Shin Chuan Computer SC700PDT-BWG Portable Data Terminal User Manual rev2

Shin Chuan Computer Co., Ltd. Portable Data Terminal rev2

Contents

Manual 2

3-21 C Type -- Others Barcodes 3.2.2.15 China Post Figure 3-20 China Post Table 3-18 China Post Explaining Item Explaining Checksum Verify Whether verify checksum by barcode. Send Check Digit Whether send check digit by barcode. Min Length can be set from 4 to 48 Min-Max (Default: 4 / 48) Max Length can be set from 4 to 48 Length 1 can be set from 4 to 48 Length 2 can be set from 4 to 48 Length Fixed Length 3 can be set from 4 to 48
3-22 3.2.2.16 Code4 The barcode do not have setting. Figure 3-21 Code4 3.2.2.17 GTIN The barcode do not have setting. Figure 3-22 GTIN
3-23 3.2.2.18 Korea Code 3 of 5 The barcode do not have setting. Figure 3-23 Korea Code 3 of 5 3.2.2.19 RSS Figure 3-24 RSS Table 3-19 RSS Explaining Item Explaining Convert to UCC128 The scanner will convert RSS to UCC128. Checksum Verify Whether verify checksum by barcode.
3-24 3.2.3 Bluetooth Device Properties Table 3-20 Bluetooth Device Properties ICON ITEM & FUNCTION  “BT Service” Tab ( Figure 3-25) :  Tap the “Enable Bluetooth Device” to enable Bluetooth device.  Wait for 20 seconds in order to initialize the Bluetooth hardware correctly.  Click “Scan Device Service” to pop “Bluetooth Manager” window. Then tap the Scan Device button to initiate a scan for Bluetooth hardware. The Bluetooth manager lists the Bluetooth devices that it finds, see Figure 3-26. If Bluetooth hardware is not found the Bluetooth Hardware Error window appears, see Figure 3-27. Table 3-21 described the Bluetooth Icons.  Double tap the device to connect to on the device list. The Bluetooth Manager Authentication window appears. Tap No to connect to the device without authentication, or tap Yes to authenticate the device before connecting. (Figure 3-28)  If the Yes button was selected in the Bluetooth Manager Authentication window, the enter PIN windows appears. Enter a PIN (between 1 and 16 characters) in the Enter PIN: text box, and tap OK. The mobile computer sends the PIN request to the device for bonding. (Figure 3-29)  When prompted, the same PIN must be entered on the other device. When the PIN is entered correctly on the other device, the bonded icon appears on the device list. (Figure 3-30)  “Serial Port” Tab ( Figure 3-30-1) :  Tap the “Enable Bluetooth Device” to enable Bluetooth device.  Wait for 20 seconds in order to initialize the Bluetooth hardware correctly.  If want to use Virtual com, only SPP base profiles are supported.(i.e. Printer, Modem, and LAP).Switch to “Serial Port” tab, and will see the devices you had trusted or active. Select the device that you want to map a virtual com and which virtual com you want to use.  Now COM1 has mapped for BT device.
3-25 Figure 3-25 Bluetooth Device Properties Figure 3-25-1 Bluetooth Device Properties Figure 3-26 Bluetooth Manager Windows Figure 3-26-1 Bluetooth Manager Windows Figure 3-27 Bluetooth Error Windows Figure 3-28 Bluetooth Manager Windows
3-26 Figure 3-29 Bluetooth Enter PIN Windows Figure 3-30 Bluetooth Manager Windows Figure 3-30-1 Bluetooth Manager Windows Figure 3-30-2 Bluetooth Manager Windows
3-27 Figure 3-30-3 Bluetooth Manager Windows Figure 3-30-4 Bluetooth Manager Windows Note: If the device to which the mobile computer is bonding does not appear in the list, ensure it is turned on, in discoverable mode, and within range (30 feet / 10 meters) of the mobile computer. Table 3-21 Bluetooth Icon Icon Description Unknown device icon Device is not defined Locked icon Device is locked and cannot be bonded to. Not locked icon Device is not locked and can be bonded to. Bluetooth device icon Bluetooth device Bonded device icon Bonded Bluetooth device Mobile device icon Device is a mobile device Phone icon Device is a phone. Printer icon Device is a printer Network icon Device is a network.
3-28 Icon Description Linked icon Device is linked. 3.2.4 Certificates Certificates are used by some applications for establishing trust and for secure communications. Certificates are signed and issued by certificate authorities and are valid for a prescribed period of time. Windows CE manages multiple certificate stores. Table 3-22 Certificates ICON ITEM & FUNCTION  “Store” Tab ( Figure 3-31) :  In the Stores tab, select the certificate store you wish to view or modify from the drop-down list (Figure 3-32).  The “Trusted Authorities “store lists the top-level certificates for authorities you trust.( Figure 3-33 , Figure 3-34)  The “My Certificates “store contains your personal certificates, which you use to identify yourself.  Intermediate certificate authorities that help establish a chain of trust are stored in the “Other Authorities” store.  “Store” Tab :  To add a certificate or associated private key to the selected store, select “Import” (Figure 3-35).  To view more details of the selected certificate, such as the expanded name or expiration date, choose “View”.  To delete the selected certificate from the store, choose “Remove”.
3-29 Figure 3-31 Certificates Figure 3-32 Certificates Figure 3-33 Certificates Figure 3-34 Certificates Figure 3-35 Certificates
3-30 3.2.5 Control Center The Control Center includes four AP, listed the following ...... Figure 3-36 Control Center 3.2.5.1 Information Table 3-23 Information ICON ITEM & FUNCTION  “Information” Tab :  Provide Software version, MAC address, Bluetooth ID, Serial No. and Configuration No.
3-31 3.2.5.2 Brightness Table 3-24 Brightness ICON ITEM & FUNCTION LCD Brightness Tune the LCD brightness by tapping right-arrow & left-arrow. Can also tune the LCD brightness by pressing right-direction key or left-direction key of keypad. Amounts 7 steps: Every step have corresponding picture of self. 1. 2. 3. 4. 5. 6. 7. Enable Keypad Brightness Open keypad brightness or not. Backlight Timeout Save battery life by automatically turning off the backlight when not used. The table must disable when its item is not marked. Battery Power, turn off backlight after The table has 15 seconds, 30 seconds, 1 minute, 2 minutes and 5 minutes. The table must disable when its item is not marked. AC Power, turn off backlight after The table has 15 seconds, 30 seconds, 1 minute, 2 minutes and 5 minutes. Dim backlight after 20 seconds of idleness. Save battery life functionally of idleness mode, open it or not.
3-32 Figure 3-37 Brightness 3.2.5.3 Backup Restore Table 3-25 Backup Restore ICON ITEM & FUNCTION 1. You can backup/restore system to/from flash disk or inserted memory card. (A. Disk on Chip, B. CF Card, C. SD Card) ( Figure 3-38) 2. When you launch this AP, it must check backup file in DOC first. And if you select other storage, it will check again. 3. Then if it has the file, appeared its date behind “Last backup date:”; if not, disable “Restore Now” Button. 4. When you press the Backup/Restore Button will be a warning dialog pop up. ( Figure 3-39) 5. When system backup/restoring finished will be a message dialog will pop up. (A. Backup: Figure 3-40, B. Restore: Figure 3-41)
3-33 Figure 3-38 Backup Restore Figure 3-39 Backup & Restore Start Figure 3-40 Backup OK Figure 3-41 Restore OK 3.2.5.4 Fn-key Settings Table 3-26 Fn-Key ICON ITEM & FUNCTION  Fn-Key Setting (Figure 3-42) Fn Key The Application Program of default setting F1 Internet Explorer F2 Microsoft WordPad F3 Inbox F4 My Computer F5 Barcode Settings F6 Media Player F7 Calculator Only for SC720
3-34 F8 Information  To assign your favorite application program to Hot Keys.  Choose one of Hot Keys from pull-down list.(Figure 3-43)  To tap “Browse…” inside “Assign program” applet.  Select one application program you want from program list, then, choose “OK”. (Figure 3-43)  To tap “Default” to return back to default setting. (Figure 3-42) Figure 3-42 Fn-Key Settings Figure 3-43 Fn-Key Settings 3.2.6 Date/Time Table 3-27 Date/Time ICON ITEM & FUNCTION  “Date/Time” Tab :( Figure 2-14)  Please see the detail information of 2.5.1 Setting Time and Date on P.2-21
3-35 3.2.7 Dialing Properties Table 3-28 Dialing properties ICON ITEM & FUNCTION  “Dialing Properties” Tab :( Figure 3-44)  In the When dialing from list, select the “Location” where you want to change settings.(Figure 3-45)  To create a new location, select “New”. Enter the name of the location, and then select “OK”.(Figure 3-46)  Enter or edit the area code and local country code as needed.  In Dial using, select “Tone dialing” or “Pulse dialing”. Most phone lines are tone.  To automatically disable call waiting, select “□□□□ Disable call waiting by dialing”, select the appropriate number sequence in the list, or enter a new sequence.  Editing dialing patterns (Figure 3-47)  Using the codes listed in the topic; revise the dialing patterns as needed. Notes:  If you need to use character other than the ones listed here, use manual dialing.  Hyphens and spaces in dialing strings are ignored.  Some modems may not respond to the following characters, even though your device lets you add them to the dial string.
3-36 Figure 3-44 Dialing Properties Figure 3-45 Dialing Properties Figure 3-46 Dialing Properties Figure 3-47 Dialing Properties
3-37 3.2.8 Display Properties Table 3-29 Display properties ICON ITEM & FUNCTION  “Background” Tab :( Figure 3-48)  From the “Image” list, select an image you want as the background of the desktop.(Figure 3-49)  To locate an image in another folder, select “Browse”.(Figure 3-50)  To have the image cover the entire background, select “ □□□□Tile image on background”  “Appearance” Tab(Figure 3-51)  Change the color scheme :( Figure 3-52)  From the” Scheme” list, select a scheme.  View your choice in the preview box. If you like the scheme, select “Apply”.  Create a custom color scheme:  From the “Item” list, select a display item.  From the “Basic colors” list, select a color, and select “OK”.  View your color selection(s) in the Preview box.  To save the scheme, select “Save”.  In the “Save this color scheme as” box, enter a name for the scheme, and select “OK”.  Select “Apply”. Figure 3-48 Display properties Figure 3-49 Display properties
3-38 Figure 3-50 Display properties Figure 3-51 Display properties Figure 3-52 Display properties 3.2.9 Input Panel Table 3-30 Display properties ICON ITEM & FUNCTION  “Input panel” Tab :( Figure 3-53)  Select the input method you want to change.  To change the Soft Keyboard Options , tap “Option” (Figure 3-54) .
3-39  “Options” Tab :  Change the soft keyboard options as desired, selecting from:  Large or small keys  Using gestures for space, black-space shift, and enter.  To exit the soft keyboard Options, press “OK” on the control bar, or press the <Enter> key on the keypad.  To exit the Input Panel, press “OK” on the control bar, or press the <Enter> key on the keypad. . Figure 3-53 Input Panel Properties Figure 3-54 Input Panel Properties 3.2.10 Internet Options Table 3-31 Internet Options ICON ITEM & FUNCTION  “General” Tab :( Figure 3-55)  Type in the URL of desired start page and the desired search engine. You also change the Cache Size, clear the Cache and Clear the History..  “Connection” Tab :( Figure 3-56)  Modify the network access setting as desired.
3-40  “Security” Tab (Figure 3-57)  Modify the security settings as desired. You can enable any of the following by tapping the checkbox:  Allow cookies  Allow TLS 1.0 security  Allow SSL 2.0 security  Allow SSL 3.0 security  Warm when switching across secure and insecure areas.  “Advanced” Tab (Figure 3-58)  Modify the security settings as desired. You can enable any of the following by tapping the checkbox:  Display Image in pages  Play sounds in pages  Enable scripting  Display a notification about every script error  Underline links- ○ Never ○ Always ○ Hover Figure 3-55 Internet Settings Figure 3-56 Internet Settings
3-41 Figure 3-57 Internet Settings Figure 3-58 Internet Settings 3.2.11 Keyboard Table 3-32 Keyboard ICON ITEM & FUNCTION  “Repeat” Tab :( Figure 3-59)  To change the amount of time between depressions before repetition starts, adjust the Repeat delay slider  To change the repeat rate, adjust the Repeat rate slider.  Test your new setting.  Tap “ OK” to exit the “Keyboard” Tab.
3-42 Figure 3-59 Keyboard Properties 3.2.12 Network and Dial-up Connections Table 3-33 Network and Dial-up Connections ICON ITEM & FUNCTION  “Connection” Tab :  To create a “Dial-up Connection”:  Double-tap the “Make New connection”.  In the “Make New Connection” dialog box, enter a name for the connection.  Select “Dial-Up Connection”.  Select the “Next” button.  Select the modem you want use.  Select “Configure”  Under “Connection Reference”, use the default settings provided. If you can’t connect using these settings, see your ISP or network administrator for specific information. If you want to always enter a phone number before connecting, Select “Manual Dial”. Select “OK”.
3-43  Select “TCP/IP Settings”. In the “General” tab, ensure “Use Server-assigned IP address” is selected. In the “Name Servers” tab, ensure “Use Server-assigned addresses” is selected, and select “OK”. If you are unable to connect with these default settings, see your ISP or network administrator for specific TCP/IP information.  Select the “Next” button and type the telephone number.  Select the “Finish” button. The connection you just created appears as an icon in the “Network and Dial-up Connections” folder.  Set up a point-to-Point Protocol(PPP) account with an ISP and obtain the following information:  Access telephone number  User name  Password Once you have established an account, create a new connection on your device. When creating this connection, you should be able to use all of the default TCP/IP settings provided in the Make New Connection Wizard. If you can’t connect using the default settings, contact your ISP or access your ISP’s Web site for specific TCP/IP information as well as primary and secondary DNS address.  Modify connection setting  Select Start > Settings > Network and Dialup Connections  Select the icon for connection settings you want to modify.  Select File > Properties, or double- tap the appropriate icon.  Select desired options. There may be additional settings that depend on the connection. To modify, select the icon and select the icon and select Advanced Settings… from the menu.
3-44 Figure 3-60 Network and Dial-up Connections Figure 3-61 Network and Dial-up Connections Figure 3-62 Network and Dial-up Connections Figure 3-63 Network and Dial-up Connections
3-45 Figure 3-64 Network and Dial-up Connections Figure 3-65 Network and Dial-up Connections Figure 3-66 Network and Dial-up Connections Figure 3-67 Network and Dial-up Connections
3-46 Figure 3-68 Network and Dial-up Connections Figure 3-69 Network and Dial-up Connections Figure 3-70 Network and Dial-up Connections Figure 3-71 Network and Dial-up Connections 3.2.13 Owner Table 3-35 Owner ICON ITEM & FUNCTION  “Identification” Tab : (Figure 3-72)
3-47  Fill in or edit the data as desired.  To have this information displayed when you start your device, select “Display Owner Identification” at Power On.  To set up identification for remote networks, see Setting up identification for remote networks.  “Network ID” Tab: (Figure 3-73)  Enter the user name, password, and domain name you use to log on to remote network. Figure 3-72 Owner Properties Figure 3-73 Owner Properties 3.2.14 Password Table 3-36 Password ICON ITEM & FUNCTION  “Password Setting” Tab : (Figure 3-74)  Enter the password  In the “Confirm password “box, enter the password again.  To require the password on startup, select “Enable password protection at power- on“. and/or select “Enable password protection for screen saver”  To exit the Password control panel, press “OK” from the control bar, or press the <Enter> key on the keypad.
3-48 Figure 3-74 Password Properties 3.2.15 PC Connection Table 3-37 PC Connection ICON ITEM & FUNCTION  “PC Connection” Tab : (Figure 3-75)  Select the first checkbox to enable direct connections to the desktop computer. (Figure 3-75)  Tap the “Change Connection…” button to modify the connection method from USB or Serial. (Figure 3-76)  To exit the “Change Connection” dialog, press “OK” from the control bar, or press the <Enter> key on the keypad.  To exit the “PC Connection” properties control panel, press “OK” from the control bar, or press the <Enter> key on the keypad.
3-49 Figure 3-75 PC Connection Figure 3-76 PC Connection 3.2.16 Power Table 3-38 Power ICON ITEM & FUNCTION  “Battery” Tab : (Figure 3-77)  Provide change level indicators for Main battery and Backup battery.  Provide remaining power capacity of main battery.  If a “Main Batteries very Low” warning message shows, the remaining battery life is around 30 minutes to SC700 shuts down. ( Figure 3-81)  The PDT will shutdown during the main batteries capacity is around 0%  To exit Battery control panel, press “OK” from the command bar, or press <Enter> key on keypad.  “ Schemes” Tab: (Figure 3-78)
3-50  The Scheme Tab allows you to determine the time to switch state to Suspend mode when using either Battery Power or AC Power.  Select Battery Power or AC Power as the power scheme from the pull-down list.( Figure 3-78)  Select the time to suspend mode from the pull-down list. ( Figure 3-79)  “Device Status” Tab: ( Figure 3-80) Provide power level of device – The power level ranges from “ High(D0)” which means the device is at the highest power level to “Off(D4)” which means the device is at the lowest power level. Note: This ICON inside the Task Bar shows that AC adapter provides power to the PDT The ICON inside the Task Bar shows that Main Batteries provides the power to the PDT. The ICON inside the Task Bar shows that AC adapter provides the power to the PDT and is charging the main batteries.. Figure 3-77 Power Figure 3-78 Power
3-51 Figure 3-79 Power Figure 3-80 Power Figure 3-81 Power 3.2.17 Regional Settings Table 3-39 Regional Settings ICON ITEM & FUNCTION  “Region” Tab : (Figure 3-82)  Select the desired location/language.  Review the Appearance samples in the bottom half of the screen.  Select the Tab at the top for any settings you wish to change, Options to modify include Number, Currency, Time, and Date.
3-52 Figure 3-82 Regional Settings 3.2.18 Remove Programs Table 3-40 Remove Programs ICON ITEM & FUNCTION  “Remove Programs” Tab :  Only user installed programs can be removed.  Select the program you wish to remove from the list and press “remove” button.
3-53 3.2.19 Storage Manager Table 3-41 Storage Manager ICON ITEM & FUNCTION  “Storage Manager” Tab : (Figure 3-83)  To change Storage properties control panel default settings: Insert. Compact Flash(CF) or Secure digital (SD) storage card into the unit.  Select Start > Settings > Control Panel > Storage Properties  From the “Storage Info” pull-down list, select the desired storage device.  You can also format, dismount, and create partitions on storage devices using this control panel.  To save and exit the Storage Properties control panel, press “OK” from the control bar, or press the <Enter> key on the keypad. Caution: Dismounting or formatting the DiskOnChip will erase all files and program stored in Flash Memory Figure 3-83 Storage Manager
3-54 3.2.20 Stylus Table 3-42 Stylus ICON ITEM & FUNCTION  “Double-Tap” Tab : (Figure 3-84,Figure 3-85)  Double-tap the checkerboard grip at a comfortable speed.  Double-tap clapboard to test your settings  The function is OK if the figures are changed from Figure 3-84 to Figure 3-85.  To tap “OK” to exit the Stylus Properties.  “Calibration”: (Figure 3-86, Figure 3-87)  In the Welcome Wizard, you tapped a target with the stylus to set the amount of pressure needed for the screen to respond to your stylus taps.  Please also see 2.4.3 Calibration of the touch Screen Figure 3-84 Stylus Properties Figure 3-85 Stylus Properties
3-55 Figure 3-86 Stylus Properties Figure 3-87 Stylus Properties 3.2.21 System Table 3-43 System ICON ITEM & FUNCTION  “General” Tab : (Figure 3-88)  To show:  Firmware information  Information about Processor type, Memory size, Expansion card  “Memory”: (Figure 3-89)  Move the slider to adjust memory allocation. Default storage memory is normally is normally set to about 8MB with the reminder assigned to Program memory.  Press the “OK” key on the Keypad. Note: the difference is occupied by OS between the RAM size in Information properties and total memory size of storage memory and program memory  “Device Name” Tab : (Figure 3-90)  Your device uses this information to identify itself to other computers.  The input panel will open to facilitate data entry.
3-56  To close the Device Name, press the “OK” button, or press the <Enter> key on keypad.  “Copyrights” Tab: (Figure3-91)  Refer to this tab for specific copyright data. As a user, you are responsible to read this statement. Figure 3-88 System Properties Figure 3-89 System Properties Figure 3-90 System Properties Figure 3-91 System Properties
3-57 3.2.22 Volume & Sounds Properties Table 3-44 Volume & Sound ICON ITEM & FUNCTION  “Volume” Tab : (Figure 3-92)  The factory default for Volume is the forth level. You can adjust the volume to your environment and comfort.  Set the volume by adjusting the slider from Soft to Loud, or press Right or Left edge of Navigation keys  “Sounds ” Tab: (Figure3-93)  Enable the desired sounds for key clicks, screen taps, notifications, and applications. Figure 3-92 Volume & Sound Figure 3-93 Volume & Sound
3-58 3.3 Taskbar and Start Menu Table 3-45 Taskbar and Start menu ICON ITEM & FUNCTION  “General” Tab :  In this tab, You can change the position of the Taskbar and Start menu  Is always on top or not  Auto hide or not  Show Clock or not  “Advanced ” Tab: Taskbar and Start Menu  Tap the “Clear” button to remove the contents of the Documents Menu.  Enable “□□□□ Expand Control Panel”””” to list all icons of Control Panel from top to bottom.
4-1 Chapter 4. Communication 4.1 Installing & Setting Up Microsoft ActiveSync 4.1.1 Installing Microsoft ActiveSync on the Host PC Microsoft ActiveSync is a file transfer tool to synchronize the files on a PC with the files on your PDT. To install Microsoft ActiveSync, complete the following steps on the PC: 1. Go to the Microsoft Windows CE.NET website and download the latest current version of ActiveSync: http://www.microsoft.com/mobile/pockeypc/downloads/ . 2. Install the latest version of Microsoft ActiveSync on the host PC. 3. Open ActiveSync. 4. Select File > Communication Settings from AtiveSync’s menu bar. 5. Go to “Using ActiveSync” on page 4-1 to continue using ActiveSync. 4.1.2 Connecting PDT to Host PC 1. You can use either the USB/Serial (RS232) port of Single Dock or a USB/Serial (RS232) cable to connect the PDT to the Host PC.  To use the dock, you must first insert the PDT into the slot, making sure that the unit is firmly seated the dock.  To use the cable, connect the USB/Serial cable to the PDT. 2. Connect the USB/Serial dock or cable to the Host PC’s serial port or USB port. 3. Connect the dock or PDT to the power adapter and power source. 4.2 Using ActiveSync Use ActiveSync to transfer and synchronize files between the PDT and the Host PC. 4.2.1 Setting up a Partnership During the Microsoft ActiveSync installation, you were prompted to create a partnership with your mobile device. When you set up a partnership, you select synchronization and file conversation settings, which are contained in a file on your desktop computer. This file enables your desktop computer to recognize your device.
4-2 Only devices that have a partnership with a desktop computer can synchronize information between the two computers. For more information on partnerships, please refer to your Microsoft ActiveSync documentation or help file. Transferring Files: To transfer files, complete the following steps on the host PC:  Select Start> Programs >Communication > (Serial, or USB) Activesync.  Double-click on the selected ActiveSync icon  After you have established a connection with PDT, tap the “Explore” button at the top of the ActiveSync window (or select Explore from the File menu).  Navigate to the target directory on your PDT and copy the desired file by using the Copy/paste method or dragging and dropping the desired file(s) into the folder. Figure 4-1 Communication

Navigation menu