ShenZhen Jumper Medical Equipment JPDTH100 Wireless Intelligent Thermoment User Manual

ShenZhen Jumper Medical Equipment Co.,Ltd Wireless Intelligent Thermoment Users Manual

Users Manual

UserManualWirelessIntelligentThermometerModel:JPD-TH100Date of Issue: Mar. 10, 2017, Version: A/0Technical SpecificaonsCleaning & Disinfecng Care & MaintenanceTroubleshoongPower supply mode Internal power sourceType B applied partsCR 2032 buon baeryDC3.0VDiameter:33mm; Height: 8.5mm8.5g2 years, producon dateonthelabel.32.0°C ~42.0°C/89.6℉ ~107.6℉±0.1°C/±0.2°F10m ClassificaonBaery specificaonWorking voltageDimensionsWeightService lifeTemperature rangeMeasurement accuracyTransmission distanceOperang environmentTransportaon & storage environment 5°C~40°C; ≤80% RH; 70kpa ~ 106kpa-20°C~55°C; 10% RH~93% RH; 50kpa ~ 106kpaStore in well-venlated room without aggressive gas. (Notes: Do not soak intelligent thermometer in liquid for cleaning or disinfecng. Do not allow liquid to penetrate the intelligent thermometer.) Cleaning: Wet the clean so cloth with a small amount of water or mild detergent, wring it out and wipe the dirty parts or the sensing parts. Acid detergent or alkaline detergent is prohibited to use. Disinfecng: Wet the clean so cloth with a small amount of medicinal alcohol (concentraon: 75%), wipe the intelligent thermometer and the sensing parts before and aer use. Put the intelligent thermometer in clean storage box and store the box in well-venlated and dry place aer use. Take out the buon baeries of intelligent thermometer if it want be used for a long me. In order to avoid the damages on parts, prevent the intelligent thermometer from falling off and violently crashing during use. Do not clean the intelligent thermometer with acetone, gasoline and other strong solvents. Problem Fail to connect to smartphonePossible reason Soluon A. The buon baery is run out of power; B. The baery is inserted in wrong poles.A. Replace the baery. B. Insert the baery based on the right poles. Shenzhen Jumper Medical Equipment Co.,Ltd.EC REP Wellkang LtdSuite B, 29 Harley Street, London W1G 9QR,UKD Building, No. 71, Xintian Road, Fuyong Street, Baoan,Shenzhen, Guangdong, China.Tel: +86-755-26696279 Fax: +86-755-26852025Website: hp://www.jumper-medical.comFrequency Range 2402-2480MHzMax.RF power -1.9dBmRF Exposure Informaon and Statement :This equipment complies with FCC RF radiaon exposure limits set forth for an uncontrolled environment.This device complies with part 15 of the FCC rules Operaon is subject to the following two condions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operaon. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modificaons to this equipment. Such modificaons could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separaon between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help- This device and its antenna(s) must not be co-located or operang in conjuncon with any other antenna or transmier.
Android iosPackage contentsIntended UseProducon Introducon Connect to Mobile PhoneWarningComponentsApplicaon1. Download an APP (scan the QR code on the right.) For avoiding environmental polluon, please properly treat the old baery The Intelligent Thermometer composes of the main circuit, temperature sensing parts, buon baery, shell and app in smart phone.The Intelligent Thermometer can measure the temperature on the surface of people’s chest, and display the results on app of smart phone through Bluetooth.Precauons Please do not disassemble the Intelligent Thermometer except for replacing the baery. Do not use the Intelligent Thermometer in places with strong electromagnec field; otherwise, the Bluetooth signal may be interfered. Keep the body sll during measurement. Wipe the Intelligent Thermometer and its temperature sensing parts with medical alcohol for disinfecng before and aer the measurement. Put the Intelligent Thermometer in clean storage box and store the box in well- venlated and dry place aer use. Please do not wash the Intelligent Thermometer with water or other liquids. aer replacement. In order to avoid the risk of choking, please keep the Intelligent Thermometer and buon baery out of the reach of children, immediately send the children that swallow either of them to hospital. It is dangerous to diagnose the illness state by yourself based on the measurement results. Please consult the doctor if you have any concern. Only measure the temperature of children under adult supervision. Please do not use the Intelligent Thermometer for other purposes. Only use the Intelligent Thermometer to measure the temperature of chest instead of other posions (e.g. forehead, mouth, ears). 1. Flip the cover upwards with thumb fingernail to open the cover. 2. Take the old buon baery out and insert a new one with posive pole upwards. 3. Align the notches of cover and baery box, and close the cover. 2. Start soware and connect to Intelligent Thermometer Open Bluetooth in smart phone, start app, scan the QR code on Intelligent Thermometer and connect to a smartphone. (Notes: The Intelligent Thermometer has no switch, so it is started up aer the buon baery is installed. The Bluetooth is in sleeping mode aer being disconnected from smart phone.)Replace BaeryWearing & Using 1. Open the package. 2. Take buon baery out, open the cover of Intelligent Thermometer, and install the baery. 3. Scan QR code with a smartphone to download an App.  4. Take a piece of medical adhesive tape and sck the Intelligent Thermometer on chest. 5. Turn on the Bluetooth for your smartphone, start app, scan the QR code on Intelligent Thermometer and enter into temperature measurement interface. 6. Measure temperature, and update the result every 2 seconds. Wireless Intelligent Thermometer is a wearable and intelligent device that measures body temperature, which can quickly and accurately measure the body temperature via its medical temperature sensing parts on the boom.The user scks the Intelligent Thermometer on chest with medical proof fabric and starts app on smart phone to view the measurement results at any me. Featuring small size, skin-friendly boom and safe material without toxicant and anaphylacc reacon, the Intelligent Thermometer can be worn for 24 hours. The Intelligent Thermometer is used for measuring people’s body temperature at home or in medical instuons.AdvantagesSafe & accurate: Medical materials with high measurement accuracy; Skin-friendly: Small size and skin-friendly design; Economic & convenient: Replaceable buon baery and reusable Intelligent Thermometer; Low power consumpon: Switch-free design and low power consumpon Bluetooth; Convenient measurement: 24-hour monitoring and data viewing in app. Wireless Intelligent thermometer x 1 Buon baery x 1 Medical proof fabric x 1 User manual x 1Symbol DescriponIP20Cauon, consult the instrucons for use.Type CF applied parts Waste electrical materials should be sent to a dedicated collecon point for recycling.The degree of protecon against harmful ingress of water and parculate maerSymbol & Descripon Warning: Please installing the baery correctly, or the instrument will be damaged.Regulatory Conformance （RED）Hereby, Shenzhen Jumper Medical Equipment Co.,Ltd declares that the radio equipment type JPD-TH100 is in compliance with Direcve 2014/53/EU. The full text of the EU declaraon of conformity is available at the following website:hp://www.jumper-medical.com

Navigation menu