Scanreco G5POCKETLP 2.4 GHz Transceiver User Manual

Scanreco AB 2.4 GHz Transceiver

User Manual

Instruction Manual66067 AEnglishDocument Revision LanguageG5 LP
Attribute InformationDocument Type Instruction ManualTitle SCANRECO G5 PocketDocument No. 66067Language EnglishRelease date 2014-02-07Original EnglishRelease date (original) 2014-02-07Author SCANRECOCompany SCANRECO AB, SWEDENRevision Date NoteA 2014-02-07 First releaseDocument informationRevision historyAll rights reservedDesign, equipment, technical data and specications are subject to change or improvement without prior notice. The text in this instruction manual, or any part of it may not be reproduced or transmitted in any form or by any means, including electronic, mechanical, photocopying, recording, storage in an information retrieval system, or otherwise, without prior written permis-sion of SCANRECO AB, SWEDEN.Document type Document number PageRevInstruction Manual 66067 A2 of 9
Product description G5 Pocket TransmitterThe G5 Pocket HCU is a light weight, impact and water resistant handheld unit equipped with up to eight ON/OFF function buttons. It has ve congurable Light Emitting Diodes (LED) for machine and status feedback. The buttons and the LED’s can be congured for a variety of different operations. The unit is powered with 3 standard AAA batteries and the backside has a belt clip for convenient at-tachment on the operator’s belt.Belt clip Battery compartment(Belt clip removed)LabelLED 1 Button 1 Button 4 Button 3 Button 6Button 2 Button 5 Button 7 Button 8LED 2 LED 3 LED 4 LED 5 Document type Document number PageRevInstruction Manual 66067 A3 of 9
ONIN OUTOFF1 2 3 1425361472583614ON25OFF36142536STOPFnModel FunctionsG5 LP3 3 Push buttons G5 LP4 4 Push buttonsG5 LP6 6 Push buttonsG5 LP8 8 Push buttons Versions The G5 Pocket transmitter exists in the following versions: Functionality The G5 Pocket systems are required to be congured prior to operation but normally this is done already before delivery. The push buttons are easily programmed to acti-vate any output or series of functions. Button denitions include momentary, inter-locked, non-latched or latched output. G5 LP3 G5 LP4 G5 LP6 G5 LP8 G5 LP8 G5 LP8The models may have the different printed symbols on the buttons, colors, scripts, pictures etc. Document type Document number PageRevInstruction Manual 66067 A4 of 9
5.4 Changing battery The G5 Pocket transmitter is equipped with 3 standard AAA cell batteries; to change batteries follow the instructions below1. Remove the belt clip by unscrewing the top middle screw.2. Unscrew the three screws holding the lid.3. Remove the batteries.4. Remove all dirt/dust to ensure no water can enter the unit.5. Insert new batteries, mind the polarity!6. Reassemble the lid and the belt clip. Tighten the screws according to chapter 7.4.Document type Document number PageRevInstruction Manual 66067 A5 of 9
38,8mm75,2mm38mm27mm115mm67mmAttribute InformationHousing material Plastic PC-ABSIP-class IP67Ambient temperature -25˚C to +70˚CSupply 3 x AAA batteryOperating time Several months (depending of usage and application)Weight 160 g (0,35lb.) including batteryDimensions: Technical information Size : approx. ~ 115 x 67 x 38 mm / ~ 4,5 x 2,6 x 1,5 in. (incl. belt clip/holder). Weight: incl. battery: approx. ~ 160 gram / ~ 0.35 lb.Document type Document number PageRevInstruction Manual 66067 A6 of 9
Attribute InformationFrequency 2,400 - 2,4835 GHzChannels managementFHSSDSSSTHSSChannel order PseudorandomChannel capacityDuplexSystem address/ID<16777216 unique system addresses availableRedundancy CRC-16Range 100 meters Technical information The G5 system family incorporates an automated frequency jumping technology, a reliable radio transmission highly resistant to interference.The radio transmission takes place within the ISM-band used at pre-dened channels.The channel switching takes place multiple times per second following a pseudorandom se-quence. This ensures that transmission takes place on an optimal frequency at all times!No transmitter uses the same pseudorandom sequence order when switching channels; this minimizes the risk of two G5 systems interfering with each other.The G5 Pocket is approved to transmit on the ISM band. The radio is license free for the end user. Radio informationDocument type Document number PageRevInstruction Manual 66067 A7 of 9
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates,uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.CAN ICES-3 (A)/NMB-3(A)Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.WarningThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC information Industry Canada Information Document type Document number PageRevInstruction Manual 66067 A8 of 9

Navigation menu