Savi Technology 650MR-V4 RFID Security Device Reader User Manual SMR650withIntermec

Savi Technology Inc RFID Security Device Reader SMR650withIntermec

Users Manual

User GuideSavi Mobile Reader SMR-650 for the Intermec 751G/A Mobile Computer and PCVersion 1.0
Published August 2005Part number 805-04750-001 Rev ADocumentation for Savi Mobile Reader SMR-650 for the Intermec 751G/A Mobile Computer and PC, version 1.0Copyright © 2005 Savi Technology, Inc. All rights reserved.Information in this manual is subject to change without notice and does not represent a commitment from the vendor. The software and/or databases described in this document are furnished under a license agreement or nondisclosure agreement. The software and/or databases may be used or copied only in accordance with the terms of the agreement. It is against the law to copy the software on any medium except as specifically allowed in the license or nondisclosure agreement.Savi, Savi SmartChain, SmartChain, the Savi logo, EchoPoint, the EchoPoint logo, and UDAP are trademarks or registered trademarks of Savi Technology, Inc. in the United States and other countries.Other product names mentioned in this guide may be trademarks or registered trademarks of their respective owners and are hereby acknowledged.Savi Technology, Inc.615 Tasman DriveSunnyvale, CA 94089-1707Phone: 1-408-743-8000Facsimile: 1-408-543-8650www.savi.com
Savi Mobile Reader SMR-650 User Guide 3Contents1About the Savi Mobile Reader SMR-650and Mobile ComputerSMR-650 Reader Communication. . . . . . . . . . . . . . . . . . . . . . . . . 7UHF Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7LF Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Optimizing the SMR-650-212 Reader Tag Collection Range . . . . 8Operating the Mobile Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Turning on the Keypad Backlight . . . . . . . . . . . . . . . . . . . . . . 10Intermec 751G/A Mobile Computer Keypad . . . . . . . . . . . . . . 11Keys Unique to the Intermec 751G/A Mobile Computer . . . . 11Reset Contacts in Pinholes on the SMR-650 . . . . . . . . . . . . . . 12For More Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Guides to Read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Contacting Savi Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132Assembling and Using the Intermec HolsterInserting the Mobile Device into the Holster. . . . . . . . . . . . . . . . 153Recharging BatteriesRecharging the SMR-650-212 Reader Battery . . . . . . . . . . . . . . 17Recharging the SMR-650-210 and SMR-650-213Reader Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Determining Available Battery Power . . . . . . . . . . . . . . . . . . . . . 20
44Printing LabelsConnecting the Printer to the Mobile Device . . . . . . . . . . . . . . . . 22Using the Intermec Boot to Connect to the Mobile Device . . . 22Using the Intermec Dock to Connect to the Mobile Device . . . 24ASMR-650 Reader SpecificationsBHardware ComponentsSMR-650-212 Reader Components . . . . . . . . . . . . . . . . . . . . . . . 34SMR-650-210 and SMR-650-213 Reader Components . . . . . . . . 34
CHAPTER 1Savi Mobile Reader SMR-650 User Guide 5About the Savi Mobile Reader SMR-650 and Mobile Computer1Savi® Mobile Reader SMR-650 is a portable radio frequency identification (RFID) reader that communicates with Savi RFID tags. There are three models of the Savi Mobile Reader SMR-650:◆SMR-650-212◆SMR-650-210◆SMR-650-213The SMR-650-212 Reader is mounted on the Intermec® 751G/A Mobile Computer and is packaged in kits that provide a specific set of components. Kits can include different hardware or software accessories, as well as different versions of the mobile computer. For example, kit models 741G-Kit-C-101x and 751G-Kit-C-101x include a custom Intermec cable, bracket, and mounting hardware. Model 741G-Kit-C-101x includes a batch Intermec 751G/A Mobile Computer that communicates with the wired LAN, while model 751G-Kit-C-101x includes a Wi-Fi Intermec 751G/A Mobile Computer that communicates with the wireless LAN. Preinstalled software applications include Savi SmartChain® Mobile Manager, SmartChain® for Mobile Devices, or SmartChain Transportation Security System (TSS) for Mobile Devices. Hardware accessories include the portable Zebra® printer, boot for the printer, and serial cable with an RJ-45 and DB-9 connector.The SMR-650-210 Reader and SMR-650-213 Reader include serial DB-9 interface connectors and work with a notebook or desktop PC or other devices with DB-9 RS-232 serial connectors. The only difference between the SMR-650-210 Reader and the SMR-650-213 Reader is the length of the cable for the DB-9 connector. The SMR-650-210 Reader has a 1-foot (30.48 cm) cable and the SMR-650-213 Reader has a 9-foot (2.74 m) cable.
CHAPTER 1About the Savi Mobile Reader SMR-650 and Mobile Computer6This guide is primarily designed for use of the SMR-650-212 Reader as packaged in kit models 741G-Kit-C-101x and 751G-Kit-C-101x. It also describes reader functionality, components, and specifications.Note:In this guide, when the model of the mobile reader or kit is not specifically mentioned, the information applies to all mobile reader models and kits. For information about using the SMR-650-210 and SMR-650-213 Readers with PCs, refer to the Savi SmartChain Client Tools User Guide. For information about software applications, verify which software you have preinstalled on your mobile device and refer to the Savi SmartChain Mobile Manager Pocket User Guide, Guide to SmartChain for Mobile Devices, or the Guide to SmartChain Transportation Security System for Mobile Devices.Figure 1-1 Mobile deviceSMR-650-212 ReaderIntermec 751G/A Mobile Computer
SMR-650 Reader CommunicationSavi Mobile Reader SMR-650 User Guide 7SMR-650 Reader CommunicationThe SMR-650 Reader has an ultra high frequency (UHF) transceiver and low frequency (LF) transmitter that communicate with all Savi RFID tags via the UHF and LF antennas. Your software determines if you are using UHF or LF commands.The SMR-650-212 Reader works on a wireless or wired LAN so you can download and upload information to and from your database.UHF ModeThe UHF transmitter sends commands and write information to Savi RFID tags. In UHF mode, the mobile reader supports single and continuous collection modes.When the mobile reader is in single UHF mode, you can only perform one tag collection within a fixed radius. When the mobile reader is in continuous UHF mode, you can perform multiple tag collections while moving through a facility.The yellow status LED shows when the SMR-650 Reader is receiving a UHF signal. When the yellow LED flashes, it indicates that the mobile reader received a valid data packet. The yellow LED continues to flash until all data is received. The yellow LED is not functional during UHF transmit or LF transmit.Figure 1-2 LEDs and pin connector (jack) for recharging for SMR-650-212 Reader Green LED flashes to indicate battery operating modeYellow LED flashes to indicate mobile reader is receiving dataPin connector (jack) for rechargingReset contacts in pinholes
CHAPTER 1About the Savi Mobile Reader SMR-650 and Mobile Computer8Figure 1-3 Reset contacts, LEDs, and pin connector (jack) for recharging for SMR-650-210 and SMR-650-213LF ModeLF mode is controlled by the software running on the mobile computer. LF mode is compatible only with SaviTags. To use LF mode, you must turn it on in your software. With your software, you can use LF mode to perform short-range communications up to 3 feet (.91 m)Optimizing the SMR-650-212 Reader Tag Collection RangeTo optimize the SMR-650-212 Reader tag collection range, hold the mobile device as shown in Figure 1-4. Make sure the device is:◆Parallel to your body◆Vertical, close to eye levelMost tags within an omni-directional pattern of 200 feet (61 m) are collected.Reset contacts, LEDs, and pin connector (jack) for SMR-650-210 and SMR-650-213
Optimizing the SMR-650-212 Reader Tag Collection RangeSavi Mobile Reader SMR-650 User Guide 9Figure 1-4 Hold the mobile device close to eye level and parallel to your bodyfor optimal tag collectionFactors that can limit the SMR-650 Reader collection range include:◆Obstructions such as multiple walls, chained areas, solid-core doors, and enclosures◆RF interference from other equipment such as computers, cellular phones, walkie-talkies, elevators, electrical motors, or other RF-emitting devices◆Reflection from the ground and from nearby objects◆Position and orientation of the SMR-650 Reader◆Metal or RF-absorbent surface on the tracked item◆Tag location relative to the SMR-650 Reader, such as behind a metal obstruction or stacked under multiple layersRadio interference also affects the probability of collecting any given tag, and you can expect some variance in repeatability in the field.
CHAPTER 1About the Savi Mobile Reader SMR-650 and Mobile Computer10Operating the Mobile DeviceThe mobile device consists of the SMR-650-212 Reader mounted on an Intermec 751G/A Mobile Computer, which runs the Windows CE .NET 4.2 operating system and includes a 42-character alphanumeric keyboard. The Intermec 751G/A Mobile Computer features a backlight for the keypad.Note:This guide provides general information for operating the Intermec 751G/A Mobile Computer keypad. For more information regarding Intermec products, refer to the Intermec 751G Computer with Alphanumeric Keypad User’s Manual on the CD that is packaged with your mobile device.Turning on the Keypad BacklightIf you work in dim or unlit areas, you can turn on the keypad backlight.1. Turn on your mobile computer.2. Select Start > Settings > Control Panel.3. Select the Backlight icon.4. Select the Keyboard tab.5. Use the arrows on your keypad to select your backlight settings.6. Select OK.
Operating the Mobile DeviceSavi Mobile Reader SMR-650 User Guide 11Intermec 751G/A Mobile Computer KeypadFigure 1-5 shows the keypad of the Intermec 751G/A Mobile Computer.Figure 1-5 Intermec 751G/A Mobile Computer Keypad Keys Unique to the Intermec 751G/A Mobile ComputerBlue Alpha Plane KeyThe Blue Alpha Plane key allows you to enter letters. When you press this key, the keypad stays in Alpha mode until you press the Blue Alpha Plane key again. Hold the Caps Lock key to enter the next letter in uppercase.Gold/White Plane KeyThe Gold/White Plane key allows you to access display controls, special characters, and Windows CE options. Most keys have a secondary function that you can access by pressing the Gold/White Plane key. For example, the @ symbol shares the K key on the keypad, which means that to enter the @ symbol, you press the Gold/White Plane key and then the K key.Use the Gold/White Plane key to access display controls, special characters, and Windows CE optionsUse the Blue Alpha Plane key to enter letters
CHAPTER 1About the Savi Mobile Reader SMR-650 and Mobile Computer12Reset Contacts in Pinholes on the SMR-650For the SMR-650-212 Reader, the reset contacts are located in the pinholes on the unit. For the SMR-650-210 and SMR-650-213 Readers, the reset contacts are located in the pinholes on the cable. See Figure 1-2 and Figure 1-3 for reset pinhole location.If the SMR-650 Reader is not communicating with Savi RFID tags, insert the tips of an unfolded paper clip (made into a U-shape) into the pinholes simultaneously to reboot the unit.Note:Before rebooting, examine the connections for the mobile device or SMR-650-210 or SMR-650-213 reader with the desktop or notebook computer. Verify that the mobile reader has a fully charged battery by checking the battery. See “Determining Available Battery Power” on page 20.For More InformationGuides to ReadOther documentation for the SMR-650 Reader in kit models 741G-Kit-C-101x and 751G-Kit-C-101x includes:◆Savi SmartChain Mobile Manager Pocket User Guide and the Savi SmartChain Mobile Manager Administrator Guide, available with the SmartChain Mobile Manager application.◆For information about the Intermec device, refer to the Intermec 751G Computer with Alphanumeric Keypad User’s Manual on the provided CD.
For More InformationSavi Mobile Reader SMR-650 User Guide 13Contacting Savi SupportIf you cannot find the information you need, contact Savi Support.◆Check www.savi.com/services/su.contact.shtml for contact information.◆Send email to help@savi.com.◆Call 1-888-994-SAVI (North America only) or 1-408-743-8888 between 9 a.m. and 5 p.m. Pacific time.When you contact Savi Support by telephone or email, have the following information available:◆Contact information (company name, your name, email, and phone number)◆Problem description◆Product type◆Software version◆Serial number or license information
CHAPTER 1About the Savi Mobile Reader SMR-650 and Mobile Computer14
CHAPTER 2Savi Mobile Reader SMR-650 User Guide 15Assembling and Using the Intermec Holster2Inserting the Mobile Device into the HolsterAs you follow these steps, refer to the corresponding photos on the next page.1. Buckle the waist strap around your waist.2. Buckle the leg strap around the middle of your thigh.3. Adjust the waist and leg straps for a secure fit.4. Turn the mobile device upside-down. Ensure that the unit is vertical.5. Insert and slide the mobile device into the holster.
CHAPTER 2Assembling and Using the Intermec Holster16Figure 2-1 Inserting the mobile device into the holsterFor the instructions that correspond to these photos, see “Inserting the Mobile Device into the Holster” on page 15.42351
CHAPTER 3Savi Mobile Reader SMR-650 User Guide 17Recharging Batteries3Recharging the SMR-650-212 Reader BatteryThe SMR-650-212 Reader has a Lithium-Ion internal battery that is not replaceable. To recharge the SMR-650-212 Reader battery, use the power cable and power supply with the 1/8-inch (3.2 mm) jack that Savi provides.You can also use the power cable, power supply, and Intermec dock to recharge the mobile device. Recharging both units simultaneously using the Intermec dock is the preferred method.1. Ensure that your SMR-650-212 Reader is securely connected to the Intermec 751G/A Mobile Computer.Note:The LF transmitter of the mobile reader is not functional when it is recharging.2. Plug the 3-prong connector of the power cable into an active power unit.
CHAPTER 3Recharging Batteries183. Connect the female end of the power cable to the Intermec power supply.4. Connect the other end of the power supply to the AC adapter on the dock.Connect female end of the power cable to the power supply
Recharging the SMR-650-210 and SMR-650-213 Reader BatterySavi Mobile Reader SMR-650 User Guide 195. Insert the mobile device into the dock.The battery of the reader and mobile computer are fully charged after three to four hours.Recharging the SMR-650-210 and SMR-650-213 Reader BatteryThe Lithium-Ion internal battery for the SMR-650-210 and SMR-650-213 Readers is not replaceable. To recharge the battery, use the power cable and power supply with the 1/8-inch (3.2 mm) jack that Savi provides. 1. Ensure that your SMR-650-210 or SMR-650-213 Reader is NOT connected to your desktop or notebook computer.Note:The LF transmitter of the mobile reader is not functional when it is recharging.2. Plug the 3-prong connector of the power cable into an active power unit.
CHAPTER 3Recharging Batteries203. Connect the female end of the power cable to the mobile reader power supply.4. Connect the other end of the power supply to the mobile reader.Determining Available Battery PowerYou can determine the percentage of battery power available based on the activity of the green LED on the SMR-650 Reader.Wall adapter Application running(COM port open)Green LED activity pattern Percentage of battery power availablePlugged in Not applicable flash, flash, off for two seconds, flash, flash, off for two secondsLess than 90%Plugged in Not applicable flash, off for two seconds, flash, off for two secondsGreater than 90%Unplugged Yes flash, off for five seconds, flash, off for five secondsGreater than 20%Unplugged Yes flash, flash, off for five seconds, flash, flash, off for five secondsLess than 20%Unplugged Application running, no activityLight is completely off; battery is discharged0%Connect female end of the power cable to the power supplyConnect this end of the power supply to the mobile reader
CHAPTER 4Savi Mobile Reader SMR-650 User Guide 21Printing Labels4You can print labels using the serial interface cable (Zebra Pt# 52712). Before you attempt to print using the Savi Mobile Reader SMR-650, verify that the Zebra printer is in proper working order by printing a test label. See the Zebra user’s guide for instructions.This chapter applies to kits that include the portable Zebra printer, boot for the printer, and serial cable with an RJ-45 and DB-9 connector for hardware accessories.Note:For information about how to print labels, verify which software you have preinstalled on your mobile device and refer to the Savi SmartChain Mobile Manager Pocket User Guide, Guide to SmartChain for Mobile Devices, or the Guide to SmartChain Transportation Security System for Mobile Devices.
CHAPTER 4Printing Labels22Connecting the Printer to the Mobile DeviceYou connect the printer to the mobile device using the Intermec boot. You can also use the Intermec dock to connect to the mobile device.Using the Intermec Boot to Connect to the Mobile Device1. Retrieve the network cable with a DB-9 and RJ-45 connector.2. Connect the Intermec boot to the bottom of the mobile device.
Connecting the Printer to the Mobile DeviceSavi Mobile Reader SMR-650 User Guide 233. Connect the DB-9 connector to the bottom of the boot.4. Insert the RJ-45 connector to the printer port.5. Use the software on your mobile device to print labels.
CHAPTER 4Printing Labels24Using the Intermec Dock to Connect to the Mobile Device1. Retrieve the network cable with a DB-9 and RJ-45 connector.2. Connect the DB-9 connector to the Intermec dock.
Connecting the Printer to the Mobile DeviceSavi Mobile Reader SMR-650 User Guide 253. Insert the RJ-45 connector to the printer port.4. Insert the mobile device into the dock.5. Use the software on your mobile device to print labels.
CHAPTER 4Printing Labels26
APPENDIX ASavi Mobile Reader SMR-650 User Guide 27SMR-650 Reader SpecificationsASpecification DescriptionPhysical characteristicsLength: 6.25 inches (15.88 cm) including antenna and cableWidth: 2.5 inches (6.35 cm)Height: 1 inch (2.5 cm)Weight: 6.4 ounces (181 g) with clipEnvironmentStorage temperature: –4°F to +140°F (–20°C to +60°C) ambientOperating temperature: –4°F to +140°F (–20°C to +60°C) ambient; 32°F to +104°F (0°C to +40°C) when chargingHumidity: 5 to 95% non-condensing. IP64 compliant.Altitude: Maximum is 40,000 feet (12,192 m); rate of change is 2,000 feet (610 m) per minute
APPENDIX ASMR-650 Reader Specifications28RF receiver/transmitterUltra High Frequency (UHF) receiver and transmitter (downlink and uplink):Frequency: 433.92 MHzRange: UHF read/write (symmetrical) range of up to 200 feet (61 m) line of site to SaviTag ST-6XX series and SaviTag ST-41X seriesModulation: Frequency shift keying, deviation +/- 50 KHzData rate: 27.8 Kps, 50% duty cycleAir protocol: Batch Collection System (BCS) and Extended Batch Collection System (EBCS) commands; Savi EchoPoint™ Air Protocol 2.1 (two-way UHF commands and seal extension commands)Data coding: ManchesterRx Signal Strength Indicator (RSSI): RSSI logic enables software to implement a search function that can poll a tag within range to determine tag proximityRF communication: Yellow LED flashes to indicate receipt of valid packetMaximum transmit power: 0.6mWSecurity: Password-protected communication with SaviTag ST-6XX seriesError detection: 16-bit CRCWakeup signal: 31.25 KHzLF transmitter for tag commissioningLow Frequency Transmitter (downlink):Frequency: 123 KHzRange: Up to 3 feet (.91 m) with SaviTag ST-6XX seriesModulation: Amplitude shift keying (on-off)Data rate: 1.6 Kps, 50% duty cycleAir protocol: Savi EchoPoint Air Protocol 1.1Data coding: Pulse Code ModulationError detection: 8-bit CRCNetworkInterface: Interface back to network requires mobile computer to be enabled with wireless or wired docking stationProtocol: Universal Data Appliance Protocol (UDAP) used to communicate with Savi SmartChain Site Manager MemoryOn board non-volatile memory of 256 KB for tag data (up to 500 records)
Savi Mobile Reader SMR-650 User Guide 29Tag compatibilitySaviTag ST-6XX series and SaviTag ST-41X seriesInterfacesSMR-650-212: Cable with Intermec proprietary interface and overmolded connectors. Cable is approximately 5 inches (12.7 cm) in lengthSMR-650-210 and SMR-650-213: Cable with serial DB-9 interface. Cable for SMR-650-210 is approximately 1 foot (30.48 cm) in length. Cable for SMR-650-213 is approximately 9 feet (2.74 m) in length.RS-232 InterfaceData rate: 19.2 KpsFlow control: CTS, half duplex communication, DTR for switching between standby and active modesData format: 8 data bits, non-parity, 1 stop bitSignals: TXD, RXD, DTR, and CTSAntennaExternal UHF: 50 Ohms matched external helical antenna (attached using SMA connector)Integrated (LF): Ferrite CoreShock and vibrationShock: Drop from 4-foot (1.22 m) height on the concrete floor in accordance with IEC 68 Series (MIL-STD-810E Method 514.4 Category 10), mechanical shock, transit drop methods 516.4 per National Safe Transit Association (NSTA) project 1A.Vibration: Random vibration, 3 axis, 60 minutes each axis MIL-STD-810E Method 514.4 Category 10 Procedure 1 MinimumProtection typeSealed to IP64 (protection against objects larger than 1mm (.04 inches) in diameter and protection from water falling as much as 15 degrees from vertical)
APPENDIX ASMR-650 Reader Specifications30PowerPrimary: Rechargeable and non-replaceable Li-Ion battery (3.7V @ 420mAh up to approximately 500 recharging cycles (80% or more of full battery capacity))Battery capacity: Approximately 3 to 4 days of continuous operation based on the following usage:✦8 hours per day with a single tag detection every 30 seconds (120 times in 1 hour)✦Transmitter is active for 300 milliseconds during single detection✦UHF receiver is active for 10 seconds during each detectionCharging: 120 mA maximum charge current required. 3 to 4 hours to charge Li-Ion battery with AC adapter. AC adapter has an input range of 100 to 240 VAC and an output of 5V +/- 10% regulated at maximum 1 AmpNOTE: Inactive DTR line or disconnected serial link automatically puts unit in standby mode to conserve battery lifeBattery status LED: Green status LED indicates various battery operating modesReset contacts: Reset contacts in pinholes resets the mobile reader and flashes green battery status LED and yellow RF communication LED to indicate reset processRegulatory approvals Radiated emission (intentional): U.S. emission standards as contained in FCC Part 15, Canada RSS-210, and European Community emission standards as contained in EN 300 220 (433 MHz) and EN 300 330 (123 KHz)Electromagnetic emission: ESD complianceExposed to 8 kV air discharge or 4 kV contact discharge in accordance with EN 301 489-1Radiated immunity (unintentional): U.S. emission standards as contained in FCC Part 15 and European Community immunity standards as contained in EN 301 489-1Safety approval:AC adapter: U.S. UL 60950; CSA C22 950; European EN 60950;Savi Mobile Reader SMR-650: US. UL 1604 approved for use in hazardous locations Division 2 Class I Groups A, B, C, and D, Class II Groups F, G, Class III; European EN 60950Ordnance safety: HERO tested
Savi Mobile Reader SMR-650 User Guide 31Mobile computer mountingMounting hardware and bracket attaches the SMR-650-212 Reader to the Intermec 751G/A Mobile Computer. Includes holsterOptionsSMR-650-212 for use with Intermec 751G/A Mobile Computer; SMR-650-210 and SMR-650-213 with DB-9 connectors for use with notebook and desktop PCsSoftware requirementsSMR-650-212 requires SmartChain Mobile Manager, SmartChain for Mobile Devices, or SmartChain Transportation Security System for Mobile Devices; SMR-650-210 and SMR-650-213 require SmartChain Client Tools
APPENDIX ASMR-650 Reader Specifications32
APPENDIX BSavi Mobile Reader SMR-650 User Guide 33Hardware ComponentsBThe SMR-650-212 is packaged in kits that include the following items:◆Intermec model 751G/A handheld terminal with alpha keypad, 802.11G radio (model 751G-Kit-C-101x only), and 2D imager*◆256 MB memory card (SD format)◆Operational and spare battery (two batteries total)◆Operational and spare stylus ◆Charger/communications dock (USB, serial)◆Universal Power Supply◆USB interface cable◆Intermec 751G Computer with Alphanumeric Keypad User’s Manual◆Power cord◆Intermec holster and shoulder strap* Model 741G-Kit-C-101x includes a batch Intermec 751G/A Mobile Computer and model 751G-Kit-C-101x includes a Wi-Fi Intermec 751G/A Mobile Computer
APPENDIX BHardware Components34SMR-650-212 Reader Components◆Custom Intermec cable◆Rechargeable Lithium-Ion battery (internal and non-removable)◆AC adapter to recharge the mobile reader internal batteryFigure B-1 SMR-650-212 ReaderSMR-650-210 and SMR-650-213 Reader Components◆Rechargeable Lithium-Ion battery (internal and non-removable)◆AC adapter to recharge the mobile reader internal batteryFigure B-2 SMR-650-210 and SMR-650-213 ReaderSMR-650-212 Reader with customIntermec cableSMR-650-210 and SMR-650-213 Reader with DB-9 connector

Navigation menu