Shinpoong Electronics ZS2400 ZIGBEE SHOULDER SPEAKER MICROPHONE User Manual

Shinpoong Electronics Inc. ZIGBEE SHOULDER SPEAKER MICROPHONE

User Manual

ZS2400 User Manual( ZigBee Speaker Mic )SHINPOONG Electronics inc.
ContentsProduct overviewIn the packagePart descriptionHow to use ZS2400Mode SelectionP/ffPower on/offMode & CH Change Normal & Intercom ChangeVolume controlLow BatteryChargingSpecificationAppendixDeclaration of confirmationWARRANTY
Product OverviewThank you for choosing SEECODE ZigBee Speaker Mic. This device connect Your two-way radio to ZigBeeSpeaker Mic without wire and let you more Comfortable to use.You can put heavy two-way radio in car or office and just use ZigBee Speaker Mic. Instead. This device removes inconvenience and danger especially for police sailor Workers in plant construction site & etcremoves inconvenience and danger especially for police, sailor, Workers in plant, construction site & etc.In the packageZS2400 Charging Adaptor(5V/300mA) User,s ManualPart description
How to use ZS2400Mode SelectionThis device is available with 2 types of mode- Normal Mode : This device control transmitting/receiving remotely by connecting ZigBee module in two-way radio. This device is available with two-way radio supporting ZigBee and uses 8 channels from 11 to 18.- Intercom Mode: Once you set up a channel between ZigBee Shoulder Mic, you can transmit and receive messages each other at short range without two-way radio. Multiple users(256 people) can transmit/receive messages at short range at the same time. The device uses 8 channels from 19 to 26.Power ON IP Off h MULTIb dh ihB i dIn Power Off state, when you press MULTI button over a second, the power turns on with Booting tone and informs Mode and Channel with voice.- Normal Mode : It informs Channel information with voice.- Intercom Mode : It informs Intercom Mode and Channel information with voice.Power OFFIn Power On state, when you press MULTI button over a second, the device turn off with Booting tone.How to change Normal/Intercom ModeNormal Mode1) In Power Off state, when you press Volume Up with MULTI button, RED and BLUE LED come on with‘INTERCOM’ sound and the device goes to change mode of Normal channel.2) In this state, you can change channels from 1 to 8 by pressing Volume Up/Down button.3) After setting up a channel, when you press PTT button, it will be completed.4) When pressing MULTI button, the device turn on and you will hear set channel information after ‘INTERCOM’ sound.Intercom Mode1) In Power Off state, when you press Volume Up with MULTI button, RED and BLUE LED come on with‘INTERCOM’ sound and the device goes to change mode of Intercom channel.gg2) In this state, you can change channels from 1 to 8 by pressing Volume Up/Down button.3) After setting up a channel, when you press PTT button, it will be completed.4) When pressing MULTI button, the device turn on and you will hear set channel information after ‘INTERCOM’ sound.How to Change Normal/Intercom ModeWhile using the device you can change to Normal/Intercom mode You should press Volume Up button over aWhile using the device you can change to Normal/Intercom mode. You should press Volume Up button over a second for changing from present mode to other.If you are using normal mode now, it will change intercom mode and inform ‘INTERCOM’ and channel information by voice. But if you are using Intercom mode now, you will hear only Channel information when it goes to Normal mode.
Volume ControlThere are 5 levels of volume. You can control by pressing Volume Up/Down button. When you control volume in standby state, you hear beeps. But in receiving state, in order to prevent cutting off receiving voice, you can control the volume without hearing beeps prevent cutting off receiving voice.ChargingLow-Battery StateIn Low-Batter State, it beeps at interval of 5 seconds and turns off automatically after 5 minutes with booting sound. The device will not turn on again unless you recharge it. ChargingThis device can be charged in On/Off state in any circumstances.ZigBee speaker Mic has a built-in battery and needs to be fully charged before using. You can charge with Charging Adapter. Charging time is less than 3 hours and BLUE/RED LEDs blink every 3 seconds. All LEDs turn off when charging is completed.When you charge in ‘On’ state, RED LED will turn off and BLUE LED blinks every 5 seconds. When it charge in ‘OFF’ state, all LEDs turn off.gSpecification
Declaration of confirmationWARRANTY
FCC Information to UserThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected.• Consult the dealer or an experienced radio/TV technician for help.CautionModifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operationIMPORTANT NOTE:IMPORTANT Safety Instruction: 1) Read these instructions.2) Keep these instructions.3) Heed all warnings.4) Follow all instructions. 5) Do not use this equipment near water.6) Do not using near any heat sources such as radiators, heat resisters, stove, or other equipment that produce heat.
Information to user.The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. In cases where the manual is provided only in a form other than paper, such as on a computer disk or over the Internet, the information required by this section may be included in the manual in that alternative form, provided the user can reasonably beexpected to have the capability to access information in that form.Shinpoong Electronics Inc. A1107, Gwangmyeong TechnoPark, 60, Haan-ro, Gwangmyeong-si, Gyeonggi-do, KOREATEL : +82-70-8855-8300 / FAX : +82-2-2083-2272 / E-mail : jaebongoh@hanmail.net
CONTACT INFORMATION Manufacturer Address : A1107, Gwangmyeong TechnoPark, 60, Haan-ro, Gwangmyeong-si, Gyeonggi-do, KOREA To locate in-country Shinpoong Electronics Inc., distributors of the ZigBee Shoulder Speaker Microphone please refer to the Shinpoong Electronics Inc. Website http://www.seecode.com These distributor(s) represent local contacts for this product. CORPORATE HEADQUARTERS: Shinpoong Electronics Inc. A1107, Gwangmyeong TechnoPark, 60, Haan-ro, Gwangmyeong-si, Gyeonggi-do, KOREA Tel: +82-70-8855-8300 Fax: +82-2-2083-2272 E-mail: jaebongoh@hanmail.net Web: http:// www.seecode.com This device complies with Industry Canada license-exempt RSS standard(s). Operation is Subject to the following two condition: (1) this device may not cause interference ,and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
EUROPEAN UNION “DECLARATION OF CONFORMITY” DECLARATION OF CONFORMITY Shinpoong Electronics Inc. A1107, Gwangmyeong TechnoPark, 60, Haan-ro, Gwangmyeong-si, Gyeonggi-do, KOREA declare under our sole responsibility that the product(s) ZigBee Shoulder Speaker Microphone – ZS2400 to which this declaration relate(s) is in conformance with the following standards: EN 301 489-1 V1.9.2:2011 EN 301 489-17 V2.2.1 :2012 EN60950-1:2006 EN 300 328 V1.7.1:2006 following the provisions of the 1999/5/EC Directives.

Navigation menu