Shure orporated PA421A Antenna Combiner User Manual Exhibit D Users Manual per 2 1033 c3

Shure Incorporated Antenna Combiner Exhibit D Users Manual per 2 1033 c3

Exhibit D Users Manual per 2 1033 c3

User GuidePrinted in U.S.A.©2011 Shure IncorporatedPA421A PSM® Antenna CombinerGuide de l’utilisateur du répartiteur d’antenne PSM® Bedienungsanleitung für die Antennenweiche PSM® Guía del usuario del combinador de antenas PSM® Guida d’uso del combinatore di antenne PSM® Guia de usuário do combinador da antenas PSM® Руководство пользователя Combiner антенны PSM® PSM® アンテナコンバイナ ユーザーガイドPSM® 天线合并器用户指南PSM® 天線合併器用戶指南PSM® Antenna Combiner 사용자 설명서 N108
2OVERVIEWThe Shure PA421A Antenna Combiners actively combine antenna outputs from up to four PSM wireless transmitters to a single antenna, improving RF performance and reducing rack clutter.INSTALLATION1. Before installing, set the front panel power switch to OFF. (See Figure 1)2. Using the supplied power cable connect the unit to an AC power source.3. To use the device set the front panel power switch to ON. The power light will illuminate.4. Before disconnecting the unit from the AC power source, or when not in use, power the unit OFF. PA421A Benefits• Reduction of intermodulation artifacts for cleaner RF environment and more channels on air• Simplified antenna placement• Power distribution! IMPORTANT SAFETY INSTRUCTIONS !1. READ these instructions.2. KEEP these instructions.3. HEED all warnings.4. FOLLOW all instructions.5. DO NOT use this apparatus near water.6. CLEAN ONLY with dry cloth.7. DO NOT block any ventilation openings. Install in accordance with the manu-facturer's instructions. 8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli ers) that produce heat.9. DO NOT defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not t into your out-let, consult an electrician for replacement of the obsolete outlet.10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11. ONLY USE attachments/accessories by the manufacturer.12.13. UNPLUG this apparatus during lightning storms or when unused for long periods of time.14. REFER all servicing to quali ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is dam-aged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.15. DO NOT expose the apparatus to dripping and splashing. DO NOT put objects lled with liquids, such as vases, on the apparatus.16. The MAINS plug or an appliance coupler shall remain readily operable.17. The airborne noise of the apparatus does not exceed 70dB (A).18. Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection.19. To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture. 20. Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.USE only with a cart, stand, tripod, bracket, or table speci ed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all servicing to quali ed service personnel. The safety certi cations do not apply when the operating voltage is changed from the factory setting.WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.Switch Off
34-TO-1 COMBINING FOR PSM TRANSMITTERS1. Using the supplied BNC-BNC cables, connect the Antenna Output of each transmitter to the Antenna Inputs of the PA421A (See Figure 2).2. Attach an antenna to the MAIN Out of PA421A. For wideband applications, use PA805SWB directional antenna (Figure 2).3. Connect the PA421A to a power outlet using one of the supplied power cables. The PA421A contains a universal power supply to operate anywhere in the world.4. If you have a Shure PSM system that has the same power input connectors as the PA421A power outputs, such as the PSM900, connect the PSM system to the PA421A via the supplied power cables (see figure 2). This replaces the need for an external power supply.NOTE: The PA421A supplied power is 15 V and up to 660 mA.®PA80 5WBFigure 2NOTE: When the PA421A is powered on, the input signal indicators (1-4) on the front panel will illuminate if an active transmitter is connected to the corresponding input (1-4) on the back panel (Figure 2).SPECIFICATIONSRF Carrier Frequency Range 470-952 MHzSystem Gain +0/-5 dBInput AC Line Voltage 100-240 Vac, 50/60 HzMaximum Input Line Power 1.2A 80WMaximum Current Drain 0.42-1.0 Amperes(Amperes = 100 VA/Input AC Line Voltage)Maximum RF Input Power 24 dBm (250 mW) per channelInput Signal Indicator Threshold +4 dBm (2.5 mW), +2 dBm (1.6 mW) typicalImpedance 50 Ω nominalOperating Temperature Range 0° F (-18° C) to +145° F (+63° C)NOTE: Electrical safety approval is based on a maximum ambient temperature of 30°C.Overall Dimensions 43.4 mm high x 398.8 mm wide x331.5 mm deep (1 11/16 in. H x 15 11/16 in. W x 13 1/2 in. D)Net Weight 4.53 Kg(10 lbs unpackaged, without power and RF cables)Input/Output Connector Type BNC-type 4 input, 1 output ACTIVEPower Outputs (4) 15 VDC, 660 mA eachFURNISHED ACCESSORIES(4) 2 ft. Coaxial Cable (RG58C/U) UA802(4) 2 ft. Output Power Cable 95B8420120 VAC Power Line Cord 95A8389230 VAC Power Line Cord 95A8247240 VAC Power Line Cord (U.K.) 95A8713OPTIONAL ACCESSORIESWideband Unidirectional Antenna (470-952 MHz)PA805SWB10 ft. Coaxial Cable (RG-8X/U) PA72525 ft. Coaxial Cable (RG-8X/U) UA82550 ft. Coaxial Cable (RG-8X/U) UA850Wide Band Omnidirectional Antenna (470-1100 MHz) UA860SWBHelical Antenna HA-8089 (480-900 MHz)HA-8241(944-952 MHz)AC PowerPSM Transmitters50Ω BNCCERTIFICATIONSPA421A: Certified to FCC Part 74 (FCC ID No. DD4PA421A). Certified in Canada by IC to RSS-123 AND RSS-102 (Certification No. IC: 616A-PA421A). UL LISTED to UL60065, 7th Edition and cUL LISTED to CAN/CSA E60065-00. Meets the Essential Requirements of the European R&TTE Directive 99/5/EC, eligible to bear CE mark. Meets EMC requirements of EN 301 489 Parts 1 and 9 and is GS-Certified to EN EN60065, 7th Edition. Conforms to Australian EMC requirements, eleigible to bear C-Tick mark (N108). LICENSINGChanges or modifications not expressly approved by Shure Incorporated could void your authority to operate the equipment. Licensing of Shure wireless microphone equipment is the user’s responsibility, and licensability depends on the user’s classification and application, and on the selected frequency. Shure strongly urges the user to contact the appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies.THIS RADIO EQUIPMENT IS INTENDED FOR USE IN PROFESSIONAL ENTERTAINMENT AND SIMILAR APPLICATIONS.NOTE THIS EQUIPMENT MAY BE CAPABLE OF OPERATING ON SOME FREQUENCIES NOT AUTHORIZED IN YOUR REGION. PLEASE CONTACT YOUR NATIONAL AUTHORITY TO OBTAIN INFORMATION ON AUTHORIZED FREQUENCIES FOR WIRELESS MICROPHONE PRODUCTS IN YOUR REGION.Licensing: Note that a ministerial license to operate this equipment may be required in certain areas. Consult your national authority for possible requirements.165VAAC Current MaxPower MaxApparent Power Max1.4A82W170VA
www.shure.com ©2010 Shure IncorporatedEurope, Middle East, Africa:Shure Europe GmbHWannenäckestr. 28,74078 Heilbronn, GermanyPhone: 49-7131-72140Fax: 49-7131-721414Email: info@shure.deAsia, Pacific:Shure Asia Limited22/F, 625 King’s RoadNorth Point, Island EastHong KongPhone: 852-2893-4290Fax: 852-2893-4055Email: info@shure.com.hkUnited States, Canada, Latin America, Caribbean:Shure Incorporated5800 West Touhy AvenueNiles, IL 60714-4608 USAPhone: 847-600-2000Fax: 847-600-1212 (USA)Fax: 847-600-6446Email: info@shure.com

Navigation menu