SIGFOX SMBST4 Access Station User Manual Quick start Guide

SIGFOX SA Access Station Quick start Guide

Contents

Quick start Guide

Quick Start Sigfox Access Station Micro SMBS-T4+33 (0)5 82 08 07 10Bâtiment E-volution425, rue Jean Rostand31670 Labège – Francesigfox.comThe information presented is subject to change without notice. Sigfox assumes no responsibility for inaccuracies contained herein. Sigfox and the Sigfox logo are trademarks of Sigfox. All other trademarks are the property of their respective owners. Copyright ©2018 Sigfox. All right reserved.August 2018Step 4 Activation / congurationThe activation of the station on the cloud (referred as commissioning) is done by the local Sigfox Operator.If the station has been registered, the station is ready and operational as soon as the boot up is done and the LED is solid green.Understanding the LED of your stationSupportThank you for choosing the Sigfox Access Station Micro.For more detailed information, product updates and online manuals please check micro.sigfox.com.For support, contact your local Sigfox Operator or distributor. 1 minuteLight is Meaning Then ... ONo powerYour Access Station Micro is not powered. Please check the PoE power supply is rmly attached. Red (for a few secs)Power on Your Access Station Micro is powering on. Green – FlashingBooting up (20 – 60 sec)If ashing continue for more than 1 minute contact your support. Green – SolidIn Operation Your Access Station Micro is up and running. Orange – FlashingNo connectivityThe Ethernet cable or USB dongle may be disconnected. Make sure that the cable or dongle is rmly attached. Orange – SolidNo VPN connectionYour Access Station Micro may not be registered correctly. Contact your support. Purple – SolidWarming up (temp < 0°) Cooling down (temp > 55°C)External temperature is too extreme. While your station is in cooling/warming mode, it is not in service. Red – SolidNo Boot If the light remains red after 1 minute your Access Station Micro may need replacement.Contact the support at your point of purchase.Check with your local Sigfox Operator for activation or if any change in the conguration is required.
Package contents you startGetting to Accessories available separately:Sigfox Access Station Micro3G or 4G USB donglePassive PoE injectorSealing coverLEDUSB port (Cellular)Ethernet port (Data+Power)Mounting kitsPower supply adapter(select the correct plug for your region)Ethernet cable Safety noticeThis quick start guide will take you through the few steps required to connect and start using your station.For detailed installation recommendations and product specications, please refer to the Product Manual available in several languages from your Sigfox Operator or online at: micro.sigfox.comFor safety information please refer to the notice included in the box.To use you Access Station Micro, you will need: Internet connection: either by Ethernet port or compatible 3G/4G USB dongle Indoor 220 / 110 V AC power outlet Installing your stationOption : Cellular (back up connectivity)Step 1 Place your stationPlace or x the Access Station Micro at the desired location. Make sure you leave enough space to access the ports and you can see the side to check the LED color.Step 2 Connect your station to the InternetConnect the ethernet cable to the Ethernet port and / or the cellular dongle (if used). For sealing cover addition see instruction in sealing cover pack.Step 3 Power on your stationConnect the PoE injector to the power adapter and plug the adapter to a power outlet.Your station will boot up automatically.Connect the other end of the Ethernet cable to the PoE injector, and the latter to the wall socket or router.

Navigation menu