Shure orporated PGX2A Handheld Wireless Microphone User Manual 27a8878

Shure Incorporated Handheld Wireless Microphone 27a8878

Contents

user manual

Shure PGX Wireless User GuidePGX WirelessUser Guide
ENGLISH1Shure PGX WirelessThe New Breed of Shure Wireless SystemsCreated for active musicians and presenters who also manage their own sound, Shure PGX Wireless improves your performance and simplifies your setup.Innovations such as automatic frequency selection and automatic transmitter setup make wireless quicker and completely worry free. PGX systems now feature Shure’s patented Audio Reference Companding, delivering the crystal clear sound quality that pro audio engineers trust.PGX gives you 9 systems to choose from and tour-tested wireless forguitars, instruments, and vocal mics — including the legendary SM58® vocal microphones. It’s the best-sounding, simplest choice in wireless, from the leader in live performance sound.Table of ContentsSystem Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2PGX4 Receiver Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3PGX2 Handheld Transmitter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Changing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Adjusting Gain. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4PGX1 Bodypack Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Wearing the Bodypack Transmitter. . . . . . . . . . . . . . . . . . . . . . . . . . .5Changing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Adjusting Gain. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Single System Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Multiple System Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Manual Frequency Selection (receiver only). . . . . . . . . . . . . . . . . . . .7Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Locking and Unlocking Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10Patent numbers 6,597,301, 5,794,125, and 5,692,057.
SHURE PGX WIRELESS2System ComponentsAll systems include• PGX4 receiver• 2 AA batteries• Power supply• User guideVocalist systems include• Microphone Head (choice of PG58, SM58®, SM86, or Beta 58A®)• PGX2 handheld transmitter• Microphone clipLavalier, Headworn, and Instrument systems include• PGX1 bodypack transmitter• Microphone (choice of WL93, WL185, PG30 or Beta 98H/C™)Guitar systems include• PGX1 bodypack transmitter• 1/4” to mini 4-pin guitar cable
ENGLISH3PGX4 Receiver FeaturesFront Panelᕡaudio LEDIndicates strength of incoming audio signal: green for normal, amber for strong, red for peak.ᕢLED screenSee “Single System Setup” on page 6.ᕣchannel buttonSee “Single System Setup” on page 6.ᕤready LEDGreen light indicates system is ready for use.ᕥInfrared (IR) portBroadcasts IR signal to transmitter.ᕦsync buttonPress to synchronize transmitter and receiver frequencies. Back PanelᕡAC adapter jackᕢAdapter cord tie-offᕣXLR balanced microphone out-put jackᕤ1/4” unbalanced output jackᕡ ᕢ ᕣ ᕤ ᕥ ᕦᕡ ᕣ ᕤᕢ
SHURE PGX WIRELESS4PGX2 Handheld TransmitterᕡPower / Infrared (IR) / Mute indicatorᕢOn-off / mute switchPress and hold to turn on or off. Press and release to mute or unmute.ᕣIR portReceives infrared beam to synchronize frequencies. When using multiple systems, only one transmitter IR port should be exposed at a time. Changing Batteries• Expected life for alkaline batteries is approximately8hours.• When the transmitter light glows red, the batteries shouldbe replaced immediately, as shown on the right.Adjusting Gain• Access the gain adjustment switch by unscrewing thehead of the microphone.• Two gain settings ቢ are available on the PGX2. Usethe tip of a pen or a small screwdriver to move theswitch.•0dB: For quiet to normal vocal performance.•–10dB: Use only if audio is distorted due tohigh vocal levels.Green ReadyFlashing green Controls locked (see page 8)Amber Mute onFlashing red IR transmission in processGlowing red Battery power lowPulsing red onstartup Batteries dead (transmitter cannot be turned on until batteries are changed)Pulsing red aftersynchronization Transmitter and receiver incompatible; contact your Shure resellerPGXᕣᕢᕡPGXBIASAUDIO0dB -10dBቢ
ENGLISH5PGX1 Bodypack TransmitterᕡPower / Infrared (IR) / Mute indicatorᕢOn-off / mute switchPress and hold to turn on or off. Press and release to mute or unmute.ᕣ4-Pin Microphone Input JackᕤIR portReceives infrared beam to synchronize frequencies. When using multiple systems, only one transmitter IR port should be exposed at a time.ᕥGain adjustment switch (see below)Wearing the Bodypack Transmitter• Clip the transmitter to a belt ቢ or slide a guitar strapthrough the transmitter clip ባ as shown. If using abelt, slide the transmitter until the belt is pressedagainst the base of the clip.Changing Batteries• Expected life for alkaline batteries is approx-imately 8 hours.• When the transmitter light glows red, the bat-teries should be replaced immediately, as illustrated.Adjusting Gain• Three gain settings are available on the PGX1:•mic: Microphone•0: Guitar•-10: Use only if audio is distorted due to high input levelGreen ReadyFlashing green Controls locked (see page 8)Amber Mute onFlashing red IR transmission in processGlowing red Battery power low (transmitter cannot be turned off until batteries are changed)Pulsing red onstartup Batteries dead (transmitter cannot be turned on until batteries are changed)Pulsing red aftersynchronization Transmitter and receiver incompatible; contact your Shure resellerPGX1ᕤᕥᕡᕢᕣቢባPGX1
SHURE PGX WIRELESS6Single System SetupIn any wireless setup, each transmitter and receiver pair must be tuned to the same frequency, or channel. The PGX wireless system uses automatic transmitter setup to synchronize the transmitter and receiver channels.Note: transmitting devices such as cellular phones and two-way radios, and digital devices such as CD players and effects processors, may interfere with wireless audio transmissions. Keep your PGX transmitters and receivers away from these and other potential sources of interference.Single System Setup1. Automatic Frequency SelectionPress and release the channel button. This scans for a clear channel and sets the receiver to that channel.2. Automatic Transmitter SetupTurn On the transmitter.Open the transmitter battery compartment to display the infrared (IR) port (see pages 4 and 5).With the transmitter IR port exposed to the receiver, press sync.Hold the sync button until the red light stops flashing on both receiver and transmitter.When the receiver ready light glows, the system is ready for use. Close the transmitter battery compartment.channelLED screen displayscurrent channelpress channel button to scan for a clear channelsystem scans forclearest availablechannelsyncreadyaudio channel select< 15 cm (8 in.)orsync
ENGLISH7Multiple System SetupSee the included frequency and channel guide for information on compatible channels.Multiple system setups require the use of groups and channels. In the LED panel, the left digit indicates the current group; the right digit indi-cates the current channel.Follow these steps when using multiple PGX systems in a single installation:1. Turn all receivers on and all transmitters off.2. Make sure the group number is the same for all receivers. If nec-essary, use Manual Frequency Selection (shown below) to set all receivers to a single group.3. Perform Automatic Frequency Selection on the first receiver (see page 6).4. Turn on the first transmitter.5. Perform Automatic Transmitter Setup (see page 6).Leave the transmitter turned on. Repeat for each system.Be sure that only one transmitter’s IR port is exposed when synchronizing a system.Manual Frequency Selection (receiver only)To manually select a group or a channel, press and hold the channel button. The display alternates between the group number and the channel number.Releasing the channel button while either number is displayed makes the displayed number flash.Pressing the channel button while either number is flashing increases the setting by one.To activate a newly selected group or channel, simply wait until the number stops flashing.left digit is group right digit is channelhold channelbutton...then press the channel button to increase the value.to change the groupvalue, release thechannel button whilethe first digit displays......then press the channel button to increase the value.to change the channelvalue, release thechannel button while thesecond digit displays...
SHURE PGX WIRELESS8TroubleshootingLocking and Unlocking ControlsLocking the system controls prevents accidental muting or channel adjust-ment during performance.TransmitterTo lock the controls: with the transmitter off, hold the power button down until the green LED flashes (± 5 seconds).To unlock the controls: with the transmitter on, hold the power button down until the green LED flashes (± 5 seconds).ReceiverTo lock the channel: hold the channel button until the numbers flash (± 10 seconds).To unlock the channel: hold the channel button until the numbers flash (± 5 seconds).Issue Indicator Status SolutionNo sound or faint sound Transmitter power light on, receiver LEDs on• Perform automatic transmitter setup (see page 6)• Verify all sound system connectionsReceiver LED off• Make sure AC adapter is securely plugged into electrical outletand into DC input connector on rear panel of receiver• Make sure AC electrical outlet works and is supplying propervoltageTransmitter power light glowing or flashing red• Replace transmitter batteries• If indicator continues flashing red after batteries are replaced, thetransmitter and receiver may be from incompatible frequencybands. Contact your Shure reseller for assistance.Transmitter power light off• Turn transmitter on• Make sure the +/– indicators on batteries match the transmitterterminals• Insert fresh batteriesDistortion or unwanted noise bursts• Remove nearby sources of RF interference (CD players,computers, digital effects, in-ear monitor systems, etc.)• Change receiver and transmitter to a different frequency• Reduce transmitter gain• Replace transmitter batteries• If using multiple systems, change the frequency of one of theactive systemsDistortion level increases graduallyTransmitter power light glowing or flashing red• Replace transmitter batteriesSound level different from cabled guitar or microphone, or when using different guitars• Adjust transmitter gain as necessaryCannot turn transmitter on Transmitter light flashing red• Replace transmitter batteries
ENGLISH9SpecificationsSystem Working Range 100m (300 ft.)Note: actual range depends on RF signal absorption, reflection, and interferenceAudio Frequency Response +/– 2 dB Minimum: 45 HzMaximum: 15 kHz(Overall system frequency depends on microphone element.)Total Harmonic Distortion Ref. +/– 33 kHz deviation, 1 kHz tone0.5%, typicalDynamic Range >100 dB A-weightedOperating Temperature Range –18°C (0°F) to +50°C (+122°F) Note: battery characteristics may limit this rangeTransmitter Audio Polarity Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.PGX1Bodypack TransmitterAudio Input Level –10 dBV maximum at "mic" gain position+10 dBV maximum at 0dB gain position+20 dBV maximum at –10dB gain positionGain Adjustment Range 30 dBInput Impedance 1MΩRF Transmitter Output 30 mW maximum (dependent on applicable country regulations)Dimensions 108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)Weight 81 grams (3 oz.) without batteriesHousing Molded polycarbonate casePower Requirements 2 “AA” size alkaline or rechargeable batteriesBattery Life >8 hours (alkaline)PGX1PGX2Handheld TransmitterAudio Input Level +2 dBV maximum at –10dB position–8 dBV maximum at 0dB positionGain Adjustment Range 10dBRF Transmitter Output 30 mW maximum (dependent on applicable country regulations)Dimensions including SM58 cartridge 254 mm x 51 mm dia. (10 x 2 in.)Weight 290 grams (10.2 oz.) without batteriesHousing Molded PC/ABS handle and battery cupPower Requirements 2 “AA” size alkaline or rechargeable batteriesBattery Life >8 hours (alkaline)PGXPGX4ReceiverDimensions 40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.)Weight 327 g (11.5 oz.)Housing ABSAudio Output LevelRef. +/– 33 kHz deviation with 1 kHz toneXLR connector (into 600 Ω load): –19 dBV1/4 inch connector (into 3000 Ω load): –5 dBVOutput Impedance XLR connector: 200 Ω1/4 inch connector: 1kΩXLR output Impedance balancedPin 1: Ground (cable shield)Pin 2: AudioPin 3: No AudioSensitivity –105 dBm for 12 dB SINAD, typicalImage Rejection >70 dB, typicalPower Requirements 12–18 Vdc at 150 mA, supplied by external power supplysyncreadyaudio channel select
SHURE PGX WIRELESS10Replacement PartsAll Systems Microphone Stand Adapter (PGX2) WA371Carrying Case 94B8429System-SpecificAC Adapter (120 VAC, 60 Hz) PS20AC Adapter (220 VAC, 50 Hz, Argentina) PS20ARAC Adapter (230 VAC, 50/60 Hz, Europlug) PS20EAC Adapter (230 VAC, 50/60 Hz, UK) PS20UKAC Adapter (100 VAC, 50/60 Hz) PS20JAC Adapter (220 VAC, 50 Hz, China) PS20CHNPG58 Head with Grille RPW108SM58 Head with Grille (PGX2/SM58) RPW112SM86 Head with Grille (PGX2/SM86) RPW114BETA 58 Head with Grille (PGX2/BETA 58) RPW118Matte Silver Grille (PGX2/SM58) RK143GMatte Silver Grille (PGX2/SM86) RPM226Matte Silver Grille (PGX2/BETA 58) RK265GBelt Clip 44A8030Optional AccessoriesBlack Grille (PGX2/BETA 58) RK323GZipper Bag (PGX1) 26A13Zipper Bag (PGX2) 26A14Universal Rack Tray URT
ENGLISH101Regulatory and Licensing InformationPGX1 & PGX2 Transmitters:Type Accepted under FCC Parts 74 (FCC ID: "DD4SLX1" & "DD4SLX2"). Certified by IC in Canada under RSS-123 and RSS-102 ("IC: 616A-SLX1" and "IC: 616A-SLX2"). Meets the essential requirements of the European R&TTE Directive 99/5/EC (ETSI EN 300-422 Parts 1 & 2, EN 301 489 Parts 1 & 9) and is eligible to carry the CE marking. PGX4 Receiver:Authorized under the Declaration Of Conformity provision of FCC Part 15B. Certified under Industry Canada to RSS-123 ("IC: 616A-PGX4"). Meets the essential requirements of the European R&TTE Directive 99/5/EC (EN 301 489 Parts 1 & 2, EN 300 422 Parts 1 & 2) and is eligible to carry the CE marking. PS 20 Series Power Supplies:Conforms to Safety Standard IEC 60065. PS20E and PS20UK are eligible to bear CE marking.PS20AR: Conforms to Safety Standard IEC 60065. Certified TÜV Rhein-land, Argentina S.A., No. RA2681022.A ministerial license may be required to operate this equipment in certain ar-eas. Consult your national authority for possible requirements.This radio equipment is intended for use in musical professional entertain-ment and similar applications.Les transmetteurs modèle Shure PGX1 et PGX2 :Type accepté sous FCC partie 74 (FCC ID : « DD4SLX1 » et « DD4SLX2 »). Certifié par IC au Canada sous RSS-123 et RSS-102 (« IC : 616A-SLX1 » et « IC: 616A-SLX2 »). Conforme aux exigences essentielles de la directive européenne R&TTE 99/5/CE (ETSI EN 300 422, partie 1 et 2, ETSI EN 301 489, partie 1 et 9) et sont autorisés à porter la marque CE. Le recepteur modèle Shure PGX4 :Autorisé aux termes de la clause de Déclaration de conformité de la FCC section 15B. Certifié par IC au Canada sous RSS-123 (« IC: 616A-PGX4 »). Conforme aux exigences essentielles de la directive européenne R&TTE 99/5/CE (ETSI EN 300 422, partie 1 et 2, ETSI EN 301 489, partie 1 et 9) et sont autorisés à porter la marque CE.
SHURE PGX WIRELESS102Les blocs d’alimentation PS20E et PS20UK :Conforme aux spécifications IEC 60065 et sont autorisés à porter la mar-que CE.PS20AR: Conforme aux spécifications IEC 60065. Certifié TÜV Rhein-land, Argentina S.A.Autorisation d'utilisation : Une licence officielle d'utilisation de ce matériel peut être requise dans certains pays. Consulter les autorités compétentes pour les exigences possibles.Ce matériel radio est prévu pour une utilisation en spectacles musicaux professionnels et applications similaires.Die Senders Modells PGX1 und PGX2: Typenzulassung unter FCC Teil 74 (FCC ID: „DD4SLX1” und „DD4SLX2”). Zugelassen durch die IC in Kanada unter RSS-123 und RSS-102 („IC: 616A-SLX1” und „IC: 616A-SLX2”). Entsprechen den Grundanfor-derungen der europäischen R&TTE-Richtlinie 99/5/EC (ETSI-Normen EN 300 422, Teile 1 und 2, ETSI-Normen EN 301 489, Teile 1 und 9) und sind zum Tragen des CE-Zeichens berechtigt. Der Empfänger Modell PGX4: Zugelassen unter der Übereinstimmungserklärung der FCC, Teil 15B. Zu-gelassen durch die IC in Kanada unter RSS-123 („IC: 616A-PGX4”). Ent-sprechen den Grundanforderungen der europäischen R&TTE-Richtlinie 99/5/EC (ETSI-Normen EN 300 422, Teile 1 und 2, ETSI-Normen EN 301 489, Teile 1 und 9) und sind zum Tragen des CE-Zeichens berechtigt. Der netzteilen Modells PS20E und PS20UK:Entsprechen den Grundanforderungen IEC 60065 und sind zum Tragen des CE-Zeichens berechtigt. PS20AR: Entsprechen den Grundanforderungen IEC 60065. Zulassung TÜV Rheinland, Argentina S.A., No. RA2681022.Zulassung: In einigen Gebieten ist für den Betrieb dieses Geräts u.U. eine behördliche Zulassung erforderlich. Wenden Sie sich bitte an die zuständige Behörde, um Informationen über etwaige Anforderungen zu erhalten.Diese Funkausrüstung ist zum Gebrauch bei professionellen Musikveran-staltungen und ähnlichen Anwendungen vorgesehen.Los transmisores modelos PGX1 y PGX2:Aceptado por especimen bajo las normas de la FCC (Comisión Federal de Comunicaciones de los EE.UU.) (FCC ID: "DD4SLX1" y "DD4SLX2"). Certificados en Canadá por la IC bajo la norma RSS-123 y RSS-102 ("IC: 616A-SLX1" y "616A-SLX2"). Cumple con los requisitos esenciales de la di-rectriz europea 99/5/EC de RTTE (ETSI EN 300-422, partes 1 y 2, ETSI EN 301 489, partes 1 y 9) y califican para llevar la marca CE.
ENGLISH103El receptor modelo PGX4:Autorizado según la cláusula de Declaración de homologación de la parte 15B. Certificados en Canadá por la IC bajo la norma RSS-123 (“IC: 616A-PGX4”). Cumple con los requisitos esenciales de la directriz eu-ropea 99/5/EC de RTTE (ETSI EN 300-422, partes 1 y 2, ETSI EN 301 489, partes 1 y 9) y califican para llevar la marca CE. Las fuentes de alimentación modelos PS20E y PS20UK:Cumple la norma IEC 60065 y califican para llevar la marca CE.PS20AR: Cumple la norma IEC 60065. Certificado TÜV Rheinland, Argentina S.A., No. RA2681022.Licencia de uso: Se puede requerir una licencia ministerial para utilizar este equipo en algunas áreas. Consulte a la autoridad nacional sobre los po-sibles requisitos.Este equipo de radio está destinado para uso en presentaciones musica-les profesionales y situaciones similares.I trasmettitori Shure modellos PGX1 e PGX2:Di tipo approvato secondo le norme FCC Parte 74 (FCC ID: "DD4SLX1" e "DD4SLX2"). Omologato dalla IC in Canada a norma RSS-123 e RSS-102 ("616A-SLX1" e "616A-SLX2"). Conforme ai requisiti essenziali specificati nella direttiva europea R&TTE 99/5/EC (ETSI specificati nella norma EN 300 422, Parte 1 e Parte 2, ETSI specificati nella norma EN 301 489, Parte 1 e Parte 9) e possono essere contrassegnati con il marchio CE. Il ricevitore Shure modello PGX4:Omologato secondo la clausola di Dichiarazione di conformità delle nor-me FCC, Parte 15B. Omologato dalla IC in Canada a norma RSS-123 (“IC: 616A-PGX4”). Conforme ai requisiti essenziali specificati nella direttiva eu-ropea R&TTE 99/5/EC (ETSI specificati nella norma EN 300 422, Parte 1 e Parte 2, ETSI specificati nella norma EN 301 489, Parte 1 e Parte 9) e pos-sono essere contrassegnati con il marchio CE. Di alimentatori PS20E e PS20UK:Conforme alle norme IEC 60065 e possono essere contrassegnati con il marchio CE.PS20AR: Conforme alle norme IEC 60065. Certificato TÜV Rheinland, Argentina S.A., No. RA2681022.Concessione della licenza all'uso: per usare questo apparecchio, in certe aree può essere necessaria una licenza ministeriale. Per i possibili requisiti, rivolgersi alle autorità competenti.Questo apparecchio radio è inteso per intrattenimento a livello professio-nale ed applicazioni simili.
SHURE PGX WIRELESS104
ENGLISH105

Navigation menu