SEGI JR763AM433 One-Way FM Remote User Manual R1900 FCC ID

SEGI LIMITED One-Way FM Remote R1900 FCC ID

User manual

USER’S GUIDEMR763One-Way AM RemoteFCC ID : VA5JR763AM433This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device. IC ID : 7087A-R763A433Statement: The term “IC:” before the radio certification number only signifiesthat Industry Canada technical specifications were met.CAUTION: The User that modifications to the unit may void the user’s authori-ty to operate the unit
One-Way Remote Owner's Manual2TABLE OF CONTENTSSafety Information....................................................... 3Remote Button Functions............................................. 4Remote Learn Routine................................................. 4Reservation Mode........................................................ 5Valet Mode.................................................................. 6
0.50.50.50.5223.50.50.50.50.50.5222One-Way Remote Owner's Manual4Remote Button FunctionsUnlockAuxiliary Option 1 Auxiliary Option 2Auto -start Function - on/offTrunk ReleasePanic, Press to shut off.Horn - on/offValet Mode - on/offPassive Locking - on/offTimer Start Mode - on/offTurbo Mode - on/offProgramming Menu 1- Installer OnlyProgramming Menu 2- Installer OnlyButtonPress(sec)Function123456789101112131415Lock. If held for 3.5 seconds, it will panic the system.Please take these safety precautions into consideration under the fol-lowing conditions : 1. Servicing the vehicle When servicing your automobile (i.e. changing the oil, washingyour car), the MAGICARsystem should be in Valet Mode. There is a safety shutdown switch under the hood that deactivatesthe remote starter function if the hood is open. However, if theswitch has been damaged or the switch has been installed improperly,the vehicle may start when the button is pressed for 2 seconds, even if the hood is open.2. Loaning your vehicle to others Whenever you loan your vehicle to an individual who is not familiarwith MAGICAR, you may want to put the vehicle in Valet mode.This will prevent the borrower from accidentally activating theMAGICARauto-security system. 3. For manual transmission vehicles If the MAGICARis installed in a manual transmission vehicle, extraprecautions are required because the MAGICARdoes not monitorthe gear shifter : Important! Under normal circumstances, ReservationMode is cancelled when a door or hatchback opens. Please verifythat the opening of any door or hatchback cancels ReservationMode. If any of the doors or hatchback are not monitored by theMAGICARbecause of improper installation or a faulty dome lightswitch, do not use the MAGICARand take your vehicle immediate-ly to the dealer for repair. Do not set Reservation Mode if the window(s) are open or if thereis anyone inside the vehicle, this includes animals. Remote startinstallation in a manual transmission vehicle with a convertible topis not recommended.One-Way Remote Owner's ManualSafety Information3The MAGICAR system will allow up to three remotes to be programmed toone vehicle, and each remote can be programmed to two vehicles. Please per-form the following procedure to add or reprogram new or existing remotes.Remote Learn RoutineNote : "" :Means, to press the button for 2 seconds." () " : Means, to simultaneously press the buttons." () " : Means to simultaneously press the buttons for 2 seconds.2nd car for 30 Seconde
One-Way Remote Owner's Manual6Important Requirements to activate Reservation Mode- The transmission must be in the NEUTRAL position. - The vehicle windows must be rolled up. - Do not set the reservation mode with people in the vehicle. - Do not auto-start the vehicle with people inside it.Activating Reservation Mode( MANUAL TRANSMISSION ONLY )Step 1:After arriving at your destination, and BEFORE TURNING YOUR ENGINE OFF, place the transmission in the Neutral position.Step 2: Activate the parking brake.Step 3: Remove your foot from the foot brake.Step 4: Remove the key from the ignition, and the engine will remain running.Step 5: Exit the vehicle and close the door within twominutes after activating the parking brake. The engine will shut off and reservation mode for the remote starter is now complete.One-Way Remote Owner's Manual5Step 1: Activate Valet/ Programming mode by man-ually turning the ignition on then off (between Acc andOn) five times within seven seconds. The parkinglights will flash once with successful completion ofthis step.Step 2: Within a seven second period after cycling the ignition for the 5th time, Press the button for a 1/2second. The vehicle parking lights will flash once to confirm that the transmitter has beenprogrammed. You can continue programming the additional remotes atThis Time. The parking lights will flash two times when the program-ming mode has expired. In order to auto-start your manual transmission vehicle, you must firstset the MAGICAR system to Reservation Mode before leaving yourvehicle. The purpose of Reservation Mode is to leave the transmissiongear in the neutral position when you leave your vehicle. Reservationmode is intended for use on MANUAL TRANSMISSIONS ONLY and NOT FOR AUTOMATIC TRANSMISSIONS. Reservation Modemust be engaged each and every time you leave your manual transmis-sion vehicle in order to auto-start it.Reservation Mode (manual transmission only)Note : The system is not recommended for manual transmis-sion vehicles with removable or convertible tops. While the vehicle is in valet mode, the only features that will functionwill be the keyless entry and optional auxiliary functions. In order toenter Valet mode, press thebuttons simultaneously for a 1/2second. In order to manually enter Valet Mode, insert your key into the igni-tion and turn the ignition on and off (between ACC and ON)five timeswithin 7 secondsValet ModeTo program remote to a secondary vechicle, press the and buttonssimultaneously for 2.5 senconds. The LED on the remote will begin to flashonce every two seconds, for 30 seconds. This is the 2nd car mode. During thistime you can perform the above programming steps on the vehicle you wish touse as the secondary vehicle.To activate 2nd car mode, press the and buttons simultaneously for2.5 seconds. The LED on the remote will begin to flash once every two seconds, for 30 seconds. During this time, you can use the remote to control the functionof the secondary vehicle.
One-Way Remote Owner's Manual8One-Way Remote Owner's Manual7Safety Information.You can exit Valet Mode only by pressing buttons simultaneously for 1/2 second.Trunk OpenBrake On Hood OpenReservation Off (Manual Transmission Only)1234567Engine OnKey OnDoor OpenDiagnosing problems with Auto-StartIf there is a problem in auto-starting your vehicle,the the MAGICARsystem will do one of two things; if it fails for any of the reasons listed in the table below, it will flash the parkinglights three timesthen flash the error number. Otherwise, it will attempt to start thevehicle three times. If, after three times, the vehicle will not start orstay running, the the MAGICAR system will shut down. In eithercase, please see your istaller to resolve the situation.Error Number( # of times the car chirps & parking lights flash )Error Reason

Navigation menu