Ricoh PRSP34101 Laser Printer User Manual statement ferrite core
Ricoh Company Ltd Laser Printer statement ferrite core
Ricoh >
Contents
- 1. User manual
- 2. User manual statement ferrite core
- 3. User manual warnings
User manual statement ferrite core
![Attaching the Ferrite Core to the Network CableThe ferrite core must be attached to the network cable.Attach the ferrite core to the network cable before you connect the network cable to this machine.For the procedure for connecting the network cable to this machine, see the User Guide.CATIONNetwork cable with a ferrite core must be used for RF interference suppression.Make a loop about 5 cm (2 inches) from this machine end of the network cable (1). Attach the ferrite core by enclosing the loop inside it.Rinmei-MF_NfU_06.indd 1 2009/03/13 14:05:31Draft 2009/03/17](https://usermanual.wiki/Ricoh/PRSP34101.User-manual-statement-ferrite-core/User-Guide-1182585-Page-1.png)
![Rinmei-MF_NfU_06.indd 2 2009/03/13 14:05:31Draft 2009/03/17](https://usermanual.wiki/Ricoh/PRSP34101.User-manual-statement-ferrite-core/User-Guide-1182585-Page-2.png)
![Copyright © 2009Printed in ChinaM016-8621GB GB EN USARinmei-MF_NfU_06.indd 3 2009/03/13 14:05:31Draft 2009/03/17](https://usermanual.wiki/Ricoh/PRSP34101.User-manual-statement-ferrite-core/User-Guide-1182585-Page-3.png)
![Rinmei-MF_NfU_06.indd 4 2009/03/13 14:05:31Draft 2009/03/17](https://usermanual.wiki/Ricoh/PRSP34101.User-manual-statement-ferrite-core/User-Guide-1182585-Page-4.png)