Shure orporated UR3E Wireless Microphone Transmitter User Manual Exhibit D Users Manual per 2 1033 c3

Shure Incorporated Wireless Microphone Transmitter Exhibit D Users Manual per 2 1033 c3

Exhibit D Users Manual per 2 1033 c3

©2011 Shure Incorporated 27A16156 (Rev. 1) Printed in U.S.A.UR3 Plug-on Transmitter
3General DescriptionThe UR3 is compatible with any wired XLR microphone and is an essential component for professional field and media production applications. It is comfortable to hold, features a back-lit display, and the audio level and power indicator LEDs are discreetly hidden.UR3 Plug-on TransmitterFeatures① Joystick Enter, exit and scroll using the joystick② XLRConnection Connects to any XLR wired microphone or device output③ PowerLED Tri-color LED, green, amber and red④ AudioLED Tri-color LED for audio settings, red is peak⑤ IRWindow For transmitting settings from receiver to transmitter⑥ BatteryCompartmentandBatteryCapRetainer Requires 2 AA batteries. Turn cover counterclockwise to open⑦ PowerSwitch Press on, press and hold to turn off• UHF-R Audio Reference Companding• Wide-band tuning (region specific)• Smart, ergonomic industrial design• Selectable +12V/+48V phantom power• Sweepable high-pass filter• Programmable preset list with copy/paste to other UR3s• Selectable mic/line input• 10/50 mW RF power• Discreetly located audio and battery life indicators• IR sync②③④ ⑤ ⑥⑦①
4Setup1. Install batteries and turn power on. 2. Select the appropriate level, mic or line, to match the audio signal source: AUDIO > SENS/GAIN > SENS3. Plug into an XLR microphone or the output of an audio device. 4. Perform a sound check: Adjust the gain until the audio LED peaks red and flickers amber: AUDIO > SENS/GAIN > GAINJoystickControlsUse the joystick for navigating and set-ting values.PushRight(Enter)Access a menu or apply the selected valuePushLeft(Exit)Exit without saving changesPushUp/Down(Scroll)Scroll through menus or change a valueEnter: Access a menu or save the selected valueScroll Up/Down: Scroll through menus or change a valueSHURE606.125MHzMICExit: Return to previous screen Joystick
5sens/gainphantomradioutilitiesHPF sens/gainmic PRESETSaVEDexit enter sync scanexit enter sync scanAudio ABJ 779-810 MHz NavigateRFOL OLAudio ABJ 779-810 MHz NavigateRF®UR4D+Wireless Receiverwith Audio ReferenceCompandingsyncControl Monitor PowersyncMonitor ClipENTEREXITpush12Audio ABJRFOL®Wireless Receiverwith Audio ReferenceCompanding syncradioaudioUTILITIESradioaudioUTILITIESABJ 779-810 MHz NavigateOLAudio ABJ 779-810 MHz NavigateRFUR4D+Wireless Receiverwith Audio ReferenceCompandingsyncControl Monitor PowersyncMonitor ClipENTEREXITpush12Audio ABJRFOL®AudioRFOLSyncingwithaUHF-RReceiverAlign IR windows with a UHF-R receiver and press sync on the receiver. The transmitter displays SYNC SUCCESS.radioaudioUTILITIESradioaudioUTILITIES
6AudioSettingsAUDIOMenuSENS/GAIN>SENSAdjusts input level to match audio signal source. MIC: For microphones or mic-level outputsLINE: For line-level outputs.SENS/GAIN>GAINAdjustsaudiooutputtothereceiverincrementallyfrom−10dbto+20db.PHANTOMAdds phantom power for condenser microphones. Select 12V or 48V as required for the microphone.HPF(ROLLOFF)High-pass filter. Scroll up to turn on the filter and set the low-frequency rolloff in Hz. (Scroll all the way down to turn off.)RFSettingsUse the RADIO menu to adjust the following RF settings: RADIOMenuSETFREQAdjusts group, channel or frequency.RFPWRLVLSelects 10 mW or 50 mW power levelDISABLERFDisables RF transmission. RF OFF appears on home screen.ENABLERF(ifdisabled)Enables RF transmission
7LockingandUnlockingtheTransmitterTo lock the transmitter, select UTILITIES > LOCK. To unlock the transmitter: 1. From the home screen, hold the joystick to the right for 5 seconds or until UN-LOCK? appears. 2. Push right again. An on-screen key appears showing the joystick sequence to unlock the transmit-ter. 3. Follow the pattern to unlock the transmitter (up, down, left, right).UtilityMenuUTILITIESMenuLOCKLocks the transmitter to prevent changes to settings. MICPRESETAcesses the preset list. DISPLAYChanges the home screen display format. BATTERYSets battery type for more accurate battery life metering. CONTRASTAdjusts display contrast (press up/down). RESTORERestores the factory default settings. SHURE606.125MHzMIC
8PresetSubmenuUse the preset submenu to add, modify, or delete presets, or to clear the preset list. The submenu is not available until the first preset has been entered. Note: The UR3 is shipped with an empty preset list.1. Access the preset list: UTILITIES > MIC PRESET2. Scroll down to select a preset. 3. Push right to access the menu for the selected preset. SELECTActivates the selected preset. MODIFYModify the selected preset. ADDAdd a new preset after the selected preset. DELETEDeletes the selected preset. DELETEALLDeletes all presets.COPY/PASTECopy and paste the entire preset list to another UR3. MicrophonePresetThe transmitter holds up to 10 microphone presets. To change or modify the presets, you must enter the microphone preset submenu: UTILITIES > MIC PRESET. From the sub-menu you can select, modify, add or delete and copy/paste settings. AccessingPresetsAddingapreset:UTILITIES > MIC PRESET>ADDUse EXIT and ENTER to scroll between parameters. Use UP/DOWN to change parameter values. Note: ENTER through all parameter to save values.
9CopyandPastePresetList1. On the destination UR3: select UTILITIES > MIC PRESETHighlight MIC PRESET.2. From the source UR3: select UTILITIES > MIC PRESET > COPY/PASTE. 3. Align the IR windows and press enter on the source UR3. SUCCESS appears on the LCD of the destination UR3. ModifyMicrophonePresetsChoose a preset from the preset list, enter the submenu, and choose MODIFY. Usethejoysticktoeditvalues: Right: move to the next value. Down: edit the selected value.Left: exit the preset without saving changes.To exit and save: Continue to scroll right, through all fields, until PRESET SAVED appears. To edit the eight-character name: 1. Highlight the preset name and press the joystick down. 2. Scroll up/down to change the character. 3. Scroll right to move to the next character. 4. To exit, continue to scroll right past the last character.PoweronwithRFOFF(RFSafetyMode)Use this to turn on the transmitter without transmitting RF. This allows you to change frequency settings on the transmitter without accidentally interfering with a frequency being used by another transmitter.1) Hold joystick to the left (exit) while turning on the transmitter power. RF OFF is displayed on home screen.2) Change and save your frequency settings as you normally would – the transmit-ter will not broadcast.3) To transmit RF, power the transmitter off or turn the RF on thru the Main Menu, MAIN MENU>RADIO> ENABLE RF.4) Change and save your frequency settings as you normally would – the transmit-ter will not broadcast.LockUse this shortcut to power on the transmitter with the interface locked. This pre-vents accidental changes to transmitter settings. 1. While holding the joystick to the right, power on the transmitter. The home screen displays the lock icon. 2. To unlock the transmitter, hold the joystick to the right for 5 seconds and follow the on-screen instructions.
10FrequencyBand FrequencyRange(MHz) RFPower(mW)*G1, G1E 470 - 530 10 / 50H4, H4E 518 - 578 10 / 50H4HK 518 - 565 10J5 578-608, 614-638 10 / 50J5E 578-638 10 / 50J5HK 578 - 638 10K4E 606 - 666 10 / 50L3, L3E 638 - 698 10 / 50M5E 694 - 758 10 / 50P8 710 - 790 10 / 50P9 710 - 787 10 / 50Q5 740 - 814 10 / 50R9 790 - 865 10 / 50 (10 mW only from 863-865)MA24 779-788, 797-806 10MJBX 806 - 810 10R16 794 - 806 10 / 50R18 794 - 806 10X2 925 - 932 10X1 944 - 952 10 / 50* conductive into 50 ohmsModulation FM (45kHz max. deviation)FrequencyRange 470 – 952 MHz (varies by region)WorkingRange Under typical conditions - 150 m (500 ft.) Line-of-sight, outdoors for a single system - 500 m, (1600 ft.) Note: Actual range depends on RF signal absorption,antenna efficiency, reflections, and interference.TuningBandwidth Up to 80 MHz (varies by region)Antenna Dipole - Antenna is formed from the UR3 and attached microphoneCarrierFrequen-cies Up to 3200, tunable in steps of 25 kHz (varies by region)RFPowerOutput Selectable 10 mW or 50 mW max. (depending on region) PowerRequire-ments(2) 1.5V AA alkalineBatteryLife 10 hours (alkaline) without phantom power @ 10mW, typical (freq. band dependent)3-4 hours (alkaline), with 48V phantom power @ 50mW, typical (freq. band dependent)Specifications
11GainAdjustmentRange -10 to +20 dB, MIC or LINE input settingPilot Tone 32 kHzFrequencystability ± 0.0015%SpuriousRadiation 75 dB below carrier (typical)Equivalentinputnoise-127.0dBV, A-weighted (audio front end)Max.AudioInputlevel+24 dBV (Line Input, 0dB gain)-21 dBV (Mic Input, 0dB gain)DifferentialInputimpedance6kΩLINEInputSetting3kΩMICInputSettingSystemFrequencyresponse35Hz – 17kHz, (+1.5dB, -3dB)Note: Overall system frequency response depends on the microphone element and receiver.HighPassFilter Two-pole (12dB per octave), selectable cut off frequency from 40 Hz to 240HzSystemTHD+N <0.3%, 1kHz sine wave @ 6dB below clip (line and mic input setting)SystemDynamicRange107 dB typical, Line Mode, A-weighted through a UR4105 dB typical, Mic Mode, A-weighted through a UR4102 dB typical, Line Mode, A-weighted through a UR5100 dB typical, Mic Mode, A-weighted through a UR5Audioinputjack 3-pin female XLR, Pin 1: Ground. Pin 2: Hot, Pin 3: ColdPhantomPower +48V ± 4V, 7mA max.+12V ± 1V, 7mA max.Weight 196g (6.9 oz.) (with AA batteries)Dimensions 99 x 66 x 23 mm 3.9 x 2.6 x 0.9 in.H x W x D
12LICENSING INFORMATION:Licensing: A ministerial license to operate this equipment may be required in certain areas. Consult your national authority for possible requirements.Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate the equipment. Licensing of Shure wireless microphone equipment is the user’s responsibility, and licensability depends on the user’s classification and applica-tion, and on the selected frequency. Shure strongly urges the user to contact the appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies.Certifications: UR3: Type Accepted under FCC Parts 74 (FCC ID: DD4UR3A, DD4UR3B, DD4UR3C, DD4UR3E, DD4UR3P). Certified by IC in Canada under RSS-123 and RSS-102 (IC: 616A-UR3A, 616A-UR3B, 616A-UR3C, 616A-UR3E).Meets essential requirements of the following European Directives:R&TTE Directive 99/5/EC•WEEEDirective2002/96/EC,asammendedby2008/34/ECPlease follow your regional recycling scheme for electronic wasteRoHS Directive 2002/95/EC, as ammended by 2008/35/EC Conforms to European Regulation (EC) No. 1275/2008, as amended.Meets requirements of the following standards: EN 300 422 Parts 1 and 2, EN 301 489 Parts 1 and 9, EN60065.The CE Declaration of Conformity can be obtained from: www.shure.com/europe/complianceThis device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference,and (2) this device must accept any interference, including interfer-ence that may causeundesired operation of the device.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux ap-pareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en comprom - ettre le fonctionnement.
AUDIOHPFSENS/GAINPHANTOMUTILITIES LOCKLISTADDDELETEALLCOPY/PASTEMICPRESETDISPLAYBATTERYCONTRASTSETFREQDISABLERFRFPWRLVLRADIOradioaudioUTILITIESradioaudioUTILITIESRESTORE
SHURE Incorporated http://www.shure.comUnited States, Canada, Latin America, Caribbean:5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.Phone: 847-600-2000 U.S. Fax: 847-600-1212 Int’l Fax: 847-600-6446Europe, Middle East, Africa:Shure Europe GmbH, Phone: 49-7262-9249-0 Fax: 49-7262-924911-4Asia, Pacific:Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055

Navigation menu