Sensio America SA40698 LED Wireless Receiver User Manual

Sensio America, LLC LED Wireless Receiver

User manual

User manual Product name: LED Wireless Receiver Model: SA40698 Manufacture: Signcomplex Limited Ⅰ. Product description The product adopts high performance processor and can control four types of low voltage LED products including single-color light bar, warm white light bar, RGB light bar and RGBW light bar. The remote controller may perform group control and DIY color setting. The control for color mode and change speed may be realized through 2.4G remote controller or Bluetooth APP with fine dimming and without flicker. Ⅱ. Product parameters Type型 Technical parameter SA40698-MONO SA40698-CCT SA40698-RGB SA40698-RGBW Work voltage 12/24/36V DC 12/24/36V DC 12/24/36V DC 12/24/36V DC Maximum current 5A*1CH, 2.5A*4CH Max 10A 2.5A*4CH Max 10A 3A*3CH Max 10A 2.5A*4CH Max 12A Maximum power 120W(12V)/240W(24V) /360W(36V) 120W(12V)/240W(24V) /360W(36V) 120W(12V)/240W(24V) /360W(36V) 120W(12V)/240W(24V) /360W(36V) Control group number Four groups Two groups One group One group Control type Single-color light bar/single-color lamp Warm white light bar/warm white lamp RGB light bar/RGB lamp RGBW light bar/RGBW lamp Matched remote controller 9-key controller - 36-key controller - Remote control environment 100 meters (open condition) - 100 meters (open condition) - Work environment Indoor Work temperature -30℃~50℃ Waterproof grade IP20 Ⅲ. The matching function of “ID learning keys” on the controllers 1. How to match the remote controller 1) Power on the remote controller; 2) Press “ID learn key” on the controller and the controller enters the learning state.
3) Press any key on the remote controller to match successful. 2. How to realize group control on the remote controller (9-key controller). 1). Connect four groups of light bar at the output end of the controller and then power on the controller. 2). First, press “ID learn key” on the controller. Then press “group 1” on the controller and the first group can be matched successfully. If you want to add other groups in the group, repeat above operation. 3) Then, press the “ID learn key” on the controller. Then press “group 2” on the remote controller to match the second group successfully. If you want to add other groups in the group, repeat above operation. The group 3 and group 4 can be matched in the same way. 4). There are four groups of controllers. If you want to control the first group, just press “group 1” on the remote controller to carry out dimming operation for group 1; if you want to control the second group, just press “group 2” on the remote controller to carry out dimming operation for group 2; if you want to control group 1, 2, 3 and 4 together, you may press the “group control switch” on the controller and can carry out dimming operation for all controllers of the 4 groups. 3. How to cancel matched remote controllers 1) Power on the controller; 2) Hold down the key on the remote controller for 6 seconds to cancel the previously matched controllers. Ⅳ. Color mode (equipped with 36-key remote controller) 1. Static red 2. Static green 3. Static blue 4. Static yellow 5. Static purple 6. Static cyan 7. Static white 5. Red-green jumping change 9. Red-blue jumping change 10. Green-blue jumping change 11. Yellow-cyan jumping change
12. Yellow-purple jumping change 13. Cyan-purple jumping change 14. Red-green-blue jumping change 15. Yellow-purple-cyan jumping change 16. Red-green-blue-yellow-purple-cyan-white 7 colors jumping change 17. Red gradual change 18. Green gradual change 19. Blue gradual change 20. Yellow gradual change 21. Purple gradual change 22. Cyan gradual change 23. White gradual change 24. Red-green gradual change 25. Red-blue gradual change 26. Green-blue gradual change 27. Yellow-cyan gradual change 28. Yellow-purple gradual change 29. Cyan-purple gradual change 30. Red-green-blue gradual change 31. Yellow-purple-cyan gradual change 32. Red-green-blue- yellow- purple- cyan- white 7 colors gradual change 33. Red-green mixed color gradual change 34. Red-blue mixed color gradual change 35. Green-blue mixed color gradual change 36. Red-green-blue mixed color gradual change 37. Red flickering 38. Green flickering 39. Blue flickering 40. Yellow flickering
41. Purple flickering 42. Cyan flickering 43. White flickering 44. Red-green flickering 45. Red-blue flickering 46. Green-blue flickering 47. Yellow-cyan flickering 48. Yellow-purple flickering 49. Cyan-purple flickering 50. Red-green-blue flickering 51. Yellow-purple-cyan flickering 52. Red-green-blue-yellow-purple-cyan-white 7 colors flickering Ⅵ. Dimension drawing (unit: mm)
Ⅶ. Interface picture Single color interface warm white interface
RGB interface RGBW interface Ⅷ. Considerations 1. The product should be debugged and installed by professional personnel. 2. When the controller is installed, the power supply of the controller should be disconnected. The corresponding LED product and controller should be connected properly. Then power on the remote controller after confirming the connection is correct. 3. The product is not waterproof and used in dry environment. 4. Good heat emission condition may extend service life of the controller. Please put the product under the environment with good ventilation. 5. Ensure that the voltage complies with the requirement of voltage scope of the product. 6. The line size used must bear the connected load and ensure that connection is firm. 7. before debugging with electricity, ensure that all wire connection is correct to avoid damage to lamps due to wrong wire connection. 8. If the failure takes place, don’t repair it by yourself. Please contact the manufacturer.
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Navigation menu