Schlage Electronic Security BR100 Z-Wave to Ethernet Bridge User Manual link system setup 7 indd

Schlage Electronic Security Z-Wave to Ethernet Bridge link system setup 7 indd

Exhibit D Users Manual per 2 1033 b3

3System SetupImportant InformationLock Programming Code six (6) digitsBridge MAC IDtwelve (12) charactersWeb Support: testmydoorlock.comCustomer Service: (877) 288-7707The lock should already be installed on your door. If not, use the installation instructions (document number 2) to install the lock and then come back to this document.ORLocate the programming code, on top of document 2. Write the programming code in the “Important Information” box at the top of this page.The programming code is six digits long and is located on the • yellow sticker on the installation sheet that is packed in the box.The programming code can be changed. If you have changed • your programming code, the code that is printed on the label will not work. (See Manual Programming and Troubleshooting at testmydoorlock.com.)If you don’t remember your programming code, you can reset your • lock, which will restore the original programming code. (See Manual Programming and Troubleshooting at testmydoorlock.com.)1OR O OU!Without these user codes, you can get locked out.Si no cuenta con estos códigos de usuario, es posible que no pueda abrir.Vous ne pouvez entrer sans déverrouiller à l'aide des codes d'utilisateur.Preset CodesCódigos preajustadosPréréglage des codesProgramming CodeCódigo de programaciónCode de programmationUser CodesCódigos de usuarioCodes utilisateurLock ModelModelo de la cerraduraModèle de serrureSerial NumberNúmero de serieNuméro de sérieAlternate FaceplateChapa frontal alternaPlateau à trous alternatif2Install LockInstalación de la cerradura Installer le verrou1OROOU2 ³⁄₄180°2³⁄₄” (70 mm)2³⁄₈” (60 mm)Choose Faceplate to Match DoorEscoja la placa delantera para emparejar la puertaChoisir la têtière pour égaler la porteOROOU443OROOU45!66Caution Precaución Mise en garde73TopParte superiorHautTopParte superiorHautMatch arrowsLas flechas deben quedar alineadasAligner les flèches2³⁄₈” (60 mm)OR O OU2³⁄₄” (70 mm)2¹⁄₈” (53 mm)HoleAgujeroTro u5¹⁄₂” (140 mm)MinimumMínimoMinimum(2)P515-861Installation InstructionsInstrucciones de instalaciónNotice d'installationCheck DimensionsRevise las dimensionesVérifier les dimensions2Prog Code XXXXXXUser Code A XXXXUser Code B XXXX(FCC ID: P2GXXXXX)XXXXXSN XXXXXXXXXProg Code XXXXXXUser Code A XXXXUser Code B XXXX(FCC ID: P2GXXXXX)XXXXXSN XXXXXXXXXLocate the bridge MAC ID. Write the MAC ID in the “Important Information” box at the top of this page.The MAC ID is 12 characters long and is located on the yellow label • inside the battery compartment of the bridge.2MAC ID:XXXXXXXXXXXX
Install the light module.The light module also repeats the Z-Wave signal. If the fi nal • location of the bridge (where it can be connected to your router) is more than 60 feet (18 meters) from the lock, use an outlet that is approximately half way between the lock and the bridge.The light module should be installed into any indoor, three-prong, • 120 volt A/C outlet.3Plug a lamp into the Z-Wave side of the light module.There are two outlets on the light module. One of the outlets has • only two prongs and is labelled with a Z-Wave sticker. A lamp (25 watts minimum and 300 watts maximum) must be plugged in to the Z-Wave side of the light module for proper operation.Use only an incandescent light bulb in the lamp that is plugged into • the light module. DO NOT use a CFL (compact fl uorescent light bulb).The other outlet has three prongs and can be used simply as an • outlet (1500 watts maximum). It is not controlled by the system, and the system is not affected when it is used.4Max. 300W IncandescentInstall the 9 volt battery into the bridge.Use the 9 volt battery that is included in the box.• Use any premium quality 9 volt battery for replacement.• 5
This portion of the setup is complete. For the next portion, please ensure that you have one of the following browsers installed on your computer:Internet Explorer 7.0 (http://www.microsoft.com/windows/downloads/ie/getitnow.mspx) ●Firefox 3.0 (http://www.mozilla.com) ●For troubleshooting, see testmydoorlock.com.Enroll the light module into the bridge.Hold the bridge within 6 feet (1.8 meters) of the light a. module throughout all of step 6.Press and release the plus (+) button on the bridge.b. Double-click the button on the light module.c. Observe the lights on bridge. The orange light will blink d. while enrollment is taking place. Enrollment is complete when the orange light becomes solid.67Using either Internet Explorer 7.0 or Firefox 3.0, browse to www.schlagelink.com and follow the on-screen instructions. 4Enroll the lock into the bridge.Hold the bridge within 6 feet (1.8 meters) of the lock a. throughout all of step 7.Press and release the plus (+) button on the bridge. b. You have 30 (thirty) seconds to complete the remainder of the steps.On the lock keypad, press the six-digit programming c. code (located in the “Important Information” box).Wait for the lock to beep three times and the Schlage d. button on the lock to fl ash orange three times.On the lock keypad, press the Schlage button and then e. the 0 (zero) button. The lock will begin to beep.On the lock keypad, observe the Schlage button. If the f. Schlage button fl ashes green, enrollment was successful. If the Schlage button fl ashes red, enrollment was unsuccessful and you should start over at step 7a. If enrollment is unsuccessful multiple times, call customer service (877-288-7707).• Observe the lights on bridge. The orange light will blink while enrollment is taking place. Enrollment is g. complete when the orange light becomes solid.
©2008 Schlage Lock Companylink system setup Rev. 10/08-7This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: P2GBE369FCC ID: P2GFE369FCC ID: P2GBR100PATENT NOTICESchlage® products and those of its subsidiary companies and licensees may be covered by both issued and pending U.S. and foreign patents, copyrights and trademarks. Manufactured items are covered by one or more of the following patents: 507071551525585308131539514455931935598726564086356831275715717576541257694725809816581608658202905881590591891662863476297725652337565333366540274658142668025466905773692631971434777159424D372417D372854D406056D406528D426452D428324D450558D457048D457049D458829D467155D472788D487388D520331D520332D537702D541620D543435Lifetime Limited Mechanical and Finish Warranty and 1-Year Limited Electronics WarrantySubject to the terms and conditions of this warranty, Schlage extends a lifetime limited mechanical and fi nish warranty and a one-year limited electronics warranty to the original consumer user (“Original User”) of our Schlage brand product (“Product”) against defects in material and workmanship, as long as the Original User occupies the residential premises upon which the Product was originally installed. What Schlage will do: Upon return of the defective Product to Schlage, Schlage’s sole obligation, at its option, is to either repair or replace the Product, or refund the original purchase price in exchange for the Product. Original User: This warranty only applies to the Original User of Products. This warranty is not transferable. What is not covered: The following costs, expenses and damages are not covered by the provisions of this limited warranty: (i) labor costs including, but not limited to, such costs as the removal and reinstallation of Product; (ii) shipping and freight expenses required to return Product to Schlage; (iii) failures, defects, or damage (including, but not limited to, any security failure or loss of data) caused by any third party product, service, or system connected or used in conjunction with the Product; and (iv) any other incidental, consequential, indirect, special and/or punitive damages, whether based on contract, warranty, tort (including, but not limited to, strict liability or negligence), patent infringement, or otherwise, even if advised of the possibility of such damages. Some local laws do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you.The provisions of this warranty do not apply to Products: (i) used in commercial applications; (ii) used in common area applications; (iii) used for purposes for which they are not designed or intended; (iv) which have been subjected to alteration, abuse, misuse, negligence or accident; (v) which have been improperly stored, installed, maintained or operated; (vi) which have been used in violation of written instructions provided by Schlage; (vii) which have been subjected to improper temperature, humidity or other environmental conditions; or (viii) which, based on Schlage’s examination, do not disclose to Schlage’s satisfaction non-conformance to the warranty. Additionally, this warranty DOES NOT COVER scratches, abrasions, or deterioration due to the use of paints, solvents or other chemicals. Exclusions: Oil Rubbed Bronze fi nish (613) is designed to improve over time and change in appearance, creating a living fi nish through daily use and thus, fi nish discoloration is not applicable to the above warranty.Additional terms: Schlage does not authorize any person to create for it any obligation or liability in connection with the Product. Schlage’s maximum liability hereunder is limited to the original purchase price of the Product. No action arising out of any claimed breach of this warranty by Schlage may be brought by the Original User more than one (1) year after the cause of action has arisen.How local law applies: This warranty gives you specifi c legal rights, and you may also have other rights as otherwise permitted by law. If this Product is considered a consumer product, please be advised that some local laws do not allow limitations on incidental or consequential damages or how long an implied warranty lasts, so that the above limitations may not fully apply. Refer to your local laws for your specifi c rights under this warranty.Guaranteed Fit Program: Schlage products are designed to fi t standard residential door preparations and retrofi t existing tubular locks. Note: Mortise locks and preparations are not considered standard and are not guaranteed under this program. During the initial installation, if there is a problem with the Product’s performance, the Original User may simply contact Schlage Customer Service at 888-805-9837 in the U.S. and Canada or 800-506-7866 in Mexico for assistance.Program and warranty claims: If you encounter a residential door preparation or fi t issue under the Guaranteed Fit Program or have a claim under this warranty, please contact Schlage Customer Service for repair, replacement or refund of the original purchase price in exchange for the return of the Product to Schlage

Navigation menu