RunCam Technology SPLIT Camera User Manual

RunCam Technology (Shenzhen) Co., Ltd. Camera Users Manual

User Manual

User ManualRunCam OPENLOCK·MicroSD CardCapacity up to 64GB; Please use high speed cards(Class10/UHS-I/UHS-II).·Lens module connection diagramOPEN21LOCK12Warning: WiFi module is removable. Please insert the WiFi module in the correct direction! Otherwise the module could be damaged.(WiFi module)·WiFi module connection diagram·Instruction diagramSide ALED 1: Blue ——WiFi status lightLED 2: Green ——Photo mode status lightLED 3: Blue —— Video mode status lightLED 4: Orange —— OSD Setup status lightLED 5: Red —— Power Status Light: Blinking during operation (solid red while charging)WiFi module connectorSide BPower/Shutter ButtonMicro-USBSensor connectorWiFi/Mode Switch ButtonWarning: When connecting to a computer via USB, please cut off the power of the drone firstly. USB or 3 pin power interface only supports DC 5V power supply. Battery solder joints only support 4.2V lithium-ion battery.TXRXGNDAudio+5V (1A)GNDVideo-BAT+BAT (4.2V)MicrophoneBuzzer LED 1LED 2LED 3LED 4LED 5·App(Android | iOS)Search 'RunCam App' on Google Play/Apple Store, or download on our website:runcam.com/download/runcamSplitDefault SSID: RCSplit_ ****** (* for letters or numbers)Default WiFi password: 1234567890·Check Complete User ManualPlease visit：runcam.com/download/runcamSplit·Basic Camera OperationPowering On/OWiFi On/OMode SwitchingVideo ModePhoto ModeOSD Setup ModeForced ShutdownResetLong press the Power/Shutter buttonShort press the WiFi/Mode Switch buttonAfter powering on, long press the WiFi/Mode Switch button to cycle through the three modes: Video/Photos/OSD settings.Camera Status Light: Blue (LED 3)• Press the Power/Shutter button to start/stop recording.Camera Status Light: Green (LED 2)• Press the Power/Shutter button to capture photos.Camera Status Light: Orange (LED 4)• Press the Power/Shutter button to move to a setting.• Press the WiFi/Mode Switch button to select.• Long press the WiFi/Mode Switch button to exit the menu.Simultaneously press the Power/Shutter button and WiFi/Mode Switch button.In standby mode, press the WiFi/Mode Switch button three times in rapid succession (within 2 seconds). When resetting is complete, the status light (orange) blicks twice, and the camera automatically shuts dows.www.runcam.com+5VGNDVideoAudioGNDPower inGND Transmitter5V 12VPDB·5.8G Transmitter connection diagramThe module is designed to comply with the FCC statements. FCC ID: XXXXXXthe final device should contain the following text: "Contains FCC ID:XXXXXX”
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. RF warning statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Navigation menu