Sam Ash Music XPEX360 Portable PA with Bluetooth User Manual

Sam Ash Music Corporation Portable PA with Bluetooth

User Manual

Owner's Manual
Copyright 2013v1.2Samson Technologies Corp.45 Gilpin AvenueHauppauge, New York 11788-8816Phone: 1-800-3-SAMSON (1-800-372-6766)Fax: 631-784-2201 www.samsontech.comThe Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Samson Technologies is under license. Other trademarks and trade names are those of their respective owners.”
Important Safety InformationWARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) AS THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “danger-ous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance in-structions in the literature accompanying the appliance.If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.Private household in the 25 member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar new one).For Countries not mentioned above, please contact your local authorities for a correct method of disposal.By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.AVISRISQUE DE CHOC ÉLECTRONIQUE - NE PAS OUVRIR
1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation open-ings. Install in accordance with the manufacturer’s instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electri-cian for replacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.11. Only use attachments/accessories specified by the manufacturer.12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the ap-paratus. When a cart is used, use caution when moving the cart/appara-tus combination to avoid injury from tip-over.13. Unplug the apparatus during lighten-ing storms or when unused for long periods of time.14. Refer all servicing to qualified personnel. Service is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.15. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquid such as vases shall be placed on the ap-paratus.16. Caution-to prevent electrical shock, match wide blade plug wide slot fully insert.17. Please keep a good ventilation envi-ronment around the entire unit.18. To prevent injury, this apparatus must be securely attached to the stand in accordance with the installation instructions.19. WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.20. CAUTION: Danger of explosion if bat-tery is incorrectly replaced. Replace only with the same or equivalent type.Important Safety Information
Important Safety InformationFCC Notice1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harm-ful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be de-termined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.RF Warning StatementThe device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.This device complies with RSS-310 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.
Table of ContentsIntroduction . . . . . . . . . . . . . . . . . . . . . . . .7Rear Panel Features . . . . . . . . . . . . . . . . . . . . 8Quick Start . . . . . . . . . . . . . . . . . . . . . . . . 9Pairing with a Bluetooth® device . . . . . . . . . . . . . 10Charging the Battery . . . . . . . . . . . . . . . . . . . 11Speaker Placement . . . . . . . . . . . . . . . . . . . 12Avoiding Feedback. . . . . . . . . . . . . . . . . . . . 13Making Connections . . . . . . . . . . . . . . . . . . . 14Specifications . . . . . . . . . . . . . . . . . . . . . . 15
7IntroductionThank you for purchasing the Expedition Express battery-powered portable sound system, featuring wireless Bluetooth® connectivity, to stream audio from your smart phone, tablet, or computer. The Expedition Express is a complete all-in-one solution providing the flexibility of a three-channel mixer (with inputs for a microphone, instrument, and line level devices), a line output for linking multiple speakers, and bass and treble tone controls. Lightweight and compact, the Expedition Express weighs less than 10lbs mak-ing it an excellent complement to any mobile speaker situation. The internal battery provides eight hours of audio on a full charge. The Expedition Express can also be powered by the included AC adaptor for continuous audio. Whether you are looking for a sound system for use outdoors, in the classroom, for karaoke, for presentations, or performing live music, the Expedition Express provides high quality, portable audio in a small self-powered package. We recommend you keep the following records for reference, as well as a copy of your sales receipt. Serial number: ____________________________________________Date of purchase: __________________________________________Dealer name: _____________________________________________With proper care and maintenance, your Expedition Express will operate trouble-free for many years. Should your speaker ever require servicing, a Return Authorization (RA) number must be obtained before shipping your unit to Samson. Without this number, the unit will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-372-6766) for an RA number prior to shipping your unit. Please retain the original packing materials and, if possible, return the unit in its original carton. If your Expedition Express was purchased outside of the United States, contact your local distributor for warranty details and service information.
8Rear Panel Features1. VOL (Ch1) - Used to control the level of the Mic/Line input. 2. MIC/LINE - Use this XLR/1⁄4" input for microphone or a line signal.3. VOL (Ch2) - Used to control the level of the line input.4. INSTRUMENT Input - ¼" input used to connect instrument or line level signals.5. VOL (Ch3) - Used to control the level of the Bluetooth® and MP3 inputs. 6. MP3 IN - Connect a line level device using a 3.5mm audio cable. 7. Pairing Button - Press this button to enable discoverable mode to pair with a Bluetooth audio device. 8. Pairing Indicator - Displays the Bluetooth status of the Expedition Express system. 9. TREBLE - Controls the high frequency tone of the entire system. 10. BASS - Controls the low frequency tone of the entire system.11. Power - Switches on the main power.12. LINE OUT - ¼" output connector to link multiple Expedition Express sys-tems together. 13. POWER Indicator - Lights red when the audio power switch is turned on. 14. DC IN - Connect the supplied power adapter here.15. Battery Indicator - Displays the status of the battery charge level.135212131514687491011
9Quick StartFollow these steps below to quickly get started using your Expedition Express portable sound system.• Set the Expedition Express's power switch to the OFF position, and fully turn all of the VOL controls counterclockwise to 0.• If an outlet is available, connect the included power adaptor to the DC IN of the speaker, and plug it into an AC socket. • Connect a microphone using a standard XLR cable, instrument and line level equipment using a 1⁄4" instrument cable, or portable audio device using a 1⁄8" cable.• Switch on the Expedition Express power.• While speaking into the microphone, playing the instrument, or playing music from a line level audio source, slowly raise the channel VOL until you have reached the desired level. NOTE: If not using the channel 1 input, turn the VOL control all the way down to keep out any unwanted noise. Using EQThe Expedition Express feature a 2-band equalizer allowing you to adjust the systems overall high and low frequencies. The system’s frequency response is flat when the knobs are in the vertical or "12:00" position. Small movements of the controls can make a big difference. Turning the controls all the way up can cause distortion. Use your ears when adjusting the EQ to fit your application. We have provided two example settings to help you get started fine tuning your system.Setting the EQ for Music If you are using the Expedition Express for music playback, turn up the BASS and TREBLE slightly to produce a “hi-fi” frequency response that ac-centuates the low and high ranges.Setting the EQ for Vocal If you are using your Expedition Express with a microphone for speech only, you can reduce the BASS and raise the TREBLE slightly, which will produce a frequency response that accentuates the vocal range.
10Pairing with a Bluetooth® deviceBluetooth® is a wireless communication technology that allows for connectivity between a wide range of devices. The Expedition Express uses Bluetooth to stream high quality audio from your Bluetooth enabled device without the need for connecting any cables. In order for your device to work with the Expedition Express it must first be paired. 1. Turn all three channel VOL controls all down counterclockwise to 0.2. With the Expedition Express and your Bluetooth device powered on; press the PAIR button on the rear panel of the Expedition Express speaker to make the speaker discoverable. The Bluetooth indicator will slowly flash blue. 3. In the settings of your Bluetooth device, set it to “discover” available devices.4. From the Bluetooth device list, select the "Samson Express" device.5. If your device asks for a passkey, enter digits 0000 (four zeros) and press OK. Some devices may also ask you to accept the connection.6. As the Expedition Express is connecting to your device, the Bluetooth indicator will quickly flash blue. 7. The Expedition Express speaker indicates that pairing is complete when the indica-tor turns steady blue. You can now stream audio from your device to the Expedition Express speakers.8. With the volume control on your Bluetooth device turned up, play some music, and slowly raise the Expedition Express channel 3 VOL control until you have reached the desired level.
11Charging the BatteryThe Expedition Express has an internal, rechargeable battery capable of eight hours of continuous audio on a full charge. Even though the system may have some charge when first taken out of the box, we recommend fully charging your Expedition Express before first using the system. To charge the battery:• Set the power switch to the “OFF” position.• Connect the Expedition Express to an AC power outlet using the included power adapter.• Keep the system plugged in until the CHARGE indicator changes to green, indicating the battery is fully charged. The Expedition Express utilizes a sealed lead-acid gel cell battery. When not in use, the battery will slowly self-discharge. If you are planning not to use the Expedition Express for a long period of time, it is advised to fully charge the unit before storing. It is also important to charge the unit every six months when not used. This will ensure a healthy battery and extend its life. If the battery is left with a very low charge for an extended period of time, it is possible to recharge the battery to working condition, but the charge time can take over 24 hours. If you find that the operation time of the Expedition Express becomes noticeably decreased, even after fully charging, the battery should be replaced. Contact Samson customer service or your local distributor for a replacement battery.
12Speaker PlacementThe Expedition Express provides three different placement options for your specific situation. For maximum sound coverage the Expedition Express can be used with a standard 13⁄8” speaker stand. The speaker should be raised above the heads of the listening audience. Take care when placing the speaker on a stand, to ensure that it is on a level, steady surface and will not tip over. When using the speaker on the floor, or when the speaker is below the listener, the Expedition Express features a monitor angle position to project the sound up, towards the audience. For smaller settings, the speaker can be placed vertically on a table or desk.Take care when placing the Expedition Express in direct sunlight for long periods of time, as this may discolor or damage the unit. Do not place the speaker on wet surfaces, as it can cause malfunction. If you notice condensation on the unit, dry the speaker before using or storing.
13Avoiding FeedbackFeedback is the annoying howling and squealing that can heard when the microphone picks up sound from the speaker. The sound is then re-amplified back through the speaker again, creating a feedback loop. Follow these steps to minimize the likelihood of feedback:• Avoid pointing the microphone directly at the speaker. In general it is recommended that the microphone be positioned behind the speaker enclosure. This uses the directional characteristics of the speaker and microphone to your advantage. • Keep the microphone as far from the speaker as possible. This will help achieve isolation between the speaker and the microphone, and allow you to increase the output of the Expedition Express.• Position the microphone as close to the sound source as possible. This will enable the microphone to pick up more direct sound, and allow you to reduce the microphone input gain control. • Reduce the overall level of the speaker.
14Making ConnectionsMP3 Player,Portable AudioInstrument, Keyboard, Drum MachinePaired BluetoothDeviceMicrophone, Instrument,Line Level DeviceLINE OUT to a secondExpedition ExpressSIGNAL FLOWSIGNAL FLOWSIGNAL FLOWSIGNAL FLOW
15SpecicationsAmplifierMic/Instrument Input . . . . . . .XLR / 1/4-inch combi connectorLEVEL Controls . . . . . . . . . Mic/Line, INST, MP3/BlutoothTone Controls . . . . . . . . . . Treble / Bass, ±15dB IndependentLine Input . . . . . . . . . . . . 1/4-inchMP3 Input . . . . . . . . . . . .1/8-inchSpeakersDrivers. . . . . . . . . . . . . .6" Woofer + 1" HF DriverBuilt-in Battery. . . . . . . . . .12V / 7.5AH, Rechargeable & SealedOperation . . . . . . . . . . . . Approx. 8 hours Battery Charging . . . . . . . . . Approx. 4-6 hours for a Single chargeAC/DC Adapter . . . . . . . . . .SMPS AC100~240V, 50~60Hz/ DC19V 3AConstruction . . . . . . . . . . Polypropylene, internally ribbedGrill . . . . . . . . . . . . . . . Perforated Steel Grill, powder coatedMounting . . . . . . . . . . . . Integral 1 3/8-inch Pole Mount ReceptacleDimensions . . . . . . . . . . . 8.75" x 8.25" x 12.7" 222mm x 210mm 323 mmWeight. . . . . . . . . . . . . . 10.5 lb 4.6 kg
Samson Technologies Corp.45 Gilpin AvenueHauppauge, New York 11788-8816Phone: 1-800-3-SAMSON (1-800-372-6766)Fax: 631-784-2201 www.samsontech.com

Navigation menu