SHANTOU YESTE ELECTRONIC AND TECHNOLOGY Y37 Bluetooth speaker User Manual

SHANTOU YESTE ELECTRONIC AND TECHNOLOGY CO.,LTD Bluetooth speaker Users Manual

Users Manual

Product specifications：●Bluetooth :3.0+EDR●Support: L2CAP/A2DP(AVCTP/AVDTP/AVRCP), can receive AUDIO signal and control the AUDIO device. support HSP/HFP(Handsfree profile), Built-in Mic for hands-free phone call●Working distance: 10M●SNR: ≥85db●Battery:3.7V 500mAh Mah●Normal volume playing time: 2H●Speaker driver : Ø 40 mm, ●Power : 4Ω/3W ●Frequency response: 120 Hz-18KHz●Unit size：19.5mm*39mm*55mm●Unit weight：142g●Charging：5Ｖ/500mAhProduct Feature:Product Feature:1. International advanced blue-tooth chip and circuit design techniques, support all bluetooth device ;2. With FM function, can search radio station broadcast automatically. 3. With HI-FI speaker, to sure theclear and bright sound quality. 4. Support TF Card,5. Support AUX audio input, connect bluetooth speaker through output devices, for example MP3,MP4,PSP,tablet pc, mobile phone,etc.6. Play music after pairing with bluetooth device for example mobile/ MID/ TV, the working distance is within 10M.key & slot function:key function:1. Power switch: off to close, on is working2. DC 5V charging slot3. Line in:it can play audio via AUX cable to audio device4. Micro SD slot:it can decode and play MP3 format audio when put Micro SD card into the slot5. When play music , press short for last song, press long to turn down the volume.6. When play music , press short for next song, press long to turn up the volume.7. Under bluetooth mode withmobile paired , press short to answer a call , press again to hand up, press long to ring up a call.8. When play music(USB card/ TF card/LINE IN/ bluetooth), press short for "play/pause ".presslong to switch USB/TF/FM /bluetooth/line in. in FM mode, press short to search station automatically, press again to stop searching.NOTE:Under FM mode, put in the AUX cable to get bette Bluetooth speakerFCC NOTE：This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS OR CHANGE TO THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.RF:exposure statementThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.Y37-SP3144

Navigation menu