Ruckus Wireless ZF7441 IEEE 802.11 a/b/g/n Access Point User Manual Ruckus Wireless AP ZF2942 7942 Quick Setup Guide

Ruckus Wireless, Inc. IEEE 802.11 a/b/g/n Access Point Ruckus Wireless AP ZF2942 7942 Quick Setup Guide

Contents

Installation Guide

Copyright © 2013 Ruckus Wireless, Inc. Page 1 of 2Published April 2013, Part Number 800-70437-001 Rev AZoneFlex 7441 Dual Band 802.11n DAS Access Point Quick Setup GuideThis Quick Setup Guide provides step-by-step instructions on how to set up your Ruckus Wireless ZoneFlex Access Point. After completing the steps described in this Guide, you will be able to place the Access Point (AP) at your site and provide wireless network access to users.BEFORE YOU BEGINBefore deploying Ruckus Wireless products, please check for the latest software and the release documentation.• User Guides and Release Notes are available at http://support.ruckuswireless.com/documents.• Software Upgrades are available athttp://support.ruckuswireless.com/software.• Open Source information is available athttp://opensource.ruckuswireless.com.• Software License and Limited Warranty available at http://support.ruckuswireless.com/warranty.PACKAGE CONTENTS• ZoneFlex 7441 Access Point• ZoneFlex 7441 Installation Guide• Mounting Brackets• Mounting accessory bag (DIN rail clip, 4 screws for mounting ears, terminal ring for ground wire)• Regulatory flyer• Declaration of Conformity (country-dependent)• Product Warranty Statement•This Quick Setup GuideSETUP REQUIREMENTS• A computer running Windows 7 (procedures for other OS’s are similar)• One or more of the following:• A modem (DSL or cable), broadband router, or other device provided by your Internet Service Provider that brings Internet access to your site. • A network switch or a DSL/Internet gateway device.• An Ethernet cable (Cat5e or better for PoE in)• An AC power adapter (sold separately), or• An 802.3af or 802.3at -compliant Power over Ethernet (PoE) switch or PoE injector, or• AC/DC adapter 12V 1.5A (Ruckus part #902-0169-xx00, or equivalent)STEP 1: CONNECT THE AP TO YOUR COMPUTERFigure 1. ZoneFlex 7441 DAS Access Point1After removing your Ruckus Wireless AP from its package, place it next to your computer.2Using an Ethernet cable, connect your computer’s network port to the 10/100/1000 port on the AP. 3Using the AC adapter (sold separately), connect the AP to a convenient (and protected) power source. • Alternatively, connect the 10/100/1000 port to a PoE injector or PoE switch for both power and network con-nectivity.4Verify that the Power LED on the external enclosure is a steady green. STEP 2: PREPARE YOUR COMPUTER FOR AP SETUP1On your Windows 7 computer, configure your network adapter from the Local Area Connection settings as follows:•Start > Control Panel > Network and Sharing Center > Change Adapter Settings2Edit the TCP/IPv4 address settings as follows: •Local Area Connection > Properties > Internet Protocol Version 4 (TCP/IPv4) > PropertiesThe TCP/IPv4 Properties dialog box appears.3Select Use the following IP address (if it is not already selected) and then make the following entries:•IP address: 192.168.0.22 (or any address in the 192.168.0.x network)•Subnet mask: 255.255.255.0•Default gateway: 192.168.0.1Leave the DNS server fields empty.4Click OK to save your changes.Your changes are put into effect immediately. STEP 3: LOG INTO THE APAs specified earlier, the AP should be directly connected to your computer (through the Ethernet port) and powered on, ready for setup.1On your computer, open a Web browser window.2In the browser, type this URL to connect to the AP: https://192.168.0.13Press <Enter> to initiate the connection. When a security alert dialog box appears, click OK/Yes to proceed.4When the Ruckus Wireless Admin login page appears, enter the following: •Username: super•Password: sp-admin5Click Login.IMPORTANT!If the AP is deployed with a ZoneDirector, follow the ZoneDirector Quick Setup Guide, and connect the AP to your local network.NOTE:The following procedures assume Windows 7 as the operating system. Procedures for other OS’s are similar.IMPORTANT!Write down all of the currently active settings so you can restore your computer to its current configuration later (when this process is complete).Default AP Settings (For Your Reference)Network Names (SSIDs)Wireless1—Wireless8Security (Encryption method)Disabled for each wireless interfaceDefault Management IP Address192.168.0.1
Copyright © 2013 Ruckus Wireless, Inc. Page 2 of 2Published April 2013, Part Number 800-70437-001 Rev ASTEP 4: CUSTOMIZE THE WIRELESS SETTINGS1On the Web interface menu, click Configuration > Wire-less. The Configure :: Wireless :: Common options appear. 2Verify that the following options are active:•Channel: SmartSelect•Country Code: If you are not located in the United States, select your current country. 3Click Update Settings if you made any changes.4Click any of the eight “Wireless #” tabs at the top of the page. 5In Wireless Availability, click Enabled.6Delete the text in the SSID field, and then type a name for your network that will help your users identify the AP in their wireless network connection application.7Click Update Settings to save your changes.8Repeat Steps 4-7 for each Wireless # interface that you want to enable. 9Click Logout to exit the Web interface.STEP 5: PLACE THE AP IN YOUR SITE 1Move the AP to its permanent location (accessible to both AC power and network connection). 2Use an Ethernet cable to connect the 10/100/1000 port of the AP to your network.3Connect the AC power adapter (or PoE power supply) to the AP, then to a convenient power source.4Verify that the 10/100/1000 port LED is lit.Congratulations! Your wireless network is active and ready for use. (OPTIONAL) MOUNTING INSTRUCTIONSThe ZoneFlex 7441 mounting options include desktop, wall mounting (flat), wall mounting (horizontal), and DIN rail mounting. Wall Mounting (Flat)1Attach the wall mounting brackets to the ZoneFlex 7441 as shown in Figure 2. Figure 2. Flat wall mount2Place the AP on the wall and mark the locations for screw holes. 3Drill screw holes, place the AP onto the wall and insert screws. Wall Mounting (Horizontal)The ZoneFlex 7441 can be mounted to a wall horizontally as shown in Figure 3. Figure 3. Horizontal wall mount1Attach the brackets to the AP as shown in Figure 3.2Place the AP on the wall and mark the locations for screw holes. 3Drill screw holes, place the AP onto the wall and insert screws. DIN Rail MountingUse the DIN rail clip on the rear of the AP to connect mount to a DIN rail. 1Remove the screw on the housing back wall and use to attach the DIN rail clip to the rear of the AP as shown in Fig-ure 4. The clip has a tab to prevent rotation which fits into the corresponding slot in the housing. Figure 4. DIN rail clip 2Mount the AP to the DIN rail as shown in Figure 5.Figure 5. DIN rail mountingGrounding the Access Point1Attach ground wire to the AP using the included terminal ring and two hex nuts as shown in Figure 6. The terminal ring can accommodate wire sizes ranging from 16 to 25 gauge. Figure 6. Grounding the APDIN Rail RemovalA large, flat screwdriver inserted from the bottom of the product can be used to pry the clip off the rail.NOTE: If you will be using PoE, you will need a Cat5e (or better) Ethernet cable to connect the AP to the PoE injector or switch.

Navigation menu