SecuEasy Electronic ND101D Smart IP Camera User Manual

Shenzhen SecuEasy Electronic Co., Ltd. Smart IP Camera

Contents

User manual

CloudCam User GuideCloudCam User Guide1. Package1.1 ListItemSmart IP CameraPower AdapterFixed Bracket and ScrewNumberOneCableOneOneOne1.2 LED/ResetWiFi status:Orange Led:ON－WiFi Connect successfully OFF－WiFi not connectedSystem statusGreen Led:ON－Power on OFF－Power offPress reset(>1s) to default setting, Default password: admin.CameraPowerTF/SD card slotCableconnecting1.3 Fix the CloudCam1) Screw off the circular shaft on the bracket and life one end of bracket,2) Install the bracket and tighten the circular shaft,use the screw to fix it,3) Connect the circular shaft and the camera,tighten it clockwise.2. User guide2.1 SummaryCloudCam is DHCP client device,need your router enable DHCP service.Step 1.CloudCam connect to the power adapter and power on,Step 2.Green Led is on,WiFi AP mode，if the Green Led is off， please press the Reset to default setting,Step 3.Download CloudCamLive APP，and add your camera by local network or QR code scanning to add your camera,Step 4.Set parameter .2.2 Install AppDownload CloudCamLive APPAndroid APK IOS AppGoogle Play: Search CloudCamLiveor scan the qrcodeApp Store: CloudCamLive orscan the qrcodeCloudCamera RouterCloudCamera Router2.3 Add/Setup Cloud CameraTwo methods to setup your camera:1.Local Network，search in your local network or scan the QRCode to add your camera,2.Manual，manual input your camera’s UID, name and password .2.4 Local Network/ManualSearch in local network or Scan the QRCodeStep 1.Open CloudCamLive APP,Clieck and select the “Local Network”,Antenna
Step 2. Search in your local network or scan the QRCode in the camera’s back,Step 3.Edit camera，Input the name and password（Default: admin） Click“Save”to save camera’s info.Manual input：Refer to the Step 4，manual type 20bit UID and password to add your camera.Step 4 Set WiFi parameter，Click“ ”to enter the camera’s parameter setting page, if smartphone is connect to the camera, Clieck WiF Setting to set your wifi parameter to the camera..2.5. Live viewingClick the camera list(online-green name)2.6 Modify passwordSelect“Camera passwd”, input old password, new password andconfirm password and click the Save button：2.7 OthersVideo：quality/mirror/flip,Motion：motion sense and notify,Env：50/60HZ,Record：motion /all /no record，Format TF,Delete camera.snapshot、record listen speaker、 、4. FAQThe picture is for reference only, the product color, sizi, screen and refer to the actual product.FAQNo powerNo LED is lightNo live viewNo framesReasonPower apapter is notconnect or jack is loosea. WIFI router is not connected to internet b. Mobile phone is not connected to internetSolutionMake sure power supplyMake sure your WiFi/3G/4G network is connect to the internet3. Computer application user guide3.1 Open the P2PCamWin on computer3.2 Click the add botton 3.3 Then search3.4 Double click the device ID, then input the password to add it3.5 Save it, then can back to see live view CloudCam is DHCP client device,need your router enable DHCP service.CloudCamModel:SE-ND101DUser:adminPassword:adminUID:XXXXXXXXXXXXXXXXXXXXCloudCam
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu