Samsung Electronics Co NP-Q1 Mobile PC User Manual SAMSUNG Q1

Samsung Electronics Co Ltd Mobile PC SAMSUNG Q1

Contents

Users Manual 1a

1 User’s Guide
Product Features 2 Product FeaturesaSmall but Strong UMPC (Ultra Mobile PC)● Intel Celeron M ULV Processor● 256MB~Up To 1GB DDR2 Memory● 1.8", 20~60GB High-Capacity Hard Disk Drive7" WVGA TFT LCD● Basic Resolution of 800x480 Pixels, Maximum Resolution of 2048x1536 Pixels (when an external display is connected)● Auto Scaler (Automatic Resolution Adjustment) Function to Support High Resolution Output● Easy-to-Use Touch Screen usable with your fingers.Microsoft Windows XP Tablet PC Edition● Resolve PDA and Pocket PC restrictions● Usability Similar to a Normal PC with WindowsPowerful Multimedia Functions● Various Multimedia Programs Such as AVStation etc.● 2 Built-in Array Microphones for Higher Audio Recording Quality SRS Surround SoundMultiple Network Support● Wired LAN, Wireless LAN, Bluetooth (Optional)● Resolves Space Restrictions through the Wireless Communication FunctionCompact, Light-Weight Design for Portability / Polished Design● A mere 779g (Without the Bluetooth modules)● High-Gloss Front PanelOptional Accessories for Additional Convenience● USB Data Cable Enabling Data Exchange with another PC.● USB External ODD, Ultra-Slim USB External Keyboard● Power Bank to Extend Use Time
Using Your Document 3 Using Your DocumentCongratulations on your purchase of a notebook computer with the Windows® XP operating system. Whether you are new to using a portable computer or are an experienced user, this user’s manual can help you get the most from your computer.Manual Documentation ConventionsInformation IconsThree icons and their associated messages appear in this manual. The information icons are placed before the step/information they apply to:Warning:Indicates the possibility of personal injury.Caution:Warns you of possible damage to equipment or data.Note:Informs you of special circumstances.Technical Information:Informs you of special requirements or limitations for use of item(s).Keyboard ConventionsKeys that you need to press to perform certain functions are displayed in the manual in brackets. For example: <Ctrl> indicates the control key (Ctrl on the keyboard).If you need to press two keys at the same time, the key names are shown joined by a plus sign. For example:<Fn+F8> means that you should press the Fn key and hold it and then press the F8 key.CD-ROM Device Naming ConventionIn many installation programs you will have to get a program from the CD-ROM device. The program installation sequence assumes that the CD is drive d: , however this is not always ₩the case. The name of the CD-ROM drive is the letter following the letter assigned to your last HDD. For instance, if you have one HDD with two partitions, the HDD is drives C: and D: and the CD-ROM drive is then drive E.
Using Your Document 4 Some devices and software may differ from the descriptions in the User's guide or may not be supplied with the product depending on your computer model.The actual appearance of the computer may differ from the pictures printed on the cover and in the User's guide.This manual describes procedures with both the Stylus Pen and Mouse.'Single-Click' in this manual also means 'Single-tap' for the Stylus Pen.Software User DocumentationYour computer is shipped from the factory with several software programs installed. The software may include its own online or printed documentation. Refer to the documentation or the Help options in the software for more information.The figures and illustrations in this manual may not be identical to those on your system.General Icon Note:Some of the Icons used in Windows XP may be placed on the taskbar by selecting (ex: Place the volume icon in the taskbar) in the properties dialog box.
Contents 5ContentsProduct Features 2Using Your Document 3Manual Documentation Conventions 3Contents 5Chapter 1. Getting StartedOverview 8Front View / Status Indicators 8Top View 9Right View 10Left View 10Rear View 11Turning the Computer On and Off 12To turn on the computer 12To turn off the computer 12Chapter 2. Using the ComputerStylus Pen 14Entering Text 16Using the Tablet PC Input Panel 16Dialkeys 19Volume Control 20Using the Buttons 21The Menu Button 21The Quick Launch Button 22The Auto Scaler Button 24CF Card Slot 25Connecting a Monitor 27Connecting a Monitor 27Viewing on a Monitor 27Dual View 28Chapter 3. Introducing WindowsAbout Microsoft Windows XP 31Get Going with Tablet PC 31Tablet PC Tutorials 32Reinstalling Windows XP 32The Windows XP Screen Layout 33Desktop 33Understanding the Start Menu 34Understanding a Window 35Control Panel 36Opening the Control Panel 36User Account 37Changing the Resolution and Colors 39Chapter 4. Connecting to the InternetConnecting Through a Wired LAN 41Connecting Through a Wireless LAN 43Wireless Network Setup Using the Wireless LAN Setup Program 48Using Samsung Network Manager 49Using the Network 49Using the network after moving location 52Sharing Internet Access 53Network Status Diagnosis 56Using Bluetooth Devices 57Bluetooth Software Setup 57Using Bluetooth 60
Contents 6Chapter 5. Using ApplicationsIntroducing Programs 65Using Samsung Update Plus 67Program Launcher 69Program Launcher Screen Layout 69Using Program Launcher 70Using AVStation premium 71Start and Screen Layout 71MUSIC Station 72PHOTO Station 74MOVIE Station 78Using AVStation NOW / AVStation Viewer 82Start / Exit AVStation NOW 82Start / Exit AVStation Viewer 83Screen Layout 84MUSIC Station 85MOVIE Station 87CyberLink PowerDVD 89Voice Recorder 91Recording 91Chapter 6. Customizing Your ComputerUsing System Setup 94Starting System Setup 94System Setup Screen 95Setting a Booting Password 97Changing the Booting Priority 100Using the Battery 101Removing and Attaching Battery 101Charging the Battery 101Monitoring the Battery Charge 102Extending the Battery Usage Time 104Tips for Using Your Computer 107Travelling with Your Computer 108Handling Spills 108Storing the Computer for Long Periods 108Chapter 7. Troubleshooting / AppendixUsing Magic Doctor 110Using Norton AntiVirus 111Restoring the System 112Reinstalling Software 115Reinstalling Windows XP 117Running the System Recovery Media 117Quick Installation 118Standard Installation 118Installing Windows When You Cannot Run Windows 120Questions and Answers 121Windows Related 121Display Related 121Sound Related 123Wired LAN Related 124Wireless LAN Related 125Games and Programs Related 129Security Center 131Other 133Specifications 134System Specification 134Wireless LAN Specification (Optional) 135Abbreviations 136Glossary 138Index 142
7 Chapter 1. Getting StartedOverview 8Front View / Status Indicators 8Top View 9Right View 10Left View 10Rear View 11Turning the Computer On and Off 12To turn on the computer 12To turn off the computer 12
Overview 8 OverviewBefore You Start!An item marked with (*) may be replaced by another item or may not be supplied with your computer depending on the model.The actual appearance and color of the contents may differ from the pictures used in the material.Front View / Status Indicators, Enter Buttonx Speaker(L) z LCDb Status Indicators n Microphonex Speaker(R)c Joystick v Auto Scaler Buttonm Menu Button. Quick Launch ButtonzLCD The screen images from the computer are displayed here.xSpeaker Used to generate sound.cJoystick Plays the same role as the direction keys ( ←,→,↑,↓) on the keyboard.Used as a joystick when playing games.vAuto Scaler Button (Automatic Resolution Adjustment Button)Press this button to change the screen resolution. Auto Scaler provides 3-step resolutions. Whenever you press this button, the screen resolution changes to 800x480 Default Resolution > 800x600 > 1024x600 sequentially. (Page 32)bStatus Indicators Shows the operating status of the computer. The corresponding operating LED is lit when the corresponding function operates. (Page 17)nMicrophone Used to record sound. (Page 104)mMenu Button Press this button to launch the Menu Program. (Page 29) The Menu Program provides shortcuts to frequently used functions on the computer. You can easily change the settings.,Enter Button Press this button to select an item. It is the same as the Enter key on the keyboard..Quick Launch Button You can register a frequently used program to launch it just by pressing this button. (Page 30)
Overview 9 Status Indicatorsx Wireless LAN z HDD v Power Statusc Charge StatuszHDD This turns on while the hard disk drive is being accessed.xWireless LAN This turns on when the wireless LAN is operating. (Page 53)cCharge Status This shows the power source and the battery charge status.Green: When the battery is fully charged or the battery is not installed.Amber: When the battery is being charged.Blinks: When pressed other button in HOLD status.Off : When the computer is running on battery power without being connected to AC power.vPower Status This shows the computer operating status.On : When the computer is operating.Blinks: When the computer is in Standby mode.Top Viewz Wired LAN Port c Windows Security Buttonv Power Switch / AVStation NOW Switchn Stylus Pen / Stylus Slotx CF Card Slot b VentszWired LAN Port A port to which an Ethernet cable is connected; connects the computer to a LAN. (Page 50)xCF Card Slot A slot into which a CF card is inserted. (Page 33)cWindows Security Button Pressing this button is the same as pressing the <Ctrl>+<Alt>+<Del> keys on the keyboard.vPower Switch / AVStation NOW SwitchYou can turn the computer on or off by sliding this switch to the right and releasing it. (Page 20)You can launch AVStation NOW by sliding this switch to the left when the computer is turned off. (Page 87)To turn the computer on, slide the Power switch to the right and hold it for more than 0.1 seconds before releasing it.bVents The internal heat of the computer is emitted through these holes.If the vents are blocked the computer may over-heat. This may be dangerous so avoid blocking the vents.nStylus Pen / Stylus Slot The Stylus is used to enter information through the touch screen. (Page 22)You can keep the Stylus Pen in the Stylus Slot.
Overview 10 Right ViewzxczMonitor PortA port used to connect a monitor, TV or projector supporting a 15-pin D-SUB interface. (Page 34)xUSB PortA port used to connect a USB device such as a USB keyboard, mouse, etc.cDC-in JackA port used to connect the AC adapter supplying power to the computer.Left ViewzxcvbnzUSB External ODD Power PortA port used to supply power to the external USB ODD.xUSB PortA port used to connect a USB device such as a USB keyboard, mouse, USB ODD, etc.cHeadphone JackA jack used to connect the headphones.vVolume Control ButtonA button used to control the volume. (Page 28)bHOLD SwitchIf this switch is in the HOLD position (upside), none of the buttons will function.If the computer enters HOLD mode, the Lock icon appears on the screen for a moment and the Charge LED ([ICON]) blinks for a moment.To release HOLD mode, slide the HOLD switch downwards.nHand Strap HoleYou can connect the Hand Strap here.
Overview 11 Rear Viewx 80° Standz 20° Standc Battery Latchv Batteryz20° Stand You can position the computer at a 20° degree angle so that you can comfortably enter texts.x80° Stand You can position the computer at an 80° degree angle so that you can comfortably view the screen.cBattery Latch The latch used to remove or install the battery. (Page 112)vBattery A Lithium Ion rechargeable battery which supplies power to the computer. (Page 112)
Turning the Computer On and Off 12 Turning the Computer On and OffTo turn on the computer1Install the battery and connect the AC adapter. (Refer to the Getting Started Guide.)2Adjust the stand at the back of the computer at a comfortable angle.3Slide the Power Switch to the right, hold it for more than 0.1 seconds and then release it. The computer is turned on.When running the computer on battery power, the LCD brightness is automatically dimmed to save battery power.To increase the LCD brightness, press the Menu button and press Brightness Up. (Page 29)To turn off the computer1Click the start button ( ) on the taskbar.2Click Turn Off Computer.3Click Turn Off. When the system cannot be shut down due to a system error, turn it off by sliding and holding the Power Switch for more than 4 seconds.After that, when turning it on by sliding the Power Switch, the disk checking program may launch.
Turning the Computer On and Off 13 Chapter 2. Using the ComputerStylus Pen 14Entering Text 16Using the Tablet PC Input Panel 16Dialkeys 19Volume Control 20Using the Buttons 21The Menu Button 21The Quick Launch Button 22The Auto Scaler Button 24CF Card Slot 25Connecting a Monitor 27Connecting a Monitor 27Viewing on a Monitor 27Dual View 28
Stylus Pen 14 Stylus PenA Stylus Pen is used instead of mouse and provides the same function.Before You Start!It is recommended to connect and use a USB keyboard and mouse when using the computer for a long time.Taking the Stylus Pen OutPull the Stylus Pen upwards.When finishing using the pen, return it to the Stylus Slot.Stylus Pen FunctionsMouse Stylus Pen FunctionSingle-click Single-tap Single-tap with the pen to select an item.Double-click Double-tap Double-tap with the pen to run an item.Right-click Press and Hold Press and hold for more than 3 seconds with the pen to display the Pop-up menu.Drag Drag Press an item and drag it with the pen to move the item.Learning How to Use the Stylus PenSelect Start > Get Going with Tablet PC to learn how to use the Stylus Pen. (Page 38)
Stylus Pen 15 Calibrating the Stylus PenWhen using the Stylus Pen for the first time or the pointing position of the Stylus Pen is incorrect, you can correct the pointing position using the TouchKit program.1Select Start > All Programs > Touchkit > Configure Utility.2In the Tools tab, press the 4 Points Calibration.Enhancing the AccuracyIf a more precise correction is required, you can correct the pointing position by using 9-Points or 25-Points Calibration.z In the Linearization Style item in the Settings tab, select 9-Points or 25-Points and then press the Apply button.x In the Tools tab, press Linearization. The higher the number, the more precise a correction is provided.3Press and hold the X-symbol displayed on the screen until it stops blinking. The X-symbol appears repeatedly according to the selected number of points.4If the Calibration Result window appears, click the OK button. The pointing position of the Stylus Pen is corrected.
Entering Text 16 Entering TextYou can enter texts by using the Tablet PC Input Panel or DialKeys on this computer.Before You Start!Using a USB keyboard is more convenient over long periods of use.For example, to enter texts in Notepad, select Start > All Programs > Accessories > Notepad and run Notepad.Using the Tablet PC Input PanelThe Tablet PC Input Panel is an on-screen letter input pad provided by Windows. Using it, you can enter letters with the Stylus Pen when a keyboard is not available. You can enter letters using the Tablet PC Input Panel in 3 ways.Click on the Tablet PC Input Panel ( ) icon on the taskbar.Writing Pad CloseTools and OptionsHelpYou can learn detailed usage for the Tablet PC Input Panel.Character PadOn-Screen KeyboardTablet PC Input Panel iconEntering text using the Writing PadYou can enter text on the Writing Pad using the Stylus Pen.1In the Tablet PC Input Panel, click the Writing Pad icon ( ).2Write text in the input area of the Writing Pad with the Stylus Pen and wait a moment. The written letters are converted into the corresponding computer characters. Press the Insert button to enter the converted letters.Insert
Entering Text 17 Editing LettersOverwrite wrong letters or press the lower part of a letter to select another letter from the displayed letters.Entering text using the Character PadYou can write a letter in each cell of the Character Pad with the Stylus Pen.1In the Tablet PC Input Panel, click the Character Pad icon ( ).2Write a letter in the cell of the Character Pad with the Stylus Pen and wait a moment. The written letter is converted into the corresponding computer character.Press the Insert button to enter a converted letter.Insert
Entering Text 18 Entering text using the On-Screen KeyboardThe On-Screen Keyboard displays a standard keyboard on the screen so that you can enter a letter by pressing the corresponding key on the screen.1In the Tablet PC Input Panel, click the On-Screen Keyboard icon ( ).2Press a letter on the screen with the Stylus Pen.
Entering Text 19 DialkeysDialKeys is an on-screen keyboard designed to be used with compact touch screen computers.You can enter letters using the DialKeys by pressing a key on the screen with your thumbs while holding both of the lower corners of the computer with your hands.1Click on the Dialkeys icon ( ) on the taskbar for more than 3 seconds and select Show/Hide DialKeys from the pop-up menu. 2Dialkeys appears on both lower corners of the screen. Enter letters using your thumbs.Corresponds to the Enter key on a keyboard. Corresponds to the space bar on a keyboard.Minimizes the Dialkeys.Corresponds to the Backspace on a keyboard.Move the current window upwards.To View Detailed Usage of the DialkeysClick on the Dialkeys icon ( ) on the taskbar for more than 3 seconds and select Help from the pop-up menu.
Volume Control 20 Volume ControlYou can control the volume with the Volume Control button or Volume Control program.Using the Volume Control with the Volume Control ButtonPress the top of the Volume Control Button ( ) (+) to turn up the volume or press the bottom of the button (-) to turn down the volume.Using the Volume Control with the Volume Control ProgramClick on the Volume icon ( ) on the taskbar and slide the volume slide bar up or down.Alternatively, double-click on the Volume icon ( ) and adjust the master volume control.
Using the Buttons 21 Using the ButtonsThe procedures to use the Menu, Quick Launch and Auto Scaler buttons are described below.The Menu Button ( )Press the Menu button to launch the Menu Program. The Menu Program provides shortcuts to frequently used functions on the computer. You can easily change the settings.Press the Menu button again or press a point on the screen to hide the Menu Program.Menu Items FunctionBrightness Up Whenever this item is pressed, the LCD brightness is increased by one step.Brightness Down Whenever this item is pressed, the LCD brightness is decreased by one step.Wireless LAN ON (OFF) Press this item to turn the Wireless LAN on or off.Wired LAN ON (OFF) Press this item to turn the Wired LAN on or off.Sound ON (OFF) Press this item to turn the volume on or off.Backlit OFF Press this item to turn the LCD backlight off. To turn it on again, press a point on the LCD screen once.
Using the Buttons 22 The Quick Launch ButtonYou can register a frequently used program to launch the program, just by pressing this button.The procedures to change the default settings are described below.Default SettingQuick Launch button is defined as follows by default.Button Function Descriptionu1 Mouse Scroll Up Scrolls up in the current window.u2 Back Moves to the previous page in Internet Explorer or Windows Explorer.u3 Mouse Scroll Down Moves to the next page in Internet Explorer or Windows Explorer.Scrolls down in the current window.u4 Forward Scrolls down in the current window.LCD/CRTPress the item to view screen images on an external monitor.When pressing this item once, screen images are displayed on the LCD. When pressing this item twice, screen images are displayed on both the LCD and the CRT (external monitor) simultaneously.CRT Output Only is not supported.SRSPress this item to set up the SRS function.SRS provides surround sound even with 2 speakers by extending the space perception.Whenever this item is pressed, the following function is selected.WOW XT: For listening to music.Trusurround: For watching movies.SRS OFF: Turns the SRS function off.Battery Shows the remaining battery charge.RotationWhenever this item is pressed, the screen rotates by 90 degrees.■ When rotating the screen, a part of the screen image may not be displayed in some software programs.■ Since the Rotation function is supported for the 800x480 pixels resolution only, if the Rotation function does not work when pressing the item, set the screen resolution to 800x480 pixels first by pressing the Auto Scaler button.
Using the Buttons 23 Changing the SettingsThe procedures to change the default settings are described below.1Double-click the Magic Keyboard icon ( ) on the taskbar.2Click the add button.3Enter a name in the Group Name field and select a shortcut key in the Select Shortcut Key field.4Select the Run Program option, click the Browse button, select a program to be launched and click the Open button.Example) C: Program Files Internet Explorer IEXPLORE₩₩ ₩To use the keyboard shortcut function, select the Keyboard Effect option and then define a shortcut key combination.5Click the Apply button and click the OK button to complete the settings.
Using the Buttons 24 The Auto Scaler ButtonThe default resolution of this computer is 800x480 pixels. In the default resolution, the complete screen image of programs designed for high resolutions may not be displayed properly. In this case, press the Auto Scaler button(Automatic Resolution Adjustment Button) on the left side of the computer and select a higher screen resolution.When pressing the Auto Scaler button, the Auto Scaler menu appears. Whenever this button is pressed, the screen resolution changes to 800 x 480 (Default Resolution) > 800 x 600 > 1024 x 600 sequentially.Example) Selecting a 800 x 480 pixels resolutionExample) Selecting a 800 x 600 pixels resolutionThe Auto Scaler button provides a function that fits high resolution screen images to the screen size and does not support all resolutions supported by the graphics chipset. To select a resolution, which is not supported by Auto Scaler, use the Display Properties. (Page 46)About the 1024X768 Pixels ResolutionThe 1024x768 pixels resolution is also fitted to the screen size. You can select the 1024X768 pixels resolution by selecting the Start > Control Panel > Appearance and Themes > Display > Setting tab. (Page 46)
CF Card Slot 25 CF Card SlotA CF card slot is provided so that you can use CF cards. A CF card is a removable storage device that can be used to exchange data with digital devices such as a digital camera, PDA, etc. conveniently.Before You Start!This computer supports CF card types I and II.Using the Card1Insert a card into the slot in the correct direction.2The card drive appears. If it does not appear, click Start > My Computer.3Double-click the removable disk and you can save, move and delete files on and to the card.You can only use a formatted card. If it is not formatted, refer to the descriptions for'Formatting a Card'.Removing the CardHold the end of the CF card and take it out.
CF Card Slot 26 Formatting the CardYou have to format a card first to use it.If a card is formatted, all data will be deleted. Before formatting a card, please backup your data.1Select Start > My Computer.2Press a removable disk with the Stylus Pen for more than 3 seconds and select Format from the pop-up menu.3Click the Start button to begin formatting the card.To use a CF card on both a computer and another digital device such as a digital camera, it is recommended formatting the memory card in the digital device. When formatting the memory card in the computer, you may have to format the memory card for the other digital device again to use the memory card with that device.
Connecting a Monitor 27 Connecting a MonitorUsing an external display device is useful when you are giving a presentation or watching a movie through your TV.Connecting a MonitorOpen the Monitor OUT port cover by pulling the groove of the cover and connecting a monitor.Viewing on a Monitor1Press the Menu button.2Press the LCD/CRT item once to display screen images on the LCD screen.When pressing the item twice, you can view screen images on both the LCD and CRT screens simultaneously.LCD: Computer ScreenCRT: External Monitor ScreenOutputting to CRT only is not supported.
Connecting a Monitor 28 Dual ViewDual View is a function that enables you to view a computer screen over two display devices.The Menu button does not support Dual View mode. You have to use the 'Display Properties' of Windows to use Dual View.When using Dual View, use a USB mouse.Using a mouse to move between screens is convenient. You cannot move between screens with the Stylus Pen.Using Dual View to View an Extended ScreenCheck if an external display device has been properly connected and configure Dual View.1Select Start > Control Panel > Appearance and Themes > Display.2Click the Settings tab.3Click the monitor '2' icon, select the 'Extend my Windows desktop onto this monitor' check box and click Apply and then the OK button.4If you have set the LCD as the primary display device, the primary display device (the LCD) is indicated as '1', and the secondary display device is indicated as '2'. Now you can view the screen through two monitors.It is recommended setting the LCD screen as the primary device ('1') when using Dual View.
Connecting a Monitor 29 If the screen of the secondary display device is displayed at 640x480 pixels with 256 colours, select Start > Control Panel > Appearance and Themes > Display > Settings tab > Monitor 2 and change the settings to the desired screen resolution and colour quality.To Move a Window between Monitors in Dual View ModeClick and hold a window title bar on the primary display device ('1') with the mouse and drag the window title bar to the secondary display device ('2') to move the window.Deactivating Dual View Mode1Select the Start > Control Panel > Appearance and Themes > Display > Settings tab.2Click the monitor '2' icon, unselect the 'Extend my Windows desktop onto this monitor' check box and then click Apply.
Connecting a Monitor 30 Chapter 3. Introducing WindowsAbout Microsoft Windows XP 31Get Going with Tablet PC 31Tablet PC Tutorials 32Reinstalling Windows XP 32The Windows XP Screen Layout 33Desktop 33Understanding the Start Menu 34Understanding a Window 35Control Panel 36Opening the Control Panel 36User Account 37Changing the Resolution and Colors 39
About Microsoft Windows XP 31 About Microsoft Windows XP The Microsoft Windows XP Tablet PC Edition (hereafter, Windows) operating system is installed on this computer.Microsoft Windows XP Tablet PC Edition is an operating system to which additional features for the tablet PC, such as a hand-writing recognition function, have been added, on the basis of Microsoft Windows XP Professional, for the user's convenience.You can learn elementary functions for using this tablet PC through the Get Going with Tablet PC and Tablet PC Tutorials.The computer has adopted touch screens so that you can operate the computer with your hands and does not accord completely with the characteristics of a typical tablet PC.In addition, since a Stylus Pen is provided instead of a Tablet Pen, the Tablet and Pen Settings provided by the Windows XP Tablet PC Edition are not supported Pen Options completely.To calibrate the Pen, use the Toutchkit program. (Page 23)Get Going with Tablet PCSelect Start > All Programs > Get Going with Tablet PC.The Welcome to tablet computing screen appears. Click Start to learn how to use your tablet PC.
About Microsoft Windows XP 32 Tablet PC TutorialsYou can tour elementary functions of your tablet PC and learn how to hand-write on the Writing Pad through the Tablet PC Tour.Tablet PC Tutorials only supports the 1024x768 pixels resolution.Before running the Tutorials, select the Start > Control Panel > Appearance and Themes > Display > Settings tab and change the screen resolution to 1024x768 pixels.Select Start > All Programs > Tablet PC > Tablet PC Tutorials.The Tablet PC Tour screen appears. Click Next to learn how to perform 'Note Writing', 'Entering texts with the Tablet PC Input Panel', etc.Reinstalling Windows XPIf you cannot start up Windows due to damage to the system or errors frequently occur, you can reinstall Windows using the System Recovery Media (DVD). (Page 125)You can use the system recovery media by connecting the USB External ODD to the system.
The Windows XP Screen Layout 33 The Windows XP Screen Layout The screen layout of Windows XP Tablet PC Edition is the same as that of Windows XP.DesktopThe desktop is the working area on the computer. It consists of a large workspace anda taskbar at the bottom as shown in the figure below.c Taskbarv Language Barz Start b System Tray with Clockx Tablet PC Input PanelzStart Opens the Start menu.xTablet PC Input Panel The Input Pad used to enter letters.cTaskbar Running programs are displayed here.vLanguage Bar Switches the text input language.bSystem Tray with Clock Displays some program icons that are currently running.Infrequently used icons are hidden. When clicking the left arrow icon, hidden icons are displayed.
The Windows XP Screen Layout 34 Understanding the Start MenuThe Start menu includes everything that is required to start Windows. From the Start menu it is possible to run a program, open a file, assign system users with Control Panel, receive support by clicking Help and Support, and search desired items from the computer or Internet by clicking Search.My ComputerControl PanelHelp and SupportStart Button All ProgramsFrequently used programsMy Computer Displays the contents of the hard disk, the CD-ROM drive, the network drive(s), and floppy disks. It can also be used to search and open files and folders.Control Panel Enables users to configure settings on the computer.Help and Support Provides on-line help, information on Windows and troubleshooting.Search Enables users to search for information in files or the Internet.Run Run programs or documents.
The Windows XP Screen Layout 35 Understanding a WindowA window is the basic component in working with the computer. The My Computer window, which is a window for the computer's hard drive, will be used as an example here to show the basic composition of a window.Click Start > My Computer.Close ButtonMaximize ButtonMinimize ButtonDrive Icon (Storage Device)Title BarMenu BarQuick Task WindowFolder IconTool BarDouble-click the hard drive (local disk) to view internal folders and files stored in it. If the contents do not appear, click Show the contents of this folder.What is a drive?A storage device in which files and folders are saved in, and read from.What is a folder?A folder is used to group and manage files systematically, and may include files in sub-folders. It is similar to a bookshelf.What is a file?A file is a document or various kinds of material that is generated as a result of program operation. It is also called data.To view the entire structure of the driveClick the Folder icon in the taskbar to view the entire structure. Click again to return to the Quick Task Window.
Control Panel 36 Control PanelIn the Control Panel, tools to configure Windows are collected.Opening the Control PanelSelect Start > Control Panel.Icon Name FunctionAppearance and Themes Used to change the appearance of Windows.Using this function, you can change the Desktop, apply a theme and a screen saver to the computer, and change the Start menu and Taskbar.Network and Internet Connections Using this function, you can configure the network settings or configure and add Internet connections.Add or Remove Programs Using this function, you can add or remove a program from Windows.Sound, Speech and Audio Devices Using this function, you can adjust the volume, select a sound scheme, and set up speakers.Performance and Maintenance Using this function, you can set Windows performance options.In addition, you can manage the hard disk drive and hardware.Printers and Other Hardware Using this function, you can add or configure a printer, mouse, keyboard, scanner, camera, or gaming device, etc.User Accounts Using this function, you can add or set a Windows XP user account.Date, Time, Language and Regional Options Using this function, you can configure the date, time, language, regional settings.Accessibility Options Using this function, you can select options for weak-eyed and disabled persons.Security Center Using this function, you can check the current security status to protect the user's computer and configure the security settings for the firewall, virus anti-virus program, etc.
Control Panel 37 User AccountWindows XP allows each user to use a computer with his user account. The procedures to add a user account and switch between user accounts are described below.Adding a User Account1Select Start > Control Panel.2Double-click User Accounts and click Create a New account.3Click the Tablet PC Input Panel icon, enter a name and then click the Next button.4Select an account type, click Create Account, and then check the newly created account in the user account screen.If you cannot see the bottom of the screen, press and drag the scroll bar of the window with the Stylus Pen.5To change the user account information, click an account to be changed.You can change the account name, password, type and picture.
Control Panel 38 Deleting a User Account 1Select Start > Control Panel > User Accounts.2Click a user account to be deleted and click Delete Account.You cannot delete the current login user account.Switching Users1Select Start > Log Off.2Click Switch User.3Click a user account to login to the Start screen.Login with a new user account.
Control Panel 39 Changing the Resolution and ColorsThe resolution means the number of pixels displayed on the screen. When setting the resolution higher, items on the Desktop become smaller and more items can be displayed on the screen. The higher the color quality, the more colors are displayed on the screen.1Select Start > Control Panel > Appearance and Themes > Display.2Click Settings and change the Screen Resolution and Color Quality and then click OK.You can check your graphics chipset.To set the resolution, slide the resolution slide bar to a desired resolution in the Screen resolution field.To set the color quality, select a color quality in the Color quality field.•If 1024x768 or a higher resolution is selected, the entire screen is not displayed on the LCD screen. In this case, you have to move the mouse pointer up, down, left or right to view the hidden part of the screen image.•If the 800x480 resolution is not availableWhen selecting the 800x600 or 1024x600 resolution by pressing the Auto Scaler button, the 800x480 resolution may not appear in the Display Properties window. In this case, press the Auto Scaler button and select the 800x480 resolution.
Control Panel 40 Chapter 4. Connecting to the InternetConnecting Through a Wired LAN 41Connecting Through a Wireless LAN 43Wireless Network Setup Using the Wireless LAN Setup Program 48Using Samsung Network Manager 49Using the Network 49Using the network after moving location 52Sharing Internet Access 53Network Status Diagnosis 56Using Bluetooth Devices 57Bluetooth Software Setup 57Using Bluetooth 60
Connecting Through a Wired LAN 41 Connecting Through a Wired LANBefore You Start!You can also configure the network settings using the Samsung Network Manager. (Page 56)Before configuring the Wired LAN, you have to turn the Wired LAN on, if it is turned off.Press the Menu button and press the Wired LAN ON item to turn it on. 1Connect a LAN cable to the computer’s LAN port.2Click Start > Control Panel.3Click Network and Internet Connections in the [Control Panel] window.4Click Network Connections in the [Network and Internet Connections] window.5Right-click(press and hold the Stylus Pen for more than 3 seconds) the Local Area Connection icon and click Properties.6On the General tab, select “Internet Protocol(TCP/IP)” and click Properties.
zxConnecting Through a Wired LAN 42 7To use DHCP:On the General tab, select “Obtain an IP address automatically” and “Obtain DNS server address automatically”. Click OK.To use a static IP:On the General tab, select “Use the following IP address” and fill in the IP address, Subnet mask, Default gateway, Preferred DNS server, and Alternative DNS server fields. Click OK.To use both DHCP and static IP simultaneously:On the Alternate Configuration tab, click User configured and fill in the fields.Click OK.
Connecting Through a Wireless LAN (Optional) 43 Connecting Through a Wireless LAN (Optional)A wireless network (Wireless LAN) environment is a network environment that enables communication between multiple computers at home or a small-size office through wireless LAN devices.Using the wireless network connections between the systems, you can use normal network functions such as sharing of files, folders and printers. When a computer-to computer network has been established, a computer that is not connected to the Internet can share the Internet by accessing another computer connected to the Internet. For details, see “Sharing Internet Access” on page 53.A wireless LAN card is optional. The model of the wireless LAN card is determined by the relevant product.To view the installed wireless LAN card, click Start > Control Panel > Performance and Maintenance > System > Hardware tab > Device Manager.The wireless LAN connection settings will be described on the basis of the Windows XP Service Pack 2 installed computer.It is recommended using the default settings provided by Windows XP for the wireless LAN settings for Windows XP installed computers.To setup using the software supplied by the wireless LAN card manufacturer, refer to "Wireless Network Setup Using the Wireless LAN Setup Program" (p46).To use the Wireless LAN, you have to turn the Wireless LAN on first, if it is turned off. Press the Menu button and press the Wireless LAN ON item to turn it on. If the Wireless LAN is turned on, the Wireless LAN LED ( ) is lit.Wireless network connections can be classified into two categories.1) Access Point (AP) You can connect to an AP to use the network. This is possible only in an environment equipped with an AP. For details, see “Connecting to an Access Point (AP)” on page 44.What is an Access Point (AP)?An AP is a network device that bridges wired and wireless LANs, and corresponds to a wireless hub in a wired network. You can connect multiple wireless LAN installed computers to an AP.2) Computer-to-computer (ad hoc)This is also called a peer-to-peer network. In computer-to-computer wireless networks, you can wirelessly connect 2 or more computers that have wireless LAN modules. For details, see “Connecting to computer-to-computer networks (peer-to-peer or ad hoc)” on page 45.
Connecting Through a Wireless LAN (Optional) 44 Connecting to an Access Point (AP)This section describes how to connect to an AP. You can use the network when you are connected to an AP. For more detailed information such as the network key (encryption key), ask your network administrator.1Right-click(press and hold the Stylus Pen for more than 3 seconds) on the Wireless Network Connections ( ) icon on the taskbar, and select View Available Wireless Networks.2Select an AP (E.g. Test) to connect to and click Connect.If there is a configured network key for the AP to connect to, the Enter Network Key window appears. Enter the Network Key in the window and then click the Connect button.When a network key is not defined for a selected AP, click on Link to display the warning message box. Then click Connect again in the box.Now when Connected in AP is displayed, and you can access the network.Checking the connection statusMove the mouse pointer over the Wireless Network Connection ( ) icon on the taskbar, and the connection status is displayed.
Connecting Through a Wireless LAN (Optional) 45 Connecting to computer-to-computer networks (peer-to-peer or ad hoc)In computer-to-computer wireless networks, you can wirelessly connect 2 or more computers that have wireless LAN modules. Using this method, a computer that is not connected to the Internet can share the Internet by accessing another computer connected to the Internet. (Refer to "Sharing Internet Access" on page 53.)You can connect by completing the following steps:•Step 1. Set up a computer-to-computer network on a computer.•Step 2. Connect to the configured computer from other computers.Step 1. Setting up a computer-to-computer network1Right-click on the Wireless Network Connection ( ) icon on the taskbar, and select View Available Wireless Networks.2Click Change the order of Preferred Networks.3On the Wireless Network tab, click Advanced.4Clear 'Automatically connect to non-default network' check box, if it is selected. Select 'Computer-to-computer (ad hoc) networks only', and click Close.5In the Wireless Networks tab, click Add.6Enter the network name (e.g. samsung), and unselect 'The key is provided for me automatically'. Enter the encryption key in the Network key field, and click OK.
Connecting Through a Wireless LAN (Optional) 46 To prevent a network connection from an unauthorized user, it would be better to configure a network key (encryption key). A network key consists of 5 ~ 13 alphanumeric characters (e.g. magic), or of 10 ~ 26 hexadecimal numbers (a hexadecimal number is represented by numbers '0' to '9' or letters 'a' to 'f').7Check that the configured network name (e.g. samsung) is in the ’Preferred networks’ item, and click OK.Now your wireless network setup has been completed.
Connecting Through a Wireless LAN (Optional) 47 Step 2. Connecting to the configured computer1Right-click on the Wireless Network Connection ( ) icon on the taskbar, and select View Available Wireless Networks.2Select the wireless network name (e.g. samsung) specified in ”Connecting to computer-to-computer networks (peer-to-peer or ad hoc)” on page 45, and click Connect. 3Enter a cryptographic key in the network key box and click Connect.If the network key is not configured in ”Connecting to computer-to-computer networks (peer-to-peer or ad hoc)” on page 45, just click Connect, without any keystrokes.When connected to the wireless network, the system displays Connected in the selected network of the Network Connection window.Checking the connection statusMove the mouse pointer over the Wireless Network Connection ( ) icon on the taskbar, and the connection status is displayed.
Connecting Through a Wireless LAN (Optional) 48 Wireless Network Setup Using the Wireless LAN Setup ProgramThe procedures to connect to an access point using a wireless LAN configuration program are described below. Since the wireless LAN configuration program is included on the System Software Media, the user has to install the program.Before You Start!To use the system software media, the external USB ODD must be connected to the computer. The following descriptions presuppose that the external ODD is connected.1Insert the System Software Media into the CD drive and install the wireless LAN configuration program (ACU: Atheros Client Utility).Select System Software Media > User Installation > Wireless LAN Driver ReadMe, click ReadMe and install the program according to the instructions.2Right-click( press and hold the Stylus Pen for more than 3 seconds) on the wireless LAN configuration program ( ) on the taskbar and select Open Atheros Client Utility.3Alternatively, click Start > All Programs > Atheros Client Utility > Atheros Client Utility.4In the Profile Management tab, click Scan to search for available wireless networks.5Select the name of an access point (AP) to connect to from the network name (SSID) and then click Activate.6Enter a profile name to be used for the connection and select the security settings of the AP to be connected to in the Security tab.The network authentication, encryption type and password of an access point are configured through the access point management program. For the security information, check the security settings of an access point or ask your wireless network administrator.Refer to the following when setting a WEP key.•Data encryption (WEP): The IEEE 802.11 WEP (Wired Equivalent Privacy) standard defines two levels of encryption, a 64-bit key (this is sometimes represented by 40bits) and a 128-bit key. When connecting to an Atheros access point, you can use the 152-bit key (32 hexadecimal digits or 16 ASCII characters).•Key index: Select the current encryption key index used by the access point from between 1 to 4.•Using an encryption key: Enter 5 (for 64-bit) or 13 (for 128-bit) alphanumeric characters (represented by 0-9, a-z, or A-Z). 7Click OK and then OK again in the Profile Management window.If the profile is created, the profile appears in the list in the Profile Management tab and the connection is established using the profile.
Using Samsung Network Manager 49 Using Samsung Network ManagerSamsung Network Manager is a program that has been developed to enable users to use the network easily.Samsung Network Manager provides the following features.•You can easily set up the network and printer settings.•You can immediately use the network without defining new network settings again after moving locations.By setting the network settings (IP address, printer settings, etc.) for each location, you can immediately access the network without following network setting procedures each time regardless of your location.•You can easily share Internet Access.You can share your Internet connection by setting up a computer with 2 LAN interfaces (wired and wireless, or 2 wired LAN) as the sharing server. Then, you can access the Internet on a sharing client by connecting to the sharing server.•You can diagnose the network status.You can diagnose the network status when the network is not properly connected.Using the Network This section describes the procedures to connect to the Internet by setting up a network. The setting up procedures include the procedures to add a printer to the network.1To use a wired LAN, connect the LAN cable to the LAN port and turn the wired LAN on, if it is turned off.Press the Menu button and click the Wired LAN ON item to turn it on.To use a wireless LAN, you have to turn it on, if it is turned off.Press the Menu button and click the Wireless LAN ON item to turn it on. When the wireless LAN is turned on, the Wireless LAN LED ( ) lights up.2Run Samsung Network Manager.Select Start > All Programs > Samsung > Samsung Network Manager > Samsung Network Manager or double click the Samsung Network Manager() icon on the Desktop.3Click the Add button.4Select a network location icon and enter the name of the location (e.g. Home). Click the Next button.
Using Samsung Network Manager 50 5Select Internet direct connection and click the Next button.6Select the LAN device, setup the IP address and click the Next button.Select DeviceSetup IP AddressSelect DeviceSelect a device to be connected to the Internet. Select either Wired LAN or Wireless LAN.Setting up the IP AddressTo allocate an IP address automatically (DHCP), select Get IP Automatically.To use a static IP address, unselect Get IP Automatically and enter an IP address. For IP address information, ask your network administrator.7When the Printer Setting window appears, click Finish.To add a printer, click Add Printer. The Add Printer Wizard appears. Set up the printer according to the instructions displayed on the screen.When the printer has been added, click the Show printer button, select the newly added printer and then click the Finish button.
Using Samsung Network Manager 51 To not add a printer, select No Default Printer and then click the Finish button.When the network setting is complete, the ’Do you want to move to newly added location now?’ message appears. If you select ’Yes’, the network settings for the added location are applied.When the network settings for the added location are applied, the added place and the corresponding network connection information is displayed in The detailed Information for window.When the network setting is complete, an icon for the added location is created within the Saved Locations window. Now you can use the Internet or add a new network location.MenuCurrent Place Information Saved LocationsWireless LAN AP Connection ProceduresTo use a wireless LAN, first connect to a wireless LAN AP and then you can access the network even when moving location. Or moving location and then you can access the network even when connecting to a wireless LAN APz Right-click over the Wireless Network Connection ( ) icon on the Taskbar and click View Available Wireless Networks.x Click Search AP from the Wireless menu to search for wireless LAN APs.Select an available wireless network (e.g. SAMSUNG) and click the Connect button. For information on available wireless LAN APs, ask your network administrator.
Available APConnectUsing Samsung Network Manager 52 c The network key (security key) input window appears.- If a network key has been set for the wireless LAN AP, enter the network key and click the Connect button. For the network key information, ask your network administrator.- If no network key has been set for the wireless LAN AP, click the Connect button without entering the network key.v When the computer is connected to the wireless LAN AP, the Connected message will appear on the Wireless Network icon in the Taskbar.Using the network after moving locationBy setting the network settings (IP address, printer setting, etc.) for each location, you can immediately access the network without performing the network setting procedures regardless of your location.1Run Samsung Network Manager when connected to the Internet.2Select an icon that represents the corresponding location from the Saved Locations window and then click Move.3When the network settings of the selected location are applied, the new location and the network connection information are displayed in The detailed Information for window.
Using Samsung Network Manager 53 Sharing Internet AccessThis section describes the procedures to share Internet Access.To share Internet Access, you first have to set a sharing server and a sharing client. When the setup is complete, you can access the Internet from the sharing client by connecting to the sharing server.Sharing Server : A computer with a direct connection to the internet and a local network connection.Sharing Client : A computer that uses the Internet by connecting to a sharing server without itself having a direct connection to the Internet.You can connect a sharing server and a sharing client as follows.(See Figure 5 on page (p50))Sharing Server Sharing ClientExternal Internet Device Client DeviceConnection 1 Wired LAN Wireless LAN Wireless LANConnection 2 Wireless LAN Wired LAN Wired LANConnection 3 Wired LAN Wired LAN Wired LANFor Connection 1: To use a wired LAN, connect the LAN cable to the LAN port and turn the wired LAN on, if it is turned off. Press the Menu button and click the Wired LAN ON item to turn it on.To use a wireless LAN, you have to turn it on, if it is turned off.Press the Menu button and click the Wireless LAN ON item to turn it on. When the wireless LAN is turned on, the Wireless LAN LED ( ) lights up.For Connection 2,3: To connect a sharing server and a sharing client using a wired LAN, connect the computers with a crossover LAN cable or network hub first.For Connection 3, you have to connect a LAN card in advance.As an example, Internet sharing procedures for [Connection 1], which connect the sharing server and the Internet through a wired LAN and connect the sharing server and the sharing client through a wireless LAN, are described below.Setting Up a Sharing Server 1Run Samsung Network Manager on the computer to be used as the sharing server.2Click the Add button.3Select a network location icon and enter the name of the location (e.g. Home). Click the Next button.4Select Internet direct Connection for sharing and click the Next button.5Set up the network device to be connected to the external Internet. Determine whether to use a firewall and select a network device to be connected to the external Internet (e.g. Wired LAN). Set the IP address and then click the Next button.
Determine whether to use a firewallSelect a deviceSet an IP addressUsing Samsung Network Manager 54 - To protect against external intrusion attempts, using a firewall is recommended.- For more information on selecting a device and setting the IP address, refer to the description of item 6 of "Setting Up a Network" on page 47.6Select a network device to connect to the sharing client (e.g. wireless LAN) and click the Next button.To Share Internet Access through a Wireless LAN- In the Select Device field, select Wireless.- In the Wireless Connection Name (e.g. Samsung) field, enter the network name.- To use the network key (security key), select the "Use Password ,,," option and enter a network key. Remember the network key because you have to re-enter the key on the sharing client to connect to the sharing server.7The setup information is displayed. Confirm the settings and click the Next button.8When the Printer Setting window appears, click Finish. For the printer setup procedures, refer to the description of item 7 of "Setting Up a Network" on page 47When the Shared Server setting is completed, set up the shared client.
Using Samsung Network Manager 55 Setting Up the Sharing Client1Run Samsung Network Manager on the computer to be used as a sharing client.2Click the Add button.3Select a network location icon and enter the name of the location. Click the Next button.4Select Internet Sharing and click the Next button.- To connect through a wireless LAN, select Internet Sharing - Wireless.- To connect through a wired LAN, select Internet Sharing - Wired.5Confirm the network device to be connected to the server and click the Next button.- To connect through a wireless LAN, enter the wireless connection name (e.g. Samsung) you entered in the sharing server. If you have set a network key (security key) for the sharing server, enter the network key.6The setup information appears. Confirm the information and click the Next button.7When the Printer Setting window appears, click Finish.For the printer setup procedures, refer to the description of item 7 of "Setting Up a Network" on page 47When the settings are completed, you can use the Internet on the shared client.- To access the Internet from the sharing client, the sharing server has to be on.- To use the Internet on the sharing client, select a sharing client icon from the Location List window and then click the Move button.- If the connection is broken while using the Internet on the sharing client, click the Ap Active from the Wireless menu to reestablish the connection.
Using Samsung Network Manager 56 Network Status DiagnosisYou can diagnose the network status when the network is not properly connected.1Run Samsung Network Manager.2Select Auto Diagnosis from the Manage menu.3The Network Connections figure window appears. Click the Start button to start the network diagnosis.4When the diagnosis is complete, out of order devices are marked by the exclamation mark icon. For detailed device status, read the description in the lower part of the window.Reconnect and set up the device according to the diagnosis result.
Using Bluetooth Devices (Optional) 57 Using Bluetooth Devices (Optional)Bluetooth is a wireless communication technology that allows access to devices nearby such as a computer, mobile phone, printer, keyboard or mouse without a cable connection. Bluetooth enables file transmissions, Internet access, a private area network function, and access to a keyboard, mouse and printer between devices supporting the Bluetooth function without a cable connection.Before You Start!•The Bluetooth function is only available between devices supporting Bluetooth (computers, mobile phones, PDAs, printers, etc.), and the function may be restricted depending on the device profile.•The Bluetooth function is optional and may not be supported depending on your model.Bluetooth Functions•File Transmission ( )You can exchange files between 2 Bluetooth devices. You can exchange files with other computers, mobile phones, PDAs, etc.•Network Access ( )You can connect to another computer with the Bluetooth function as you access a wireless LAN in Ad-Hoc mode or connect to the Internet through an AP or Internet Connecting Sharing Server.•Network Access through a Phone Connection ( )You can connect to the Internet through a Bluetooth mobile phone.•Data Sync (Synchronization) ( )You can synchronize the PIMS data (Outlook E-mail address data) with mobile phones, PDAs, notebook computers, etc. supporting Bluetooth.•Electronic Business Card (Vcard) Exchange ( )You can exchange electronic business cards with mobile phones, PDAs, notebook computers, etc. supporting Bluetooth.•Sound Output ( )You can listen to audio from the computer through another Bluetooth device or listen to audio of another Bluetooth device through the computer.•HID Connections ( )You can connect a keyboard, mouse, joystick, etc. supporting Bluetooth. For more information about using the Bluetooth function, refer to the online help of the Bluetooth Device.Bluetooth Software Setup Bluetooth software is installed on computers supporting Bluetooth.For first time use, set up the Bluetooth software as follows.
Using Bluetooth Devices (Optional) 58 1Right-click(press and hold the Stylus Pen for more than 3 seconds) on the Bluetooth icon ( ) at the bottom right of the taskbar, and select Start Using Bluetooth from the pop-up menu.2Click the Next button to start setting up.In the setting up steps, enter a device name to be displayed in the Bluetooth Manager program. Enter a Name in the Computer Name field and select Laptop for the Computer Type field.Also, a step appears for selecting the services to be provided by your Bluetooth device for other Bluetooth devices. At this point, the program automatically detects available services and displays them as selected. It is recommended not to change the default selection.If you change the service settings, the driver necessary for the additionally selected services are installed.At this point, a warning message may appear informing you that there is no Microsoft logo. Since it does not affect the operation, continue the installation.3If the driver installation is complete, the next step proceeds which searches for nearby Bluetooth devices. Since you do not have to search while setting up, click the Skip button and finish the settings.
Using Bluetooth Devices (Optional) 59 4When the settings are complete, the Bluetooth icon menu of the notification area changes as shown in the figure.
Using Bluetooth Devices (Optional) 60 Using BluetoothDescribes how to exchange files between computers supporting Bluetooth and how to use other Bluetooth devices.Bluetooth HelpBluetooth Help provides detailed procedures on using Bluetooth functions.Double-click on My Bluetooth Settings on the Desktop and click Help > Bluetooth Help from the top menu.Select Start > Help and Support > Networking and the Web > Networking > Wireless networking > Bluetooth devices (wireless) to view Windows Help.Exchanging Files between Bluetooth computersThe procedures to exchange files and folders between Bluetooth computers are described below.1On the computer which is sending a file (hereafter Computer A), right-click(press and hold the Stylus Pen for more than 3 seconds) the Bluetooth icon ( ) on the taskbar and select Quick Connection > File Transmission > Search for Device.2In the Select Device window, click on a computer to be connected (hereafter Computer B).
Using Bluetooth Devices (Optional) 61 3If the Bluetooth PIN code requested notification window appears on the bottom right taskbar, click on the window, enter the Bluetooth PIN code and click the OK button.The Bluetooth PIN Code is a password used for the connection between two Bluetooth devices, the user just enter the same PIN Code (E.g. same numbers) on both Bluetooth devices to make a connection.4After a short while, the Bluetooth PIN Code required dialog box appears on Computer B, enter the code that you have entered in Step 3 above.5If the FTP File Access Privilege Request window appears on Computer B, click on the window. If the Select Access Permission window appears, click the OK button.6The file transmission window appears on computer A. Drag files or folders to send onto the window, and the files or folders are automatically transmitted.
Using Bluetooth Devices (Optional) 62 7If the file transmission is complete, close the File Transmission window.The received files are saved in the C:\Documents and Settings\[user name]\My Documents\Bluetooth Exchange folder.Connecting Keyboard, Mouse, Joystick and Headset devicesThe procedures to use Bluetooth HID devices (keyboard, mouse, joystick, etc.) or a headset, etc. on the computer are described below.The Bluetooth PIN Code is a password used for the connection between two Bluetooth devices, the user just enter the same PIN Code on both Bluetooth devices to make a connection.1Turn on the Bluetooth function on the device to connect to (mouse, keyboard, joystick or headset).Some devices have a button to turn on the Bluetooth function, so refer to the corresponding device manual.2Double-click on the My Bluetooth Settings icon ( ) on the Desktop.3If the My Bluetooth Settings window appears, click on View Devices within Coverage.If the device to connect to appears, click on the device. (E.g. mouse)If the device does not appear, click the View Devices within Coverage. If the device has not appeared yet, since this menu changes to Search Devices within Coverage, click the Search Devices within Coverage to show the device.
Using Bluetooth Devices (Optional) 63 4If the Bluetooth PIN Code input window appears, enter a PIN code referring to the manual of the corresponding device. The PIN code for an HID device is generally printed in the manual of the corresponding device.5If you enter the PIN code, you can immediately use the device.A Bluetooth keyboard and mouse work only in Windows. They will not work in MS-DOS mode or in Hibernation mode.Stopping a Bluetooth deviceRight-click(press and hold the Stylus Pen for more than 3 seconds) the Bluetooth icon ( ) on the taskbar and select Stop the Bluetooth Device.To use a Bluetooth device after stopping it, select Start Bluetooth device as above.Use Instructions•Bluetooth devices must be within a 3m distance.•For a better communications environment, use the devices in an open space where no wall or obstacle exists.•For a telephone connection, data synchronization, electronics business card exchange, fax transmission/reception, sound related functions, and serial port function, you can connect with only one Bluetooth device.•Using the network connection or file transmission function, multiple Bluetooth devices can be connected. However, since connecting with multiple devices may slow down the data rate or make the connection unstable, connecting with one device at a time is recommended.•The Bluetooth function of a Bluetooth PDA, mobile phone, mouse or keyboard may be turned off. To use them in connection with a Samsung computer supporting Bluetooth, you must check if the Bluetooth function of the device to connect to is turned on. For the procedures on turning on the Bluetooth function of a device, refer to the manual of the device.•The services provided by Bluetooth devices may vary depending on their capability. For the services provided by Bluetooth devices, refer to the manual of the device.
Using Bluetooth Devices (Optional) 64 Chapter 5. Using ApplicationsIntroducing Programs 65Using Samsung Update Plus 67Program Launcher 69Program Launcher Screen Layout 69Using Program Launcher 70Using AVStation premium 71Start and Screen Layout 71MUSIC Station 72PHOTO Station 74MOVIE Station 78Using AVStation NOW / AVStation Viewer 82Start / Exit AVStation NOW 82Start / Exit AVStation Viewer 83Screen Layout 84MUSIC Station 85MOVIE Station 87CyberLink PowerDVD 89Voice Recorder 91Recording 91
Introducing Programs 65 Introducing ProgramsUsing software supplied with the Samsung computer, you can easily use difficult functions and troubleshoot problems by yourself. Learn how to use the programs yourself. For detailed information, refer to the help of the corresponding software.Before You Start!Every software program may not be provided or the version may differ depending on your computer model.Multi Media Functions•Program LauncherThe Program Launcher categorizes frequently used programs, folders, web sites so that you can easily manage and access them. This program is designed for the small LCD size so that you can easily use this program with the Stylus Pen or your fingers. (Page 75)•AVStation premium ( )AVStation premium is an integrated multimedia program that enables users to enjoy better quality of music, photographs, video, movies, etc. all with a single program. (Page 77)•AVStation ViewerAVStation Viewer is a program that enables you to easily run AVStation premium in full screen. (Page 87)•AVStation NOWAVStation NOW is an integrated multimedia program that enables users to enjoy photographs, video, DVDs, music, etc. all with a single program and without booting Windows even when the computer is turned off. (Page 87)
Introducing Programs 66 •CyberLink PowerDVD ( )CyberLink PowerDVD is a DVD player program supplied with the external USB ODD. To use this program, you have to install this program manually. (Page 95)•Voice Recorder ( )Video Recorder is a program which enables users to make and play recordings. (Page 104)Management Functions•Samsung Update Plus ( )Samsung Update Plus is software that examines and updates the Samsung software and drivers installed on your Samsung computer to the most recent versions. (Page 73)•Samsung Network Manager ( )Samsung Network Manager is a program that has been developed to enable users to configure the network and internet sharing settings easily. You can configure the network settings by the location and you can configure the Internet sharing settings and perform a network diagnosis. (Page 56)•Samsung Battery Manager ()Samsung Battery Manager is a power management program that provides easy-to-use power management and power saving settings so that the battery usage time can be extended. (Page 114)•Samsung Display ManagerSamsung Display Manager is a program that displays the setting status of some buttons on the screen.Example) The icon that appears when pressing the Menu button and clicking Brightness Up.Troubleshooting Functions •Magic Doctor ( )Magic Doctor is troubleshooting software provided by Samsung Computer. A user can diagnose system problems via one-click or by selecting diagnostic items. (Page 118)•Norton AntiVirus ( )Norton AntiVirus is a program that examines a computer and deals with found viruses. Since viruses may damage the files and data on your computer, it is recommended to examine your system frequently with the Norton AntiVirus program. (Page 120)
Using Samsung Update Plus 67 Using Samsung Update PlusSamsung Update Plus is software that examines and updates Samsung software and drivers installed on your Samsung computer to the latest version. To use Samsung Update Plus, your computer has to be connected to the Internet. To Update Samsung Software and Drivers1Select Start > All Programs > Samsung > Samsung Update Plus > Samsung Update Plus.If this is the first time you are running the program, a window will appear asking you if you agree to the agreement in the window.Click Agree to use this software.2Click Search for and Install Updates and click the Search for New Updates button.3If there are available software or driver updates for your computer, the available updates will be listed. Select the required updates from the list and click Install Update to start the update. (The update list on the screen may differ depending on the computer model.) Updates that must be installed separately.If you select Install as an update item that must be installed separately, a message appears informing you of this. Follow the instruction message to correctly install it. Automatic update items display By default, your computer is configured to automatically search for updates. If there is a new update available, this is notified in the notification area. Click the balloon help icon in the notification area. Here you will be able to find the latest available updates.
Using Samsung Update Plus 68 To change the automatic update settings, click the Configuration button in Figure 2 and change the settings.Samsung Update Plus does not provide updates for additionally installed software and device drivers.
Program Launcher 69 Program LauncherThe Program Launcher categorizes frequently used programs, folders, web sites so that you can easily manage and access them. This program is designed for the small LCD size so that you can easily use this program with the Stylus Pen or your fingers.Program Launcher Screen LayoutWhen turning the computer on, the Program Launcher is launched.If it does not appear automatically, click Start > All Programs > Microsoft Touch Pack for Tablet PC > Program Launcher.CloseView TaskbarBattery Charge StatusWhen clicking the icon, the Power Option Properties window appears.Wireless LAN StatusWhen clicking the icon, the Network Connections window appears.Clock MinimizeShortcut IconCategory
Program Launcher 70 Using Program Launcher For example, the procedures to launch the Calculator on the Program Launcher are described below.1Run the Program Launcher.2Select More Programs > Calculator. The Calculator program is launched.•For more detailed usage For more detailed usage, click Program Launcher Help from the Tools category.•Program Launcher User Setting functions You can add a category and add or delete a shortcut icon. Click on Customize Launcher from the Tools category to change the settings.

Navigation menu