SOLUM TG-GR42 ESL User Manual S TAG Datasheet TG GR4200A

SOLUM CO.,LTD. ESL S TAG Datasheet TG GR4200A

User Manual

 S-TAG Datasheet(TG-GR4200A) Preliminary REV 1.0 Solu-M Proprietary and Confidential 1/16     PRODUCT DATASHEET   Company Name  MODEL TG-GR4200A CUSTOMER APPROVAL    □ CUSTOMER REMARK :    Issued By Checked By Approved By JY Kim TH Lee BJ Jun     Solu-M 150, Maeyoung-ro(Maetan-Dong), Youngtong-Gu, Suwon, Gyunggi-Do, Korea Tel : 82-31-210-3494
 S-TAG Datasheet(TG-GR4200A) Preliminary REV 1.0  2/16   S-TAG Datasheet   S-Label (Electronic Label System)  REV 1.0    Solu-M  2017-12-12    Summary This datasheet presents the general performance and specifications of S-Tag for S-Label ESL (Electronic Shelf Label) system, which is based on IEEE 802.15.4.    ©  2015 Solu-M.  All rights reserved The names  of  actual  companies  and products  mentioned  herein may be the trademarks of their respective owners. No  part  of  this  document  may  be  reproduced,  stored  in  a retrieval  system,  or  transmitted  in  any  form  or  by  any  means without the express written consent of Solu-M. This document is subject to change without notice.
 S-TAG Datasheet(TG-GR4200A) Preliminary REV 1.0  3/16   Table of Contents  1 GENERAL DESCRIPTION ..................................................................................................... 5 1.1 FEATURES .............................................................................................................................. 6 1.2 TYPICAL APPLICATIONS .............................................................................................................. 6 2 SPECIFICATION .................................................................................................................. 7 2.1 PRODUCT SPECIFICATION ........................................................................................................... 7 2.2 RADIO (RF) SPECIFICATION (TBD) .............................................................................................. 7 2.3 NFC SPECIFICATION ............................................................................................................... 8 2.4 MECHANICAL DRAWING ........................................................................................................... 8 2.5 LABELS .................................................................................................................................. 9 3 OPERATION TEST .............................................................................................................. 11 4 ESL OPERATION BY DISPLAY ........................................................................................... 12 5 PACKAGE ........................................................................................................................... 13 6 CAUTIONS FOR TREATMENT............................................................................................. 14 6.1 USAGE ENVIRONMENT ............................................................................................................. 14 6.2 STORAGE AND USE ................................................................................................................. 14 6.3 BATTERY REPLACEMENT ........................................................................................................... 15
 S-TAG Datasheet(TG-GR4200A) Preliminary REV 1.0  4/16     Document History   Rev. Date Revision history Page 1.0 12  Dec 2017  Initial release  -
 S-TAG Datasheet(TG-GR4200A) Preliminary REV 1.0  5/16   1 General Description   This S-Tag product is a part of Solu-M S-Label (Electronic Shelf Label) system as well as S-Label Gateway (S-Gate),  Remote  controller  (S-RC).  S-Label  system  make  up  a  system  that  electronically  displays  price and  other  product  information  on  S-Tags,  which  has  been  traditionally  printed  or  written  on  paper  in places like retail markets.  S-Tag receives product price/information updates from S-Gate and updates or changes its display of price and other information.   S-Tag  is  the  product  based  on  IEEE  standard  802.15.4  for  low  power  wireless  communication applications.  S-Tag  consists  of  RF  transceiver,  RF  circuitry  and  8051-compatible  MCU  offering  IEEE 802.15.4 based network protocol and MAC protocol and other peripheral devices.    Figure 1. S-Label System
 S-TAG Datasheet(TG-GR4200A) Preliminary REV 1.0  6/16   1.1 Features  -  Display : E-Paper Display (EPD) (active  type) (85.9 mm x 64.7 mm) (Red) -  Communication : Wireless communication based on IEEE 802.15.4 -  Operating on 2.4GHz Unlicensed ISM band for ZigBee -  Low Power Consumption -  External Wakeup : RF Wakeup (using ISM Band(2.4GHz)) -  Outline Dimension : 103.49 mm x 92.67 mm x 14.5 mm -  Case Color : White -  Working condition: Indoor where wireless communication is available.  1.2 Typical Applications  -  Retail industry with electronic displays, platforms, solutions and services. -  Intelligently communicating, managing, and optimizing price and product information.      Front  Rear Figure 2.   Appearance
 S-TAG Datasheet(TG-GR4200A) Preliminary REV 1.0  7/16   2 Specification  2.1 Product Specification Item Description Size 103.49 mm x 92.67 mm x 14.5 mm Battery CR2450 Lithium Battery (3V) 2.5 ~ 3.3Vdc(condition : In active status) Display Electrical paper display ( active type ) (163.2 X 97.92 mm) (Red) (Resolution : 384(V) x 640(H) /100 dpi) Housing Color White Information display Price, Unit, Symbol etc. Communication Wireless communication based on IEEE 802.15.4 Communication Distance Radius 20m (Line of Sight) Operation Temp. 10 ~ 40 ℃ (@35~70% RH) Etc. No additional anti-theft locking structure : Rail Mounted only  2.2 Radio (RF)1 Specification Item Parameter SPEC Unit Condition Min Typ Max TX Transmit Power -5 0 8 dBm  Error Vector Magnitude  10 30 % When measured for 100 chips Tx Current   10 mA Total current at max Tx Power RX Receiver Sensitivity -70 - - dBm PER < 1%                                                 1 Test Channel : 2480MHz
 S-TAG Datasheet(TG-GR4200A) Preliminary REV 1.0  8/16   2.3 NFC Specification Items Parameter spec. Units Condition Min Typ Max NFC Read/Write Distance - 40 - mm PCB status NFC Read/Write Distance - 30 - mm Final Assy status  2.4 Mechanical Drawing  Figure 3.  Mechanical Dimension
 S-TAG Datasheet(TG-GR4200A) Preliminary REV 1.0  9/16   2.5 Labels  2.5.1 Code Information     Serial 1, 2 Code Value    15 Y 5 S A A 2JW ① ② ③ ④ ⑤ ⑥ ⑦   ① Year : Last two digits of manufacturing year.               (00 ~ 99, Example : 2015 is '15') ② Month : Manufacturing month     (1 ~ 9, X(10), Y(11), Z(12)) ③ Date : Manufacturing date      (1 ~ 9, A(10) ~ V(31)) ④ Vendor : Manufacturing vendor             (D : Dongguan Solu-M, V : Solu-M Vina., T : TSEM,…... etc) ⑤ Line number : Manufacturing Line number     ('A', 'B', 'C', etc) ⑥ Revision : Product revision number     (A : First, B : Second, C : Third, etc.) ⑦ ZigBee IC Lot Number : Last 3 characters of Lot Number     (Example : YME06862JW is ‘2JW’)
 S-TAG Datasheet(TG-GR4200A) Preliminary REV 1.0  10/16   2.5.2 Mac Label Drawings       Figure 2.  Mac Labels   Product  information  is  indicated  in  a  printed  sticker  label.  The  information  consists  of  MODEL  (model name),  MFD  (manufacturing  date),  S/N  (serial  number),  MAC  (MAC  address),  certification  mark,  and Manufacture.  1) TYPE : TG-GR42 2) FCC ID : 2AFWN-TG-GR42 3) Model Name : TG-GR4200N 4) MFD : (Month).(Date).(Year)    ex) APR.17.2017 5) MAC : barcode & barcode number(hexadecimal 14 digits) - 8 digits(1st ~ 8th) : XXXXXXXX (Extension ID) - 2 digits(9th ~ 10th) : B5 (Tag size and type) - 1 digit(11th) : 7 (Univeral Protocol, Ultachip Drive IC & NFC) - 1 digit(12th) : 0 ~ F (Checksum)  This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:  (1) This device may not cause harmful interference, and  (2) this device must accept any interference received, including interference that may cause undesired operation.
 S-TAG Datasheet(TG-GR4200A) Preliminary REV 1.0  11/16   3 Operation Test  Equipments : GateWay(S-Gate), Jig for power supply Target DUT : EPD Tag                      Test Scenario                      ① Install Tag on Jig                    ② Ready to Gateway(S-Gate)                 ③ Tag start to communicate with Gateway               ④ Tag display the image received from Gateway and enter to sleep mode.  (Display pattern : MAC → SCAN Icon → MAC) ⑤ Wake up Tag with R/C                   ⑥ Check Tag (Display pattern : SCAN Icon → MAC)             ⑦ Get off Tag from Jig.                            Criterion (Below condition should be satisfied)              ① Good : You can see a MAC in White display.
 S-TAG Datasheet(TG-GR4200A) Preliminary REV 1.0  12/16   4 ESL Operation by display TBD
 S-TAG Datasheet(TG-GR4200A) Preliminary REV 1.0  13/16   5 Package
 S-TAG Datasheet(TG-GR4200A) Preliminary REV 1.0  14/16   6 Cautions for Treatment   Provisions should be made to protect against any damage to the product caused by improper handling.   It is highly recommended that the product should be installed within 3 months from the date of arrival in the logistics hub. Recommended storage condition is in -20 ~ 60 Celsius degree, 35-70% RH environment.   This RF device operates on the 2.4GHz frequency band and can produce radio interference. The device, therefore, may not be used for applications where safety of human lives is concerned.  6.1 Usage Environment   Take extra cautions when using this RF device in the vicinity of other electronic devices and appliances. Most electronic devices and appliances use electromagnetic waves. Electromagnetic waves emitted by this RF device can affect other electronic devices and appliances.  If using the device in an explosion hazard area, follow all safety regulations, instructions, and signals.  6.2 Storage and Use   Moisture and liquids can damage internal parts and circuit boards if allowed to enter into the device itself.  Do  not  place  or  store  the  product  on  a  sloped  surface.  The  product  may  slide  and  fall  off  the surface and damaged.  Use the product in temperatures ranging from 0℃ to +40℃. Parts and circuits may be damaged if used or stored under temperature extremes.  The display panel needs extra care when handling. - Do not apply any impacts on outside since e-Paper display is fragile. - Continuous  exposure  to  excessive  moisture  (over  70%  RH)  or  UV  makes  display  lifetime shortened. - Ghosting image may be appeared in temperature conditions of less than 15 Celsius degree.  Avoid areas  with  strong  magnetism  or subject  to magnetism. Contact  between  the  device  and  a magnetic object can lead to malfunctions.  Do not place the product near heat-producing kitchen appliances like a stove or a microwave or in the vicinity of highly pressurized containers.
 S-TAG Datasheet(TG-GR4200A) Preliminary REV 1.0  15/16    External impact to the product,  such as from  being dropped, can  damage  the  product or  battery casing can be separated.  Twisting and bending the product can damage the exterior casing and the internal components.  If  this  product  operates  abnormally  in  eliminating  battery  vinyl  or  replacing  battery,  you  should discharge it by contacting battery terminal (+) and (-).  This  product  uses  2.4GHz  frequency  band  for  wireless  communication  network.  Radio communications can be limited or affected by other applications which share same frequency band, such as Wi-Fi, Bluetooth, ZigBee, etc.  Frequent communications, updates and screen renewals may reduce battery life time.  6.3 Battery Replacement  6.3.1 Audience  Authorized persons with the following knowledge are allowed to replace the battery.  Battery  Electronic assemblies like circuit board  Compliance of the instruction ※ Note : If not authorized person, it will not give any warranty.  6.3.2 Instructions  Risk of explosion through incorrect battery replacement.  Keep attention that your hands are dry before you start with replacement.  When replace the battery, please contact right person and get a instructions. ※ Note : Battery rarely has a little stain or leak.  6.3.3 Steps 1.  Open the battery cover. 2.  Take out the batteries. 3.  Put in the new batteries. 4.  Check the batteries direction. 5.  Put the battery cover.
 S-TAG Datasheet(TG-GR4200A) Preliminary REV 1.0  16/16   WARNING :  FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.       Caution THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.        IMPORTANT NOTE : FCC RF Radiation Exposure Statement   This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu