Siemens RF350R01 RFID System User Manual SIMATIC RF300

Siemens AG RFID System SIMATIC RF300

Users Manual 2 of 4

Readers 5.2 SIMATIC RF310R with IQ-Sense interface SIMATIC RF300 100 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 5.2 SIMATIC RF310R with IQ-Sense interface 5.2.1 Features RF310R with IQ-Sense Characteristics Design ① IQ-Sense interface ② Status display Field of application Identification tasks on small assembly lines in harsh industrial environments Read/write distance to transponder Max. 35 mm  Data transmission rate  Read: approx. 50 bytes/s  Write: approx. 40 bytes/s Note SIMATIC RF310R with IQ-Sense interface is not suitable for combining with ISO tags. 5.2.2 Ordering data of RF310R with IQ-Sense interface RF310R Order number  With IQ-Sense interface  IP67  Operating temperature: -25 °C to +70 °C  Dimensions: 55 x 75 x 30 (L x W x H, in mm)  with integrated antenna  Max. limit distance: 35 mm (depending on transponder) 6GT2801-0AA00 5.2.3 Pin assignment of RF310R IQ-Sense interface Table 5- 1 Pin assignment of RF310R with IQ-Sense interface Pin Pin, device end, 4-pin M12 Assignment 1 IQ-Sense 2 Not assigned 3 IQ-Sense
Readers 5.2 SIMATIC RF310R with IQ-Sense interface SIMATIC RF300 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 101 Pin Pin, device end, 4-pin M12 Assignment  4 Not connected 5.2.4 Display elements of the RF310R reader with IQ-Sense interface Color Meaning Green Operating voltage available yellow Transponder present Red Error occurred (see FC35 documentation, Section "Error messages and troubleshooting", Subsection "Error messages, error_MOBY") 5.2.5 Ensuring reliable data exchange The "center point" of the transponder must be situated within the transmission window. 5.2.6 Metal-free area The RF310R can be flush-mounted in metal. Please allow for a possible reduction in the field data values. DDDD6,0$7,&5)5 Figure 5-1 Metal-free area for RF310R To avoid any impact on the field data, the distance a should be ≥ 20 mm.
Readers 5.2 SIMATIC RF310R with IQ-Sense interface SIMATIC RF300 102 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 5.2.7 Minimum distance between RF310R readers 'D'E5)56,0$7,&5)56,0$7,&5)56,0$7,& Da ≥ 100 mm Db ≥ 100 mm Figure 5-2 Minimum distance between RF310R readers 5.2.8 Technical data for RF310R reader with IQ-Sense interface Table 5- 2 Technical specifications for RF310R reader with IQ-Sense interface Inductive interface to the transponder Transmission frequency for power/data 13.56 MHz Interface to SIMATIC S7-300 Required master module RFID channels (RF310R) Mixed operation with other profiles IQ-Sense, 2-wire non-polarized 8-IQ-Sense (6ES7 338-7XF00-0AB0) max. 2 per master module, max. 4 Opto-BEROs, 1x SIMATIC RF310R Cable length reader - communication module Max. 50 m (unshielded cable) Read/write distances of reader See Chapter Field data of RF300 transponders (Page 41) Minimum distance between two RF310R readers ≥ 100 mm Data transfer rate for read/write device Reading Writing Approx. 50 byte/s Approx. 40 byte/s Passing speed Reading Writing Approx. 0.8 m/s (2 bytes) Approx. 0.8 m/s (2 bytes) Function Read, write, initialize transponder Multi-tag No Power supply via IQ-Sense master module 24 V DC
Readers 5.2 SIMATIC RF310R with IQ-Sense interface SIMATIC RF300 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 103 Display elements 2-color LED (operating voltage, presence, error) Plug-in connector M12 (4-pin) Enclosure Dimensions (in mm) Color Material 55 x 75 x 30 (without M12 enclosure connector)Anthracite Plastic PA 12 Fixing 4 x M5 screws Ambient temperature during operation during transport and storage -25°C to +70°C -40°C to +85°C Degree of protection to EN 60529 Shock to EN 60721-3-7 Class 7 M2 Vibration to EN 60721-3-7 Class 7 M2 IP67 50 g 20 g Weight Approx. 150 g MTBF (Mean Time Between Failures) in years 153.5 Approvals Radio to R&TTE guidelines EN 300 330, EN 301 489, CE, FCC, UL/CSA Current consumption Typ. 40 mA 5.2.9 FCC information Siemens SIMATIC RF300 with IQ-Sense interface FCC ID: NXW-RF310R-IQ This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Readers 5.3 SIMATIC RF310R with RS422 interface SIMATIC RF300 104 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 5.2.10 Dimension drawing  6,0$7,&5)5 Figure 5-3 Dimension drawing for RF310R Dimensions in mm 5.3 SIMATIC RF310R with RS422 interface 5.3.1 Features RF310R with RS422 Characteristics Design ① RS422 interface ② Status display Field of application Identification tasks on small assembly lines in harsh industrial environments Read/write distance to transponder Max. 90 mm RF300 tags ISO tags  Data transmission rate Read write Approx. 8000 byte/s Approx. 8000 byte/s Approx. 600 byte/s Approx. 400 byte/s
Readers 5.3 SIMATIC RF310R with RS422 interface SIMATIC RF300 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 105 5.3.2 Ordering data for RF310R with RS422 interface RF310R Order number  With RS422 interface (3964R)  IP 67  Operating temperature: -25 °C to +70 °C  Dimensions: 55 x 75 x 30 (L x W x H, in mm)  with integrated antenna  Max. limit distance: 35 mm (depending on transponder) 6GT2801-1AB10 5.3.3 Pin assignment of RF310R RS422 interface Pin Pin Device end 8-pin M12 Assignment 1 + 24 V 2 - Transmit 3 0 V 4 + Transmit 5 + Receive 6 - Receive 7 Free  8 Earth (shield) 5.3.4 Display elements of the RF310R reader with RS422 interface Color Meaning Flashing Operating voltage present, reader not initialized or antenna switched off Green Permanently on Operating voltage present, reader initialized and antenna switched on Yellow1) Transponder present Flashing red Error has occurred, the type of flashing corresponds to the error code in the table in Section "Error codes". The optical error display is only reset if the corresponding reset parameter ("option_1", see FC45 / FB45 documentation, Section "Input parameters") is set. 1) Only in the "with presence" mode. 5.3.5 Ensuring reliable data exchange The "center point" of the transponder must be situated within the transmission window.
Readers 5.3 SIMATIC RF310R with RS422 interface SIMATIC RF300 106 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 5.3.6 Metal-free area The RF310R can be flush-mounted in metal. Please allow for a possible reduction in the field data values. DDDD6,0$7,&5)5 Figure 5-4 Metal-free area for RF310R To avoid any impact on the field data, the distance a should be ≥ 20 mm. 5.3.7 Minimum distance between RF310R readers 'D'E5)56,0$7,&5)56,0$7,&5)56,0$7,& Da ≥ 100 mm Db ≥ 200 mm Figure 5-5 Minimum distance between RF310R readers
Readers 5.3 SIMATIC RF310R with RS422 interface SIMATIC RF300 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 107 5.3.8 Technical specifications of the RF310R reader with RS422 interface Table 5- 3 Technical specifications of the RF310R reader with RS422 interface Inductive interface to the transponder Transmission frequency for power/data 13.56 MHz Antenna integrated Interface to the communication module RS422 (3964R protocol) Baud rate 19200 baud, 57600 baud, 115200 baud Cable length reader - communication module Data cable length max. 1000 m (shielded cable) Read/write distances of reader See Chapter Field data of RF300 transponders (Page 41) Minimum distance between two RF310R readers ≥ 100 mm or ≥ 200 mm RF300 tags ISO tags Maximum data transmission range, reader - transponder (tag) Read write Approx. 8000 bytes/s Approx. 8000 bytes/s Approx. 600 bytes/s Approx. 400 bytes/s Functions Initialize/read/write transponder Scan status and diagnostics information Switch antenna on/off Repeat command Scan transponder serial numbers Power supply 24 V DC Display elements 2-color LED (operating voltage, presence, error) Plug-in connector M12 (8-pin) Enclosure Dimensions (in mm) Color Material 55 x 75 x 30 (without M12 plug connector) Anthracite Plastic PA 12 Fixing 4 x M5 screws Ambient temperature during operation during transport and storage -25 °C to +70 °C -40 °C to +85 °C Degree of protection to EN 60529 Shock to EN 60721-3-7 Class 7 M2 Vibration to EN 60721-3-7 Class 7 IP67 50 g 20g Weight Approx. 170 g MTBF (Mean Time Between Failures) in years 169.9 Approvals Radio to R&TTE guidelines EN 300 330, EN 301 489, CE, FCC, UL/CSA Current consumption Typ. 50 mA
Readers 5.3 SIMATIC RF310R with RS422 interface SIMATIC RF300 108 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 5.3.9 FCC information Siemens SIMATIC RF310R with RS422 interface FCC ID: NXW-RF310R This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 5.3.10 Dimension drawing  6,0$7,&5)5 Figure 5-6 Dimension drawing for RF310R Dimensions in mm
Readers 5.4 SIMATIC RF340R SIMATIC RF300 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 109 5.4 SIMATIC RF340R 5.4.1 Features RF340R Characteristics Design ① RS422 interface ② Status display Field of application Identification tasks on assembly lines in harsh industrial environments Read/write distance to transponder Max. 65 mm RF300 tags ISO tags   Data transmission rate Read Write  approx. 8000 byte/s  approx. 8000 byte/s 5.4.2 Ordering data for RF340R RF340R Order number  With RS422 interface (3964R)  IP 67  Operating temperature -25 °C … +70 °C  Dimensions 75 x 91 x 41 (L x W x H in mm)  with integrated antenna  Max. limit distance: 65 mm (depending on transponder) 6GT2801-2AB10 5.4.3 Pin assignment of RF340R RS422 interface Pin Pin Device end 8-pin M12 Assignment 1 + 24 V 2 - Transmit 3 0 V 4 + Transmit 5 + Receive 6 - Receive  7 Free
Readers 5.4 SIMATIC RF340R SIMATIC RF300 110 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 Pin Pin Device end 8-pin M12 Assignment 8 Earth (shield) 5.4.4 Display elements of the RF340R reader Color Meaning Flashing Operating voltage present, reader not initialized or antenna switched off Green Permanently on Operating voltage present, reader initialized and antenna switched on Yellow1) Transponder present Flashing red Error has occurred, the type of flashing corresponds to the error code in the table in Section "Error codes". The optical error display is only reset if the corresponding reset parameter ("option_1", see FC45 / FB45 documentation, Section "Input parameters") is set. 1) Only in the "with presence" mode. 5.4.5 Ensuring reliable data exchange The "center point" of the transponder must be situated within the transmission window. 5.4.6 Metal-free area The RF340R can be flush-mounted in metal. Please allow for a possible reduction in the field data values. 6,0$7,&DDDD5)5 Figure 5-7 Metal-free area for RF340R To avoid any impact on the field data, the distance a should be ≥ 20 mm.
Readers 5.4 SIMATIC RF340R SIMATIC RF300 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 111 5.4.7 Minimum distance between RF340R readers 'D'E5)55)5 5)5 Da ≥ 100 mm Db ≥ 250 mm Figure 5-8 Minimum distance between RF340R readers 5.4.8 Technical data of the RF340R reader Table 5- 4 Technical specifications of the RF340R reader Inductive interface to the transponder Transmission frequency for power/data 13.56 MHz Antenna integrated Interface to the communication module RS422 (3964R protocol) Baud rate 19200 baud, 57600 baud, 115200 baud Cable length reader - communication module Data cable length max. 1000 m (shielded cable) Read/write distances of reader See Chapter Field data of RF300 transponders (Page 41) Minimum distance between two RF340R readers ≥ 100 mm or ≥ 250 mm RF300 tags ISO tags Maximum data transfer rate reader - transponder (tag) Reading Writing Approx. 8000 byte/s Approx. 8000 byte/s Functions Initialize/read/write transponder Scan status and diagnostics information Switch antenna on/off Repeat command Scan transponder serial numbers Power supply 24 V DC
Readers 5.4 SIMATIC RF340R SIMATIC RF300 112 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 Display elements 2-color LED (operating voltage, presence, error) Plug connector M12 (8-pin) Enclosure Dimensions (in mm) Color Material 75 x 75 x 40 (without M12 device connector) Anthracite Plastic PA 12 Fixing 2 x M5 screws Ambient temperature during operation during transport and storage -25 °C to +70 °C -40 °C to +85 °C Degree of protection to EN 60529 Shock to EN 60721-3-7 Class 7 M2 Vibration to EN 60721-3-7 Class 7 M2 IP67 50 g 20 g Weight Approx. 250 g MTBF (Mean Time Between Failures) in years 140 Approvals Radio to R&TTE guidelines EN 300 330, EN 301 489, CE, FCC, UL/CSA Current consumption Typ. 100 mA 5.4.9 FCC information Siemens SIMATIC RF340R (MLFB 6GT2801-2AA10) FCC ID: NXW-RF340R Siemens SIMATIC RF340R (MLFB 6GT2801-2AB10) FCC ID: NXW-RF340R01 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Readers 5.5 SIMATIC RF350R SIMATIC RF300 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 113 5.4.10 Dimension drawing 6,0$7,&5)5 Figure 5-9 Dimension drawing for RF340R Dimensions in mm 5.5 SIMATIC RF350R 5.5.1 Features RF350R Characteristics Design ① Antenna connection ② RS422 interface ③ Status display Field of application Identification tasks in assembly lines in harsh industrial environments; for external antennas (ANT 1, ANT 18, ANT 30) Read/write distance to transponder Max. 60 mm Data transmission rate RF300 tags ISO tags
Readers 5.5 SIMATIC RF350R SIMATIC RF300 114 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 RF350R Characteristics  Read Write  Read: approx. 8000 byte/s  Write: approx. 8000 byte/s 5.5.2 Ordering data for RF350R RF350R Order number  With RS422 interface (3964R)  IP65  Operating temperature: -25 °C … +70 °C  Dimensions: 75 x 96 x 41 (L x W x H, in mm)  For pluggable antennas ANT 1, ANT 12, ANT 18, ANT 30 6GT2801-4AB10 5.5.3 Pin assignment of RF350R RS422 interface Pin Pin Device end 8-pin M12 Assignment 1 + 24 V 2 - Transmit 3 0 V 4 + Transmit 5 + Receive 6 - Receive 7 Free  8 Earth (shield)
Readers 5.5 SIMATIC RF350R SIMATIC RF300 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 115 5.5.4 Display elements of the RF350R reader Color Meaning Flashing Operating voltage present, reader not initialized or antenna switched offGreen Permanently on Operating voltage present, reader initialized and antenna switched on Yellow1) Transponder present Flashing red Error has occurred, the type of flashing corresponds to the error code in the table in Section "Error codes". The optical error display is only reset if the corresponding reset parameter ("option_1", see FC45 / FB45 documentation, Section "Input parameters") is set. 1) Only in the "with presence" mode. 5.5.5 Ensuring reliable data exchange The "center point" of the transponder must be situated within the transmission window. 5.5.6 Metal-free area The RF350R reader does not have an internal antenna. Operation is not affected by mounting on metal or flush-mounting in metal. For information about the metal-free area required by the external antennas, refer to the corresponding section of the chapter Antennas (Page 118). 5.5.7 Technical data of the RF350R reader Table 5- 5 Technical specifications of the RF350R reader Inductive interface to the transponder Transmission frequency for power/data 13.56 MHz Antenna External, antennas ANT 1, ANT 12, ANT 18 or ANT 30 Interface to the communication module RS422 (3964R protocol) Baud rate 19200 baud, 57600 baud, 115200 baud Cable length reader - communication module Data cable length max. 1000 m (shielded cable) Read/write distances of reader See Chapter Field data of RF300 transponders (Page 41) Minimum distance between two antennas See Chapter Minimum clearances (Page 47) RF300 tags ISO tags Maximum data transfer rate reader - transponder (tag) Reading Writing Approx. 8000 byte/s Approx. 8000 byte/s @ Werte
Readers 5.5 SIMATIC RF350R SIMATIC RF300 116 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 Functions Initialize/read/write transponder Scan status and diagnostics information Switch antenna on/off Repeat command Scan transponder serial numbers Power supply 24 V DC Display elements 2-color LED (operating voltage, presence, error) Plug connector M12 (8-pin); M8 (4-pin) for antenna Enclosure  Dimensions (in mm)  Color  Material  75 x 75 x 40 (without M12 device connector)  Anthracite  Plastic PA 12 Fixing 2 x M5 screws Ambient temperature  During operation  Transport and storage  -25 °C to +70 °C  -40 °C to +85 °C Degree of protection to EN 60529 Shock to EN 60721-3-7 Class 7 M2 Vibration to EN 60721-3-7 Class 7 M2 IP65 50 g 20 g Weight 250 g MTBF (Mean Time Between Failures) in years 140 Approvals Radio to R&TTE guidelines EN 300 330, EN 301 489, CE, FCC, UL/CSA Current consumption Typ. 100 mA 5.5.8 FCC information Siemens SIMATIC RF350R (MLFB 6GT2801-2AA10) FCC ID: NXW-RF350R Siemens SIMATIC RF350R (MLFB 6GT2801-2AB10) FCC ID: NXW-RF350R01 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Readers 5.5 SIMATIC RF350R SIMATIC RF300 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 117 6,0$7,&5)5 Figure 5-10 RF350R dimension drawing Dimensions in mm 5.5.9 Dimension drawingTo comply with FCC Part 15 Rules in the United States, the system must be professionally installed to ensure compliance with the Part 15 certification. It is the responsibility of the operator and professional installer to ensure that only certified systems are deployed in the United States. The use of the system in any other combination (such as colocated antennas transmitting the same information) is expressly forbidden.
Readers 5.5 SIMATIC RF350R SIMATIC RF300 118 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 5.5.10 Antennas 5.5.10.1 Features For the RF350R reader, you can use the following pluggable antennas: Antenna Product photo Limit distance Sg in mm 1) Dimensions (L x B x H) in mm Suitable for dynamic operation ANT 1 to 60 75 x 75 x 20 Yes ANT 12 M12 x 1.0 x 40 (∅ x thread x L) @ <--> Schreibweise wie bei den anderen Antennen? Klammer? ANT 18 to 13 Ø M18 x 50 No ANT 30 to 22 Ø M30 x 58 No 1) Depending on the transponder used ANT 1 The ANT 1 is an antenna in the mid performance range and can be used to the customer's advantage in production and assembly lines due to its manageable housing shape. The antenna dimensions make it possible to read/write large quantities of data dynamically from/to the tag during operation. The antenna cable can be connected at the reader end.
Readers 5.5 SIMATIC RF350R SIMATIC RF300 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 119 ANT 12 The ANT 12 is primarily envisaged for tool identification applications. The very small size of the antenna means that highly exact positioning is possible using the plastic nuts included in the scope of delivery. The antenna cable can be connected at the SLG end. Communication with the data storage unit is only possible with the MDS D421 in static mode. ANT 18 The ANT 18 is designed for use in small assembly lines. Due to its small, compact construction, the antenna can be easily positioned for any application using two plastic nuts (included in the package). The antenna cable can be connected at the reader end. Data communication is only possible with the RF320T and RF340T tags in static mode. ANT 30 The ANT 30 is designed for use in small assembly lines. In comparison to ANT 18, the maximum write/read distance is approximately 60 % larger. Due to its compact construction, the antenna can be easily positioned for any application using two plastic nuts (included in the package). The antenna cable can be connected at the reader end. With the RF320T, RF340T and RF350T tags, communication with the data storage unit is only possible in static mode. 5.5.10.2 Ordering data for antennas Antenna Order number ANT 1 6GT2398-1CB00 ANT 12 6GT2 398-1CC00 ANT 18 6GT2398-1CA00 ANT 30 6GT2398-1CD00 5.5.10.3 Ensuring reliable data exchange The "center point" of the transponder must be situated within the transmission window. 5.5.10.4 Metal-free area The antennas ANT 1, ANT 12, ANT 18 and ANT 30 can be flush-mounted on metal. Please allow for a possible reduction in the field data values. During installation, maintain the minimum distances (a and b) on/flush with the metal. NOTICE Reduction of range if the metal-free space is not maintained At values lower than a and b, the field data changes significantly, resulting in a reduction in the limit distance and operating distance. Therefore, during installation, maintain the minimum distances (a and b) on/flush with the metal.
Readers 5.5 SIMATIC RF350R SIMATIC RF300 120 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 Metal-free space for flush-mounted installation of ANT 1 0HWDODD a = 40 mm Figure 5-11 Metal-free area for ANT 1 Flush-mounting of ANT 12 02%<($17 Figure 5-12 Metal-free area for ANT 12 The ANT 12 can be flush-mounted in metal. Metal-free space for flush-mounted installation of ANT 18 EDD$17 a = 10 mm b = 10 mm Figure 5-13 Metal-free area for ANT 18
Readers 5.5 SIMATIC RF350R SIMATIC RF300 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 121 Metal-free space for flush-mounted installation of ANT 30 EDD$17 a = 20 mm b = 20 mm Figure 5-14 Metal-free area for ANT 30 5.5.10.5 Minimum distance between antennas Minimum distance for ANT 1 $17$17$17'D'E Da ≥ 100 mm Db ≥ 250 mm Figure 5-15 Minimum distance for ANT 1 The reader electronics can be mounted directly alongside each other.
Readers 5.5 SIMATIC RF350R SIMATIC RF300 122 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 Minimum distance for ANT 12 'D'E Da > 80 mm Db > 80 mm Figure 5-16 Minimum distance for ANT 12 Minimum distance for ANT 18 'D'E Da ≥ 100 mm Db ≥ 200 mm Figure 5-17 Minimum distance for ANT 18
Readers 5.5 SIMATIC RF350R SIMATIC RF300 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 123 Minimum distance for ANT 30 'D'E Da ≥ 100 mm Db ≥ 250 mm Figure 5-18 Minimum distance for ANT 30 5.5.10.6 Technical data for antennas Table 5- 6 Technical data for antennas ANT 1, ANT 12, ANT 18 and ANT 30 ANT 1 ANT 12 ANT 18 ANT 30 Read/write distance antenna to transponder (Sg) max 100 mm 5 mm 15 mm 22 mm Enclosure dimensions in mm 75 x 75 x 20 (L x W x H) M18 x 1.0 x 55 (∅ x thread x L)M18 x 1.0 x 55 (Ø x thread x L) M30 x 1.5 x 58 (Ø x thread x L) Color Anthracite Pale turquoise Material Plastic PA 12 Plastic Crastin Plug connection 4-pin (pins on antenna side) Antenna cable lengths 3 m Degree of protection to EN 60529 IP67 IP67 (front) Shock-resistant acc. to EN 60721-3-7, Class 7M2 Vibration-resistant to EN 60721-3-7, Class 7M2 50 g 1) 20 g ( 3 to 500 Hz) 1) Attachment of the antenna 2 x M5 screws 2 plastic nuts M12 x 1.0 2 plastic nuts M18 x 1.0 2 plastic nuts M30 x 1.5
Readers 5.5 SIMATIC RF350R SIMATIC RF300 124 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 ANT 1 ANT 12 ANT 18 ANT 30 Ambient temperature  During operation  Transport and storage -25 °C to +70 °C -40 °C to +85 °C MTBF (at +40 °C) 2.5 x 105 hours Approx. weight 80 g 45 g 120 g 150 g 1) Warning: The values for shock and vibration are maximum values and must not be applied continuously. 5.5.10.7 Dimension drawings for antennas All dimensions in mm &DEOHOHQJWKP0LQLPXPEHQGLQJUDGLXV$17FDQEHFRQQHFWHGDWUHDGHUHQG20 mm Figure 5-19 Dimension drawing for ANT 1 &DEOHOHQJWKP0LQLPXPEHQGLQJUDGLXV$17FDQEHFRQQHFWHGDWUHDGHUHQG$QWHQQDKHDG 6LGHYLHZRIDQWHQQDKHDG)LQHWKUHDGSLWFK$QWHQQDHQG$17PP0 Figure 5-20 Dimension drawing for ANT 12 &DEOHOHQJWKP0LQLPXPEHQGLQJUDGLXV$17FDQEHFRQQHFWHGDWUHDGHUHQG$QWHQQDKHDG 6LGHYLHZRIDQWHQQDKHDG)LQHWKUHDGSLWFK$QWHQQDHQG$17PP0 Figure 5-21 Dimension drawing for ANT 18
Readers 5.6 SIMATIC RF380R SIMATIC RF300 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 125 &DEOHOHQJWKP0LQLPXPEHQGLQJUDGLXV$17FDQEHFRQQHFWHGDWUHDGHUHQG$QWHQQDKHDG 6LGHYLHZRIDQWHQQDKHDG$QWHQQDHQG)LQHWKUHDGSLWFKPP $170 Figure 5-22 Dimension drawing for ANT 30 5.6 SIMATIC RF380R 5.6.1 Features RF380R Characteristics Design ① RS232 or RS422 interface ② Status display Field of application Identification tasks on assembly lines in harsh industrial environments Read/write distance to transponder Max. 210 mm RF300 tags ISO tags  Data transmission rate Read write Approx. 8000 byte/s Approx. 8000 byte/s Approx. 600 byte/s Approx. 400 byte/s 5.6.2 RF380R ordering data RF380R Order number  With RS422 interface (3964R)  IP67  Operating temperature: -25 °C … +70 °C  Dimensions: 160 x 96 x 40 (L x W x H, in mm)  with integrated antenna  max. limit distance 150 mm (dependent on transponder) 6GT2801-3AB10
Readers 5.6 SIMATIC RF380R SIMATIC RF300 126 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 5.6.3 Pin assignment of RF380R RS232/RS422 interface You can connect the RF380R reader to a higher-level system via the internal RS422 interface or via the RS232 interface. After connection, the interface module automatically detects which interface has been used. Note correct assignment of the pins here: Assignment Pin Pin Device end 8-pin M12 RS232 RS422 1 + 24 V + 24 V 2 RXD - Transmit 3 0 V 0 V 4 TXD + Transmit 5 NC + Receive 6 NC - Receive 7 not used not used  8 Earth (shield) Earth (shield) 5.6.4 Display elements of the RF380R reader Color Meaning Flashing Operating voltage present, reader not initialized or antenna switched offGreen Permanently on Operating voltage present, reader initialized and antenna switched on Yellow1) Transponder present Flashing red Error has occurred, the type of flashing corresponds to the error code in the table in Section "Error codes". The optical error display is only reset if the corresponding reset parameter ("option_1", see FC45 / FB45 documentation, Section "Input parameters") is set. 1) Only in the "with presence" mode. 5.6.5 Ensuring reliable data exchange The "center point" of the transponder must be situated within the transmission window.
Readers 5.6 SIMATIC RF380R SIMATIC RF300 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 127 5.6.6 Metal-free area The RF380R can be flush-mounted in metal. Please allow for a possible reduction in the field data values. DDDD6,0$7,&5)5 Figure 5-23 Metal-free area for RF380R To avoid any impact on the field data, the distance a should be ≥ 20 mm. 5.6.7 Minimum distance between RF380R readers 'D'E Da ≥ 400 mm Db ≥ 400 mm Figure 5-24 Minimum distance between RF380R readers
Readers 5.6 SIMATIC RF380R SIMATIC RF300 128 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 5.6.8 Technical specifications of the RF380R reader Table 5- 7 Technical specifications of the RF380R reader Inductive interface to the transponder Transmission frequency for power/data 13.56 MHz Antenna integrated Interface to the communication module RS232 or RS422 (3964R protocol) Baud rate 19200 baud, 57600 baud, 115200 baud Cable length reader - communication module RS422 data cable length: max. 1000 m RS232 data cable length: Max. 30 m Read/write distances of reader See Chapter Field data of RF300 transponders (Page 41) Minimum distance between two RF380R readers ≥ 500 mm RF300 tags ISO tags Maximum data transmission range reader - transponder (tag) Read write Approx. 8000 byte/s Approx. 8000 byte/s Approx. 600 byte/s Approx. 400 byte/s Functions Initialize/read/write transponder Scan status and diagnostics information Switch antenna on/off Repeat command Scan transponder serial numbers Power supply 24 V DC Display elements 2-color LED (operating voltage, presence, error) Plug connector M12 (8-pin) Enclosure Dimensions (in mm) Color Material 160 x 80 x 40 (without M12 plug connector) Anthracite Plastic PA 12 Fixing 4 x M5 screws Ambient temperature  During operation  Transport and storage  -25 °C to +70 °C  -40 °C to +85 °C Degree of protection to EN 60529 IP67 Shock to EN 60 721-3-7 Class 7 M2 Vibration to EN 60 721-3-7 Class 7 M2 50 g 20 g Weight Approx. 600 g MTBF (Mean Time Between Failures) in years 109 years Approvals Radio to R&TTE guidelines EN 300 330, EN 301 489, CE, FCC, UL/CSA Current consumption Typ. 160 mA
Readers 5.6 SIMATIC RF380R SIMATIC RF300 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 129 5.6.9 FCC information Siemens SIMATIC RF380R (MLFB 6GT2801-3AA10) FCC ID: NXW-RF380R Siemens SIMATIC RF380R (MLFB 6GT2801-3AB10) FCC ID: NXW-RF380R01 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 5.6.10 Use of the reader in hazardous areas The TÜV SÜD Automotive GmbH as approved test center as well as the TÜV SÜD Product Service GmbH as certification center, identification number 0123, as per Article 9 of the Directive of the European Council of 23 March 1994 (94/9/EC), has confirmed the compliance with the essential health and safety requirements relating to the design and construction of equipment and protective systems intended for use in hazardous areas as per Annex II of the Directive. The essential health and safety requirements are satisfied in accordance with the following standards: Document Title EN 60079-0: 2006 Electrical equipment for hazardous gas atmospheres - Part 0: General requirements EN 60079-15: 2005 Electrical equipment for hazardous gas atmospheres - Part 15: Design, testing and identification of electrical equipment with type of protection "n" DIN VDE 0848-5: 2001 (in parts) Safety in electrical, magnetic and electromagnetic fields - Part 5: Explosion protection ZLS SK 107.1 Central office of the states for safety; test components Identification The identification of the electrical equipment as an enclosed unit is: II 3G Ex nC IIB T5 -25 °C to +70 °C Um = 30 V DC The equipment is assigned the following references: XXXYYYZZZ [= serial number, is assigned during production] TPS 09 ATEX 1 459 X [= certificate number]
Readers 5.6 SIMATIC RF380R SIMATIC RF300 130 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 "No use of the equipment in the vicinity of processes generating high charges" "Do not disconnect plug on load" 5.6.11 Use of the reader in hazardous areas for gases Temperature class delineation for gases The temperature class of the reader for hazardous areas depends on the ambient temperature range: Ambient temperature range Temperature class -25 °C to +70 °C T5 WARNING Ignitions of gas-air mixtures When using the RF380R reader, check to ensure that the temperature class is observed in respect of the requirements of the area of application Non-compliance with the permitted temperature ranges while using the reader can lead to ignitions of gas-air mixtures. 5.6.12 Installation and operating conditions for the hazardous area a) The connector on the RF380R must be grounded via its supply line. b) Use of the equipment in the vicinity of processes generating high charges is not allowed. c) The plug of the RF380R must not be disconnected in a hazardous atmosphere or under load. d) The supply line for the RF380R is not part of this certificate. The supply line must exhibit a sufficient temperature resistance. e) The equipment must be mechanically protected when installed.
Readers 5.6 SIMATIC RF380R SIMATIC RF300 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 131 5.6.13 Dimension drawing  6,0$7,&5)5 Figure 5-25 Dimension drawing RF380R Dimensions in mm
SIMATIC RF300 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 133 RF300 transponder 66.1 Overview of RF300 tags Characteristics of the RF300 tags The RF300 tags (RF3xxT) stand out particularly for their extremely fast data exchange with the RF300 readers (RF3xxR). With the exception of the RF320T transponder, all of the RF300 tags have 8 to 64 KB of FRAM memory, which has an almost unlimited capacity for read/write actions. RF300 tags The following RF300 tags can be used at any time with RF300: ● RF320T ● RF340T ● RF350T ● RF360T ● RF370T ● RF380T
RF300 transponder 6.2 Memory configuration of the RF300 tags SIMATIC RF300 134 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 6.2 Memory configuration of the RF300 tags 5)75)75)75)75)75)7E\WHV8,'UHDGRQO\E\WHV8VHUDUHDUHDGZULWH)5$08VHUDUHDUHDGZULWH((3520273QRWZLWK,46HQVH0D[bEORFNVRIE\WHVHDFK5)7.%5)7.%5)7.%5)7.%5)7.%5)7.%))))))))))))))&)()&))&))))&)))) 1) Physically identical memory When the OTP area is used, the corresponding user area (FF00-FF13) can no longer be modified (read only). Figure 6-1 Memory configuration of the RF300 tags
RF300 transponder 6.2 Memory configuration of the RF300 tags SIMATIC RF300 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 135 EEPROM area The memory configuration of an RF300 tag always comprises an EEPROM memory that has 20 bytes for user data (read/write) and a 4 byte unique serial number (UID, read only). For reasons of standardization, the UID is transferred as an 8 byte value through a read command to address FFF0 with a length of 8. The unused 4 high bytes are filled with zeros. Note The EEPROM user memory (address FF00-FF13, or FF80-FF90) requires significantly more time for writing (approx. 11 ms/byte) than the high-speed FRAM memory. For time-critical applications with a write function, it is therefore recommended that FRAM tags are used (e.g. RF340T, RF350T, RF360T, RF370T, RF380T). FRAM area Depending on the tag type, high-speed FRAM memory is available. (8 KB, 32 KB, 64 KB). This area does not exist for the RF320T. In the case of RF3xxT tags with FRAM memory, the data carrier initialization command (INIT) is only effective on this memory area but not on the EEPROM area (FF00-FF13). OTP area The EEPROM memory area (address FF00-FF13) can also be used as a so-called "OTP" memory (One Time Programmable). The 5 block addresses FF80, FF84, FF88, FF8C and FF90 are used for this purpose. A write command to this block address with a valid length (4, 8, 12, 16, 20 depending on the block address) protects the written data from subsequent overwriting. Note The OTP area cannot be used for the IQ-Sense reader variant. Note Seamless use of the OTP area When the OTP area is used, it must be ensured that the blocks are used starting from Block 0 consecutively. Examples: 3 blocks (with write command), Block 0, 1, 2 (FF80, length = 12): valid 2 blocks (consecutive), Block 0 (FF80, length =4), Block 1 (FF84, length = 4): valid 2 blocks (consecutive), Block 0 (FF80, length =4), Block 2 (FF88, length = 4): Invalid 1 Block, Block 4 (FF90, length = 4): Invalid
RF300 transponder 6.3 SIMATIC RF320T SIMATIC RF300 136 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 NOTICE Use of the OTP area is not reversible. If you use the OPT area, you cannot undo it, because the OPT area can only be written to once. 6.3 SIMATIC RF320T 6.3.1 Features RF320T Characteristics Field of application Identification tasks on small assembly lines in harsh industrial environments Memory Read-only area (4 bytes UID) User data area (20 bytes) Read/write range See Section Field data of RF300 transponders (Page 41) Mounting on metal Not possible: Recommended distance from metal ≥ 20 mm 6.3.2 Ordering data Table 6- 1 Ordering data RF320T RF320T Order number  Button  Memory size: 20 byte EEPROM  IP67  Operating temperature: -25 °C to +85 °C  Dimensions: Ø = 27 mm x 4 mm 6GT2800-1CA00 6.3.3 Mounting on metal Mounting of RF320T on metal Direct mounting of the RF320T on metal is not allowed.
RF300 transponder 6.3 SIMATIC RF320T SIMATIC RF300 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 137 The following figures show the minimum distance between the RF320T and metal: 1RQPHWDO0HWDO'DWDPHPRU\K h > 20 mm Figure 6-2 Mounting of an RF320T on metal with spacer Flush-mounting of RF320T in metal D'DWDPHPRU\ 0HWDO1RQPHWDOK h > 20 mm a > 20 mm Figure 6-3 Flush-mounting of RF320T in metal with spacer At lower values, the field data change significantly, resulting in a reduced range.
RF300 transponder 6.3 SIMATIC RF320T SIMATIC RF300 138 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 6.3.4 Technical data Table 6- 2 Technical data for RF320T Memory size 20 bytes EEPROM (r/w), 4 bytes UID (ro) Memory organization Byte-oriented access, write protection possible in 4-byte blocks MTBF (Mean Time Between Failures) in years 1800 Read cycles Unlimited Write cycles, min. 50 000 at ≤ 40 °C, typical > 100 000 Data retention time > 10 years (at < +40 °C) Read/write distance Dependent on the reader used [see Chapter Field data of RF300 transponders (Page 41) ] Energy source Inductive power transmission Shock/vibration-resistant to EN 60721-3-7, Class 7 M3 100 g/20 g Torsion and bending load Not permissible Fixing Adhesive/M3 screws Recommended spacing from metal > 20 mm Degree of protection to EN 60529  IP67/IPX9K Housing  Dimensions  Color/material Button  Ø 27 mm x 4 mm  Black/epoxy resin Ambient temperature  Operation  Transport and storage  -25 to +85 °C  -40 to +125 °C Weight Approx. 5 g Note All the technical data listed are typical data and are applicable for an ambient temperature between 0 and +50 °C and a metal-free environment.
RF300 transponder 6.4 SIMATIC RF340T SIMATIC RF300 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 139 6.3.5 Dimension drawing  Figure 6-4 RF320T dimension drawing Dimensions in mm 6.4 SIMATIC RF340T 6.4.1 Features RF340T Characteristics Field of application Identification tasks on small assembly lines in harsh industrial environments Memory Read-only area (4 bytes UID) Read/write memory (8 KB) OTP 1) memory (20 bytes) Read/write range See Section Field data of RF300 transponders (Page 41) Mounting on metal Direct mounting on metal is possible. 1) OTP: (One Time Programmable) 6.4.2 Ordering data Table 6- 3 Ordering data RF340T RF340T Order number  IP68  Memory size: 8 KB FRAM  Operating temperature: -25 °C to +85 °C  Dimensions: 48 x 25 x 15 (L x W x H, in mm) 6GT2800-4BB00
RF300 transponder 6.4 SIMATIC RF340T SIMATIC RF300 140 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 6.4.3 Mounting on metal Direct mounting of the RF340T on metal is permitted. Mounting of RF340T on metal 0HWDO Figure 6-5 Mounting of RF340T on metal Flush-mounting of RF340T in metal: DD0HWDO Figure 6-6 Flush-mounting of RF340T in metal The standard value for a is ≥ 20 mm. At lower values, the field data change significantly, resulting in a reduction in the range.
RF300 transponder 6.4 SIMATIC RF340T SIMATIC RF300 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 141 6.4.4 Technical specifications Table 6- 4 Technical specifications for RF340T Memory size 8 KB Memory organization Blocks of 8 bits/byte-by-byte Memory configuration  Serial number (UID)  Application memory  OPT memory  4 bytes (fixed code)  8189 bytes r/w  20-byte OTP 1) memory Storage technology FRAM / EEPROM MTBF (Mean Time Between Failures) in years 1200 Write cycles, at +40 °C Virtually unlimited (>1010) Read cycles Virtually unlimited (>1010) Data transmission time  Read  Write With RS422 reader: Approx. 0.13 ms/byte approx. 0.13 ms/byte With IQ-Sense reader: Approx. 20 ms/byte approx. 25 ms/byte Data retention > 10 years Read/write distance Dependent on the reader used [see Chapter Field data of RF300 transponders (Page 41)] Multitag capability max. 4 transponders Recommended spacing from metal can be directly mounted on metal Power supply Inductive, without battery Degree of protection to EN 60529 Shock to EN 60721-3-7 Vibration to EN 60721-3-7 Torsion and bending load IP68/IPX9K 50 g 20 g Not permitted permanently Enclosure dimensions Color Material Fixing 48 x 25 x 15 mm (L x W x H) Anthracite PA12 2 screws (M3) Ambient temperature  Operation  Storage and transport -25°C to +85°C -40°C to +85°C Weight Approx. 25 g 1) OTP: One Time Programmable
RF300 transponder 6.5 SIMATIC RF350T SIMATIC RF300 142 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 6.4.5 Dimension drawing 6,(0(166,0$7,&5)7 Figure 6-7 RF340T dimension drawing Dimensions in mm 6.5 SIMATIC RF350T 6.5.1 Features RF350T Characteristics Field of application Identification tasks on small assembly lines in harsh industrial environments Memory Read-only area (4 bytes UID) Read/write memory (32 KB) OTP 1) memory (20 bytes) Read/write range See Section Field data of RF300 transponders (Page 41) Mounting on metal Direct mounting on metal is possible. 1) OTP: One Time Programmable
RF300 transponder 6.5 SIMATIC RF350T SIMATIC RF300 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 143 6.5.2 Ordering data Table 6- 5 Ordering data RF350T RF350T Order number  IP68  Memory size: 32 KB FRAM (read/write) and 4 byte EEPROM (read only)  Operating temperature: -25 °C … +85 °C  Dimensions: 50 x 50 x 20 (L x W x H, in mm) 6GT2800-5BD00 6.5.3 Mounting on metal Direct mounting of the RF350T on metal is permitted. Mounting of RF350T on metal Figure 6-8 Mounting of RF350T on metal
RF300 transponder 6.5 SIMATIC RF350T SIMATIC RF300 144 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 Flush-mounting of RF350T in metal: Figure 6-9 RF350T flush-mounted in metal The standard value for a is ≥ 20 mm. At lower values, the field data change significantly, resulting in a reduction in the range. 6.5.4 Technical data Table 6- 6 Technical specifications for RF350T Memory size 32 KB Memory organization Blocks of 8 bits/byte-by-byte Memory configuration  Serial number (UID)  Application memory  OTP 1) memory  4 bytes (fixed code)  32765 bytes r/w  20 bytes Storage technology FRAM / EEPROM MTBF (Mean Time Between Failures) in years 1200 Write cycles, at +40 °C Virtually unlimited (>1010) Read cycles Virtually unlimited (>1010) Data transmission time  Read  Write With RS422 reader: Approx. 0.13 ms/byte approx. 0.13 ms/byte With IQ-Sense reader: Approx. 20 ms/byte approx. 25 ms/byte Data retention > 10 years
RF300 transponder 6.5 SIMATIC RF350T SIMATIC RF300 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 145 Read/write distance Dependent on the reader used [see Chapter Field data of RF300 transponders (Page 41)] Multitag capability max. 4 transponders Recommended spacing from metal can be directly mounted on metal Power supply Inductive, without battery Degree of protection to EN 60529 Shock to EN 60721-3-7 Vibration to EN 60721-3-7 Torsion and bending load IP68 50 g 20 g Not permitted permanently Enclosure dimensions Color Material Fixing 50 x 50 x 20 mm (L x W x H) Anthracite PA12 2 screws M4 Ambient temperature  Operation  Transport and storage -25 °C to +85 °C -40 °C to +85 °C Weight Approx. 25 g 1) OTP: One Time Programmable
RF300 transponder 6.5 SIMATIC RF350T SIMATIC RF300 146 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 6.5.5 Dimension drawing 7KHWUDQVSRQGHUFDQEHPRXQWHGDVVKRZQZLWKWKHIL[LQJIUDPH,QVWDOODWLRQGLDJUDP)L[LQJIUDPH7UDQVSRQGHU Figure 6-10 RF350T dimension drawing Dimensions in mm
RF300 transponder 6.6 SIMATIC RF360T SIMATIC RF300 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 147 6.6 SIMATIC RF360T 6.6.1 Features RF360T Characteristics Field of application Identification tasks on small assembly lines in harsh industrial environments Memory Read-only area (4 bytes UID) Read/write memory (8 KB) OTP 1) memory (20 bytes) Read/write range Refer to SectionField data of RF300 transponders (Page 41) Mounting on metal Not possible; recommended distance from metal ≥ 20 mm 1) OTP. One Time Programmable 6.6.2 Ordering data Table 6- 7 Ordering data RF360T RF360T Order number  IP67  Memory size: 8 KB FRAM (read/write) and 4 byte EEPROM (read only)  Operating temperature: -25 °C … +75 °C  Dimensions: 85.8 x 54.8 x 2.5 (L x W x H, in mm) 6GT2800-4AC00 Table 6- 8 Ordering data for RF360T accessories RF360T accessories Order number Spacers 6GT2190-0AA00 Fixing pocket 6GT2190-0AB00 6.6.3 Mounting on metal Direct mounting of the RF360T on metal is not allowed. A distance ≥ 20 mm is recommended. This can be achieved using the spacer 6GT2190-0AA00 in combination with the fixing pocket 6GT2190-0AB00.
RF300 transponder 6.6 SIMATIC RF360T SIMATIC RF300 148 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 Mounting of RF360T on metal K0HWDO1RQPHWDO'DWDVWRUDJHXQLW Figure 6-11 Mounting of RF360T with spacer The standard value for h is ≥ 20 mm. Flush-mounting of RF360T in metal: 1RQPHWDO0HWDODD'DWDVWRUDJHXQLWK Figure 6-12 Flush-mounting of RF360T with spacer The standard value for a is ≥ 20 mm. At lower values, the field data change significantly, resulting in a reduction in the range.
RF300 transponder 6.6 SIMATIC RF360T SIMATIC RF300 System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04 149 Dimensions of spacer and fixing pocket for RF360T 6,(0(16/XJV+ROGLQJNQREV)L[LQJSRFNHW*7$%)L[LQJEUDFNHW'LPHQVLRQVNHWFK6SDFHUV*7$$0DWHULDO3$'DWDPHPRU\7KHWUDQVSRQGHULVLQVHUWHGLQWRWKHIL[LQJSRFNHW7KHHDUVDUHPRYHGE\rDQGLQVHUWHGLQWRWKHVSDFHU7KHIL[LQJSRFNHWPXVWEHDOLJQHGVXFKWKDWLWFRYHUVWKHWUDQVSRQGHUVHH)LJXUH/RFNLQJLVDXWRPDWLF5HDVVHPEO\LQVWUXFWLRQV7KHIL[LQJSRFNHWLVDWWDFKHGWRDQRQPHWDOEDVHE\WKHHDUV7KLVFDQEHDFKLHYHGZLWK6FUHZVLQWKHKROHVSURYLGHG5LYHWVLQWKHKROHVSURYLGHG1DLOVWKURXJKWKHKROHV7DFNVWKURXJKWKHSODVWLFRIWKHHDUV3XVKLQJLQWRWKHVSDFHUV7KHHDUVFDQEHPRYHGWKURXJKXSWRr7KHWUDQVSRQGHULVLQVHUWHGLQWRWKHIL[LQJSRFNHW/RFNLQJLVFDUULHGRXWXVLQJWKHKROGLQJNQREVLQWKHIL[LQJSRFNHW6SDFHUV)L[LQJSRFNHW7UDQVSRQGHUZLWKIL[LQJSRFNHW 7UDQVSRQGHUZLWKIL[LQJSRFNHWDQGVSDFHUFRQQHFWHGWRJHWKHU7KHVSDFHUFDQEHGLUHFWO\PRXQWHGRQPHWDO,QFRPELQDWLRQZLWKWKHIL[LQJSRFNHWDQRQPHWDOGLVWDQFHRIPPUHVXOWVEHWZHHQWKHWUDQVSRQGHUDQGPHWDO0RXQWLQJ:LWKRUVFUHZV0:LWKUXEEHUVRQWKHKROGLQJFOLSVHJRQPHVKER[HV:LWKFDEOHWLHVRQWKHKROGLQJFOLSVHJRQPHVKER[HV Figure 6-13 Dimensions of spacer and fixing pocket for RF360T

Navigation menu