Sharp HRO00095 Cellular Phone User Manual 3
Sharp Corporation Cellular Phone Users Manual 3
UserManual.wiki
>
Sharp
>
HRO00095 User Manual
>
Users Manual 3
Contents
1.
Users Manual 1
2.
Users Manual 2
3.
Users Manual 3
4.
Users Manual 4
Users Manual 3
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![44e02_dv65_7e.fm[44/56]Before Using the Handset■Selecting a function from SubmenuOperate or change the settings from the Submenu in the same way as in the normal position (Menus may differ, or some menus cannot be selected depending on the screen). While using the function, quickly slide the finger from the upper right to the lower left (or from the upper left to the lower right) to display the Submenu.• Alternatively, touch [Submenu] of the control key, [D] on the upper part of the screen or [Submenu] in the operation guidance to display the Submenu. When scrolling the Submenu, slide up/down the area where Submenu is displayed. Touch the area other than the Submenu to hide the Submenu.In the viewer position, changing the settings, etc. is available with control keys or touch operations while using a function.■Operating with control key While using a function, touch the touch panel to show the control keys. Methods for hiding control keys are as follows.• Touch the area other than the control keys (excluding while watching 1Seg and playing a video).• No operations are performed for approximately 7 seconds with the control keys displayed (excluding while displaying the mail/message details screen). Touch [bNext] of the control key to show the next key. Control keys are not available depending on the functions.■Operating with touch operationEasily operate with the finger without displaying the Submenu or control keys. Available touch operations differ depending on the function or screen.■Operating with Long Touch MenuIf the Long Touch Menu is used in the image/i-motion data list screen with the Visual menu displayed, the following operations for images or i-motion can be easily used.Attach to mail Insert mail (image only)Post blog entry (image only) IrSS™ (JPEG image only)DeleteMove/Copy between the FOMA terminal handset and microSD Card1In the image/i-motion data list screen, point the cursor to the image/touch the image/i-motion for a while.:Long Touch Menu appears.2Slide the image and place it on the function to be used.Operation while using functionsExample: 1Seg Example: MUSIC Player The control keys always appear in the shooting screen or while the music data is played (excluding while viewing images/lyrics). Be careful not to touch a key shown in the screen. Perform touch operation after hiding control keys while e-books, Word and Excel files, etc. are displayed.e02_dv65_7e.fm 44 ページ ２００９年３月２０日 金曜日 午後５時２８分](https://usermanual.wiki/Sharp/HRO00095.Users-Manual-3/User-Guide-1098430-Page-1.png)
![45e02_dv65_7e.fm[45/56]Before Using the Handset■Other operationsSwitching pagesWhen a list screen contains multiple pages, switch pages by the following operations.Quickly slide to the left/rightTouch [(]/[)] or [F]/[G], etc (while displayed)Example: When switching from page 1/2 to 2/2 in the Inbox list screen Quickly slide to the right to return. Quickly slide to the left on the last page to return to the beginning.Adjusting volumeWhen the volume bar appears, keep touching the volume bar and slide up/down to adjust the volume.Number entryWhen numbers such as the terminal security code or PIN code are required to be entered in the vertical view, the numeric panel appears. Touch the numeric part. Touch the number in the input field to enter numbers for time setting, etc.Character entry For details on entering characters with the touch panel nP. 402Use this function for unsure operations. After the Support Book appears, check the explanation and operation procedures of each function. In addition, directly start functions that were looked up in the Support Book.1In stand-by, press $/[Support Book].2Select a menu or item/t.:To start functions directly: Select the function to start/t/[Yes].A FOMA card is an IC card that records personal information, such as phone numbers. A FOMA card can store phonebook data and SMS. By switching FOMA cards, multiple FOMA terminals can be used for different purposes as needed. If a FOMA card is not inserted, transmission functions such as voice/Videophone calls, i-mode, mail transmission and packet transmission are not available on the FOMA terminal. Before inserting or removing the FOMA card, turn off the power, position the back facing upwards and remove the battery pack. Close and hold the FOMA terminal securely with your both hands.Inbox list screenPage 1/2Inbox list screenPage 2/2Quickly slide to the leftSupport BookDisplaying Support BookFOMA cardUsing FOMA cardInserting/Removing FOMA carde02_dv65_7e.fm 45 ページ ２００９年３月２０日 金曜日 午後５時２８分](https://usermanual.wiki/Sharp/HRO00095.Users-Manual-3/User-Guide-1098430-Page-2.png)
![46e02_dv65_7e.fm[46/56]Before Using the Handset■Inserting FOMA card1Hook a finger on the tab and pull the tray out (1).:Pull out the tray straight until it stops.2Hold the FOMA card with the IC facing up and set on the tray (2).3Push the tray all the way in (3).■Removing FOMA card1Hook a finger on the tab, pull the tray out (1) and remove the FOMA card (2).:Do not allow the FOMA card to fall when removing it.The FOMA card has a “PIN1 code” and a “PIN2 code”.Both are set to [0000] by default but can be changed to a four- to eight-digit number by the user (nP. 114).The FOMA terminal has built-in FOMA card security functions (FOMA card restriction functions) as functions for protecting personal data and files. When data or files are retrieved using any of the following methods or i-appli is running with the FOMA card inserted into the FOMA terminal, FOMA card security functions are automatically set in the retrieved data or files.When a file such as an image, melody or PDF is downloaded from a site or Internet web pageWhen a site or Internet web page is added in screen memoWhen i-mode mail with a file attached is receivedWhen i-appli is running Data, files or software with FOMA card security functions run only when in use with the FOMA card inserted at time of acquisition. Display, play, attach to i-mode mail, run software, send data using Ir communication function and iC communication function, and copy to microSD Card can be executed. These operations cannot be performed if a different FOMA card is inserted. The following indicates the data for which FOMA card security is set.Melody Image (including animation and Flash movie)Screen memo Chaku-uta®/Chaku-uta full®Chara-den File attached to Message R/Fi-motion ToruCa (details) imagePDF data Image inserted to Deco-mail or signatureKisekae Tool Videophone picture memoMachi-chara i-appli (including i-appli stand-by)Download dictionaryDownload font Contents transfer compatible dataImage in Message R/F Inserting or removing the FOMA card forcibly may damage the card or deform the tray. Use caution. Refer to the FOMA card user’s guide for more information on the FOMA card. Do not misplace the FOMA card once it is taken out. When the tray falls off, slide the tray in straight along the guide rail.NotchIC (gold)2Tray3Fit the notch of the FOMA card tothat of the tray.1Tab12Security codesFOMA card security functions <FOMA card security functions>e02_dv65_7e.fm 46 ページ ２００９年３月２０日 金曜日 午後５時２８分](https://usermanual.wiki/Sharp/HRO00095.Users-Manual-3/User-Guide-1098430-Page-3.png)
![e02_dv65_7e.fm[47/56]47Continued on next pageBefore Using the HandsetMusic&Video Channel programDeco-mail template with data which FOMA card security functions are setDecome-Anime Templatee-book/e-dictionary/e-comic saved in the [Comic] folderFile attached to i-mode mail other than the following• ToruCa • Phonebook • Schedule• Bookmark • Documents※“Chaku-uta” is a registered trademark of the Sony Music Entertainment (Japan) Inc. The following indicates the settings saved in the FOMA card.Own number PIN settingSelect language SSL/TLS certificatesSMS center SMS expirySMS input character The following explanation refers to the FOMA card inserted at time of data/files retrieval as “one’s own FOMA card” and other FOMA cards as “another’s FOMA card”.Note the following differences between “FOMA card (blue)” and “FOMA card (green/white)” used on the FOMA terminal.One’s own FOMA card security functions are set for downloaded data, files attached to received mail and i-appli that have been run, allowing viewing and playback of data.When another’s FOMA card is inserted, data with one’s own FOMA card security functions set cannot be viewed or played.One’s own FOMA cardAnother’s FOMA cardDifferent FOMA card inserted When one’s own FOMA card is replaced with another’s FOMA card, the data or files for which FOMA card security functions are set cannot be set as stand-by displays or ring tones. When a FOMA card is replaced with another’s FOMA card, FOMA card security functions are activated and if data or file retrieved from a site is set as the stand-by display or ring tone, the setting is reset to the default. When one’s own FOMA card is re-inserted, the setting returns.Example: When setting [Melody A], for which FOMA card security functions are set, as a ring toneWhen one’s own FOMA card is taken out or is replaced with another’s FOMA card, ring tone returns to default setting. When one’s own FOMA card is put back, the ring tone returns to [Melody A]. FOMA card security functions cannot be set for data received using Ir communication or data transmission functions, and still/moving pictures, etc. shot with the FOMA terminal. It is possible to move or delete data or files for which FOMA card security functions are set even when another’s FOMA card is inserted. Running i-appli by selecting highlighted text in i-mode mail details screen cannot be performed or retrieved when FOMA card security functions are set. If the FOMA card is replaced with another’s FOMA card after i-appli stand-by is set, the set i-appli cannot be activated in stand-by, and the image set in Stand-by display appears.FOMA card typeFunction FOMA card (blue)FOMA card (green/white) PageNumber of phone number digits available in the FOMA card phonebookUp to 20 digits Up to 26 digits P. 83Client certificate operations for FirstPass Not available Available P. 187Use of WORLD WING Not available Available P. 426e02_dv65_7e.fm 47 ページ ２００９年３月２０日 金曜日 午後５時２８分](https://usermanual.wiki/Sharp/HRO00095.Users-Manual-3/User-Guide-1098430-Page-4.png)
![48e02_dv65_7e.fm[48/56]Before Using the HandsetUse the Battery Pack SH22 exclusive to the FOMA terminal. Turn off the power, close the FOMA terminal, and hold it in your both hands before attaching or removing the battery pack.■Attaching battery pack1Push the back cover in the direction of the arrow (1), slide approximately 2 mm (2) and remove the back cover (3).2Attach the battery pack (4).:The FOMA terminal has tabs that make it easy to attach. Attach the battery pack with a recycle mark side faced up.3Attach the back cover (5).:Place the back cover as shown in the illustration and then push the back cover and slide.Service Numbers Not available Available P. 416About WORLD WINGWORLD WING is a DOCOMO’s FOMA international roaming service that makes it possible to use the mobile phone number registered in Japan to make and receive calls even overseas by the FOMA card (green/white) and supported FOMA terminal. If subscribed to the FOMA service after September 1, 2005, subscription for “WORLD WING” is not required. However, if subscription for “WORLD WING” is canceled at or after subscription for the FOMA service, subscription for “WORLD WING” is required again. If subscribed to the FOMA service before August 31, 2005 but not subscribed to “WORLD WING”, subscription for “WORLD WING” is required. Some payment plans are not available. When the FOMA card (green/white) is lost or stolen overseas, promptly contact DOCOMO and conduct a procedure for canceling the use of service. Refer to General Inquiries on the back of this manual for inquiries. Note that transmission/calling charges after the FOMA card is lost or stolen are incurred to the subscriber.Attaching/Removing battery packFunction FOMA card (blue)FOMA card (green/white) PageFace the side with a recycle mark up4TabsBattery packBattery pack connector terminal side5e02_dv65_7e.fm 48 ページ ２００９年３月２０日 金曜日 午後５時２８分](https://usermanual.wiki/Sharp/HRO00095.Users-Manual-3/User-Guide-1098430-Page-5.png)
![49e02_dv65_7e.fm[49/56]Before Using the Handset■Removing battery pack1Follow step 1 of “Attaching battery pack” to remove the back cover.2Remove the battery pack.:The battery pack has a tab that makes it easy to remove. Hook a finger on the tab to prevent excessive force on it and remove the battery pack upward.The battery pack is not fully charged at the time of purchase. Be sure to charge the battery using the exclusive AC or DC adapter (sold separately) before use.■Cautions while charging Do not charge for long periods of time with the power left on. If the FOMA terminal is left on after charging is complete, the battery pack charge decreases.In such cases, the AC or DC adapter charges the battery again. However, depending on when the FOMA terminal is disconnected from the AC or DC adapter, the battery charge level may be low, the battery alert tone may sound, or the battery may only be usable for a short time. When the battery is empty and terminal is recharging, charging LED may not illuminate immediately. If the battery empty alert is displayed, the alert tone sounds and the power cannot be turned on, charge the battery for a while. If the battery empty alert is displayed and charging begins within 60 seconds of the alert tone, the status returns to normal. While charging, terminal may not turn on even when charging LED is illuminated in red. Charge longer and try turning power on again. Frequently recharging the battery when its power is still remaining enough may shorten the life of the battery pack. It is recommended to use the battery to a certain level before recharging.■Estimated charge times and LED displayThe following figures are estimated times for charging an empty battery pack with the FOMA terminal turned off. Charging LED illuminates in red while charging, and it turns off when charging is completed. Check that the battery pack has been properly attached when charging LED flashes red. The LED also flashes red when the battery pack has reached the end of its service life. The battery pack can also be charged with the FOMA terminal turned on (Battery icon flashes during charging). When the battery becomes warm, charging may automatically stop even if the battery has not been fully charged. Charging resumes after the temperature lowers to an appropriate temperature. While charging is stopped, charging LED turns off (Battery icon flashes while stopped). Using unnecessary force when attaching or removing the battery pack may damage the connector terminal for the battery pack (charger terminal) on the FOMA terminal. Securely close the back cover. If not closed securely, the back cover may come off and the battery pack may fall out due to vibration.ChargingTabFOMA AC Adapter 01/02 Approx. $$ minFOMA DC Adapter 01/02 Approx. $$ mine02_dv65_7e.fm 49 ページ ２００９年３月２０日 金曜日 午後５時２８分](https://usermanual.wiki/Sharp/HRO00095.Users-Manual-3/User-Guide-1098430-Page-6.png)
![50e02_dv65_7e.fm[50/56]Before Using the Handset■Estimated times of use when fully charged Continuous talk time is estimated as the usage time at normal transmission signal strength, and continuous stand-by time is estimated as the usage time while moving with the FOMA terminal folded at normal signal strength. Using i-mode reduces talk (transmission)/stand-by time. When i-Channel is subscribed, information is automatically received and updated, so talk (transmission)/stand-by time will be reduced. In addition, when shooting or editing an image, watching 1Seg, composing i-mode mail, activating the downloaded i-appli or the i-appli stand-by, or using MUSIC Player, i-motion player, Bluetooth function or data communication, the talk (transmission)/stand-by time will be reduced even if calls or i-mode transmission are not made. Some i-appli software may continue transmission even after downloading. To avoid this, set not to connect in advance. The actual usage time is a combination of stand-by time and talk time, and the longer the talk time, the shorter the stand-by time becomes. 1Seg watching time is estimated as the watching time at normal transmission signal strength with the Stereo Earphone Set 01 (sold separately) used. Talk (transmission)/stand-by time may be reduced by about half or 1Seg watching time may be shortened depending on battery pack status, function used, temperature and other environmental conditions, or signal strength (no signal or weak signal).■Battery pack service life Battery pack is a consumable product. Service time per charge is gradually reduced every time the battery is charged. When service time per charge is reduced to about half of the default time, this means that the battery pack is approaching the end of its service life. In such a case, it is recommended to replace the battery pack as soon as possible. Depending on usage, the battery pack may swell as it approaches the end of its service life but this will not cause problems. If i-appli, Videophone, or 1Seg is used while charging for a long time, the service life of the battery pack may become shorter than estimated. To prevent damage to the environment, bring used battery packs to a docomo service counter, a docomo agent or a recycle center.■About charging batteries Refer to user’s guide of FOMA AC Adapter 01/02 (sold separately), FOMA AC Adapter 01 for Global use (sold separately), or FOMA DC Adapter 01/02 (sold separately). FOMA AC Adapter 01 covers only 100V AC. FOMA AC Adapter 02/FOMA AC Adapter 01 for Global use covers from 100 to 240V AC. The shape of the plug for the AC adapter is for 100V AC (for domestic use). To use the AC adapter of 100 to 240V AC overseas, a conversion plug adapter that is compatible with the voltage of your country of stay is required. Do not use a transformer for use overseas to charge the battery.[Read “FOMA AC Adapter 01/02 (sold separately) and FOMA DC Adapter 01/02 (sold separately) user’s guide” carefully.] Battery pack can be charged even with the FOMA terminal opened or in the viewer position.1Open the external connector terminal cover (1) and insert the AC or DC adapter connector horizontally into the external connector terminal (2).Continuous talk timeFOMA/3G Voice call: Approx. $$ minVideophone call: Approx. $$ min (Substitute image: Approx. $$ min)GSM Voice call: Approx. $$ minContinuous stand-by timeFOMA/3G3G/GSM setting: 3GWhen mobile: Approx. $$ hr3G/GSM setting: AUTOWhen mobile: Approx. $$ hrAt rest: Approx. $$ hrGSM 3G/GSM setting: AUTOAt rest: Approx. $$ hr1Seg watching time Approx. $$ minCharging by using AC adapter/DC adaptere02_dv65_7e.fm 50 ページ ２００９年３月２０日 金曜日 午後５時２８分](https://usermanual.wiki/Sharp/HRO00095.Users-Manual-3/User-Guide-1098430-Page-7.png)
![e02_dv65_7e.fm[51/56]51Continued on next pageBefore Using the Handset:Check the direction (See diagram) of the connector, keep it parallel with the FOMA terminal and securely push all the way in until it clicks.2When inserting the AC adapter power plug into an outlet or inserting the DC adapter power plug into a car cigarette lighter socket, Charge start sound is heard, charging LED illuminates, and charging starts.3When Charge end sound is heard and charging LED turns off, charging is complete.:When removing the connector, always hold the release buttons on both sides (1) and unplug it horizontally (2).[Read “Desktop Holder SH26 (sold separately) user’s guide” carefully.] Battery pack can be charged in the viewer position. Battery pack cannot be charged with the FOMA terminal opened.Connector (Face the side with the arrows up)21External connector terminal coverExternal connector terminalCharging LED100V AC outletFor AC adapter For DC adapterCigarette lighter socket Do not forcibly insert or remove. May cause damage to the external connector terminal and the connector. Pull the adapter out of the outlet or cigarette lighter socket if it will not be used for a long time. Do not forcefully pull the external connector terminal cover. May damage the cover. Do not place objects near the FOMA terminal when charging. May damage the FOMA terminal. In addition, a display may be damaged when charged in the viewer position.When using a DC adapter The DC adapter should only be used in negative grounded vehicles (12 and 24V DC). Do not use with the car engine shut off. May drain the car battery. The DC adapter fuse (2A) is a consumable. For replacement, purchase a new fuse at a local automobile supply shop. Refer to the FOMA DC Adapter 01/02 user’s guide for details.Charging by using desktop holder121Release buttonse02_dv65_7e.fm 51 ページ ２００９年３月２０日 金曜日 午後５時２８分](https://usermanual.wiki/Sharp/HRO00095.Users-Manual-3/User-Guide-1098430-Page-8.png)
![52e02_dv65_7e.fm[52/56]Before Using the Handset1Face the side with the arrows of the AC adapter connector up and insert it into the connector terminal of the desktop holder (1).:Keeping the connector parallel with the desktop holder, securely push it all the way in until it clicks.2Insert the AC adapter power plug into an outlet (2).3When placing the FOMA terminal in the desktop holder, charge start sound is heard, charging LED illuminates, and charging starts.:Place the FOMA terminal in the direction of the arrow until it clicks as the figure shows (3).:Do not open the FOMA terminal while it is placed in the desktop holder.4When Charge end sound is heard and charging LED turns off, charging is complete.:Hold the desktop holder and lift the FOMA terminal out. If the battery icon is changed to [++電池マーク%表示], battery level is displayed in percentage. However, [&] appears when battery level is 100% while [(] appears when battery level is 4% or less. The battery icon and Percentage are rough indications.■Changing design of battery icon <Battery icon>1In the Custom menu, select [Settings]/[Battery]/[Battery icon]/i.Connector(Face the side with the arrows up)FOMA AC Adapter 01/02100V AC outlet312Charging LED Pull the AC adapter out of the outlet when left unused for a long period of time. When Charge start sound is not heard or when charging LED does not illuminate, check that the FOMA terminal is placed securely in the desktop holder (except when terminal is turned off, Manner mode is set or Charge start sound is Silent). When placing the FOMA terminal in the desktop holder, be careful that the strap is not caught in between the handset and the desktop holder.Battery levelChecking battery level"81 to 100% Battery is sufficiently remaining.061 to 80% Battery is remaining.!41 to 60% Battery level is low.#21 to 40% Battery level is very low.$1 to 20% Battery is almost empty. Charge the battery.%0% Battery is empty (Power will turn off soon).e02_dv65_7e.fm 52 ページ ２００９年３月２０日 金曜日 午後５時２８分](https://usermanual.wiki/Sharp/HRO00095.Users-Manual-3/User-Guide-1098430-Page-9.png)
![e02_dv65_7e.fm[53/56]53Continued on next pageBefore Using the Handset2Select an image/i.1In the Custom menu, select [Settings]/[Battery]/[Battery level].:Battery level is displayed in percentage and graphic. In addition, it is notified by the number of the battery level sound according to its remaining amount.:Wait approximately 5 seconds and the display disappears.:The battery level sound is heard at the volume set in Key/Touch sound (nP. 94).:If the Manner mode is set, the battery level sound follows the setting of the Manner mode.[Battery empty. Unsaved data will be lost. Ending current operation] appears if battery starts to run out (Press t to clear the message). After a while, an alert tone sounds. The warning screen stating that the battery runs out appears, handset operations are disabled and power turns off after approximately 60 seconds. During a voice/Videophone call, the alert tone sounds and [Battery empty. Unsaved data will be lost. Ending current operation] appears. The call is disconnected after approximately 20 seconds. At the same time, the screen above appears and after approximately 60 seconds, the power turns off. Alert tone does not sound when Manner mode or Public mode (Drive mode) is set (Alert tone sounds during a call).The following status appears depending on the battery pack status. The battery pack status is automatically measured after charging until the battery icon becomes ["].1In the Custom menu, select [Settings]/[Battery]/[Self-check]. Alternatively, change the battery icon from [Themes] in [Disp/LED/Power saver] of [Settings]. For details on changing nP. 106Checking battery level with sound and displayGraphic Number of beep soundFive timesFour timesThree timesTwiceOnceIf battery runs outSelf-checkChecking battery pack status Message MeaningBattery available Battery pack is available without problems.Battery slightly worn out. It might not be used for a long timeService time per charge is shorter than the default time.Time to exchange battery Service time per charge is less than half of the default time. Exchange the battery pack as soon as possible.Charge fully to perform Self-check Perform Self-check again after charging is complete. If Self-check is performed for the first time or the battery pack is attached again after removing it, the measurement of the battery pack takes time.e02_dv65_7e.fm 53 ページ ２００９年３月２０日 金曜日 午後５時２８分](https://usermanual.wiki/Sharp/HRO00095.Users-Manual-3/User-Guide-1098430-Page-10.png)
![54e02_dv65_7e.fm[54/56]Before Using the Handset1Press H (for 2+ seconds).:It may take some time for the wakeup screen to appear.:The wakeup screen appears followed by the initial settings screen. Proceed to Initial setting (nP. 54).:If initial settings have been completed, the screen shown on the right appears when power is turned on. This screen is called the “stand-by display”.Welcome mail:“Welcome$デコメアニメ%&” (Welcome$Decome-Anime%&) and “緊急速報「エリアメール」のご案内” (Information of Early Warning “Area Mail”) are saved by default.:To check a welcome mail: In stand-by, press t/select the stock icon [C] (mail message)/t.• For details on the following operations nP. 1421Press H (for 2+ seconds).:It may take some time for the power to be turned off (The end screen appears on the display until the power is turned off).1In the Custom menu, select [設定]/[一般設定]/[Bilingual]/[English].:To switch the display language from English to Japanese: In the Custom menu, select [Settings]/[General settings]/[Select language]/[日本語].The initial settings screen appears automatically when the power is turned on for the first time. Each setting item can also be set from Menu (When the initial settings are complete, the stand-by display appears). The battery pack status is properly measured with following conditions.Condition 1: Charge the battery pack until the battery icon changes from [%] to ["].Condition 2: After repeating the condition 1, perform no operation with the FOMA terminal turned on while measuring (approximately 1 to 5 hours). The battery pack may not be checked in extremely low temperatures.Power ON/OFFTurning power ON/OFFTurning power ON If initial settings are not yet completed, the setting screen appears every time the power is turned on. If the FOMA card is not inserted, [Insert UIM] and a FOMA card error appear (nP. 31).Stand-by display When [Enter PIN1 code] appears, enter the PIN1 code (nP. 114). When a FOMA card is replaced with a new card, the terminal security code (four to eight digits) must be entered after turning on the terminal. If a correct terminal security code is entered, stand-by display appears. When a wrong terminal security code is entered five times, the power is turned off. However, turning on the power again is possible. When [A] appears, the handset is outside the service area or in a place with no signal. Move to a place where the icon disappears.Turning power OFFSelect languageChanging screen display to English If a FOMA card is inserted, settings are saved to the FOMA card as well. When the setting of the FOMA terminal handset and the setting of the inserted FOMA card are different, the setting in the FOMA card is prioritized.Initial settingMaking initial settinge02_dv65_7e.fm 54 ページ ２００９年３月２０日 金曜日 午後５時２８分](https://usermanual.wiki/Sharp/HRO00095.Users-Manual-3/User-Guide-1098430-Page-11.png)