SOLING SL-9XXX Car DVD player User Manual

SHENZHEN SOLING INDUSTRIAL CO., LTD. Car DVD player

User Manual

* 7” inch, 16:9 TFT LCD display* Touch screen* Compatible with MP4(AVI/DIVX/5.X); DVD/VCD/SVCD/ WMA/MP3/JPEG disc* Rearview CCD Video output* FM/AM radio, 30 preset stations* Support Bluetooth function* Touch screen is adjustable automatically* Angle of display adjustment by grade freely* Touch screen controlINSTRUCTIONSMP4/DVD/VCD/CD/MP3/TV/BLUETOOTH
Power supplyPower rangeDC 12V10.8-16.0V DCSPECIFICATIONS:FM tunerFrequency range 87.5-108MHzMax operate current 10AInstall size 178X153X101mmGround system Negative groundSignal/Noisse ratioStereo separationSearch station voltDistortion rateAM tuner55dB30dB20-30dBuv1.5%522-1620KHzLimit noise sensitivityDVD PLAYERSignal/Noise ratioFrequency response32dB70dB20Hz-20KHzFrequency range
WELCOMETo properly use this product, please go through this instruction manual for installation and operation, put it in a safe place for future use!WARNINGNOTE: We keep improving this product all the time. There may be some changes in it that are not in this manual.Thank you for enjoying our series of digital car A/V product.1. Please keep the disc slot clean, wipe it off when there is some dirt on it. You should wipe off any dirt on the disc before you place it into the unit. If the disc is dirty and you place it inside the unit, it will cause the unit to go into an error and will not play the disc. Please ask professional to clean the laser.2. Playing the radio at higher volumes for a long period of time may cause hearing issues. You should play this unit at a moderate listen level. 3. This unit is set up by precision parts. If you open up this unit, you will void any and all of your warranty.4. Please do not touch LCD display with any hard object so that you prevent it from getting scratched or damaged.5. To avoid an accident caused by watching the LCD screen. This unit has a vehicle lock out wire so that you will not be allowed to watch a video while driving down the road.6. This unit is meant for a 12V power and negative ground system from a vehicle.INSTRUCTIONS INSTRUCTIONSWIRING DIAGRAMThis player is equipped with ISO standard connector, please follow below instruction:● Yellow – 12 V Constant● Black – Ground wire● Blue - Power Antenna / Remote Amp Turn On● Orange – Back-Up Camera Trigger (+) ● Pink – Parking Brake (-)● White/White black - Left front speaker (+-)● Purple/Purple black - Right rear speaker (+/-)● Green/Green black - Left rear speaker (+/-)● Red - ACC ON (+12V) ● Grey/Grey black - Right front speaker (+/-)
INSTRUCTIONS INSTRUCTIONSNOTE● This unit can play the following discNote: 1. This unit is compatible with MP4/DVD/VCD1.0/2.0/3.0 version, DVD, CD-R, CD-RW, MP3, WMA, JPEG. 2. When playing a DVD, VCD, MP3, CD disc the display will auto identify the disc and show corresponding word. When appears on the display, that means that there is no function, please choose another mode. MODEDVDVCDMP3CDICON CONTENT DISC SIZESound,imageSound,imageSoundonlySoundonly12cm12cm12cm12cm● It may lead to accident if you are going to change unit.● Playing disk during car run on bumpy road will damage laser. Playing substandard disc or damage disc will damage laser.● The environment of inside car is not good, too much dirty, please clean the laser by laser cleanser timely.● Do not work under terribly hot or cold environment, please ensure the temperature in car is in -20℃～60℃.● During operation, if appear on LCD, that means unit do not support that function, operation is invalid.● When unit is showing some abnormal, please refer to TROUBLE SHOOTING in this instruction manual, If you cannot find any solution, please press RESET to resume to initial status.TROUBLE SHOOTINGAfter ignition switch off, setting information all loseRemote control no functionPoor performance of radio stationCan not load discCan not play discCan not switch language/subtitleNo imagePROBLEMCan not power on CAUSECheck whether power fuse blew or notSome factor cause MPU wrong operationNo enough power supply from batteryDisc is scratchedPut wrong side of disc into unitLens has dirtyThere is only one language/subtitle in discVideo line between unit and TV is not properly connectedSOLUTIONChange fuse same as the old onePress RESET button on the panel by pen point, then, power onCheck whether antenna is connected or not, or poor connectionChange new discSlot in the disc with sign side upClean lens by lens clean discIf disc is not with multi-language/subtitle, it cannot switch language/subtitleReconnect linesImproper length of antenna, poor connection of antenna groundingThe disc will not go in all the wayChange the wiring aroundChange battery in remote controlRemove the 2 screws on top of the radioWrong connection between ignition line ACC and Constant 12 Volt wire
FEATURESDVD PLAYER1. International advanced MPEG-4 DECODE TECHNOLOGY2. COMPATIBLE WITH MP4 (AVI/DIVX/5.X), DVD(DVD-R/DVD-RW), VCD, SVCD, CD-RW, WMA, MP3 JPG3. Multiple subtitles, angles, languages supporting, Child lock function4. 4 CHANNEL AUDIO OUTPUT MODE5. PAUSE, PLAY, UP/DOWN, STOP, ZOOM, PBC FUNCTION6. FM/AM RADIO TUNER 30 RADIO STATION (18FM, 12AM)BULETOOTH FUNCTION1. Bluetooth wireless transfers2. Displaying bluetooth paring and connection status, call status, and caller's ID3. Fast performance, fast connection, accurate and sensible search of devices in range4. Support A2DP, AVRCP, HS/HF for handing calls and playing musicLCD DISPLAY1. 7 inch, 16:9 TFT LCD display2. Touch screen3. Auto adotoried panel4. Angle of turn adjustableINSTRUCTIONS INSTRUCTIONSOTHER PLAY MODEAUX IN:AUX IN OPERATION1) Press “Source” button on remote control or touch “AUX” on the touch screen, to switch to AUX mode.2) This will allow you to listen and or watch any source that you have plugged into this section of the radio. 3) This unit has 1 - Video RCA input & 1 pair of Audio RCA’s for this feature.CCD (Back-Up Camera)1) If there is a back-up camera installed onto your car, you will need to connect it to the CCD video input.2) When you are backing up the car there you will see this image on your screen.3) You can set CCD image according to your car's own position in general setting mode.
BASIC OPERATION1. SOURCE ON/OFFPress SRC button on panel or PWR button on remote control quickly to power on. Press SRC button on panel or PWR button on remote control longer to power off.2. PLAYING SOURCE CHOOSEPress SOURCE button on remote control, unit will switch sources in the following sequence: RADIO → DVD → AUX →TV3. MUTE CONTROLPress MUTE button on panel or MUTE button on remote control shortly to turn off sound output, press again to back to sound output.4. VOLUME ADJUSTMENT1) Press VOL+/VOL- button on panel, VOL+/VOL- button on remote control or touch button on display to adjust volume level.2) The volume setting on this unit is 0 - 39.TONE MODE ADJUSTING (SEL)Press SEL button on remote control or SEL button on the panel to choose your desired tune mode:NOTE:1) DVD playing mode, MBP & User will be automatically activated.2) After 5 seconds you choose desired mode, do not adjust volume button. The mode will automatically take you back to status before adjustment.5. RESET1) If unit is not working correctly, you should press the RES button. This will reset the radio and should start working correctly afterwards.2) After reset, all settings will resume back to the factory default settings.VOL→BAS→TRE→L/R →F/RINSTRUCTIONS INSTRUCTIONSYou can touch this button under the Bluetooth mode to select the next mode.Contact book mode switchingTouch this function key to search the dialed numbers. Each time this key is touched, the cursor will move to the next dialed number.Touch this function key to search the received numbers. Each time this key is touched, the cursor will move to the next received number.Touch this function key to search the missed numbers. Each time this key is touched, the cursor will move to the next missed number.1.Features of the Bluetooth function1)You can use the function buttons on the unit to receive a call or dial a phone number.2)You can directly use the hand-free microphone to talk on the phone.3)You can use the build-in volume control switch to adjust the volume at will.4)You can switch between the Bluetooth hand-free mode and the cell phone mode.5)You can use your voice to dial a new number (valid only for cell phones with voice dialing function).6)With the Bluetooth function, you can use the Bluetooth microphone in the car to talk with your folks and friends without having to hold your cell phone, so that your hands are dedicated for driving, which is safer and law-observing. In the mean time, agnetic radiation from the cell phone is avoided.2.Bluetooth match conditionsYou can shortly touch the Bluetooth function key under the main menu to directly access the Blueetooth interface.With a cell phone that supports the function of Blueetooth wireless connection, you can establish a connection between your cell phone and the automobile-loaded unit under the Bluetooth mode to achieve date exchange and synchronization.3.Matching and connections between the cell phone and the Bluetooth of the unitSet your cell phone to the Bluetooth mode, and use the cell phone to search equipments.After the Bluetooth equipment of the unit is searched, the cell phone will ask you for the Bluetooth password. Press the unit matching setup button , and enter the Bluetooth password (0000) and confirm it, and then the cell phone will ask you whether you authorize the connection with this equipment or not. Please select “YES”, and the cell phone will be automatically connected with the said Bluetooth equipment within 30 seconds. “OK LINK” will be displayed on the Bluetooth interface to show that a connection between the cell phone and the Bluetooth device has been successfully established. Under and mode (radio, TV, DVD, etc.), if there is an incoming call to your cell phone which has been stably connected to the Bluetooth device of the unit, the unit will switch from other mode to the Bluetooth mode after the cell phone rings for about 10 seconds. Current mode will be automatically restored after hang-up.Operations and Settings for the Bluetooth Function
PANEL ARRANGEMENTINSTRUCTIONS INSTRUCTIONS1. SRC Button2. MENU Button3. VOL - Button4. VOL + Button5. MUTE Button6. OPEN Button7. RESET Button8. USB Slot9. AUX IN10. Remote Control Receiver11. MIC inputBLUETOOTH TOUCH OPERATION (PIC 9) 1. Bluetooth hand-free/cell phone switching2. Matching function during Bluetooth connection3. Voice dialing function4. Contact book mode switching5. Return to the main screen6. Hand-free key7. Phone number display8. Hang-up key9. Delete key10. Number keysFunctions and DescriptionsIf you touch this switching button at the upper-left corner of the screen under the Bluetooth hand-free mode, the speaker will beep and the hand-free mode will be switched to the cell-phone mode.Bluetooth hand-free/cell phone switchingIf you touch the “Voice dial” button at the lower-left corner of the screen under the Bluetooth hand-free mode and the cell-phone mode, you will hear the keying tone, and you can go ahead with the voice dialing function according to the cell-phone instructions. Eg, if you wish to call someone, you can pronounce his/her name stored in the cell phone, then ,the name of the person to be called will be played by the speaker, and the telephone number of this person will be displayed on the screen and automatically dialed.To cancel voice dialingIf you wish to disable the voice dialing function in the voice dialing mode, you can press the “Voice dialing” key again, and this function will be disabled after you hearing the keying tone.Voice dialing functionHand-free button: After a phone number is keyed in, press this button to call the user of this phone number. When there is an incoming call. Press this button to connect this call.Delete button: When a wrong digit is keyed in, press this button to delete the wrong digit.Hang-up button: When there is an incoming call, press this button to hang up or refuse to connect it.Number keys: You can use these number keys to enter a phone number.Phone number display: The phone number that you have just entered is displayed here.
INSTRUCTIONS INSTRUCTIONSBASIC FUNCTION1. SRC ButtonShort press this button to power on . Long press this button to power off .11. MIC inputBluetooth MIC input.10. Remote control receiverIt is able of receiving infrared signals launched by the remote control matching the nuit.9. AUX INExternal connected audio input.8. USB SlotConnect the USB memory to this socket, and the unit can play music format files supported by this unit in the USB memory.7. RESET ButtonPress this button and this unit will be restored to the initial state.6. OPEN ButtonPress this button can eject the disc.5. MUTE / TFT on/off ButtonPress this button to shut off the sound output, re-press this button can resume the sound output, long press this button can turn off the TFT LCD display.4. VOL + ButtonPress this button to increase the volume.3. VOL - ButtonPress this button to reduce the volume.2. MENU ButtonPress this button to back to the main menu.TV Touch TV mode of the menu or press SOURCE button on remote control to switch toTV mode, auto scan and store channels.Press AMS/RPT button on remote control or SCAN touch button on display to autoscan TV channels. The range of scan if full TV channel. The channels will auto store into number button in sequence.1. Switch channel1) Press SEEK + / SEEK- button on panel or SEEK + / SEEK- on remote control or /touch button on display, unit will skip to previous or next stored channel.2) Press number button on remote control, unit will skip to appointed channel, for example, press 6 button, unit will skip to 6 channel. Press 10+, “_ _” will appear on left top corner of display, press number button 3,9, unit will skip to 39 channel.2. Manual tuning TV channel1) Press and hold SEEK + button on panel, SEEK + button on remote control, or touch button on display to scan TV channel in increase direction.2) Press and hold SEEK - button on panel, SEEK - button on remote control, or touch button on display to scan TV channel in descending direction.3. TV sound system switchPress the AUDI button on the touch screen to switch TV sound system. The sequence is as follows:4. Blue screenThe display will be blue when there is no signal.PAL I→PAL DK→PAL BG
INSTRUCTIONS INSTRUCTIONSBASE12. SD Slot13. Disc Slot14. Slot indicator lightChannal choosingPress up and down to switch channel Back main menuPress this button to adjust angles of the monitorMute on/offDisc open/closeAuto search and store channelOne press down to receive frequencyPress this button to select next channalEnterFunction choosingPress this button to turn back previous channalOne press up to receive frequencyAudio system change; press from PAL I →PAL DK →PAL BGTV system PAL I →SECAM DK →PAL M NTSC MN ←PAL NTV MODE(PIC 8)
MAIN MENU TOUCH OPERATION (PIC 1)RADIOAUX INPUTDVDBLUETOOTHUSB/SDGPSPOWEROSD SETTV CDCINSTRUCTIONS INSTRUCTIONSAUDIO FREQUENCYThis function shows that the effect of standard audio output.TONENote: You can change the timbre of the sound in DVD mode. We suggest keep it in the original place.
INSTRUCTIONS INSTRUCTIONSEQ SETTINGUser definedClassicStandardRockJazzPop
ADJUST MODE (PIC 3)Volume: press / button to adjust volumeSharp: press / button to adjust sharp sound high and lowBass: press / button to adjust bass levelBack main menuAdjust front and rear speakerAdjust left and right speakerEQ modeFrom Rock POPClassicOffDBAS on/off: press once to DBAS on, press again to DBAS off Loud: press once off LOUD on, press again to turn offChoose the best listening place; this function will make you enjoy the best comfortable sound effectsResume standard videoExit setupINSTRUCTIONS INSTRUCTIONSMUSIC SURROUNDINGS SETTING (PIC 7)ChurchConcertPassiveWideLiveNote: This function only is used with the remote control in CD/MP3/USB/SD mode. Once you have one of these settings on. You will no longer have Bass & Treble adjustments until this feature is set to off.
REMOTE CONTROL FUNCTION4. SOURCE ButtonPress this button to choose audio sources.5. EQ ButtonPress this button to choose POP, ROCK, EQ off.6. SEEK + ( ) / SEEK - ( ) ButtonPress this button to manual turning, speedor quick back, previous song and next song.7. VOL + ( ) / VOL - ( )Press this button to increase or decrease volume level.8. SEL ButtonPress this button to choose sound feature.9. LOUD ButtonPress this button to startup LOUD function.10. BAND - P/N ButtonIn radio mode, press this button to choose band. In VCD, DVD mode, press this button to choose AUTO, PAL or NTSC system.11. LOC/RDM ButtonIn radio mode, press this button to switch between local and direction. In VCD, CD mode, press this key to randomly play.12. STOP ButtonPress this button to stop playing.13. PLAY/PAUSE ButtonPress this button to switch between play and pause. In stop mode, press this button to play.14. ST/ PROG ButtonIn radio mode, press this button to choose stereo or mono station. In audio mode, itcan help STOP button to programmed play.1. POWERPress once to switch on, press again to switch off.2. MUTE ButtonPress once to turn off audio output, press again to resume volume level.3. DSPPress this button to show the time.INSTRUCTIONS INSTRUCTIONS10. CD Program PlayIn CD mode, you can set the sequence of playing by the program function, the operationis as follows:When CD is playing, press ST/PROG button, then the display shows:Input the number of the song you want to program by the remote control, program thefirst song, input your desired song, for example, the sixth song, and press number button 6 on the remote control. Program the second song, press button move the cursor to 2 . Input your desired song, for example, the ninth song, press number button 9 on the remote control. Press button to program play.Back to the normal mode, press the ST/PROG button, then press button. Note: This function can only be worked by the remote control.11. MP3 Program PlayIn MP3 mode, you can set the sequence of playing by the program function, the operation is as follows:When MP3 is playing, press ST/PROG button, then the display shows:Then, input desired song by remote control.For example: Program the first song, input 01, press button move the cursor to the second lattice, input desired song, for example the third song. Program the second song, press button, work with button, move the cursor to 2 . Input 01, press button move the cursor to the second lattice, input desired song, for example, the sixth song(press 6). Press button to program play.Back to the normal mode, press the ST/PROG button and then press button. Note: This function can only be worked by the remote control.PROGTC3__:__4__:__TC7__:__8__:__5__:__6__:__TC11__:__12__:__9__:__10__:__TC15__:__16__:__13__:__14__:__PLAY DELETE1__:__2__:__PROGTC3__:__4__:__TC7__:__8__:__5__:__6__:__TC11__:__12__:__9__:__10__:__TC15__:__16__:__13__:__14__:__PLAY DELETE1__:__2__:__
15. 0 - 10 + ButtonPress this button to choose desired song, section, preset stations.* Decimal numbers, for example the 19thsong, press 1,9 button;* Centesimal numbers, for example, the120th song, press 1,2,0 button.16. AMS / RPT ButtonIn radio mode, press this button to browse stored stations. In audio mode, press this button to play repeatedly.17. TITLE ButtonIn DVD mode, press this button to play back to the top menu of disc.18. AUDIO ButtonIn DVD mode, press this button to switch language of dialogue. In VCD mode, press this button to choose left track, right track, and stereo.19. SET Playing TimeIn DVD mode, press this button, you can define playing time.20. SUBTITLE ButtonIn DVD mode, press this button to switch language of subtitle.21. PBC ButtonIn VCD mode, press this button to display all song menus, work with number buttonto choose songs.22. UP, DOWN, LEFT, RIGHT, ENTERButtonIn DVD mode, press this button to move cursor up, down, left, right to choose item in menu. Press the enter button to confirm choice.23. SLOW ButtonIn audio mode, press this button to slow backward and slow forward.24. ANGLE ButtonIn DVD mode, press this button to change play angle.25. SETUP ButtonIn audio mode, press this button to choose different set items.26. OSD DisplayPress this button to display the title chapter and the left time.27. ZOOM ButtonIn DVD/VCD mode, press this button to ZOOM in. In CD/MP3/USB/SD mode, press this button to choose EQ.28. MENU ButtonPress button to back to the main menu.BATTERY CHANGEWhen control distance of remote controlbecomes shorter or no function, please change battery. Please confirm polarity before change.One hand press stopper, then pull out battery.Put battery into controller.Insert battery holder into controller.INSTRUCTIONS INSTRUCTIONSSlide in CD/MP3 disc, unit will play it automatically. If disc is in slot, press DVD touch button on main menu can to play.1. Repeat PlayIn CD/MP3 mode, press AMS/RPT button on remote control, to startup following, repeatCD disc: Single song repeat→ Repeat play off.MP3 disc: Single song repeat→Directory repeat→ Repeat play off.2. Fast Forward/Fast RewindPress SEEK + / SEEK - button on remote control, or / touch button on display to speed forward or backward playing.Note: Hold above button a bit longer to operate.3. Previous/Next Song PlayIn playing mode, press SEEK + / SEEK - on remote control, or / touch button on display to choose previous/next song.4. Pause PlayIn play mode, press button on remote control, or button on display to pause. Press again to go back to normal play.5. Stop PlayIn play mode:1) Press button on remote control to enter the pause mode, the position will be stored in unit. At that time, press button on remote control or touch button on display to resume playing at the stored position.2) Press button on remote control twice to enter into stop mode, here, press button on remote control or touch button on display, unit will play from the first song.6. OSDIn playing mode, short press OSD on remote control to show all information of present disc.7. Randomly PlayIn CD mode, press LOC/RDM button on remote control, to instantly play each song. Press again to back to the normal play.8. EQ Mode1) This function can only be worked by remote control.2) When playing CD/MP3, press the “ZOOM” button on the remote control, you can choose the sound mode.3) When enter this function, press the button / / / to move the course to select sound mode which in the system menu, after your selection position will show red colorto indicate the confirmation.9. OPENPress OPEN button on panel to eject disc.CD/MP3 BASIC OPERATION (Look at Picture #4)
This white bar shows the rate of process of loading a disc.Note: When loading a disc, touch screen function can not be used.LOADINGINSTRUCTIONS INSTRUCTIONSPROGTC3__:__4__:__TC7__:__8__:__5__:__6__:__TC11__:__12__:__9__:__10__:__TC15__:__16__:__13__:__14__:__PLAY DELETE1__:__2__:__15. VCD Program PlayingIn VCD mode, you can set playing sequence of songs by program play function. The program playing operation steps are as follows:In VCD mode, press ST/PTOG button, display will show:Input the songs which you want to programmed by the number buttons on remote control. For example: Program the first song, input your desires song, for example, the fourth song, and press number button 4 on the remote control. Program the second song, press button move the cursor to 2 . Input your desired song, for example, the eighth song, press number button 8 on the remote control. Press button to program play. Back to the normal mode, press the ST/PROG button, then press button.Note: This function can only be worked by the remote control.
INSTRUCTIONS INSTRUCTIONSTouch this area to enter & exit main menu.DISC PLAY TOUCH OPERATION (PIC 4)Touch option: next song; previous songs; adjust monitor angles; Pls refer to Pic 5 when touch “SET” button; There is a yellow remind when touch any button.You can select “X2→X4→X8→X16→X20→Play” to speed up when you press this button . You can select “X2→X4→X8→X16→X20→Play”to backward when you press this button . MP3 mode, press this button so you can move the cursor to left/right/up/down and select the songs which in the system menuDVD mode, pressthis area to show function icons8. OSDIn playing mode, short press OSD on remote control to show all information of present disc.9. Number ButtonsIn VCD mode, press 0-9 number button to input song. For example, you want to choose13th song, press 10+ button, and then press 3 button once to play 13th song. Note: This function can only be worked by the remote control.10. Repeat PlayIn playing mode, press AMS/RPT button on remote control, to startup following, repeat function. Single song repeat→ Repeat play off.Note:1) When playing VCD disc, if PBC is on, no repeat function.2) After unit is power off or mode is switched to other playing mode except VCD mode.if you switch back to VCD mode, repeat playing will be cancelled.11. Randomly PlayIn VCD mode, press LOC/RDM button on remote control, to instantly play each song. Press again to back to the normal play.Note: When VCD disc, if PBC is on, RDM will not work.12. Switch TrackIn VCD mode, press AUDIO button on remote control to switch track as followingsequence:13. OPENPress OPEN button on panel to eject disc.Left Right Stereo14. PBC (MENU) PlayIn VCD mode, press this button then play the PBC and display will show whole menu in disc, work with number button to choose song. When you are playing either song of the PBC, and you want to stop to select another song, press the button to turn off.Note:1) This function can be worked by the control.2) PBC is suitable for the SVCD and VCD 2.0 disc.3) In PBC mode, you can not press number button only to choose song.
DVD MODE (PIC 5)AUDIO SETTING ON TOUCH SCREENBass choosing: when touched the button will be yellow, touch this button to exit, touch it again to resume.Loud choosing: this function is defined open, when it is touched at the first time, the loud function will be closed, at the same time, yellow light disappear.Audio selection: VOL → BAS → TRE → BAL → FAD When using this function, the position bar will be highlighted.EQ mode: Touch the buttonto change settings:ROCK → POP → CLASSIC → OFFChange the listening positionINSTRUCTIONS INSTRUCTIONSSlide in the VCD disc, it will play it automatically. If the disc is in slot, press DVD touch button on main menu can to play.1. Pause PlayIn playing mode, press button on remote control, or on display to pause. Press again to back to normal play.2. Stop PlayIn playing mode, 1) Press button on remote control to enter the pause mode, the position will be stored in unit. At that time, press button on remote control or touch button on display to resume playing at the stored position.2) Press button on remote control twice to enter into stop mode, here, press button on remote control or touch button on display, unit will play from the first song.3. Fast Forward/Rewind FunctionIn playing mode, press SEEK + button on remote control, or touch button on display to speed play.When you need quick back, press SEEK - button on remote control, or touch button on display to quick back play.Note: Hold above button a bit longer to operate.4. Previous/Next Song PlayIn playing mode, press SEEK + / SEEK - on remote control, or / touch button on display to choose previous/next song.5. Switch SystemIn playing mode, short press the BAND/P/N button on remote control, to select PAL, AUTO, NTSC TV system.Note: This function can only be worked by the remote control.6. Slow PlayPress SLOW button on remote control to slow play. The level of slow playing is as follows.Sequence is : Note: This function can only be worked by the remote control.7. Zoom In / Zoom OutPress ZOOM button on remote control to zoom in / zoom out the picture. The levels areas follows: Note:1. This function can only be worked by the remote control.2. Image which is zoomed in can be moved by up/down/left/right cursor to move.3. Image which is zoomed out cannot be moved.VCD BASIC OPERATION (Look at picture #4)SLOW 1/2 SLOW 1/3 SLOW 1/4 SLOW 1/5SLOW 1/6SLOW 1/7PLAYZOOM IN 2 ZOOM IN 3 ZOOM IN 4ZOOM IN 1/2ZOOM IN 1/3ZOOM IN 1/4ZOOM IN OFF
VIDEO SETTING ON TOUCH SCREENImage mode: You can choose the area in thebroken line on the panel, standard, defined, soft, according what you need to choose,the blue back light will disappear.You can choose: Brightness, Contrast, Color, Hue, adjust the image effect according to your sight. The blue bar will show your level. Video mode: When using thisfunction, the position will be darker on the screen.INSTRUCTIONS INSTRUCTIONSDIGITAL SETUP1. Press or button 2. Press / / / button, then to enter.OP MODEDYNAMIC RANGEDUAL MONOEXIT SETUPDIGITAL SETUPOP MODEDYNAMIC RANGEDUAL MONOEXIT SETUPDIGITAL SETUPOP MODEDYNAMIC RANGEDUAL MONOEXIT SETUPDIGITAL SETUPLINE OUTRF REMODOP MODEDYNAMIC RANGEDUAL MONOEXIT SETUPDIGITAL SETUPOP MODEDYNAMIC RANGEDUAL MONOEXIT SETUPSTEREOMONO LMONO RMIX MONODIGITAL SETUPOP MODEDYNAMIC RANGEDUAL MONOEXIT SETUPDIGITAL SETUPFULL6/84/82/8OFF
INSTRUCTIONS INSTRUCTIONSEXIT SETUPBRIGHTNESSCONTRASTHUESATURATIONSHARPNESSVIDEO SETUPEXIT SETUPBRIGHTNESSCONTRASTHUESATURATIONSHARPNESSVIDEO SETUPEXIT SETUPBRIGHTNESSCONTRASTHUESATURATIONSHARPNESSVIDEO SETUP121086420EXIT SETUPBRIGHTNESSCONTRASTHUESATURATIONSHARPNESSVIDEO SETUP86420
INSTRUCTIONS INSTRUCTIONS1. Press or button 2. Press / / / button, then to enter.VIDEO SETUPEXIT SETUPBRIGHTNESSCONTRASTHUESATURATIONSHARPNESSVIDEO SETUPEXIT SETUPBRIGHTNESSCONTRASTHUESATURATIONSHARPNESSVIDEO SETUPEXIT SETUPBRIGHTNESSCONTRASTHUESATURATIONSHARPNESSVIDEO SETUPEXIT SETUPBRIGHTNESSCONTRASTHUESATURATIONSHARPNESSVIDEO SETUP121086420EXIT SETUPBRIGHTNESSCONTRASTHUESATURATIONSHARPNESSVIDEO SETUP121086420EXIT SETUPBRIGHTNESSCONTRASTHUESATURATIONSHARPNESSVIDEO SETUP+ 6+ 4+ 2- 0- 4- 6- 2
INSTRUCTIONS INSTRUCTIONS1. Press or button 2. Press / / / button, then to enter.AUDIO SETUPEXIT SETUPOSD LANGUAGEAUDIO LANGSUBTITLE LANGMENU LANGLANGUAGE SETUPEXIT SETUPOSD LANGUAGEAUDIO LANGSUBTITLE LANGMENU LANGENGLISHGERMANSPANISHFRENCHPORTUGUESELATINITALIANLANGUAGE SETUPEXIT SETUPAUDIO OUTKEYAUDIO SETUPAUDIO OUTKEYEXIT SETUPSPDIF/OFFSPDIF/RAWSPDIF/PCMAUDIO SETUPEXIT SETUPAUDIO SETUPAUDIO OUTKEYAUDIO OUTEXIT SETUPAUDIO SETUPKEY #+4+20-2-4FM1 FM2 FM3AM1AM21. Band SelectionIn radio mode, press BAND button, BAND/P/N button on remote control, or touch position on screen every time to choose band, the sequence is as follows:2. Adjust FrequencyManually Adjust Frequency:Press SEEK + button on remote control, or touch button on display shortly every time,frequency will increase one step by one step till you get desired frequency. Press SEEK -button on remote control, or touch button on display shortly every time, frequency will decrease on step by step till you get desired frequency.Search Station:Press SEEK + / SEEK - button on remote control, or / touch button on displayshortly every time to search station in up/down direction. When get one station, it will auto stop searching.3. Browse / Auto Search and Store Station1) In radio mode, press AMS/RPT button on remote control, or APS button on display shortly to browse preset station on 1-6;2) In radio mode, press AMS/RPT button on remote control, or APS button on display longer to auto search in whole band from present frequency and store 6 most strong frequency on 1-6;3) This unit has FM1, FM2, FM3, AM1, AM2 Bands. Each band can store 6 stations, so a total 30 preset stations.Note: After preset station, unit will cancel the former preset stations.4. Mono/Stereo SelectionIn radio mode, press ST/PTOG button on remote control or ST touch position on display to choose mono/stereo program.Note: In radio mode, start up the stereo function automatic, touch the ST button again on the display, the TFT display will show the ST OFF & MOMO mark, that is to turn off the stereo. When the right under foot appear the MONO mark, it show the MONO on.5. Manual Preset and Store StationIn radio mode, press 1-6 button on remote control, or 1-6 position on display longer to store preset frequency into preset channel. For example, the present frequency is89.8MHz, press 2 button longer, then 89.8MHz frequency is stored in 2 channel.RADIO OPERATION (Please look at picture #6)
INSTRUCTIONS INSTRUCTIONSLANGUAGE SETUP1. Press or button 2. Press / / / button, then to enter.EXIT SETUPOSD LANGUAGEAUDIO LANGSUBTITLE LANGMENU LANGLANGUAGE SETUPEXIT SETUPOSD LANGUAGEAUDIO LANGSUBTITLE LANGMENU LANGLANGUAGE SETUPEXIT SETUPOSD LANGUAGEAUDIO LANGSUBTITLE LANGMENU LANGLANGUAGE SETUPEXIT SETUPOSD LANGUAGEAUDIO LANGSUBTITLE LANGMENU LANGENGLISHGERMANSPANISHFRENCHPORTUGUESELATINITALIANLANGUAGE SETUPEXIT SETUPOSD LANGUAGEAUDIO LANGSUBTITLE LANGMENU LANGENGLISHGERMANSPANISHFRENCHPORTUGUESELATINITALIANLANGUAGE SETUPEXIT SETUPOSD LANGUAGEAUDIO LANGSUBTITLE LANGMENU LANGENGLISHGERMANSPANISHFRENCHPORTUGUESELATINITALIANLANGUAGE SETUPSlide in DVD disc, unit will play it automatically. If disc is in slot, press DVD touch button on main menu to play disc.1. Pause PlayIn playing mode, press button on remote control, or on the display to pause. Press again to go back to normal play.2. Stop PlayIn playing mode, 1) Press button on remote control to enter the pause mode, the position will be stored in unit. At that time, press button on remote control or touch button on display to resume playing at the stored position.2) Press button on remote control twice to enter into stop mode, here, pressbutton on remote control or touch button on display, unit will play from the first song.3. Fast Forward/Fast Backward PlayIn playing mode, press SEEK + button on remote control, or touch button on display to speed play.When you need quick back, press SEEK - button on remote control, or touch button on display to quick back play.Note: Hold above button a bit longer to operate.4. Previous/Next Song PlayIn playing mode, press SEEK + / SEEK - on remote control, or / touch button on display to choose previous/next song.5. Switch SystemIn playing mode, short press the BAND/P/N button on remote control, to select PAL, AUTO, NTSC TV system.Note: This function can only be worked by the remote control.6. Slow PlayPress SLOW button on remote control to slow play. The level of slow playing is as follows.Sequence is :Note: This function can only be worked by the remote control.7. Zoom In/Zoom OutPress ZOOM button on remote control to zoom in / zoom out the picture. The levels areas follows:Note:1. This function can only be worked by the remote control.2. Image which is zoomed in can be moved by up/down/left/right cursor to move.3. Image which is zoomed out cannot be moved.DVD BASIC OPERATION (Please link with touch operation at pic 4)SLOW 1/2 SLOW 1/3 SLOW 1/4 SLOW 1/5SLOW 1/6SLOW 1/7PLAYZOOM IN 2 ZOOM IN 3 ZOOM IN 4ZOOM IN 1/2ZOOM IN 1/3ZOOM IN 1/4ZOOM IN OFF
INSTRUCTIONS INSTRUCTIONSNote:1. After input code “0000” press ENTER button to turn on child lock;2. Move cursor to level item, choose desired level;3. Only child lock is in can you choose.TV SYSTEMTV TYPEPASSWORDRATINGDEFAULTEXIT SETUPSYSTEM SETUPVIDEOTV SYSTEMTV TYPEPASSWORDRATINGDEFAULTEXIT SETUPSYSTEM SETUPVIDEOTV SYSTEMTV TYPEPASSWORDRATINGDEFAULTEXIT SETUPSYSTEM SETUPVIDEOTV SYSTEMTV TYPEPASSWORDRATINGDEFAULTEXIT SETUPSYSTEM SETUPVIDEOTV SYSTEMTV TYPEPASSWORDRATINGDEFAULTEXIT SETUP1. KID SAFE2. G3. PG4. PG 135. PG-R6. R7. NC-178. ADULTSYSTEM SETUPVIDEOTV SYSTEMTV TYPEPASSWORDRATINGDEFAULTEXIT SETUPRESTORESYSTEM SETUPVIDEO8. OSDIn playing mode, short press OSD on remote control to show all information of present disc.9. Repeatedly PlayIn play mode, press AMS/RPT button on remote control to start up follow repeat function.10. Angle SwitchIf the DVD disc is recorded with multi-angles, you can press the ANGLE button to switch the angle during playing.The sequence is as follow:ANGLE 1 → ANGLE 2 → ANGLE 3Note:1. It just can be worked by the remote control.2. It is only for the DVD disc which has multi-angle.3. If there is a sign on the cover of the DVD disc. The number in the sign means how many angles the disc has.4. You can not switch the angle when slow playing.11.Multi-AudioThere are different languages of dialogue and audio systems in DVD disc.If the DVD disc is recorded with multi-audio, you can switch the language of dialogue and the audio systems when playing.Press the AUDIO button repeatedly to change the language of dialogue.Note1. It just can be worked by the remote control.2. It is only for the DVD disc which has multi-language.3. If there is a sign on the cover of the DVD disc, means that it was recorded by multi-language/audio system.4. In VCD mode, press the AUDIO button to select the L/R or STEREO track.12.Multi-SubtitleIf the DVD disc is recorded with multi-subtitle, you can switch the languages of subtitle.Press the sub-t button repeatedly to change the language.Note:1. It just can be worked by the remote control.2. It only for the DVD disc which is recorded with multi-wubtitle.3. If there is a sign on the cover of the DVD disc means theat it has several subtitle.13. Title SelectIn DVD mode, press TITLE button to back to the title menu. Display shows all the titles of the disc. You can select the chapter you want by the cursor, press play button to play the chapter.Note: It just can be worked by the remote control.Repeat(chapter) Repeat(section) Repeat(off)
SYSTEM SETUP1. Press or button 2. Press / / / button, then to enter.TV SYSTEMTV TYPEPASSWORDRATINGDEFAULTEXIT SETUPSYSTEM SETUPVIDEONTSCPALAUTOTV SYSTEMTV TYPEPASSWORDRATINGDEFAULTEXIT SETUPSYSTEM SETUPVIDEOTV SYSTEMTV TYPEPASSWORDRATINGDEFAULTEXIT SETUPSYSTEM SETUPVIDEOTV SYSTEMTV TYPEPASSWORDRATINGDEFAULTEXIT SETUP4:3 PS4:3 LB16:9SYSTEM SETUPVIDEOTV SYSTEMTV TYPEPASSWORDRATINGDEFAULTEXIT SETUPSYSTEM SETUPVIDEOTV SYSTEMTV TYPEPASSWORDRATINGDEFAULTEXIT SETUPSYSTEM SETUPVIDEO S-VIDEOINSTRUCTIONS INSTRUCTIONS14. MENU SelectIn playing mode, press PBC button on remote control to back to the menu, display will show chapter and section in disc. Work with / button on remote control or touch button on display to choose your desired song. Press button / ENTER button to play.Note: This function can only be worked by the remote control.OPEN: Press OPEN button on panel to eject disc.15. Program PlayIn DVD mode, you can set the sequence of playing by the program function, the operation is as follow:When DVD is playing, press ST / PROG button, then display shows:For example, program the first song, input 01, press button move the cursor to the second lattice, input desired song, for example, the third song. Program the second song, press button, move the cursor to 2 . input 01, press button move the cursor to ththe second lattice, input desired song, for example, the 6 song (press 6). Press button to program play. Back to the normal mode, press the ST/PROG button, then press button.Note: This function can only be worked by the remote control.16. Digital AlbumPlay the disc contains JPEG pictures, read the picture menu first.1. Press button on remote control, the pictures will be browsed automatically. (It also can be worked to press number 6 button on the unit.)2. Press ENTER button on the remote control, it can be manual browsed by SEEK + and SEEK -.3. ZOOM in picture function: During auto browsing, press pause button stop the screen, press ZOOM button to zoom in or zoom out the picture. During manual browsing, you can press ZOOM button to zoom in or zoom out picture directly.4.Under zoom in picture, you can move the picture by . Note: You can not move picture in normal mode and zoom out mode.17. SetupPress SETUP button, display will show the system setup menu and the submenu, select the item you want by , after selecting the proper item, press / / / to press ENTER to confirm.Note:1. It just can be worked by the remote control.2. Some function setting maybe different because of the different model or disc.3. If the selected language is not recorded in the disc, then unit will show the appointed language,4. About the “SETUP”, please read the follow.Press “SETUP” on the remote control, it will appear the following touch menu:PROGTC101:03201:063__:__4__:__TC7__:__8__:__5__:__6__:__TC11__:__12__:__9__:__10__:__TC15__:__16__:__13__:__14__:__PLAY DELETE

Navigation menu