Shure orporated AD651B Talk Switch User Manual Exhibit D Users Manual per 2 1033 b3

Shure Incorporated Talk Switch Exhibit D Users Manual per 2 1033 b3

Exhibit D Users Manual per 2 1033 b3

AD651 Talk SwitchAdding a talk swtich to Axient Digital ADX series transmitters adds remote push-button routing options for the audio outputs of Axient Digital AD4 receivers. To activate audio routing, press and hold the talk switch button.Battery InstallationInstall the battery to power the talk switch.1. Open the battery cover.2. Insert the battery with the polarity as shown.3. Close the battery cover. Switch Installation1. The the microphone cartridge on to the talk switch.2. thread the switch on to the transmitter body.Tip: Rotate the switch ring to align with the display.Choosing Receiver Audio Output RoutingTalk switch routing is configured in the channel menu of the receiver.The configuration options let you switch the following receiver outputs by pressing the button:• XLR• TRS• AES3• Dante1. From the channel menu of the receiver select: Advanced > Talk Switch/Output Routing.2. Use the control wheel to select output routing options: - Normal: Output will follow the On/Off selections when the button is released - Pressed: Output will follow the On/Off selections when the button is pressed3. Select Exit to save and return to the channel menu.Note: In the example shown, The XLR output will turn off when the switch is pressed and the TRS output will turn on.Assigning a Talk Switch to a TransmitterTo enable remote control, the talk switch needs to be assigned using the Talk Sw parameter of the transmitter menu.1. Navigate to the Utilities menu of the transmitter and select Talk Sw.2. Select O to add a talk switch.3. Press the talk switch button twice to assign the talk switch. The dis-play will show the talk switch model name to confirm assignment.4. Press the talk switch button to confirm control. The talk switch icon and battery status will appear with each push of the button. Talk SwitchOK5. Select X to exit. Tip: To unassign a talk switch, highlight the switch name in the transmit-ter Talk Sw menu and select ⌄ . Press O to confirm. DRAFT 7.16.18
Routing the Audio Output with the Talk SwitchWhen the talk switch is pressed, the receiver audio is routed to the selected output. Releasing the switch returns the routing to the normal signal paths.Tip: The color of the channel icon on the receiver display inverts when the talk switch is pressed. SpecificationsDiameter 40 mm (1.57 in.) (OD)Height 39 mm (1.53 in.)Weight (without battery) 57 g (2.0 oz.)Housing Material AluminumSwitch Material PlasticRF Output ZigbeeOperating Temperature -18°C (0°F) to 50°C (122°F)*Storage Temperature -29°C (-20°F) to 74°C (165°F)*Switch Material ABS PlasticBattery Type (not included) SR44 (1.55 V DC)*Battery characteristics may limit this range.CertificationsMeets essential requirements of the following European Directives: • EMC Directive 2004/108/EC• Battery Directive 2006/66/ECPlease follow your regional recycling scheme for battery disposal.PT. GOSHEN SWARA INDONESIAKompleks Harco Mangga Dua Blok L No. 35 Jakarta PusatI.16.GSI31.00501.0211Europe, Middle East, Africa:DRAFT 7.16.18

Navigation menu