SOLUM TBHH01AP1 BLE Beacon Device User Manual KEYCO Card Manual EN 170817 ver1 2

SOLUM CO.,LTD. BLE Beacon Device KEYCO Card Manual EN 170817 ver1 2

Users manual

Quick Start Guidewww.solu-m.comSafety Precautions WarrantyInquiry Regarding ServiceProduct Specification and CertificatioCaution20170817 EN Ver. 1.2Failure to comply with the below may result in injury to the user or failure/malfunction of the product.Do not disassemble, repair, or modify the product without the assistance of an authorized technician.Care should be taken not to let children or pets suck or bite the product. Do not bend the product excessively or subject the product to impacts.Do not use while pressing yourself against metal. Due to the sensitivity of wireless products to frequency bands, the reception may become poor or disconnection from the mobile phone may occur. Do not use for purposes other than the instructed function.Avoid exposing the product to water.This device features electromagnetic compatibility for homes (B grade) and is intended to be mainly used at home. It can be used in any region.This product is a product of SoluM Co., Ltd.This product is shipped after internal quality control and inspection.The warranty period of this product is 1 year. If defects or failure of the product occurs within 1 year, it will be repaired or replaced free of charge, unless the defects or failure have occurred due to the negligence of the user.This product is a short-range wireless communication product using Bluetooth, and no distance for connection is guaranteed.Repair is not free of charge in the cases below, even within the warranty period.–  Failure or damage due to the mishandling, deliberate actions,     or negligence (dropping, impact, breakage, submergence,     etc.) of a user–  Failure or damage due to disassembly, repair or modication     by the user–  Failure or damage due to usage for purposes other than the     original function–  Failure or damage due to uncontrollable environmental     factors (earthquake, fire, flood, lighting, etc.)Fill out the warranty below at the time of purchase. The warranty will not be reissued in the event of loss.Rated Voltage 3 VModel Name TBHH01AP1Product Name Keyco CardDate of Purchase (yyyy   mm   dd)VendorWarranty Period 1 yearManufacturer / Country of Manufacture SoluM Co., Ltd. (Korea) / China2.4 GHz ISM Band Bluetooth Low Energy 4.2Communication Method85.6 x 53.98 x 1.2 (mm)Dimension200 mAh Li-Manganese Dioxide Non-Rechargeable BatteryBattery-10 °C – 50 °COperating TemperatureMetal Dome SwitchButtonIf you have any diculty in using Keyco, please refer to this manual. For further questions and technical support, please contact us to visit our website on www.keyconder.com/support.MSIP-CRI-SLU-TBHH01AP1 2AFWN-TBHH01AP1
Product Configuration How to install Keyco Finder app Main FeaturesHow to Connect to your SmartphoneName of ComponentsThings to Know before UsageKeyco card Quick Start GuideMulti-Purpose buttonSee the location of a smartphoneCamera remoteOperation Stand-By mode (press 3 seconds)Use the product only in the country where it is purchased. Performance and quality of the product are not guaranteed in other countries.Due to the characteristics of Bluetooth technology, the distance that can be connected to a smartphone may vary according to the user environment.The actual components may differ from the illustration.The appearance and specifications of the product is subject to change without notice to improve performance.This product is optimized for Google Android 4.4 or higher and Apple OS 8.0 or higher.Keyco card is a battery-consuming type product in which the battery cannot be replaced. The battery will last up to 2 years.Battery consumption may vary depending on the conditions of use and the environment.When not in use for a long period of time, change to the Operation Stand-By mode to lower the battery consumption. (Press the Multi-Purpose button for 3 seconds)Detailed use of each function can be found in the manual in the Keyco Finder app or the homepage.Keyco Finder app → Menu button (       ) → Tap User Manual www.keycofinder.comFirst, you must register the product on the Keyco Finder app to use the Keyco card.You must install the Keyco Finder app to use the Keyco card.Access the         Play store on your smartphone.For iPhone users, access the         App Store.Type ‘Keyco Finder’ in the search box.Select Keyco Finder in the list, and tap Install.Run          ‘Keyco Finder’ on your smartphone.Tap Next then select the Keyco card on the screen.Follow the guide on the screen to register the Keyco card.Out of Range AlarmGuide to finding a lost smartphoneInto Range AlarmCamera ButtonFinding a SmartphonePrevent loss by emitting a sound when the smartphone and Keyco card are separated for more than a certain distance (around 10 m)Setting 'Out of Range Notification'A sound is emitted to notify that the Keyco card registered to the smartphone is within a certain rangeSetting ‘Into  Range Notification'When using a camera on the Keyco Finder app, photos and/or videos can be taken by pressing the button on the Keyco card Tap          on Keyco FinderIdentify the location where the item to which the Keyco card is attached is lost on the map in the Keyco Finder appCheck the map on the smartphoneIdentify the location of a smartphone by sounding an alarm when the smartphone to which the Keyco card was registered is not visiblePress the Multi-Purpose button on the Keyco card
FCC Information    This  device  complies  with  part  15  of  the  FCC  Results.  Operation  is  subject  to  the following two conditions :   (1) This Device may not cause harmful interface, and     (2) This device must accept any interference received, including interference that       may cause undesired operation.    Note: This  equipment has  been tested and found  to comply  with the  limits  for CLASS B  digital device,  pursuant  to  Part  15  of  FCC  Rules.  These  limits  are  designed  to  provide  reasonable protection  against  harmful  interference  when  the  equipment  is  operated  in  a  commercial environment This equipment generates, uses and can radiate radio frequency energy and, if not installed  and  used  in  accordance with  the instructions,  may  cause  harmful  interference  to  radio communications.  However,  there  is  no  guarantee  that  interference  will  not  occur  in  a  particular installation.  If  this  equipment  does  cause  harmful  interference  to  radio  or  television  reception, which  can  be  determined  by  turning  the  equipment  off  and  on,  the  user  is  encouraged  to  try correct the interference by one or more of the following measures:    1.1. Reorient or relocate the receiving antenna. 1.2. Increase the separation between the equipment and receiver. 1.3.  Connect  the  equipment  into  an  outlet  on  a  circuit  different  from  that  to  which  receiver  is connected. 1.4. Consult the dealer or experienced radio/TV technician for help.   WARNING Changes  or  modifications  not  expressly  approved  by  the  manufacturer  could  void  the user’s authority to operate the equipment.  “CAUTION : Exposure to Radio Frequency Radiation. Antenna  shall  be  mounted  in  such  a  manner  to  minimize  the  potential  for  human contact during normal operation. The antenna should not be contacted during operation to avoid the possibility of exceeding the FCC radio frequency exposure limit.

Navigation menu