, national, and international electrical codes: +&1"!11"0 1%"/ ,2+1/&"0+!Locate the emergency power-off switch in the installation area. In case of an electrical accident, turn off the power quickly.Disconnect power to the appliance before installing or removing it.Disconnect power from the circuit that is being used for the appliance.If hazardous conditions exist, do not work alone.If you are working under conditions that might be hazardous to the eyes, wear safety glasses or goggles.3.2 Federal Communication Commission Interference StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including &+1"/#"/"+ "1%1*6 20"2+!"0&/"!,-"/1&,+ïThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.ï21&,+: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.%&01/+0*&11"/*201+,1" ,)), 1"!,/,-"/1&+$&+ ,+'2+ 1&,+4&1%+6,1%"/+1"++,/1/+0*&11"/ïRadiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.Class A

~|}ïï),2!"/3& "01"46||"/&"0Planning and Installationïï153.3 Prepare the Site for InstallationTo prepare your site for installing a CSG700 series appliance, follow the guidelines and requirements listed in this article.3.3.1 Site Preparation GuidelinesInstall the appliance in an enclosed and secure environment, and allow only authorized personnel to access the device.Keep the area around the appliance free from dust and conductive material.Follow ESD prevention procedures to avoid any damage to the appliance.3.3.2 Environmental RequirementsEnsure that the area in which you operate the appliance has adequate air circulation so that the cooling system functions normally. Ambient air temperature may not be sufficient to cool the chassis to acceptable operating temperatures without adequate circulation.Avoid temperature extremes.High humidity conditions can cause moisture to penetrate into the chassis. The appliance can operate in relative humidity of 10% to 85%, non-condensing.3.3.3 Rack RequirementsYou can mount a CSG700 series appliance in a 19-inch four-post rack using slide rails. Table 1 lists the rack requirements.Table 1: Rack Requirements for a CSG700 Series ApplianceRequirement GuidelinesRack type Use a 19-inch four-post rack that has bracket holes spaced at 1 U (1.75 in. or 4.45 cm) increments, and that has panels strong enough to support the weight of the appliance.Rack size Comply with the size and strength standards of a 19-inch rack. Ensure that the rack rails are spaced wide enough to accommodate the external dimensions of the appliance chassis. Ensure that the spacing of rails and the adjacent racks allows for proper clearance around the appliance and the rack.Rack firmly secured to building structureSecure the rack to floor brackets and to ceiling brackets to ensure maximum stability.3.3.4 Airflow RequirementsA CSG700 series appliance has a fanless design and cools by airflow through the vents on the top of the appliance.

~|}ïï),2!"/3& "01"46||"/&"0Planning and Installationïï16When planning your site for installing a CSG700 series appliance in a 19-inch rack, allow a minimum of 0.5 RU space above the appliance to allow hot air to flow out of the appliance. However, itt is recommended that you allow 1 RU space above the appliance for cooling.When placing a CSG700 series appliance on a desk, ensure that the vents on the top of the unit are never blocked, to allow hot air to flow out of the appliance. Covering the vents prevents heat from dissipating out of the appliance, which will cause the chassis to overheat and then shut down.3.4 Install a CSG700 Series ApplianceThis article provides instructions about how to unpack a CSG700 series appliance and mount it in a 19-inch rack.3.4.1 Unpack a CSG700 Series ApplianceThe CSG700 series appliance is packed in a plastic box, and it is shipped in a cardboard carton, secured with foam packing material. The carton also contains an accessory box.ïIt is recommended that you unpack the appliance only when you are ready to install it.To unpack a CSG700 series appliance:1. Open the top flaps of the cardboard carton.2. Remove from the box the foam packing material holding the appliance and the accessories in place. See Figure 1.3. Remove the accessory box and the appliance from the foam packing material.4. Remove the accessories from the accessories box.5. Verify the components against the packing list that is included in the box.Figure 1: Unpacking a CSG700 Series Appliance

~|}ïï),2!"/3& "01"46||"/&"0Planning and Installationïï172 https://docs.versa-networks.com/display/201/Replace+HardwareNote: It is recommended that you save the shipping carton and packing material when unpacking the appliance, in case you need to later move the appliance or return it. See Return Hardware2.3.4.2 Packing List for a CSG700 Series ApplianceThe cardboard carton in which a CSG700 series appliance is shipped contains a packing list. Check the packing list against the parts that you receive in the shipping carton. Table 1 lists the parts shipped with a CSG700 series appliance.Table 1: Parts Shipped with a CSG700 Series ApplianceComponent QuantityCSG700 series appliance chassis 1AC power adapter 1

~|}ïï),2!"/3& "01"46||"/&"0Planning and Installationïï18Component QuantityPower cable 165 Watt PoE power adapter (included with PoE NIC module only) 1Cat 6 cable 1Cat 5e cable 1LTE antenna (included with LTE module only) 2 for single LTE module4 for dual LTE moduleWiFi antenna (included with WiFi module only) 2GPS antenna 1Rack-mounting ears 2Screws for mounting ears 83.4.3 Mount a CSG700 Series Appliance in a RackYou can mount a CSG700 series appliance in a four-post 19-inch rack. Two people are required to mount the appliance.To mount the appliance, ensure that you have the following tools: 2*"/~%&))&-0¡Ì¢ï0 /"4!/&3"/Tape measureTo mount a CSG700 series appliance in a four-post 19-inch rack:1. Place the appliance chassis on a flat, stable surface.2. Check the internal dimensions of the rack with a tape measure. The appliance is 22 cm wide (about 8.6 inches wide) and must fit within the mounting posts.3. Allow a minimum of 0.5 RU space above the appliance for airflow, to allow hot air to flow out. However, it is recommended that you allow 1 RU space above the appliance.Figure 2: Space a CSG700 Series Appliance when Rack Mounting

~|}ïï),2!"/3& "01"46||"/&"0Planning and Installationïï194. Attach the two mounting ears to each side of the appliance chassis using the eight mounting ear screws that /"0%&--"!4&1%1%"--)&+ "0"#,2/0 /"401,11 %" %*,2+1&+$"/ï&$2/"11 %1%",2+1&+$/01,||"/&"0--)&+ "ï5. Grasp both sides of the appliance chassis, making sure that the front of the chassis is facing you.6. Stand in front of the rack and lift the chassis. Then, gently insert the chassis into the rack and slide it as far  (0-,00&)"ï&$2/"+0"/1&+$||"/&"0--)&+ "&+1,1%" (ï

~|}ïï),2!"/3& "01"46||"/&"0Planning and Installationïï207. Have the second person secure the mounting ears to the front of the rack using the rack-mount screws that /"0%&--"!4&1%1%"--)&+ "+0"/1+!1%"+1&$%1"+1%"0 /"40ïFigure 5: Secure the Mounting Ears to the Rack3.5 Connect a CSG700 Series ApplianceThis article describes how to connect a CSG700 series appliance to an AC power source and to a management console.

~|}ïï),2!"/3& "01"46||"/&"0Planning and Installationïï213.5.1 Step 1: Connect Earth Ground to a CSG700 Series ApplianceTo ensure proper operation of a CSG700 series appliance and to meet safety and electromagnetic interference (EMI) requirements, you must connect the appliance to earth ground before you connect power to the appliance.If you use a three-prong power cable to connect power to a CSG700 series appliance, the power cable provide the ground connection.If you use a twoprong power cable to connect power to a CSG700 series appliance, connect the appliance to earth ground before you connect power to the appliance:1. Connect one end of the grounding cable to a proper earth ground, such as the rack in which the CSG700 series appliance is mounted.2. Secure the grounding lug to the protective grounding terminal with washers and screws.3.5.2 Step 2: Connect AC Power to a CSG700 Series ApplianceBefore you begin connecting AC power to a CSG700 series appliance, ensure that you have:Electrostatic discharge (ESD) wrist strap.AC power cord shipped with the appliance. The cord has plugs appropriate for your geographical location.To connect a CSG700 series appliance to an AC power source:1. Attach one end of the ESD grounding strap to your bare wrist, and connect the other end to the ESD point on the rack.2. Plug one end of the AC power cord into the power supply in the appliance.3. Plug the other end of the AC power cord into an AC power source outlet.4. Plug the DC end of the power supply unit into the back of the CSG700 series appliance.3.5.3 Step 3: Connect a CSG700 Series Appliance to a Management ConsoleYou can configure and manage a CSG700 series appliance using a management console. To connect a CSG700 series appliance to a management console, use the console port on the appliance, which accepts a cable with an RJ-45 connector.To connect a CSG700 series appliance to a management console:1. Plug one end of the console cable into the console port located on the rear panel of the CSG700 series appliance.2. Plug the other end of the cable into the console server or into a management console.

~|}ïï),2!"/3& "01"46||"/&"0Return Hardwareïï224 Return HardwareThis article describes how to return a CSG700 series appliance for return or replacement.4.1 Locate the Model and Serial NumberTo return a CSG700 series appliance to Versa Networks, you need the model and serial number of the appliance. These numbers are printed on the shipping box and on the unit label located on the bottom of the appliance.4.2 Obtain an Return Material AuthorizationIf you are returning an appliance to Versa Networks, open a support case with the Versa Networks Customer Support team and obtain a Return Material Authorization (RMA) number. Before you open a case and request an RMA number, have the following information ready:Your existing case number, if anySerial and model numbers of the appliancePhysical location of the applianceYour name, organization name, telephone number, fax number, and shipping addressFailure or problem description with detailsTo obtain an RMA number:1. Open a support case with Versa Networks in one of the following ways:,$&+1,ïhttps://support.versa-networks.com/support/login.))1,))#/""}}|2. A customer support representative will validate your case and issue an RMA number for use to use when returning the appliance to Versa Networks.4.3 Repack the ApplianceTo return a CSG700 series appliance, repack it in its original packing. You need the following tools to do this:Phillips Number 2 (+) screwdriverOriginal cardboard carton in which you received the applianceTo repack the appliance in its original packing:1. Shut down the CSG700 series appliance.2. Disconnect power to the appliance and remove all cables.3. If the appliance is mounted in a 19-inch rack, unscrew the mounting ears and gently slide the chassis out of the rack.4. Place the chassis in the plastic packing bag.5. Secure the chassis in the cardboard carton, placing the side packing foam on both sides of the appliance chassis and the top packing foam over the top.6. Close the cardboard carton and seal it with packing tape.7. Write the RMA number on the shipping label or on the outside of the box for tracking purposes.4.4 Return Hardware

Navigation menu