Shintom Co M5016 PCS handset User Manual manual 3

Shintom Co Ltd PCS handset manual 3

manual 3

103. Getting StartedSIM CardYour small-sized SIM (Subscriber Identity Module) card will beprovided by your service provider. It contains your phone numberand billing details. So please protect it and keep it in a secure place.Inserting the SIM Card1Insert the bevelled end of the SIM card into the SIM card socket.Make sure the metal contact faces down when you insert it.2Push the SIM card completely into the socket.3While holding down the SIM card, slide the metal SIM cardstopper to securely fasten the SIM card in place as shown below.RemovalRemove the SIM card by reversing the insertion procedure.3. Getting StartedBack of the Phone(Battery removed)SIM CardSIM card stopper CEL GDU325 (p.01-20) Eng.pm6 8/2/01, 10:10 AM10
11NOTES:- Before inserting or removing your SIM card, make sure toturn off your phone.- Be careful in handling, inserting, and removing your SIMcard. The SIM card and its contacts will easily be damagedby scratches or bending.- Network operators offer various types of services and SIMcards. So depending on the type of your SIM card, somefeatures mentioned in this manual may not be availableor may not be operated in the way mentioned.- If your phone is used without the SIM card, “Insert SIMcard” will be displayed.- Emergency calls can be placed without the SIM card.- Keep your SIM card out of the reach of small children.3. Getting Started CEL GDU325 (p.01-20) Eng.pm6 8/2/01, 10:10 AM11
12Battery OperationBe sure that your battery is fully charged before using yourphone for the first time. Your phone will not operate without acharged battery.Battery Insertion/RemovalBattery Insertion Battery RemovalNOTE:- Make sure that your SIM card is correctly inserted intoyour phone before battery insertion.Battery ChargingAn animation will be displayed and the battery level indicator willstart scroll while your battery is charging. When the battery is fullycharged, battery level indicator stops scrolling.After the battery is fully charged, disconnect the charger from thephone.NOTES:- The standard battery will be fully charged in about 3hours. However, actual charging time varies with batteryconditions.- To place or receive calls during charging, press and hold to turn your phone on. After calls, press and hold again to turn your phone off.- Depending on the condition of the battery , theanimation may not be output to the display for severalminutes after the battery starts to recharge, but this is nota malfunction.- Attach the adapter with the battery in the installed state.3. Getting Started CEL GDU325 (p.01-20) Eng.pm6 8/2/01, 10:10 AM12
13CAUTIONS:• Use only the supplied adaptor. Using other adaptorscan damage the battery and/or your phone.• Do not discard the battery into fire.• To prevent injury or burns, do not allow metal objectsto contact or short circuit the battery terminals.• Do not use any batteries or chargers other than thosespecifically designed for use with this phone.• Charge the battery indoors with the ambienttemperature between 5°C and 40°C.• Do not charge the battery in direct sunlight, or in highhumidity places like a bathroom.• To avoid shortening the battery life, do not recharge or“top-off” the battery pack by charging for short periodsof time. It is recommended that the battery be chargedafter it is discharged completely.• The product that you have purchased contains arechargeable battery. The battery is recyclable. At theend of its useful life, under various local laws, it may beillegal to dispose of this battery into the municipalwaste stream. Check with your local solid wasteofficials for details in your area for recycling options orproper disposal.3. Getting Started CEL GDU325 (p.01-20) Eng.pm6 8/2/01, 10:10 AM13
144. Basic Operation4. Basic OperationTurning Your Phone On and OffTurning Your Phone OnPress and hold to turn on your phone.When your phone is in a service area, thenetwork name will be displayed.Turning Your Phone OffTo turn off your phone, press and hold again.An animation will be displayed before the actual power-off.Selecting a ModeConfirm the mode of your telephone before making a call.1Press , 7, 3, 3.2Select the mode of your choice from GSM/PCS, GSM only, andPCS only then press .Placing Calls1Enter a phone number.2Press .“Calling” will be displayed.3To end your call, press .NOTE:- When “No service” is displayed, you cannot place calls.Correcting the entered digits• Press to erase the last digit entered.• Press and hold to erase the whole number.Adjusting the Earpiece VolumeYou can adjust the earpiece volume of thephone during a call.Press to increase and to decreasethe volume level.(standby mode) CEL GDU325 (p.01-20) Eng.pm6 8/2/01, 10:10 AM14

Navigation menu