SDI Technologies IW2 iHome Airplay Wireless Speaker System User Manual iW2 v3

SDI Technologies Inc. iHome Airplay Wireless Speaker System iW2 v3

UserManual.wiki >

SDI Technologies >

IW2 User Manual

User Manual

iW2 User ManualAirPlay wireless speaker system English www.ihomeaudio.comiHome SleepFREE alarm clock appiHome ConnectWi-Fi Network Setup appiHome RadioInternet radio appworks withavailable on the App Storeworks with

Welcome to the iHome iW2Thank you for choosing iHome. The Air Series represents the new frontier of product oﬀerings from iHome that embrace Wi-Fi connectivity and AirPlay, Apple’s new wireless streaming technology.The iHome iW2 with AirPlay oﬀers the latest experience in home audio entertainment allowing users to stream digital audio over Wi-Fi from iTunes, iPad, iPhone and iPod touch. Featuring SRS TruBass DSP technology, the iW2 oﬀers ﬁdelity audio with a versatile, space-saving design. You can use the iW2 to:Stream music directly from iTunes on your Mac or PC using your home Wi-Fi networkStream your favorite music from your iPad, iPhone, or iPod touch from your iPod library or popular music apps like PANDORA® and iHeartRadio®, available on the App StoreDock, charge, and play audio with your iPad, iPhone, iPod with included USB sync cableAdd Multiple iHome AirPlay speakers to enjoy multi-room audio anywhere in the home (note: streaming to multiple speakers simultaneously requires iTunes as the source)Download and enjoy iHome apps available on the App Store:- iHome Sleep, a free music alarm clock app- iHome Radio, a internet radio music app- iHome Connect, a network setup app for iHome AirPlay enabled productsKeep reading to discover everything you need to know to get the most from your iHome iW2.•••••English 2

3iW2 Overview1. iW2 speaker2. Power adaptor4. USB sync cable5. Remote control6. Document pack EnglishContentsUSB connector works with:iPod touch (1st, 2nd, 3rd, and 4th generation), iPod nano (2nd, 3rd, 4th, 5th, and 6th generation), iPhone 4, iPhone 3GS, iPhone 3G, iPad, and iPad2. AirPlay works with:iTunes, iPod touch (2nd, 3rd, and 4th generation), iPhone 4, iPhone 3GS, iPad 2, and iPad.For AirPlay, the iW2 must be connected to Wi-Fi with networked access to a Mac or PC running iTunes 10.1 or later; or an iPad, iPhone, or iPod touch running iOS 4.2 or later.iHome Apps:iHome Sleep and iHome Radio, and iHome Connect apps only work with iPad, iPhone, iPod touch and requires iOS 4.0 or laterCompatibilityPlace the unit on a level surface away from sources of direct sunlight or excessive hear.Protect your furniture when placing your unit on a natural wood and lacquered ﬁnish. A cloth or other protective material should be placed between it and the furniture.Clean your unit with a soft cloth moistened only with mild soap and watre. Stronger cleaning agents, such as Benzene thinner or similar materials can damage the surface of the unit.Maintenanceremote USB synccablepower adaptorStart Guide iW2 Speakerresetbass trebleRz10

4EnglishiW2 ControlsREMOTEiPod shuﬄe & repeat music playback controlsVolume muteBass and treble adjustmentdefault is 0 for both bass and trebleNOTE: Be sure the remote battery is properly installedbefore using the iW2 remote controlVolume and music controlsMode and power controlSRS TruBassturn DSP audio enhancement on/oﬀEQ resetreturn eq setting to defaultresetbass trebleRz14 Green when touching a button on remote Green, blinking when volume is muted Master power is OFF Green, solid when connected to a Wi-Fi network Red, blinking when NOT connected to a Wi-Fi networkpoweraux-in iPod dock network setupstatus12V 3AUSB iPad, iPhone, & iPod docking(audio & charging)AC powerethernet(direct network connection)REAR PANELTOP PANELWi-Fi network status LEDWi-Fi network setupﬁrmware status LEDvolumeiPod and iTunes music controlsaux-inpowerAirPlay Wireless mode(audio via iOS device or iTunes)iPod mode(audio via USB sync cable or aux-in)status LEDaux-in iPod dock network setupstatus12V 3A

To power the iW2 speaker ON:1. Plug AC adaptor into the iW2 speaker, and plug into a live AC wall outlet.2. Press & hold the Power button (3 seconds) to power the unit ON.Note: Allow 20 seconds for the speaker to startup before interacting with the iW2 speaker.3. Press the Power button to switch between power ON and Standby mode.The iW2 speaker will power ON to AirPlay mode. 6EnglishGetting StartedMaster PowerThe iW2 has a master power mode control interface to power the unit ON or OFF, help conserve energy, and reboot the iW2 speaker. In order for the iW2 speaker to power ON, the unit must be connected to a AC outlet.Master Power ON - Press & hold Power Button (3 seconds) to boot-up and activate your iW2 speaker.Master Power OFF - Press & hold Power Button (3 seconds) a second time to power the iW2 speaker OFF, conserver energy, and reset the unit. Note: If the iW2 is in the Master Power OFF state the iW2 will not support iPad/iPod/iPhone charging, remote control commands, AirPlay, network setup, nor Firmware Updates.Powering your iW2 speaker ONJust like your computer, it is sometimes necessary to reset the iW2 speaker to make sure the unit is working properly. To reset and reboot the iW2 speaker:1. Unplug AC adaptor from the iW2 speaker.2. Press & hold the Power button (3 seconds) to power the unit ON.Note: Allow 20 seconds for the speaker to startup before interacting with the iW2 speaker. The iW2 will store your network settings and automatically reconnect to your network if it is detected after being reset or unplugged from AC power.Reseting your iW2 speakeraux-in iPod dock network setupstatus12V 3A12Voutlet1 2allow 10 seconds to allow system to startup

English 7iPod Mode (iPad/iPhone/iPod not detected via USB dock connector):Using your iW2Power ON modesNote: The AirPlay Wireless button will continuously ﬂash on/oﬀ to indicate that the iW2 is not linked to a network when ON and in AirPlay Wireless mode.iPod Mode (iPad/iPhone/iPod detected via USB dock connector):AirPlay Wireless Mode (connected to a network):AirPlay Wireless Mode (not connected to a network):VolumePress buttons to adjust volume.Standby modeStandby Mode (master power is ON):Press the Power button to place the iW2 speaker in standby mode and stop audio playback. The iW2 speaker has a backlit control interface for power, mode, volume, and music controls. Controls will be lit according to the status of the iW2 speaker and the selected mode.Note: Music transport controls will ﬂash once to signal a proper press.Top panel controlspowerTOP PANELvolumeiPod and iTunes music controlspowerAirPlay Wireless mode(audio via iOS device or iTunes)iPod mode(audio via USB sync cable or aux-in)powerpowerpowerpowerpower

The iW2 has a dedicated Ethernet port that allows you to connect directly to your access point or home network without using Wi-Fi (Ethernet cable not included). To setup your iW2 speaker via Ethernet:1. Disconnect AC power jack.2. Connect ethernet cable to the iW2 and access point router (or network).3. Connect AC power jack and power ON iW2.Renaming your speaker:To rename your iW2 speaker when using a direct Ethernet connec-tion you must use either our iHome Connect app or put the iW2 speaker into “iHome Setup” mode . Please refer to pages 9 & 10 to discover how to change the name of your iW2 speaker.Note: Unplug ethernet cable and re-boot iW2 ﬁrst if you want to switch to Wi-Fi connection .Success!1. Verify that the Network Status LED is green to conﬁrm if the iW2 is successfully connected to a network.2. Keep reading to learn how to use the iW2 and control your iTunes and iOS audio content.Note: To begin using AirPlay wireless streaming, your AirPlay source devices must be connected to the same Wi-Fi network that the iW2 speaker is connected to.English 8Network Setup for AirPlayPlease verify the following steps before attempting to connect your iW2 speaker to a Wi-Fi network:To enjoy AirPlay wireless audio, you must have the following:- iTunes 10.1 or later on a Mac or PC.- iPad, iPhone, or iPod touch with iOS 4.2 or later.- A functioning home network with Wi-Fi.Download the latest software updates for iTunes and your iOS device to ensure that you are able to enjoy the latest AirPlay enhancements and compatibility.Download the iHome Connect app for iPod touch, iPhone and iPad.Have your Wi-Fi network name (SSID) and password (if applicable) available for reference.Verify that your Wi-Fi network and router is discoverable.If you use security for your network, use WPA/WPA2 security (not WEP or WPA/WPA2 enterprise)If you use Ethernet, please enable your router DHCP function.Check listConnecting directly via Ethernet to you home network123Connected Not ConnectedProblem? Reset the iW2 Speaker: - Unplug & reconnect the AC power jack from back of the iW2 speaker- Press & hold power button (3 seconds) - Repeat iW2 Network Setup process if necessary- See Troubleshooting on page 13-16 for other tips.aux-in iPod dock network setupstatus12V 3Anetwork setupstatusaux-in iPod dock network setupstatus12V 3Anetwork setupstatusaux-in iPod dock network setupstatus12V 3A12Vdirectly connect to router or wall ethernet port aux-in iPod dock network setupstatus12V 3Aaux-in iPod dock network setupstatus12V 3A12Vpress & hold power button (3 seconds)to power ON iW2

9EnglishWi-Fi Network SetupIf you have an iPod touch, iPhone, or iPad with iOS 4.0 or later, we recommend that you use our free iHome Connect app for the quickest Wi-Fi network setup experience. To connect your iW2 speaker to a Wi-Fi network using an iOS device, follow these steps:1. Connect AC power and power ON iW2 speaker.1. Dock your iOS device to the iW2 using the included iPod USB sync cable.2. Download our free iHome Connect app from the App Store and launch the app.3. Select your preferred Wi-Fi network from the list of available networks and enter password if prompted.Note: Connecting to a network may take up to 60 seconds. If network connection is unsuccessful reset the unit or disconnect your iOS device and reconnect and repeat the above steps. 4. Rename your iW2 speaker and press ‘Save’ (optional). Success!1. Verify that the Network Status LED is green to conﬁrm if the iW2 is successfully connected to a network.2. Disconnect from “iHome Setup ######” from your Wi-Fi network setting and connect your Mac/PC or iOS device to the same network you connected the iW2 speaker.3. Keep reading to learn how to use the iW2 and control your iTunes and iOS audio content.Note: To begin using AirPlay wireless streaming, your AirPlay source devices must be connected to the same Wi-Fi network that the iW2 speaker is connected to.Option A - Connecting with your iPod touch, iPhone, or iPad (Recommended)Problem? Reset the iW2 Speaker: - Unplug & reconnect the AC power jack from back of the iW2 speaker- Press & hold power button (3 seconds) - Repeat iW2 Network Setup process if necessary- See Troubleshooting on page 13-16 for other tips.Connected Not Connectedaux-in iPod dock network setupstatus12V 3Anetwork setupstatusaux-in iPod dock network setupstatus12V 3Anetwork setupstatus 10:09 PMLivingroom SpeakerName SaveCancelQ W E R T Y U I O PA S D F G H J K LZ X C V B N MWi-FiNameYour Wi-Fi NetworkiHome iW2 2E33Model: iHome iW2 • Firmware: 31.1.0How to use AirPlayAbout iHome Connect10:09 PMWi-FiNameNot ConnectediHome iW2 2E33Model: iHome iW2 • Firmware: 31.1.0How to use AirPlayAbout iHome Connect10:09 PMWi-Fi Networks10:09 PMYour Wi-Fi NetworkChoose a Network for iW2...Other Wi-Fi NetworkSettingsOther Wi-Fi NetworkOther Wi-Fi NetworkOther Wi-Fi NetworkConnect1234Choose your Wi-Fi network from the available networks and wait as the iW2 attempts to connect.This name will be displayed when selecting your speaker from a list of available AirPlay devices.30saux-inbatteryoﬀ | oniPod dockpower reset network setupstatusaux-in iPod dock network setupstatus12V 3A12Vpress & hold power button (3 seconds)to power ON iW2

Network SetupDevice NameSaveCurrent Network:View Network DetailsThis name will be displayed when selecting your speaker from a listof available AirPlay devices.Connect the iW2 speaker to the same network as your AirPlaysource (iTunes, iPad, iPhone, or iPod touch(.iHome iW2Available Networkshttp://192.168.1.12Join NetworkCustomize the name of your speakerSelect your Wi-Finetwork from list30-120s15s45610EnglishWi-Fi Network Setup continued...To connect your iW2 speaker to a Wi-Fi network using a Mac or PC, follow these steps:1. Connect AC power jack and power ON iW2 speaker.2. Press and hold (5 sec.) Network Setup button on the back of unit. Note: The Network Status LED will begin ﬂashing green and the top control panel will also ﬂash. 3. On your Mac or PC, select the network called "iHome Setup ######" from Wi-Fi network settings.Note: This process can take up to 2 minutes. Be patient and refresh your network list if necessary.4. Launch a web browser (ex. Safari, Chrome, or Firefox) and enter http://192.168.1.12 in the address bar.Note: If the page is not initially available or becomes unresponsive, reload the page. See “troubleshooting” if problem persists.5. Rename the iW2 speaker and click ‘Save’. (optional)6. Select preferred Wi-Fi network from the list of available and click ‘Join Network’.Note: Connecting to a network may take up to 120 seconds. If network connection is unsuccessful reset the unit or disconnect your iOS device and reconnect and repeat the above steps. Success!1. Verify that the Network Status LED is green to conﬁrm if the iW2 is successfully connected to a network.2. Disconnect from “iHome Setup ######” from your Wi-Fi network setting and connect your Mac/PC or iOS device to the same network you connected the iW2 speaker.3. Keep reading to learn how to use the iW2 and control your iTunes and iOS audio content.Note: To begin using AirPlay wireless streaming, your AirPlay source devices must be connected to the same Wi-Fi network that the iW2 speaker is connected to..Option B - Connecting with your Mac or PC over Wi-FiProblem? Reset the iW2 Speaker: - Unplug & reconnect the AC power jack from back of the iW2 speaker- Press & hold power button (3 seconds) - Repeat iW2 Network Setup process if necessary- See Troubleshooting on page 13-16 for other tips.Connected Not Connected123aux-in iPod dock network setupstatus12V 3Anetwork setupstatusaux-in iPod dock network setupstatus12V 3Anetwork setupstatusupper right corner of Mac screenlower right corner of PC Screen30s 30sAirPort: OnTurn AirPort OﬀYour Wi-Fi networkAnother networkAnother networkiHome Setup ######Join Other Nework...Create Network...Open Network Preferences...YOUR Wi-Fi NETWORKiHome Setup ######Open Network and Sharing Center9:4201/15/2011Internet accessConnectInformation sent over this networkmiight be visible to others.Currently connected to:aux-in iPod dock network setupstatus12V 3A12Vpress & hold power button (3 seconds)to power ON iW2aux-in iPod dock network setupstatus12V 3Anetwork setupstatuspower

11EnglishMusic ConnectivityYou can connect to your iHome iW2 speaker four diﬀerent ways:1. Using AirPlay® to stream wirelessly from iTunes on your Mac or PC (iTunes can stream to multiple AirPlay speakers).2. Using AirPlay® to stream wirelessly from your iPad, iPhone, and iPod touch (iOS devices stream to only one AirPlay speaker at a time).3. Using the USB iPod docking port on the rear panel with a iPod USB sync cable for audio and charging your iPad, iPhone, or iPod.4. Using an auxiliary audio device (mp3 or CD player) connected to the aux-in port on the rear panel.Connecting to the iW2 speakerAirPlay Wireless Audio ModeEnjoy AirPlay audio anywhere:1. Press to exit standby mode and power the iW2 ON.2. Press for wireless audio mode and listen to AirPlay music.3. Use buttons on the iW2 or iW2 remote to control streaming AirPlay content. Local iPod Audio ModeDock, Charge, & Play using iPod USB sync cable or dock:1. Connect USB sync cable to iW2’s USB port.2. Press Local Playback mode button and enjoy iPod, iPhone, iPad charging and audio playback.3. Using buttons on the iW2 or iW2 remote, in iPod mode, will control your iPod music. Note: Use iPod mode for both iPod docking and Aux-in audio playback.Connect your iOS device to the same Wi-Fi network as iW2. Go to Settings --> Wi-Fi on your iOS device.Tap on iPod/Music app, look for the AirPlay button next to the iPod music transport controls.Tap on the AirPlay icon and choose iW2 from the list of speakers. If the iW2 speaker is not available, restart your iOS device and verify that the iW2 is powered on and connected to the same network.Press play.1.2.3.4.Connect your Mac or PC to the same Wi-Fi network as iW2.Open iTunes on your computer.Within iTunes open “Preferences”, Select the “Devices” tab, and activate the following option: “Allow iTunes control from remote speakers”Click OK, close iTunes preferences.Look for the AirPlay icon in the bottom right corner of the iTunes window.Click the AirPlay icon and choose iW2 from the list of speakers. Click "Multiple Speakers..." to select additional AirPlay speakers. If the iW2 speaker is not available, restart iTunes and verify that the iW2 is powered on and connected to the same network..Press play.1.2.3.4.5.6.7.AirPlay & iPod touch, iPhone, or iPadUsing an iOS device: AirPlay & iTunesUsing a Mac or PC with iTunes:

12EnglishControlThe iW2 features SRS TruBass digital sound processing to enhance the audio performance and ensure proper bass response when listening to your music.The SRS TruBass function is on by default and can only be turned oﬀ or on with the IR remote by pressing the SFX button. The Front Status LED will ﬂash Green when the SRS TruBass eﬀect is turned OFF or ON via the remote.SRS TruBassFirmware updateIt may be necessary to update the ﬁrmware of your iW2 speaker to ensure the latest compatibility and optimal functionality. The iW2’s ﬁrmware can be updated using a USB Mass Storage device containing a new ﬁrmware image downloaded by the user from www.ihomeaudio.com (register for an iHome account on our website to receive emails about FW updates).Using a USB Mass Storage device:1. Download the latest ﬁrmware from www.ihomeaudio.com/airplay/support to your computer.2. Load downloaded ﬁrmware to a USB mass storage device.3. Connect USB device4. Press & Hold (3 sec). 5. iW2 will scan for ﬁrmware ﬁle local to the USB device.If a valid ﬁrmware ﬁle is found, iW2 ﬁrmware will update. If no valid ﬁrmware is found user must reset the iW2, load the proper ﬁle on USB stick, and attempt Firmware update again.Note: You will need to reconnect the iW2 speaker to your home netowrk after a ﬁrmware update.During Firware Update:When Firmware is being Updated, All top panel controls icons will light (left to right) indicating progress of the ﬁrmware update installation. All buttons are inactive except for Reset button. If ﬁrmware update is succcessful, a conﬁrmation (positive) tone will sound.iW2 Speaker Firmware UpdatesThe iW2 has an EQ feature that is controlled via the remote that adjusts Bass and Treble.TREBLE +/- buttons: Adjust treble levels between -5 and +5. Default is 0BASS +/- buttons: Adjust treble levels between -5 and +5. Default is 0Note: The Front Status LED will ﬂash Green 3 times when the eq reaches maximum or minimum and then return to last status settings.RESET button (remote): Resets EQ adjustments to the following state: Bass: 0, Treble: 0. Note: When Reset button is pressed, Top Panel LEDs will ﬂash 2 times and then return to last status settings.EQ100%50%installation = 0%

13EnglishQuestions? Visit www.ihomeaudio.com/support/airplayTroubleshootingQuick tips for problems with network setup:Verify that your router is discoverable (must broadcast itself and not require user to type in the exact name). Verify that the ﬁrmware of your router is up-to-date. Must use WPA/WPA2 security (not WEP, or WPA/WPA2 enterprise). Sometimes moving the iW2 closer to your access point (within 10-6 ft) during network setup. *this can happen sometimes when multiple Wi-Fi networks are creating interference. Try using our free and easy to use iHome Connect app available on the App Store.Use the safari browser (Apple’s software tends to work best with it’s own technology). Refresh the iHome Setup webpage (http://169.254.1.1) and selecting available networks a few times until it shows up. Make sure that the SSID name of your home router consists of normal characters or digits, with no space or special characters like %/#/* inserted. Reset your router and start network setup over again. iW2 Reset: Sometimes you simply need to reset the iW2 and start network setup over again.- Unplug the AC jack or remove the iW2 from the charging base- Slide the rear Power Switch to the OFF and then ON position- Reconnect AC jack, place iW2 on charging base and wait 30 seconds - Repeat iW2 Wi-Fi Network Setup process if necessary 1.2.3.4.5.6.7.8.9.I want to ﬁnd the iW2’s MAC address:Turn on iW2, press and hold network setup button for 4 seconds, and wait for approximated 60 seconds. From your computer, connect to the network named "iHome Setup ######"On a Mac, open the "Terminal" application. On a PC, click Start -> Run, type "cmd" and click OK . When the prompt appears, type "arp -a" and press Enter.You may get a long list of items in response. Please ﬁnd the line that reads similar to "ihome-iW2-e52431.local (169.254.1.1) at c8:d5:fe:e5:24:31 on en1 [ethernet]" where the six hexadecimal pairs (c8:d5:fe:e5:24:31 in this example) represent the MAC address for your iW2.You can use this MAC address in your network's setup to allow the iW2 on your network.Some network conﬁgurations may require you to know the iW2's MAC address. Follow these steps to determine your iW2's MAC address:Network setup when using a hidden SSID:Setting up iW2 requires you to unhide your SSID. Don't worry, this is only temporary.You can use your router's settings to change your security settings to un-hide your network's SSID. After doing so, the iW2 will be able to detect, select, and join your network. Once the network setup is completed, you can re-hide your network's SSID. The iW2 will remain connected to your network after hiding your SSID.1.2.3.4.5.

14EnglishQuestions? Visit www.ihomeaudio.com/support/airplayI’ve successfully connected the iW2 to my home network, but I cannot select the iW2 speaker from iTunes or my iOS Device.The iW2 speaker must be on the same Wi-Fi network as your AirPlay source.Verify you have the latest version of iTunes and/or iOS.Disable the ﬁrewalls software and security software, which may block ports that AirPlay uses to stream content.Try restarting iTunes or your iOS device.Note: The original iPhone, iPhone 3G, and iPod touch (1st gen) do not support AirPlay.1.2.3.4.No AirPlay icon in iTunes or on my iPad/iPhone/iPod touchMake sure that the device has already joined the AirPlay network.Before you open iTunes, make sure that you have enabled Bonjour service in your PC. Take Windows XP for example: to enable the service, you can click Start->Settings->Control Panel, and doubleclick Administrative Tools-> Services->Bonjour Service, then click Start followed by OK on the pop-up menu.Within iTunes open “Preferences”, Select the “Devices” tab, and activate the following option that says “Allow iTunes control from remote speakers.”Try restarting iTunes or your iOS device.Note: The original iPhone, iPhone 3G, and iPod touch (1st gen) do not support AirPlay.1.2.3.4.Problems SolutionI am unable to connect the iW2 to my home Wi-Fi network.Verify that your Wi-Fi network is functioning and Wi-Fi certiﬁed. This device is only compatible with Wi-Fi certiﬁed routers.Move the iW2 closer to your network access point; the Wi-Fi signal is weak or there are overlapping Wi-Fi signals or the iW2 is out of range of your Wi-Fi network. Enable SSID broadcast (un-hide network) on the Wi-Fi router. After you have success-fully connected the iW2 speaker to your Wi-Fi network you can then re-hide the network.Use a WPA or WPA2 Personal key for security. We do not recommend the use any WEP key for security and WPA/WPA2 enterprise is not compatibile with AirPlay.Keep away from potential sources of interference which may aﬀect Wi-Fi signal, such as microwave ovens.Make sure that the SSID name of your home router consists of normal characters or digits, with no space or special characters like %/#/* inserted.If you choose to rename the AirPlay device ‘iHome iW2 XXXX’ in the setting menu, do not use special characters or symbols.Reset the iW2 Hardware and repeat network setup:- Unplug & reconnect the AC power jack from back of the iW2 speaker.- Press & hold power button (3 seconds) to turn the iW2 speaker on and wait 20 seconds for the unit to startup. - Repeat iW2 Wi-Fi Network Setup process if necessaryIf the problem remains, it is strongly recommended to use our free iHome Connect app for your iPod Touch/iPhone/iPad to do the ﬁrst time Wi-Fi setup as some PC settings may aﬀect the Wi-Fi network setup.1.2.3.4.5.6.7.8.9.AirPlay & Network Setup

15EnglishOccasional breaking of AirPlay music streaming. Enable the Auto Channel Scan option (if available on the Wi-Fi router).Enable the Wireless Intelligent Stream Handling (WISH) option (if available on the Wi-Fi router).Enable the Quality of Service (QoS) option (if available on the Wi-Fi router).Move your iW2 speaker closer to your Wi-Fi access point.Change network security settings to WPA (WPA2) Personal. WEP is known to cause issue with AirPlay streaming and we do not recommend this legacy security format.Restart your iPod Touch/iPhone/iPad or iTunes or iW2 speaker.Browsing Internet content like news, music, video and etc. via your home Wi-Fi network from other Wi-Fi devices may aﬀect the AirPlay performance. In case of AirPlay break or disconnection, it is recommended to stop or limit Internet surﬁng.Do one or all of the following:1.2.3.4.5.6.7.Sometimes there is an authentication error with an iOS device (common to any iOS accessory) that causes the device running the iHome Connect app to be unable to detect the iW2. Often times when this happens, the user will correctly connect the iW2 with the USB sync cable, but the app will keep showing the message “Please connect your iHome AirPlay compatible device with an iPod USB sync cable.Problems using the iHome Connect app.I’ve selected the iW2 speaker as my AirPlay audio source, but I do not hear any music.Verify that the volume is not muted or set to 0.Verify that there is not another iTunes library or iOS device connected to the iW2 speaker.Try restarting iTunes or your iOS device.Try restarting your iW2 by lifting the iW2 oﬀ the charging base and switch the rear power switch OFF and then ON.Upgrade the software on your AirPlay compatible device (iTunes, iPad, iPhone, or iPod touch).1.2.3.4Questions? Visit www.ihomeaudio.com/support/airplayVerify sync cable is connected to the rear USB port on the iW2 and securely connected to your iOS device (iPad, iPhone, iPod touch)Restart iHome Connect app (takes 10 sec.)- Exit app and double tap home button- Press & hold iHome connect app- Close app and exit app manager- Restart iHome ConnectRestart iOS device (takes 1 minute)Restart iW2 (takes 30 seconds)- Unplug & reconnect the AC power jack from back of the iW2 speaker.- Press & hold power button (3 seconds) to turn the iW2 speaker on and wait 20 seconds for the unit to startup. - Repeat iW2 Wi-Fi Network Setup process if necessaryNote: iHome Connect only works when docked with iHome AirPlay products and requires iOS 4.0 to work. 1.2.3.4.Problems Solution

Questions? Visit www.ihomeaudio.com/support/airplayVerify that the adaptor is connected and the power outlet is always ‘live’ (not controlled by a wall switch). Reset the iW2 Hardware:- Unplug & reconnect the AC power jack from back of the iW2 speaker.- Press & hold power button (3 seconds) to turn the iW2 speaker on and wait 20 seconds for the unit to startup. 1.2.The iW2 doesn’t respond or doesn’t turn ON.No sound. Verify that the volume is not muted or set to 0.Verify the mode (AirPlay Wireless or iPod mode).Verify iPod or iPhone is properly docked with the USB sync cable and connected to the iW2’s USB port.Verify that there is not another iTunes library or iOS device connected to the iW2 speaker.Check the network connection. Set up the network again if needed.Try restarting iTunes or your iOS device.1.2.3.4.5.6.iPad/iPhone/iPod doesn’t charge or play audio in iPod mode.iPad/iPhone/iPod is not docked properly – Remove disconnect your iPad/iPhone/iPod from the USB sync cable and check for obstruction on the connectors in the USB sync cable, on your iPad/iPhone/iPod, or USB port on the iW2.Reset your iPhone/iPod - Please see the user manual or the Apple web site for details. Typically, holding the sleep button and the home button on a newer iPad, iPhone or iPod will reset it. Upgrade the software on your iPad, iPhone or iPod to the latest version by connecting it to a computer with iTunes installed and checking through iTunes that your unit has the most recent software. Update if needed.Verify that the iW2 is compatible with your iPod or iPhone: iPod touch (1st, 2nd, 3rd, and 4th generation), iPod nano (2nd, 3rd, 4th, 5th, and 6th generation), iPhone 4, iPhone 3GS, and iPhone 3G.1.2.3.4.5.6.Sound crackles, is distorted, has a loud hum or buzzing.Turn the iPod device or other source compent’s volume down.Make sure that the iPod’s device EQ setting is set to “OFF.”Make sure that the USB sync cable is plugged all the way into your iPad, iPhone, or iPod and connected all the way to the iW2’s USB port.Make sure that the audio cable is plugged all the way into the iW2’s Aux Input jack.Replace the aux-in cable or iPod sync cable.Unplug the power supply and connect it to a diﬀerent AC outlet.1.2.3.4.5.16EnglishProblems SolutionGeneral

17EnglishFAQ’sWhat is AirPlay?AirPlay is a wireless audio and video platform designed by Apple to stream digital media over a home network (Wi-Fi or Ethernet). AirPlay is built-in to iTunes and the iPad, iPhone, and iPod touch running the latest software. For AirPlay enabled speakers, this means:1. Consumers can stream their iTunes music to our iW2 AirPlay enabled speaker, their Apple TV, or other AirPlay enabled speakers. 2. iPad/iPhone/iPod touch owners can stream their iPod music AND audio content from other music apps like Pandora and iHeartRadio to our iW2 AirPlay enabled speaker, their Apple TV, or other AirPlay enabled speakers.3. iTunes is unique because a user can stream whatever is playing in iTunes to multiple speakers around the house.4. iOS devices (iPad/iPhone/iPod touch) can only stream to one AirPlay enable device at a time.What other equipment do I require to use iW2 with AirPlay? To use the iHome iW2 with AirPlay will require an Mac or PC running iTunes (10.1 or later), or an Apple iOS device running iOS (4.2 or later) connected to the same network. Typically, a network will consist of a Wi-Fi router or hub.What devices are compatible with AirPlay?AirPlay works with iPod touch (2nd, 3rd, and 4th generation), iPhone 4, iPhone 3GS, iPad 2, iPad with iOS 4.2 and iTunes 10.1 (Mac or PC) or later.What Apple devices are compatible with iW2’s USB dock connector?iW2 supports USB docking for iPhone and iPod for audio and charging with included USB sync cable. The USB connector works with iPod touch (1st, 2nd, 3rd, and 4th generation), iPod nano (2nd, 3rd, 4th, 5th, and 6th generation), iPhone 4, iPhone 3GS, iPhone 3G, iPad 2, and iPad.Can I stream audio wirelessly to the iW2 without a network connection?No, the iW2 and AirPlay audio source must be connected to the same Wi-Fi network via a router or hub.Can I stream video wirelessly to iW2? No, only audio streaming is supported. Does the iW2 have an AUX-input for my TV or other audio device?Yes, the iW2 can be used as a speaker system with many products that have headphone, stereo RCA or optical audio outputs (cable not included).How many iHome iW2 units can I stream to at once?This will depend on your network equipment capabilities and set-up. For Mac/PC with iTunes with a high performance network, up to three iHome iW2’s maybe used. An iPad, iPhone, or iPod touch can only stream to a single iW2 speaker.What Wi-Fi technologies does iW2 support?The iW2 is Wi-Fi certiﬁed to work with networks that use the 802.11b/g wireless standards.What network security types does the iW2 support?The iW2 supports the following security types: Open, WPA Personal (-PSK), WPA2 Personal (-PSK). iHome does not recommend using iW2 on security networks conﬁgured with WEP security due to inconsistencies in compatibility with that aging security standard. The iW2 does not support WPA/WPA2 Enterprise security types. For instructions on changing security types of your home network, refer to your Wi-Fi access-point's documentation. For best results, ensure your Wi-Fi access point is WiFi-certiﬁed and is conﬁgured to support 802.11g communications.

Safety Instructions1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. 2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the ﬂow of air through the ventilation openings.3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including ampliﬁers) that produce heat.4. Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.5. Power Cable Protection – Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket. 6. Cleaning – The unit should be cleaned only as recommended. See the Maintenance section of this manual for cleaning instructions.7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product.8 Attachments – Do not use attachments not recommended by the product manufacturer.9 Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of ﬁre or electric shock.11. Damage Requiring Service – The unit should be serviced by qualiﬁed service personnel when:A. the power supply cable or plug has been damaged.B. objects have fallen into or liquid has been spilled into the enclosure.C. the unit has been exposed to rain.D. the unit has been dropped or the enclosure damaged.E. the unit exhibits a marked change in performance or does not operate normally.12. Antenna – Do not connect an external antenna to the unit (other than that provided).13. Periods of None Use – If the unit is to be left unused for an extended period of time, such as a month or longer, the power cable should be unplugged from the unit to prevent damage or corrosion. 14. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not covered in the operating instructions should be referred to qualiﬁed service personnel.18EnglishConsumer Product Safety GuideFCC Radiation Exposure StatementFCC ID: EMOiW2. IC: 986B-iW2This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.This Device complies with RSS-210 of the IC Rules; Operation is subject to the following two conditions: 1. This device may not cause interference and 2. This device must accept any interference received, including interference that may cause undesired operationThis device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. (FCC15.19) Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf. This equipment complies with the limits for a Class B digital device as speciﬁed in Part 15 of FCC Rules. These limits provide reasonable protection against radio and TV interference in a residential area. However, your equipment might cause TV or radio interference even when it is operating properly. To eliminate interference you can try one or more of the following corrective measures:• Reorient or relocate the receiving antenna.• Increase the distance between the equipment and the radio or TV.• Use outlets on diﬀerent electrical circuits for the equipment and the radio or TV.• Consult your dealer or an experienced radio/television technician if the problem still exists.Modifying or tampering with your system’s internal components can cause a malfunction and might invalidate the system’s warranty and void your FCC authorization to operate it.The separation distance between the equipment and the user shall not be less than 20 cmThis Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Disclaimer of Warranty:NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence or willful actions, misuse or accident, or which have been modiﬁed or repaired by unauthor-ized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, computers, routers, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner.This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser. In no event will SDI Technologies or any of its aﬃliates, contractors, resellers, their oﬃcers, directors, shareholders, mem-bers or agents be liable to you or any third party for any consequen-tial or incidental damages, any lost proﬁts, actual, exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you speciﬁc legal rights, and you may also have other rights which vary from state to state.Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractu-ally binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI Technologies product. 19EnglishWarrantyLimited 1 Year Warranty InformationiHome, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 1 Year from the date of original purchase.Should this product fail to function in a satisfactory manner, it is best to ﬁrst return it to the store where it was originally purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, SDI Technologies will repair or, at its discretion, replace this product without charge (except for a $30.00 charge for handling, packing, return UPS/postage, and insurance). This decision is subject to veriﬁcation of the defect or malfunction upon delivery of this product to the Factory Service Center listed below. The product must include proof of purchase, including date of purchase. The fee for service without proof of purchase is $75.00. Before returning this product for service: Before returning this product for service, please check our support section at www.ihomeaudio.com/support or call our customer service team to resolve any problems you may be experiencing.If service is still required:Pack unit in a well padded, heavy corrugated box.Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase, if within the warranty period.Enclose a check or money order payable to the order of SDI Technologies, for the sum of $30.00 ($70.00 without proof of purchase).Send the unit prepaid and insured, to the Factory Service Center listed below. Questions? Visit www.ihomeaudio/airplay/support.com Toll Free Customer Service: 1-877-446-6301©SDI Technologies 2011 All rights Reserved.1.2.3.4.Consumer Repair DepartmentSDI Technologies Inc.1330 Goodyear Dr.El Paso, TX 79936-6420

www.ihomeaudio.com

Navigation menu