Shen Zhen MTC 58658641 LED TV User Manual MUAV6550Y 65864

Shen Zhen MTC Co., LTD LED TV MUAV6550Y 65864

UserManual.wiki >

Shen Zhen MTC >

58658641 User Manual

Users Manual

USER MANUALMUAV01-65864 Please read this User Manual carefully to ensure use of this product and keep this manual for future referenceLED TV

Contents Safety and warnings......................................................................................1-3 Introduction................................................................................... ..............4 Installation...................................................................................................5-8 ...................................................................................................9 General Description............................................................................ ..........10-13 External Connection......................................................................................14-17 Basic Operations...........................................................................................18-19 Menu System Instruction................................................................................20-37 Digital Media Player.......................................................................................38 Trouble Shooting...........................................................................................39-40 Reference.....................................................................................................41 Wall Mount

-1-SAFETY AND WARNINGSIMPORTANT SAFETY INSTRUCTIONTO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.RISK OF ELECTRIC SHOCK DO NOT OPEN!CAUTIONCAUTIONThe symbol indicates that dangerous voltages constituting a risk of electric shock are present within this unit.The symbol indicates that there are important operating and maintenance instructions in the literaturaccompanying this unit.To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.WARNING:1) Read these instructions.2) Keep these instructions.3) Heed all warnings.4) Follow all instructions.5) Do not use this apparatus near water.6) Clean only with dry cloth.7) Do not block any ventilation openings, install in accordance with the instructions.8) Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9) Do not defeat the safety purpose of the polarized plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10) Protected the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11) Only use attachments/accessories specified by the manufacturer.12) Unplug this apparatus during lighting storms or when unused for long periods of time.13) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.14) Mains plug is used as the disconnect device, the disconnect device shall remain readily operable.15) The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloth, curtains, etc.16) No naked flame sources, such as lighted candles, should be placed on the apparatus.17) Attention should be drawn to the environmental aspects of battery disposal.18) The use of apparatus in moderate climate.19) The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.Warning: To avoid any injury caused by lean of the product, please always ensure the whole product was placed within the table surface in horizontal. The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.WARNING:WARNINGNever place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simpleprecautions such as:– Using cabinets or stands recommended by the manufacturer of the television set.– Only using furniture that can safely support the television set.– Ensuring the television set is not overhanging the edge of the supporting furniture.– Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.– Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture.– Educating children about the dangers of climbing on furniture to reach the television set or its controls.If your existing television set is being retained and relocated, the same considerations as aboveshould be applied.

SAFETY AND WARNINGSStep one: Use the expansion bolts(4*36PWA) to fix the wall mount brackets into the wallStep Two: Fix the wall mount screws (M6x8mm/4pcs) into the rear side of the LCD TV,using the tongue of 8kgf.cm.* The TV appearance subject to material object. Step Three: Put the LCD TV with wall mount screws onto the wall mount brackets.Warning: the angle between the TV and wall must not be bigger than 3º.This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement parts.This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: o Reorient or relocate the receiving antenna.o Increase the separation between the equipment and receiver.o Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.

SAFETY AND WARNINGSIMPORTANT SAFETY INSTRUCTIONSThe symbol indicates that dangerous voltages constituting a risk of electric shock are present within this unit.The symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.WARNING:Important Safety Instructions1) Read these instructions.2) Keep these instructions.3) Heed all warnings.4) Follow all instructions.5) Do not use this apparatus near water.6) Clean only with dry cloth.7) Do not block any ventilation openings, install in accordance with the instructions.8) Do not install near any heat sources such as, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9) Do not defeat the safety purpose of the polarized plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10) the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11) Only use attachments/accessories specified by the manufacturer.12) Unplug this apparatus during lighting storms or when unused for long periods of time.13) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.14) Mains plug is used as the disconnect device, the disconnect device shall remain readily operable.15) Do not the ventilation openings with items such as newspapers, table-cloth, curtains, etc.16) No naked flame sources, such as lighted candles, should be placed on the apparatus.17) Attention should be drawn to the environmental aspects of battery disposal.18) apparatus in moderate climate.19) The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.20) Use only with a cart , stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.non abrasive radiatorsProtectwhencoverUseThe batteries shall not be exposed to excessive heat such as, fire or the like.WARNING:The excessive sound pressure from earphones and headphones can cause hearing loss. WARNING: This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement parts.This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.-2-

SAFETY AND WARNINGS High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel. To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture. Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver. Do not block the ventilation holes in the back cover. Adequate ventilation is essential to prevent failure of electrical components. Do not trap the power supply cord under the television receiver. Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it falls. Do not place your television on an unstable cart, stand, shelf or table. Serious injury to an individual , and damage to the television, may result if it falls. Recommended to utilize rear mount screw holes for anti-tipping (hardware not included). When the television receiver is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet. Avoid exposing the television receiver to direct sunlight and other sources of heat. Do not stand the television receiver directly on other products which give off heat, e.g. video cassette players and audio amplifiers. Do not place naked flame sources, such as lighted candles on the television. Dim:515*320mm(不包括底座） If the television is to be built into a compartment or similar enclosure, the minimum distances must be maintained. Heat build-up can reduce the service life of your television, and can also be dangerous.-3-

INSTALLATIONFront panelREAR ConnectionsSIDE ConnectionsAll the terminals are(from left to right): HEADPHONE, COAXIAL, LAN, HDMI3, HDMI2, RF. VIDEO L ROPTICALAll the terminals are (from left to right):, USB2.0, VIDEO/YPbPr, AUDIO. HDMI1(ARC) 1: Remote control sensor. 2: Indicator LED: RED STANDBY. 3: Key board 321≤8mBottom1. Middle Button: press longtime for “power” function; 2. Up/Down: CH+/-3. Left/Righ: VOL-/+press once for “source” functionThe keyboard is located at the bottom left near the right side of signal indicator.KEYBOARDRockerHDMI3 HDMI2HEADPHONE COAXIAL LAN RFHDMI1(ARC) USB2.0 USB2.0 V/YPbPr AUDIO0789456123VOL CHMTS/AUDIOCC/SUBTITLETTSCH EXITOKINFOPICTURESOUNDASPECT-5-

INSTALLATIONAntenna PRESET MODE (HDMI)123800*6001024*768606037.8848.36RESOLUTION V.Freq.(Hz) H.Freq.(KHz)1366*768 60 47.741280*768 60 47.351920*108060 67.563840*2160 30 67.5750 112.5860 1353840*21603840*2160CABLE When shipped from the factory, the Signal Type option is for the RF connector (F-type) set to the"AIR" (Over-the air antenna) mode.Power connectionPlease note: After unpacking, allow the TV to reach ambient room temperature before connection the TV to the mains power socket.Connect the power cord plug to the mains power socket.OUTDOOR OR INDOOR ANTENNANote:Aerial connections:F connector.Input impendance:75 unbalanced.PLUG75Ω CABLEANTENNA OR CABLE TVADAPTER (NOT SUPPLIED)TWIN-LEADER FEEDER (300Ω)OUTDOOR OR INDOOR ANTENNA(NOT SUPPLIED)-6-

Prepare to place the TV with the display side down on a flat surface. Due to the size and weight of this TV, the use of 2 people is recommended when moving it. Ensure the table or desk you use provides a flat, totally clean surface, and use a soft cloth between the face of the TV and the table to protect the TV's screen. 1. Locate the 2PCS of the base stand and the gap in the bottom of the TV , and check that it is securely held in place as per a) below.2.Lock in the designated location as per b) below and check each screw is firmlytightened insert it into4 screwsINSTALLATIONBase Stand Assembly InstructionThe base standb)a)4 x Screws( )M4X14MM-7-

INSTALLATIONAV EquipmentYou can use the input terminals as follows.rearVideo Equipments: VCR, Multi Disc Player, DVD Player, Camcorder, Video Game, etc.Video format that YPbPr supports: 480i, 576i, 480p, 720p, 1080i, 1080p, 2160p.HDMIVIDEO EQUIPMENT with YPbPrGBRGBRGBRHDMI1(ARC) USB2.0 USB2.0 V/YPbPr AUDIOHDMI3 HDMI2HEADPHONE COAXIAL LAN RFHDMI-8-1WA N234WRWRWR

Wall MountInstruction for Wall MountDimensions for Mounting Hole Pattern A wall mount kit (purchased separately) would allow you to mount your JVCTV on the wall. For detailed information on installing the wall mount, refer to the instructions provided by the wall mount manufacturer. It is strongly recommended to contact a technician for professional assistance for wall mount installation. is not responsible for any damagJVC e to the product or injury to yourself or others resulting from the wall-mounting.20020064.3This TV is compatible with a mounting hole pattern.JVC 200mm x 200mm- Do not mount your TV at more than a 15 degree tilt.JVC-Always use two people to mount the TV to a wall.- Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.- 4 pcs of type M6 screws are required for installing the wall mount bracket to your TV. Do not use screws that are longer than 10 mm. Screws that JVC are too long may cause damag e to the inside of the TV set.- Do not fasten the screws too tight for this may damage the TV or cause the TV to fall, resulting in personal injury. is not liable for these kinds of JVC incidents.-9-

0789456123VOL CHMTS/AUDIOCC/SUBTITLETTSCH EXITOKINFOPICTURESOUNDASPECTOverview of remote controlGeneral DescriptionLoading batteries:1) Remove the lid of the battery compartment. 2) Insert 2 size AAA batteries with polarities as indicated inside the compartment. 3) Replace the lid.Note:1) A loading of batteries should be last one year under normal use.2) If you don't intend to use the remote control for a long period of time, remove batteries to avoid damage due to leakage.3) Do not mix old and new batteries or different types.4) Do not throw batteries into fire or water.5) The batteries (battery pack or batteries installed) should not be exposed to excessive heat such as sunshine, fire or the like. -10-

0789456123VOL CHMTS/AUDIOCC/SUBTITLETTSCH EXITOKINFOPICTURESOUNDASPECT1. POWER: Turn the TV on and off.2. MUTE: Press this button to cut off the sound of the TV set temporarily, press again to resume. 3. Digital Buttons(0-9, -): Directly select channel with digital buttons.4. CH : Switch to the previous program.5. YouTube: If network connects, press this key to view YouTube directly.6. VUDU: Press it to show channel list and favorite list on screen.7. : Press it to go to App home page.8. NETFLIX: If network connects, press this key to view NETFLIX directly.9. INFO: Display the program information : Display the main menu or exit the current menu.11. OK: Validation key.12. Arrow button : Use to select on-screen menu items and change menu values.13. : Return. 14. EXIT: Exit the menu.15. COLOR It's used as it's showed in the EPG or Program Edit menu.16. : This button is used to switch among different sources, Select a source and press OK button to confirm .10. s pqtuBUTTONS: General DescriptionOverview of remote control-11-

0789456123VOL CHMTS/AUDIOCC/SUBTITLETTSCH EXITOKINFOPICTURESOUNDASPECTICTURE icture mode17. P: Select p . 18. VOL -: Press these buttons to adjust the volume. 19. CH : 20. DIGITAL MEDIA PLAYER CONTROL BUTTON: Include play/pause, stop, backward, forward is used in USB mode . Please refer to relevnat instructions in the section of multimed player. 21. CC/SUBTITLE: MTS/AUDIO: In USB mode, press this button to switch audio track when movie is playing. In TV mode, press this button to switch MTS or Audio Language.23. ASPECT: Press this button to set aspect, such as 16:9,4:3,native,ect. 24. TTS: Press this button to set TTS on or off.25. SOUND: Press this button to select sound mode. +/˄/˅ Press these buttons to change channel upward or downward.In USB mode, press this button to switch subtitles when movie is playing.22. General DescriptionOverview of remote control-12-

Installing Batteries in the Remote ControlGeneral DescriptionAntenna connectionAntenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be connected to the antenna jack directly, if the antenna cable is 300ohm parallel flat feeder cable, you need to use the 300ohm/75ohm converter to connect the antenna cable to the antenna jack. For details Please refer to the following drawing.Use a 75ohm - 300ohm converter300ohm coaxial cableAntenna feederANT IN75ohm coaxial cableAntenna cableAntennas with 300 W flat twins Leads Antennas with 75 W Round LeadsExternal ConnectionThe batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.Installing Batteries1Open the battery compartment cover on the back side.2Insert two 1.5V AAA size batteries incorrect polarity. Don´t mix old or usedbatteries with new ones.3Closed the cover.Point the remote towards the remote control sensor of the TV and use it within 8 meters.Put the used batteries into the recyc-ling bin since they can negatively affect the environment.

External ConnectionConnecting VCRThese instructions assume that you have already connected your TV to an antenna or a cable TV system. Skip step 1 if you have not yet connected to an antenna or a cable system. VCR Rear PanelTV Rear PanelWhiteRedANT ANT OUT S-VIDEO AUDIO OUTRedBlueGreenVIDEO OUT231213Audio Cable (Not supplied)YPbPr cable( supplied) Not RF Cable (Not supplied)Follow the instructions in Viewing a VCR or Camcorder Tape to view your VCR tape. Each VCR has a different back panel configuration. When connecting a VCR, match the color of the connection terminal to the cable. 1. Unplug the cable or antenna from the back of the TV.2. Connect the cable or antenna to the ANT IN terminal on the back of the VCR.3. Connect an RF Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV.4. Connect a Component Cable between the COMPONENT [Y, Pb, Pr] jacks on the DVD player and YPbPr jack on the TV. 5. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AUDIO L and AUDIO R jacks on the TV.Note: 1. Whenever you connect an external device to your TV, make sure that power on the unit is turned off. 2. When connecting an external device, match the color of the connection terminal to the cable.PbPrY/V LRV/YPbPrAUDIO RedBlueGreenRedWhite231-14-HDMI3 HDMI2HEADPHONE COAXIAL LAN RF

External ConnectionConnecting a CamcorderThe rear panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR.Each Camcorder has a different back panel configuration. When connecting a Camcorder or DVD, match the color of the connection terminal to the cable.VideoGreen1. Connect a Video Cable between the AV VIDEO in jacks on the TV and the VIDEO OUT jack on the camcorder.2. Connect Audio Cables between the AUDIO L and AUDIO R jacks on the TV and the AUDIO OUT jacks on the camcorder.3. Connect a Video Cable between the AV VIDEO IN jacks on the TV and the VIDEO OUT jack on the DVD.4. Connect Audio Cables between the component IN AUDIO L and R jacks on the TV and the AUDIO OUT jack on the DVD.Notes: 1. Whenever you connect an external device to your TV, make sure that power on the unit is turned off. 2. When connecting an external device, match the color of the connection terminal to the cable.WhiteRedCamcorderVideo Cable (Not supplied)1Audio Cable (Not supplied)2PbPrY/V LRV/YPbPrAUDIO GreenRedWhite-15-

External ConnectionConnecting Digital Audio SystemThis connection can only be made if there is a HDMI Output connector on the external device. HDMI Cable (Not supplied)What is HDMI? HDMI, or high-definition multimedia interface, is a next-generation interface that enables the transmission of digital audio and video signals using a single cable without compression.Multimedia interface is a more accurate name for it especially because it allows multiple channels of digital audio (5.1 channels). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP(High Bandwidth Digital Copy Protection) coding feature installed, and supports multi-channel digital audio. Each DVD player/STB has a different back panel configuration.Connect an HDMI Cable between the HDMI1, HDMI2, HDMI3 connector on the TV and the HDMI connector on the DVD player/Set-Top Box.Notes: 1.Whenever you connect an external device to your TV, make sure that power on the unit is turned off. 2.When connecting an external device, match the color of the connection terminal to the cable.-16-HDMI3 HDMI2HEADPHONE COAXIAL LAN RF

Connecting PCExternal ConnectionSupporing SignalsInput ModeDigitalAnalogATSCCVBS PAL/NTSCPAL-M/PAL-N/NTSC MThe rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.5.1 CH audio is possible when the TV is connected to an external device supporting 5.1 CH. Connect an OPTICAL Cable between the OPTICAL jacks on the TV and the Digital Audio Input jacks on the Digital Audio System. When a Digital Audio System is connected to the OPTICAL terminal: Decrease the gain (volume) of the TV, and adjust the volume level with the volume control.Digital Audio System'sDigital Audio System(Black)TV Rear PanelCOAXIALResolutionInputComponent60Hz60Hz50Hz/60Hz480i480p720p50Hz/60Hz1080iHDMI 50Hz/60Hz50Hz/60Hz480p720p60Hz1080iVertical Frequency50Hz/60Hz1080p50Hz/60Hz1080p3840x2160 24Hz/25Hz/30Hz/60Hz-17-HDMI3 HDMI2HEADPHONE COAXIAL LAN RF(Not included)

Basic OperationsMenu Operation1 Input SetupPress key on the remote control to enter "INPUT SOURCE" menu. There arethese options for you to select: "TV", "AV","Component", "HDMI1", “HDMI2", “HDMI3", “USB".Use t/ukey to select a input source and press OK key to confirm.2 Channels SelectionThere are four ways to select channel:1) Using number keys, and OK keys on the remote control to select channel directly. To select channel 90, press . When you use the number buttons, you can directly select channels that were either erased or not memorized.2) Using CHr/s key on the remote control or on your TV to select channel. When you press the CHr/s key, the TV changes channels in sequence. You will see all the channels that the TV has memorized. You will not see channels that were either erased or not memorized. 3) Press CH key to return to previous channel, press it again to return to current channel. To quickly switch between two channels that are far apart, tune to one channel, then use the number keys to select the second channel. Then use the CH button to quickly alternate between them. CH is not activated if no channel has been changed after TV turning on.4) Select channels from "Channels List" or "Favorite List".Press OK key to choose from "Channel List" menu.3 Volume Adjustment and Mute SetupVolume adjustmentPress VOLr/s key on the remote control or the TV to display "Volume" menu, adjust the volume of TV between 0 to 100 by using VOLr/skey: Input Source90OKHDMI 2AV Component HDMI 1Input SourceTV AV Component HDMI 2 HDMI 3Input SourceHDMI 3 USBUSBHDMI 1-18-

Basic OperationsMenu Operation4 Current Channel InformationPress “INFO” key on the remote control to view current channel information, the indications of channel information are listed in the following table.Press “EXIT” key on the remote control to exit this OSD.00:00 01/01/1970( To increase the volume, press VOLr key;( To decrease the volume, press VOLs key;Mute Press “ ” and the sound cuts off. The MUTE icon will appear in the lower-left corner of the screen.To resume sound, press the “ ” button again, or simply press the VOLr key.Mute-19-

Picture ModeComtrast 70BrightnessColorSharpnessTintBacklightColor Temperature 50 70 0100201. Press key to display the main menu on the screen.2. Press p/q key to select "Picture" option. 3. Press u key to enter "Picture" submenu. 4. You can also press the PICTURE key on the remote control to select one of the picture settings.Picture ModeYour TV has four picture settings (Sports, Normal,Mild,Save, User) that are preset at the factory. Only "User" mode can be set to your preference by adjusting particular items such as Contrast, Brightness, Color, Sharpness.1. Press p/q key to select "Picture Mode" option. 2. Press p/q key to select one picture mode.User settings for PICTURE (Contrast, Brightness, Color, Sharpness,Tint)Your set has several settings which allow you to control picture quality.1. Press ▲/▼ key to select a particular item. 2. Press t/u key to decrease or increase the value of a particular item. Note: The adjusted values are stored according to the selected particular item. BacklightYou can Change the brightness of the entire screen according to your preference.1. Press p/q key to select "Backlight" option. 2. Presst/u key to increace or decreace the backlight value.Color TemperatureYou can change the color of the entire screen according to your preference.1. Press p/q key to select "Color Temperature" option. 2. Press p/q key to select one color temp. Contrast: Adjusts the lightness and darkness between objects and the background.Brightness: Adjusts the brightness of the picture.Color: Adjusts the colors, making them lighter or darker.Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.Tint: Adjusts the Tint of the picture. Backlight: Adjusts the brightness of the whole screen. PictureMenu system instructionCool: Makes whites bluish.Standard: Makes whites nature Warm: Makes whites reddish.PictureSoundFunctionTimeOptionsParent ControlChannel-20-

1. Press key to display the main menu on the screen.2. Press p/q key to select "Sound" option.3. Press u key to enter "Sound" submenu. 4. You can also press the SOUND key on the remote control to select one of the sound.Sound ModeYou can select the type of the special sound effect to be used when watching a given broadcast.Your TV has five sound settings (“Standard”, “Music”,“Movie”, “Sports”,“User”) that are preset at the factory. 1. Press p/q key to select "Sound Mode" option. 2. Press p/q key to select one sound mode. EqualizerOnly can be adjusted in User mode.1. Press p/q key to select “Equalizer" option.2. Press t/u key to decrease or increase the value of the item. BalanceIf the volumes of the left speaker and the right speaker are not the same, you can adjust the "Balance" to suit your personal preference.1. Press p/q key to select "Balance" option.2. Press t/u key to decrease or increase the value of the item. AVLEach broadcasting station has its own signal conditions, and it is inconvenient to adjust the volume every time the channel is changed. “AVL” automatically adjusts the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output whenthe modulation signal is low.1. Press p/q key to select “AVL” option. 2. Press p/q key to select “On” or “Off”.1. Press p/q key to select "Surround sound” option. 2. Press p/q key to select “Surround” or “Off”.Video Description1. Press p/q key to select "Video Description” option. 2. Press p/q key to select “On” or “Off”.Surround soundThis is used to turn on surround sound to gain better sound effect.SoundMenu system instructionl Standard: Selects the normal sound mode.l Music: Provides clear and live sound for music.l Movie: Provides live and full sound for movies.l Sports: Emphasizes bass over other sounds.l User: Selects your custom sound settings. Sound ModeEqualizer BalanceAVLSurround SoundDigital Audio OutputAudio LanguageDAPHDMI ARC 0Video Description-21-

Menu system instructionSOUNDThis is used to .This is used to DAP. Digital Audio Output set digital audio output1. Press p/q key to select "Digital Audio Output” option. 2. Press p/q key to select “Auto” or “PCM”.Audio LanguageYou can set the first and secondary language for audio.DAP set 1. Press p/q key to select "DAP” option. 2. Press key to enter “DAP” submenu.HDMI ARCTurn on or turn off the HDMI ARC function.1. Press key to display the main menu on the screen.2. Press p/q key to select “Function” option.3. Press key to enter “Function” submenu.Noise Reduction Press p/q key to select the Noise Reduction mode. You can select the right mode to match the pictures. MPEG Noise Reduction Press key to select the mode: off/low/middle/high. The picturewill be better when it is in “high” mode.Aspect Ratio1. Press p/q key to select “Aspect Ratio” option. 2. Press p/q key to change the size of the picture on the size of the picture on the screen. u u t/u FunctionNoise ReductionMPEG Noise Reduction Aspect RatioCEC Link SetupHDMI EDIDNetflix Deactive Netflix ESNNetflix VersionVUDU DeactivationTTSDAPDAP EnableDAP ModeSurround VirtualizerDialog EnhancerAuto Volume ControlOffStandardHighLowOff-22-

CEC Link SetupEnable CEC linkAuto Power OnAuto StandbyOnOffOffMenu system instructionFunctionDTViTurn on/off ginga functionCEC Link Setup1. Press p/q key to select “Link Setup” option.2. Press OK or ukey to enter “Link Setup” submenu.Enable Link: Press t/u to turn on/off the link setup.Auto Power On: When this option is “On” and the TV is in standby mode. To turn on the DVD can also turn the TV at the same time.Auto Standby: When this Option is “On” and the TV is on, to turn off TV can also turn the DVD into standby mode. HDMI EDID This function is only used in HDMI mode.1. Press p/q key to select “ HDMI EDID” option.2. Press p/q key to select “ 4K” or “ 2K”.Netflix Deactive 1. Press “p/q" key to select “Netflix Deactive" option.2. Press “u” or "OK" key to confirm.3. Press "Yes" to confirm again, the Netflix will be activated.Netflix ESNDisplay the Netflix Esn information.Netflix VersionDisplay the Netflix version.-23-

Off Time On Time Sleep TimerAuto SleepAuto SyncClock --:--Time Zone 1. Press key to display the main menu on the screen.2. Press p/q key to select "Time" option.3. Press u key to enter "Time" submenu. OK OKSleep Timer1. Press p/q key to select "Sleep Timer" option.2. Press p/q key repeatedly until the desired time appears (Off, 10mins, 20mins, 30mins, 60mins, 90mins, 120mins, 180mins, 240mins).Notes: The sleep timer you have set will be cancelled when the TV turns off or if a power failure occurs.Press p/q key to select whether to open the Nosignal Power off features. If this function is opened, the TV will power off in ten minutes when there is no signal.When Auto Sync is on, the clock is got from DTV streams; Set the clock when Auto Sync is off.1. Press p/q key to select "Time Zone" option.2. Press p/q key to select time zone. Off TimeIn "Off Time” item, press ubutton or button to enter the submenu, set the day & time to turn off the TV set. On Time In "On Time” item, press ubutton or button to enter the submenu, set the time to turn on the TV set, when the TV set is in the standby mode. You can also choose which day to control you TV set in a week. Notes: When the time is less than 60 seconds, remind information will be displayed on the screen. Press any key button to cancel timer function.Auto SleepAuto SyncYou can modify the time of your TV set in Manual mode. In Auto mode, the “clock” is decided by the DTV signal.Clock --:-- Time ZoneYou can choose it to modify your time zone in the TV set.Menu system instructionTime-24-

Menu system instructionOptions1. Press key to display the main menu on the screen.2. Press p/q key to select "Option" option. 3. Press u key to enter “Option" submenu.1. Press p/q key to select “ " option. 2. Press OK or u key to select a proper language for OSD OSD Time Set the preferred amount of time for the OSD to be displayed on the screen.1. Press p/q key to select “Closed Caption" option. 2. Pressp/q key to select CC mode.Reset1.Press “p/q" key to select "Reset" option.2.Press “u" or "OK" key to confirm.3.Press "Yes" to confirm again, TV will turn off automaticly and change all setting to factory setting.Network ConfigurationPlease refer to "Network setting"behind.Software Update(USB)When the TV need to be updated, please copy the new software to a USB storage and inset the USB storage to TV, then operating by following steps.1.Press “p/q" key to select "Software Update" option.2.Press “u” or "OK" key to confirm.3.Press "Yes" to confirm again, the TV will update by USB, Please wait a few minutes and don't turn off the power, it will turn off automaticly when updating is finish.Internet Update CheckThis can update TV through internet.Network Update InformationDisplay the .User Mode1.Press “p/q" key to select "User Mode" option.2.Press “u” or "OK" key to confirm.OSD LanguageOSD LanguageClosed Caption Network Update InformationOSD LanguageOSD Time Closed CaptionResetNetwork ConfigurationSoftware Update(USB) Internet Update CheckNetwork Update InformationUser Mode-25-

$The " " feature automatically locks out programming that is deemed inappropriate for children. The user must first enter a Password before any of the lock restrictions can be set up or changed. 1(the default 0000 and universal password is 1980) Set the Lock function on or off. key to select "On" or "Off".Set Password Password "Set Password" submenu. Choose any 4-digits for your new password and enter them. As soon as the 4 digits are entered, the cursor skipped to “Confirm Password” item, re-enter the same 4 digits, and your new password has been memorized. USA TVUSA TV key to open USA TV menu.USA MPAAUSA MPAA key to open USA MPAA menu.Canada EnglishCanada English key to open Canada English menu.Parent Control. Press p/q key to select “Parent Control" option. 2. Press or u key to enter “Parent Control" submenu, "Enter Password" menu will appear,enter your 4-digit password to enter “Parent Control” submenu \ password is , the .Parent Control1. Press p/q key to select “Parent Control " option. 2. Press p/q1. Press p/q key to select "Set " option. 2. Enter your 4-digit password to enter When the programs is locked, you can also press the menu key, Info key and so on. Then you can press t/u key to callback the input-password window.Parental GuidanceThis option only used in DTV mode. 1. Press p/q key to select “Parental Guidance" option. 2.Prsee p/q key to select the lock level of the Parental Rate.1. Press p/q key to select " " option. 2. Press OK1. Press p/q key to select " " option. 2. Press OK1. Press p/q key to select " " option. 2. Press OKOKMenu system instructionParent ControlPlease Enter PasswordParent ControlSet PasswordUSA TVUSA MPAACanada EnglishCanada FrenchRRT SettingRRT ResetBlock Unrated TV-26-$

Shen Zhen MTC 58658641 LED TV User Manual MUAV6550Y 65864

Shen Zhen MTC Co., LTD LED TV MUAV6550Y 65864

Users Manual

Navigation menu

Namespaces

Views

Navigation