Shure orporated PA821SWB Antenna Combiner User Manual PA821SWB en

Shure Incorporated Antenna Combiner PA821SWB en

user manual

Model PA821SWBUser Guide©2008 Shure Incorporated27A12135 (Rev. 1) Printed in U.S.A.PSM® Antenna Combiner User GuideGuide de l'utilisateur du répartiteur d'antenne PSMBedienungsanleitung für die Antennenweiche PSMGuía del usuario del combinador de antenas PSMGuida d'uso del combinatore di antenne PSMPA821SWBPSM Antenna Combiner470-952MhzMAINOUTINPUT SIGNALACTIVE COMBINER1234567850OHMSAINBINEXPANSIONPORTA+BOUTPOWER
2ENGLISHDESCRIPTIONThe Shure PA821SWB Antenna Combiners actively combine antennaoutputs from up to eight PSM wireless transmitters to a single antenna, im-proving RF performance and reducing rack clutter.INSTALLATIONSet the power switch on the front panel to OFF before installing. Connectthe unit to an AC power source using the supplied power cable. Switch thepower ON to use the device. The power light will illuminate. Power the unitOFF when not in use or before disconnecting the unit from the AC powersource.8-TO-1 COMBINING:1. Using the supplied BNC-BNC cables, connect the ANTENNA OUTPUT of each transmitter to the ANTENNA INPUTS of the PA821SWB (Figure 2).2. Attach an antenna to the MAIN OUT of PA821SWB. For wideband applications, use PA805SWB directional antenna (Figure 1).3. Connect the PA821SWB to a power outlet using one of the supplied power cables. The PA821SWB contains a universal power supply to operate anywhere in the world.NOTE: When the PA821SWB is powered on, the input signal indicators (1-8) on the front panel will illuminate if an active transmitter is connected to the corresponding input (1-8) on the back panel (Figure 1).FIGURE 1FIGURE 2! IMPORTANT SAFETY INSTRUCTIONS !1. READ these instructions.2. KEEP these instructions.3. HEED all warnings.4. FOLLOW all instructions.5. DO NOT use this apparatus near water.6. CLEAN ONLY with dry cloth.7. DO NOT block any ventilation openings. Install in accordance with the manu-facturer's instructions. 8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9. DO NOT defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your out-let, consult an electrician for replacement of the obsolete outlet.10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11. ONLY USE attachments/accessories specified by the manufacturer.12.13. UNPLUG this apparatus during lightning storms or when unused for long periods of time.14. REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is dam-aged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.15. DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled with liquids, such as vases, on the apparatus.16. The MAINS plug or an appliance coupler shall remain readily operable.17. The airborne noise of the apparatus does not exceed 70dB (A).18. Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection.19. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 20. Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all servicing to qualified service personnel. The safety certifications do not apply when the operating voltage is changed from the factory setting. PSM TransmittersACPOWER
3ENGLISHFOR MORE THAN 8 TRANSMITTERS:1. Using the supplied BNC-BNC cables, connect the ANTENNA OUTPUT of each transmitter to the ANTENNA INPUTS of the PA821SWB.2. Use the 1 ft. jumper BNC-BNC cable to connect the MAIN OUTPUT of the PA821SWB to the A IN of the EXPANSION PORT. 3. Connect another ANTENNA OUTPUT (from a ninth PSM trans-mitter, second PA821SWB or other antenna port) to the B IN of the EXPANSION PORT.4. Attach an antenna to the A + B OUT of the EXPANSION PORT. For wideband applications, use the PA805-SWB directional antenna, Figure 3.FIGURE 3SPECIFICATIONSRF Carrier Frequency Range470-952 MHzSystem Gain+0/-5 dBInput AC Line Voltage100-240 Vac, 50/60 HzMaximum Input Line VA100 VAMaximum Current Drain0.42-1.0 Amperes(Amperes = 100 VA/Input AC Line Voltage)Maximum RF Input Power24 dBm (250 mW) per channelInput Signal Indicator Threshold+4 dBm (2.5 mW), +2 dBm (1.6 mW) typicalImpedance50 Ω nominalOperating Temperature Range0° F (-18° C) to +135° F (+57° C) NOTE: Electrical safety approval is based on a maximum ambient temperature of 35°C.Overall Dimensions43.4 mm high x 398.8 mm wide x331.5 mm deep(1 11/16 in. H x 15 11/16 in. W x 13 1/2 in. D)Net Weight4.53 Kg (10 lbs unpackaged, without power and RF cables)Input/Output Connector TypeBNC-type 8 input, 1 output ACTIVE2 Inputs, 1 output EXPANSION PORTFURNISHED ACCESSORIES(8) 2 ft. Coaxial Cable (RG58C/U).................................... UA8021 ft Jumper..................................................................... 95E2035120 VAC Power Line Cord............................................. 95A8389230 VAC Power Line Cord............................................. 95A8247240 VAC Power Line Cord (U.K.) .................................. 95A8713OPTIONAL ACCESSORIESWideband Unidirectional Antenna (470-952 MHz) ....PA805SWB10 ft. Coaxial Cable (RG-8X/U) .........................................PA72525 ft. Coaxial Cable (RG-8X/U) ........................................ UA82550 ft. Coaxial Cable (RG-8X/U) ........................................ UA850 50Ω BNC PSM Transmitters AC POWER
4ENGLISHCERTIFICATIONSPA821SWB: Certified to FCC Part 74 (FCC ID No. DD4PA821SWB).Certified in Canada by IC to RSS-123 AND RSS-102 (Certification No.IC: 616A-PA821SWB). UL LISTED to UL6500 (2nd Edition) and cULLISTED to CAN/CSA E60065-00. Meets the Essential Requirements ofthe European R&TTE Directive 99/5/EC, eligible to bear CE mark. MeetsEMC requirements of EN 301 489 Parts 1 and 9 and is GS-Certified toEN 60065 (6th Edition). Conforms to Australian EMC requirements,eligible to bear C-Tick mark (N108).LICENSINGChanges or modifications not expressly approved by Shure Incorporat-ed could void your authority to operate the equipment. Licensing of Shurewireless microphone equipment is the user's responsibility, and licensabil-ity depends on the user's classification and application, and on the selectedfrequency. Shure strongly urges the user to contact the appropriate tele-communications authority concerning proper licensing, and before choos-ing and ordering frequencies.THIS RADIO EQUIPMENT IS INTENDED FOR USE IN PROFES-SIONAL ENTERTAINMENT AND SIMILAR APPLICATIONS.NOTE: THIS EQUIPMENT MAY BE CAPABLE OF OPERATING ON SOME FREQUENCIES NOT AUTHORIZED IN YOUR REGION. PLEASE CONTACT YOUR NATIONAL AUTHORITY TO OBTAIN INFORMATION ON AUTHORIZED FREQUENCIES FOR WIRELESS MICROPHONE PRODUCTS IN YOUR REGIONLicensing: Note that a ministerial license to operate this equipment may be required in certain areas. Consult your national authority for possible requirements.N 108

Navigation menu