Siemens MOBYF-XXX80 Tag Reader w/Serial Port User Manual Manual Basic Requirements

Siemens AG Tag Reader w/Serial Port Manual Basic Requirements

Manual Basic Requirements

3-2 MOBY F Configuration, Installation and Service Manual(4) J31069-D0113-U001-A0-76183.1 Basic Requirements!WarningDo not make changes on the devices.Violation will invalidate interference emission certification (BZT, FCC), CE,and the manufacturer’s warranty.NoteThis equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmful interference ina residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one ormore of the following measures:SReorient or relocate the receiving antenna.SIncrease the separation between the equipment and receiver.SConnect the equipment into an outlet on a circuit different from that towhich the receiver is connected.SConsult the dealer or an experienced radio/TV technician for help.To choose the correct MOBY F components, apply the following criteria toyour particular application:STransmission distance (i.e., read/write distance)SThe amount of data to be transferredSMetal-free spaces for MDS and SLG (antenna)SStatic of dynamic transmission of the dataSSpeed for dynamic transmissionSTolerances of the trackingSEnvironmental conditions (e.g., moisture, temperature, chemical effects,and so on)SMaximum write frequency per MDSConfiguration and Mounting Guidelines

Navigation menu