Risco RWRT433 Wireless Sounder User Manual 5INRWS50 C FCC

Risco Ltd. Wireless Sounder 5INRWS50 C FCC

Users Manual Revised

Wireless Sounder Wireless ExternalSounderWireless InternalSounder Installation and Programming Instructions
2 Wireless Sounder Instructions Table Of Contents Introduction........................................................................................................... 3 Operational Functions.......................................................................................... 3 Alarm / Tamper Indication ...................................................................................3 Low Battery Indication.........................................................................................3 Supervision .........................................................................................................3 Pre Alarm Indication............................................................................................3 Self Testing .........................................................................................................3 Installation LED Indication...................................................................................3 Installation............................................................................................................. 4 Mounting the External Sounder...........................................................................4 Mounting the Internal Sounder............................................................................6 Programming Instructions ................................................................................... 7 Engineer Programming Menu .............................................................................7 [9][2][1] Siren: Allocation ............................................................................... 7 [9][2][2] Siren: Parameters ............................................................................ 8 [9][2][3] Siren: Communication Test .............................................................. 9 [9][2][4] Siren Receiver Calibration.............................................................. 10 [9][2][5] Siren: Tamper Mute........................................................................ 10 [1][1][9] Siren Supervision Time .................................................................. 10 [1][2][35] Siren Pre Alarm Feature............................................................... 11 [6][2][6][4] Siren Report Codes.................................................................... 11 Event Log Messages................................................................................... 12 User Programming Menu ..................................................................................13 Diagnostics.................................................................................................. 13 Siren Version............................................................................................... 13 Replacing Batteries ............................................................................................ 14 Technical Information......................................................................................... 14 Electrical ...........................................................................................................14 Radio.................................................................................................................14 Environmental ...................................................................................................14
Wireless Sounder Instructions 3 Introduction RISCO Group's two-way wireless sounders are designed to extend the signaling capabilities of the Risco Group wireless systems within the protected area. The wireless sounders offer an easy and flexible solution for quick installations. The sounders are powered by their own batteries and communicate wirelessly with the security panel using 868MHz or 433MHz frequency band. Up to 3 wireless sounders (external or internal) can be assigned to a system. * Sounder and siren are used interchangeably in this document. Operational Functions Alarm / Tamper Indication Upon an alarm condition, the sounder sound will be activated for a period of time defined by the system (the Bell Time Out parameter). The maximum time that the sound will be activated is 5 minutes. Low Battery Indication Upon a low battery condition a trouble indication is sent to the panel. There are 2 types of low battery indications:  Radio low battery  Speaker low battery Supervision Each sounder can be defined to be supervised by the panel. The system generates a local trouble signal identifying the sounder which its signal is not received during a predefined time, followed by a report to the Central Station (if defined). Pre Alarm Indication When an entry time starts, the system transmits a pre-alarm signal to the sounder. If the system is disarmed before the entry delay time expires a cancellation signal is sent to the sounder. If the sounder does not receive a canceling signal within the entry delay time, the sounder will be activated. NOTE: This feature is programmable. For more information please refer to page 11. Self Testing Upon pressing on the reset switch located on the PCB, the sounder performs a functional self test. The strobe flashes and a squawk will sound. Remote testing can be performed from the system keypad or using the Upload/Download software. Installation LED Indication The sounder incorporate two LEDs located on the PCB. These LEDs are enabled when the tamper is open and 10 minutes after the tamper is closed. Red Only: Indicates transmission time Yellow Only: Indicates low battery Red + Yellow (3 seconds): Confirmation of successful learning mode.
4 Wireless Sounder Instructions Installation Use the following instructions to mount the external and internal wireless sounders. Mounting the External Sounder 1) Open the screw cover by applying thumb pressure on the screw cover lower part. When raised, push outwards. Once you have gained access to the cover screw, open screw and lift the cover away until cleared from the back plate. Siren coverscrewScrew cover -Lower section 2) Once the cover has been removed it may be slid into one of the Cover Holder Clips. This is done by placing the cover next to the cover holding clips and then sliding it into place. To release cover, press the release tab and slide cover out. 3) To reach the PCB release the inner cover and lift the cover until it locks in the raised position. Release TabsCover HolderClipsSliding pattern of Tabinto the Cover holder clipsCover - Exploded ViewTabRetaining Clip -Inner Cover 4) Position the sounder base plate against the wall and mark the securing holes according to the strobe required position. The unit should be mounted to the wall using at least three 2" No 10 screws and suitable wall anchors. Fixing points withstrobe at the bottomStrobeFixing points withstrobe at the topStrobe
Wireless Sounder Instructions 5 5) Insert the supplied batteries in the metal clips according to the polarity. 6) The sounder is ready for communication set up with the system. 7) Once the communication set up is completed, close the inner cover and reattach the outer cover. Speaker & StrobeBatteries(6V, SerialConnection)SpeakerStrobeLEDSTwo IndicationLEDsReset SwitchSPEAKERTAMPERRadio Batteries(3V, ParallelConnection) External Sounder - PCB Diagram
6 Wireless Sounder Instructions Mounting the Internal Sounder Remove coverlocking screw 1. Open the front cover by removing the cover locking screw located at the bottom of the unit. 2. Hold the back plate against the wall and mark the locations of the mounting holes. Drill the desired mounting holes and insert screw anchors. 3. Mount the back unit to the wall using the supplied screws. 4. Insert the supplied batteries paying attention to the polarity 5. Perform communication set up with the control panel 6. Once communication setup is completed, close the cover and locking screw. Fixing Points toWall Speaker Batteries(6V, SerialConnection)SpeakerResetSwitchSPEAKERTAMPERTwo IndicationLEDsTamperRadio Batteries(3V, ParallelConnection) Internal Sounder - PCB Diagram
Wireless Sounder Instructions 7 Programming Instructions The following section describes programming options added relating to the programming of the wireless sounder. Up to 3 wireless sounders (external or internal) can be assigned to the system. We recommend reading and fully understanding the system Installation and User manuals, before programming the sounder. Engineer Programming Menu  To access the sounder menu 1. From the main engineer menu press [9] to access the More "Devices menu". 2. Press [2] for Siren. 3. You are now in the sounder submenus as described below. [9][2][1] Siren: Allocation The sounder must identify itself to the system's receiver by writing its ID into the System.  Step 1: Introducing the Sounder to the System 1. After accessing the siren menu, press [1] for the Allocation menu 2. Select the sounder ID you want to assign. 3. Place the cursor over the Type filed. Use the key to choose one of the following options and then press [#] :  NONE  ODWS1: Outdoor wireless sounder  INWS1: Indoor wireless sounder NOTE: After selecting the NONE option the system will ask you whether to erase the sounder or not. 4. Use the key to choose if the sounder will be audible [Y] or silent [N] and press [#]. 5. Use the key to choose if the squawk sound will be audible [Y] or silent [N] and press [#]. 6. Use the key to choose if the squawk strobe is enabled [Y] or disabled [N] and press [#]. NOTE: The definition of the squawk strobe is applicable only for the outdoor (ODWS1) sounder.
8 Wireless Sounder Instructions  Step 2: Setting communication with the system 1. After adding the sounder to the panel, the sounder must identify itself to the system's receiver by writing its ID into the system's receiver. Select the appropriate option as follows:  Press [1] to Skip to the next sounder assignment  Press [2] to allocate the sounder into the system. Send a write signal (within 255 seconds) from the sounder as follows: a. Press the reset switch on the sounder. b. After a squawk is sounded and the sounder's strobe flashes (only in outdoor sounder) you have 10 seconds to press on the tamper switch for at least 3 seconds. If the sounder is successfully recognized, the system will sound a confirmation beep, the sounder will initiate a squawk sound and the 2 LEDs on the sounder will flash for 3 seconds.  Press [3] to erase the sounder from the system memory.  Press [4] to select whether the sounder will be supervised or not. 2. Repeat the process for other sounders in the system (up to 3). [9][2][2] Siren: Parameters Using this menu you can define parameters that reflect the operation of the sounder.  To set the sounder parameters 1. From the engineer menu, access the siren parameters submenu, Quick Key [9][2][2]. 2. Enter the number of the sounder that you want to program and then press [#]. You can now program the sounder parameters. NOTE: For internal sounder (INWS1) only the Volume parameter is available. Siren: Parameters Quick Keys Parameter [9][2][2][1] Strobe Control Defines the Strobe operation mode. [9][2][2][1] [1] Always Off The strobe is deactivated [9][2][2][1] [2] Follow Bell (Default) The strobe is activated when the sounder bell is triggered. [9][2][2][1] [3] Follow Alarm The strobe is activated when an alarm event occurs in the system.
Wireless Sounder Instructions 9 [9][2][2][2] Strobe Blink Defines the number of times that the strobe will flash per minute. [9][2][2][2] [1]..[5] Strobe Blink options [1] 20 times per minute [2] 30 times per minute [3] 40 times per minute (Default) [4] 50 times per minute [5] 60 times per minute [9][2][2][3] Strobe Arm Squawk Default: 05 Range: 01-20 (seconds) The time that strobe blinking will continue when arm is performed. NOTE: If the sounder’s squawk strobe is defined as NO (Refer to Allocation section) this parameter will be ignored. [9][2][2][4] Volume Defines the sounder sound volume for the following system modes. The sound volume range is between 0 (silent) to 5 (maximum volume). [9][2][2][4] [1] Exit / Entry The sound produced during exit/entry time Default: 0 [9][2][2][4] [2] Alarm The sound produced during alarm. (Default: 9) [9][2][2][4] [3] Squawk The sound produced during squawk sounds (Default: 9) [9][2][3] Siren: Communication Test The sounder communication test performs a communication test between the sounder receiver and the system. The value displayed indicates the receiving level of the signal sent from the system to the sounder's receiver.  To perform communication test 1. From the engineer menu access the siren communication test submenu, Quick Key [9][2][3]. 2. The system sends a test signal to the sounders. A number between 00-99 indicates the strength of the communication signal between the system and the sounder. NOTE: For successful communication, the strength of the signal should be higher that the sounder receiver noise threshold level (see quick key [9][2][4]) .
10 Wireless Sounder Instructions [9][2][4] Siren Receiver Calibration This feature establishes the threshold noise level of the wireless sounder receiver for successful communication with the system.  To calibrate the sounder receiver 1. From the engineer menu access the siren receiver calibration submenu, Quick Key [9][2][4]. 2. Select the sounder for which you want to calibrate its receiver. 3. To perform a new automatic calibration, use the key to select [Y]. After the calibration process is accomplished, the new noise threshold level is displayed. 4. To confirm the new threshold level, press [#] or change the threshold level manually and then press [#]. [9][2][5] Siren: Tamper Mute Selecting this option will disable the tamper sound during the current installation programming period. NOTE: An ongoing tamper alarm will not be disabled. [1][1][9] Siren Supervision Time System: Timers Quick Keys Parameter Default Range [1][1][9] Accessory Supervision Time 60 minutes 00-255 minutes Specifies the siren supervision time parameter, i.e. if set to 60 minutes the siren will send a supervision signal every 60 minutes. If any of the sounders does not transmit to the panel at least once, during the supervision time of the system receiver (Quick Key [1][3][3] ) the system will regard the sounder as Lost. IMPORTANT: The supervision time of the system receiver (Quick key [1][3][3]) should be higher than the accessory supervision time ([1][1][9]) in order to eliminate false lost event.
Wireless Sounder Instructions 11 [1][2][35] Siren Pre Alarm Feature This wireless sounder incorporates a pre alarm feature that enhances the security of the system, by producing a local alarm in case of the sabotage. NOTE: In the UK version of the system the quick key of this parameter is [1][2][44]. System: Control Quick Keys Parameter Default [1][2][35] Siren Pre Alarm No Specifies if the system will send a Pre Alarm message to the sounder while an entry delay starts. Yes: The system sends a pre alarm signal to the sounder at the beginning of the entry delay. If the sounder does not receive a cancellation signal from the system at the end of the entry time, the sounder goes into alarm. No: Pre Alarm disabled [6][2][6][4] Siren Report Codes The following are the new report codes related to the wireless sounders. Report codes  Manual Wireless Siren Quick Keys Parameter [6][2][6][4] [1] Tamper Tamper alarm from sounder X [6][2][6][4] [2] Tamper Restore Tamper alarm restore from sounder X [6][2][6][4] [3] Battery Trouble Report code for a low battery condition in a wireless sounder [6][2][6][4] [4] Battery Trouble Restore Report code for the correction of a low battery condition [6][2][6][4] [5] Lost Trouble A report code that indicates the following condition: If any of the sounders does not respond to any request from the system, during the supervision time of the system receiver (Quick Key [1][3][3] ), the system will regard the sounder as Lost. [6][2][6][4] [6] Lost Trouble Restore Restore is established when the system receives any signal from the sounder.
12 Wireless Sounder Instructions Event Log Messages The following list details the wireless sounder dedicated event messages, as displayed on the system LCD display: LCD Text Event Description Tamper Siren=X Tamper alarm from wireless sounder X Tmp rstr Siren=X Tamper alarm restore from wireless sounder X Spkr low bat S=X Speaker low battery trouble Spkr l.bat rsS=X Speaker low battery restore from sounder X Radio l.bat S=X Radio low battery trouble Radio l.bat rs=X Radio (Transceiver) low battery restore from sounder X Siren=X Lost Sounder X is regarded as lost following supervision test. Siren=X Lost Rst The System received a signal from sounder X after it has been regarded as lost
Wireless Sounder Instructions 13 User Programming Menu Diagnostics The diagnostics menu enables to test parameters that reflect the operation of the sounder.  To perform diagnostics: 1. From the user menu press [] [4] to access the Maintenance menu. 2. Enter the Engineer code (or sub-engineer) and press [#]. 3. Press [7][1] to access the Siren diagnostic menu. 4. Enter the digit representing the sounder you want to test and then press [#]. The system will perform the diagnostics test and a list of test parameters will appear, as indicated in the table below. 5. Use the arrow keys to view the diagnostics test results. NOTE: The diagnostic features can be also performed from Upload/Download software, locally or remotely. Maintenance: Siren Diagnostics Quick Keys Parameter [4][7][1] Siren Diagnostics Speaker batteries voltage: Tests the selected sounder’s speaker batteries voltage. Radio (Transceiver) batteries voltage: Tests the selected sounder’s radio's batteries voltage. Siren Version This menu displays information regarding the sounder's version. Repeat steps 1 to 4 in the Siren diagnostic section with the exception of pressing [7][2] in step 3 for the Siren version option. Maintenance: Siren Version [4][7][2] Siren Version  Sounder part number: F=Frequency (868MHz / 433MHz) V=Siren type (Internal/External), C= lens Color  Sounder software version  Sounder software date  Sounder software checksum
14 Wireless Sounder Instructions Replacing Batteries 1. To silence the tamper alarm enter the engineer programming mode, quick key [9][2][5] and activate the Tamper Mute option. 2. Remove the sounder cover as described in the installation section. NOTE: If required you can silence a tamper alarm by pressing the RESET Switch. 3. Remove the old batteries from the metal clips and replace with new ones. Pay attention to the polarity. 4. Press the RESET switch. 5. Close the cover and fasten the cover locking screw. NOTE: Dispose of batteries according to your local regulations Technical Information Electrical Power Supply 5 X CR123, 3V Lithium Battery (3 batteries for the Radio Transceiver, 2 batteries for the Speaker/Strobe, see External and Internal Sounder - PCB Diagrams on pages 5 and 6) Battery life 3 years (typical) Speaker sound level 105 dB @ 1 meters (adjustable) Strobe lens (External sounder) Polycarbonate, available in amber, red, blue or transparent Strobe flash rate (External sounder) 60 times per minute (maximum) Size: External sounder (HxWxD) 300x 325x70 mm (11.8 x12.8x2.8 inch) Size: Internal sounder (HxWxD) 145 x 120 x 50 mm (5.7x4.7x2 inch) External sounder Weight (batteries included) 1 Kg (35.2 oz) Internal sounder Weight (batteries included) 0.44Kg (15.52 oz) Radio Radio type Two Way Narrow band Frequency 868 MHz or 433MHz Range up to: 150m (492’) Line of sight Supervision Yes Modulation Type ASK Environmental Temperature -25°C to 60°C (-4°F to 140°F) IP Rating IP 44 Environmental Class Class IV
Wireless Sounder Instructions 15 FCC & IC notes This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment into an outlet on to a different circuit from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment which are not expressly approved by the party responsible for compliance (RISCO Ltd) could void the user's authority to operate the equipment. FCC ID: JE4RWRT433 IC: 6564-RWRT433 RTTE Compliance Statement Hereby, RISCO Group Ltd, declares that these products (Wireless external siren and wireless internal siren) are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
16 Wireless Sounder Instructions RISCO Group Limited Warranty RISCO Group Ltd. and its subsidiaries and affiliates ("Seller") warrants its products to be free from defects in materials and workmanship under normal use for 12 months from the date of production. Because Seller does not install or connect the product and because the product may be used in conjunction with products not manufactured by the Seller, Seller cannot guarantee the performance of the security system which uses this product. Seller's obligation and liability under this warranty is expressly limited to repairing and replacing, at Seller's option, within a reasonable time after the date of delivery, any product not meeting the specifications. Seller makes no other warranty, expressed or implied, and makes no warranty of merchantability or of fitness for any particular purpose. In no case shall seller be liable for any consequential or incidental damages for breach of this or any other warranty, expressed or implied, or upon any other basis of liability whatsoever. Seller's obligation under this warranty shall not include any transportation charges or costs of installation or any liability for direct, indirect, or consequential damages or delay. Seller does not represent that its product may not be compromised or circumvented; that the product will prevent any persona; injury or property loss by burglary, robbery, fire or otherwise; or that the product will in all cases provide adequate warning or protection. Buyer understands that a properly installed and maintained alarm may only reduce the risk of burglary, robbery or fire without warning, but is not insurance or a guaranty that such will not occur or that there will be no personal injury or property loss as a result. Consequently seller shall have no liability for any personal injury, property damage or loss based on a claim that the product fails to give warning. However, if seller is held liable, whether directly or indirectly, for any loss or damage arising from under this limited warranty or otherwise, regardless of cause or origin, sellers maximum liability shall not exceed the purchase price of the product, which shall be complete and exclusive remedy against seller. No employee or representative of Seller is authorized to change this warranty in any way or grant any other warranty. WARNING: This product should be tested at least once a week.
Contacting RISCO Group RISCO Group Ltd. is committed to customer service and product support. You can contact us through our website (www.riscogroup.com) or at the following addresses: UNITED KINGDOM - RISCO Group U.K. Ltd. National Sales number: 0870 60 510000 Tel: +44-161-655-5500 Fax: +44-161-655-5501 E-mail: info@riscogroup.co.uk Tech: 00 44 161 655 5600 Fax: 00 44 161 655 5610 E-Mail: technical@riscogroup.co.uk U.S.A - Rokonet Industries U.S.A Inc. Toll Free:1-800-344-2025 Tel: (305) 592-3820 Fax: (305) 592-3825 Email: sales@rokonetusa.com ITALY - RISCO Group S.R.L Tel: +39 (02) 392-5354 Fax: +39 (02) 392-5131 Email: info@riscogroup.it SPAIN - Rokonet Iberia S.L Tel: + 34 (91) 490-2133 Fax: +34 (91) 490-2134 Email: sales@rokonet.es BRAZIL - Rokonet Electronics Ltda. Tel: +55 (11) 3661-8767 Fax: +55 (11) 3661-7783 Email: rokonet@rokonet.com.br ISRAEL - RISCO Group Ltd. Tel: +972 (3) 9637777 Fax: +972 (3) 9616584 Email: info@riscogroup.com All rights reserved. No part of this document may be reproduced in any form without prior written permission from the publisher. © RISCO Group 07/06 5INRWS50 C

Navigation menu