SOLUM ST-GR7500N ESL Graphic TAG User Manual ST GR7500N

SOLUM CO.,LTD. ESL Graphic TAG ST GR7500N

User manaul

S-TAG Datasheet(ST-GR7500N) Preliminary REV 1.0 Solu-M Proprietary and Confidential 1/13 PRODUCT DATASHEET Company Name MODEL ST-GR7500N CUSTOMER APPROVAL CUSTOMER REMARK : Issued By Checked By Approved By JY Kim JS Seo BJ Jun Solu-M 150, Maeyoung-ro(Maetan-Dong), Youngtong-Gu, Suwon, Gyunggi-Do, Korea Tel : 82-31-210-3494
S-TAG Datasheet(ST-GR7500N) Preliminary REV 1.0 Solu-M Proprietary and Confidential 2/13 S-TAG Datasheet S-Label (Electronic Label System) REV 1.0 Solu-M 2016-06-29 Summary This datasheet presents the general performance and specifications of S-Tag for S-Label ESL (Electronic Shelf Label) system, which is based on IEEE 802.15.4. © 2015 Solu-M. All rights reserved The names of actual companies and products mentioned herein may be the trademarks of their respective owners. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means without the express written consent of Solu-M. This document is subject to change without notice.
S-TAG Datasheet(ST-GR7500N) Preliminary REV 1.0 Solu-M Proprietary and Confidential 3/13 Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................... 51.1 FEATURES ......................................................................................................................... 61.2 TYPICAL APPLICATIONS ......................................................................................................... 62 SPECIFICATION .................................................................................................................. 72.1 PRODUCT SPECIFICATION ....................................................................................................... 72.2 RADIO (RF) SPECIFICATION (TBD) .......................................................................................... 72.3 NFC SPECIFICATION .......................................................................................................... 82.4 MECHANICAL DRAWING ....................................................................................................... 82.5 LABELS ............................................................................................................................. 93 OPERATION TEST .............................................................................................................. 114 ESL OPERATION BY DISPLAY ........................................................................................... 125 PACKAGE ........................................................................................................................... 156 CAUTIONS FOR TREATMENT............................................................................................. 166.1 USAGE ENVIRONMENT .......................................................................................................... 166.2 STORAGE AND USE .............................................................................................................. 166.3 BATTERY REPLACEMENT ........................................................................................................ 17
S-TAG Datasheet(ST-GR7500N) Preliminary REV 1.0 Solu-M Proprietary and Confidential 4/13 Document History Rev. Date Revision history Page 1.0 19 Apr 2016 Initial release -
S-TAG Datasheet(ST-GR7500N) Preliminary REV 1.0 Solu-M Proprietary and Confidential 5/13 1 General Description This S-Tag product is a part of Solu-M S-Label (Electronic Shelf Label) system as well as S-Label Gateway (S-Gate), Remote controller (S-RC). S-Label system make up a system that electronically displays price and other product information on S-Tags, which has been traditionally printed or written on paper in places like retail markets. S-Tag receives product price/information updates from S-Gate and updates or changes its display of price and other information. S-Tag is the product based on IEEE standard 802.15.4 for low power wireless communication applications. S-Tag consists of RF transceiver, RF circuitry and 8051-compatible MCU offering IEEE 802.15.4 based network protocol and MAC protocol and other peripheral devices. Figure 1. S-Label System
S-TAG Datasheet(ST-GR7500N) Preliminary REV 1.0 Solu-M Proprietary and Confidential 6/13 1.1 Features - Display : E-Paper Display (EPD) (active type) (163.2 X 97.92 mm) (Red) - Communication : Wireless communication based on IEEE 802.15.4 - Operating on 2.4GHz Unlicensed ISM band for ZigBee - Low Power Consumption - External Wakeup : RF Wakeup (using ISM Band(2.4GHz)) - Outline Dimension : 181 mm X 123 mm X 15.5 mm - Case Color : White - Working condition: Indoor where wireless communication is available. 1.2 Typical Applications - Retail industry with electronic displays, platforms, solutions and services. - Intelligently communicating, managing, and optimizing price and product information. Front Rear Figure 2. Appearance
S-TAG Datasheet(ST-GR7500N)Preliminary REV 1.0 Solu-M Proprietary and Confidential 7/13 2 Specification 2.1 Product Specification Item Description Size 181 mm X 123 mm X 15.5 mm Battery CR2450 Lithium Battery (3V) 2.5 ~ 3.3Vdc(condition : In active status) Display Electrical paper display ( active type ) (163.2 X 97.92 mm) (Red) Housing Color White Information display Price, Unit, Symbol etc. Communication Wireless communication based on IEEE 802.15.4 Communication Distance Radius 20m (Line of Sight) Operation Temp. (@35~70% RH) (RF) -20 ~ 50 0 ~ 40 (@35~70% RH) (Display) Storage Temp. -20 ~ 60 Etc. No additional anti-theft locking structure : Rail Mounted only 2.2 Radio (RF)1 Specification Item Parameter SPEC Unit Condition Min Typ Max TX Transmit Power -42 6 dBm Error Vector Magnitude 10 30 % When measured for 100 chips Tx Current 70 mA Total current at max Tx Power RX Receiver Sensitivity -90- - dBm PER < 1% 1 Test Channel : 2480MHz
S-TAG Datasheet(ST-GR7500N) Preliminary REV 1.0 Solu-M Proprietary and Confidential 8/13 2.3 NFC Specification Items Parameter spec. Units Condition Min Typ Max NFC Read/Write Distance - 40 - mm PCB status NFC Read/Write Distance - 30 - mm Final Assy status 2.4 Mechanical Drawing Figure 3. Mechanical Dimension
S-TAG Datasheet(ST-GR7500N) Preliminary REV 1.0 Solu-M Proprietary and Confidential 9/13 2.5 Labels 2.5.1 Code Information Serial 1, 2 Code Value 15 Y 5 S A A 2JW Year : Last two digits of manufacturing year. (00 ~ 99, Example : 2015 is '15') Month : Manufacturing month (1 ~ 9, X(10), Y(11), Z(12)) Date : Manufacturing date (1 ~ 9, A(10) ~ V(31)) Vendor : Manufacturing vendor (D : Dongguan Solu-M, S : SEMTHAI, T : TSEM, etc) Line number : Manufacturing Line number ('A', 'B', 'C', etc) Revision : Product revision number (A : First, B : Second, C : Third, etc.) ZigBee IC Lot Number : Last 3 characters of Lot Number (Example : YME06862JW is ‘2JW’)
S-TAG Datasheet(ST-GR7500N)Preliminary REV 1.0 Solu-M Proprietary and Confidential 10/13 2.5.2 Mac Label Drawings Figure 2. Mac Labels Product information is indicated in a printed sticker label. The information consists of MODEL (model name), MFD (manufacturing date), S/N (serial number), MAC (MAC address), certification mark, and Manufacture. 1) FCC ID : 2AFWN-ST-GR7500N2) Model Name : ST-GR7500N3) MFD : (Month).(Date).(Year) ex) APR.19.20164) S/N : Daily Production quantity (5 digits) & Serial Number Information (hexadecimal 10 digits)5) MAC : barcode & barcode number(hexadecimal 16 digits)- 6 digits (1st ~ 6th) : XXXXXX (Company code)- 6 digits (7th ~ 12th) : XXXXXX (Increasing number : 000000 ~ FFFFFF)- 4 digits (13th ~ 16th) : 743X
S-TAG Datasheet(ST-GR7500N) Preliminary REV 1.0 Solu-M Proprietary and Confidential 11/13 3 Operation Test  Equipment : Gateway(S-Gate), R/C, Jig for power supply  Target DUT : EPD TAG Figure 3. Operation Test  Test Scenario Install Tag on Jig Ready to Gateway(S-Gate) and R/C Tag start to communicate with Gateway Tag display the image received from Gateway and enter to sleep mode. (Display pattern : MAC SCAN Icon White) wake up Tag with R/C Check Tag (Display pattern : SCAN Icon White) Get off Tag from Jig.  Criterion (Below both two conditions should be all satisfied) Good : You can see a White display. Compare MAC address with that of label attached to Side or Back plane. * gateway lost / not found : You can see a diamond( ) in the upper right corner.
S-TAG Datasheet(ST-GR7500N) Preliminary REV 1.0 Solu-M Proprietary and Confidential 12/13 4 ESL Operation by display It will be updated before 2nd release. Below is just a sample. Display State User Action STATE: 1 Initial display when shipped from the manufacturer (Tag version, MAC address). None STATE: 1 No change. To assign a tag using a PDA STATE 1  2 Searching for GWs (Tag version, MAC address and triangle). A tag woken up by an RC
S-TAG Datasheet(ST-GR7500N) Preliminary REV 1.0 Solu-M Proprietary and Confidential 13/13 STATE 2  4 A tag is connected to a GW and received price (Price) None STATE 2  3 A tag failed to locate a GW (Tag version, MAC address). STATE 4  5 When a tag is connected to a GW, and woken up by an RC, Next page display predefined. Display is end, tag wait 10 second wakeup signal by RC. When signal is detected in this time, immediately return first Page and Send Price Request to GW. No signal in this time, after 10 second return first Page and Same Operation. Woken up by an RC
S-TAG Datasheet(ST-GR7500N) Preliminary REV 1.0 Solu-M Proprietary and Confidential 14/13 STATE 4  6 Connection to a GW is lost (price and Rectangle on upper right corner) None STATE 6  6 When connection is lost and woken up by an RC (blinks with the price and Rectangle) Starts to search GWs. Woken up by an RC STATE 4  1 Initial display (Tag version, MAC address) To clear an assigned tag using a PDA
S-TAG Datasheet(ST-GR7500N) Preliminary REV 1.0 Solu-M Proprietary and Confidential 15/13 5 Package
S-TAG Datasheet(ST-GR7500N) Preliminary REV 1.0 Solu-M Proprietary and Confidential 16/13 6 Cautions for Treatment Provisions should be made to protect against any damage to the product caused by improper handling. It is highly recommended that the product should be installed within 3 months from the date of arrival in the logistics hub. Recommended storage condition is in -20 ~ 60 Celsius degree, 35-70% RH environment. This RF device operates on the 2.4GHz frequency band and can produce radio interference. The device, therefore, may not be used for applications where safety of human lives is concerned. 6.1 Usage Environment Take extra cautions when using this RF device in the vicinity of other electronic devices and appliances. Most electronic devices and appliances use electromagnetic waves. Electromagnetic waves emitted by this RF device can affect other electronic devices and appliances. If using the device in an explosion hazard area, follow all safety regulations, instructions, and signals. 6.2 Storage and Use  Moisture and liquids can damage internal parts and circuit boards if allowed to enter into the device itself.  Do not place or store the product on a sloped surface. The product may slide and fall off the surface and damaged.  Use the product in temperatures ranging from 0 to +40 . Parts and circuits may be damaged if used or stored under temperature extremes.  The display panel needs extra care when handling. - Do not apply any impacts on outside since e-Paper display is fragile. - Continuous exposure to excessive moisture (over 70% RH) or UV makes display lifetime shortened. - Ghosting image may be appeared in temperature conditions of less than 15 Celsius degree.  Avoid areas with strong magnetism or subject to magnetism. Contact between the device and a magnetic object can lead to malfunctions.  Do not place the product near heat-producing kitchen appliances like a stove or a microwave or in the vicinity of highly pressurized containers.
S-TAG Datasheet(ST-GR7500N) Preliminary REV 1.0 Solu-M Proprietary and Confidential 17/13  External impact to the product, such as from being dropped, can damage the product or battery casing can be separated.  Twisting and bending the product can damage the exterior casing and the internal components.  If this product operates abnormally in eliminating battery vinyl or replacing battery, you should discharge it by contacting battery terminal (+) and (-).  This product uses 2.4GHz frequency band for wireless communication network. Radio communications can be limited or affected by other applications which share same frequency band, such as Wi-Fi, Bluetooth, ZigBee, etc.  Frequent communications, updates and screen renewals may reduce battery life time. 6.3 Battery Replacement 6.3.1 Audience Authorized persons with the following knowledge are allowed to replace the battery.  Battery  Electronic assemblies like circuit board  Compliance of the instruction Note : If not authorized person, it will not give any warranty. 6.3.2 Instructions  Risk of explosion through incorrect battery replacement.  Keep attention that your hands are dry before you start with replacement.  When replace the battery, please contact right person and get a instructions. Note : Battery rarely has a little stain or leak. 6.3.3 Steps 1. Open the battery cover. 2. Take out the batteries. 3. Put in the new batteries. 4. Check the batteries direction. 5. Put the battery cover.
S-TAG Datasheet(ST-GR7500N) Preliminary REV 1.0 Solu-M Proprietary and Confidential 18/13 - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Caution This device complies with FCC radiation exposure limits for an uncontrolled environment. Avoid operating this device at a distance less than 20cm f m the user

Navigation menu