Reo link Digital Technology ARGUS2 WiFi IP Camera User Manual Argus 2 QSG S

Shenzhen Reo-link Digital Technology Co., Ltd WiFi IP Camera Argus 2 QSG S

Manual

Reolink Argus 2Quick Start GuideFor more troubleshooting, please go to FAQs on our website:https://reolink.com/faqs/For other technical support, please contact us atsupport@reolink.comTechnical SupportQG2_A
Welcome to ReolinkEasy Setup Within Minutes!
What’s in the BoxReolinkArgus 2 Camerax1Basex1Outdoor Security Mount(with a hook & loop strap)x1Surveillance Signx1MountingHole Templatex2Screws (in pack)x2Micro USB Cablex1Reset Needlex1The camera and the rechargeable battery are packed separately in the same package.RechargeableBatteryx1General IntroductionMicro SD Card SlotReset HoleDaylight SensorLensStatus LEDBuilt-in MicBuilt-in PIR Motion SensorSpeakerBase The LED in Blue(WiFi connection succeeded)Blinking: Standby statusOn: Working status The LED in Red(WiFi connection failed)Blinking: Standby statusOn: Working statusSkin(with a small rope)x1* **Please dress the camera with the skin for better weatherproof performance when you install the camera outdoors.*
Install the Rechargeable Battery to the Camera Charge the BatteryThere is a status LED under the micro USB port of the battery, indicating the battery charging status. 1. You can charge the battery when it's installed to the camera. Argus 22. You can charge the battery separately. 3. You can charge the battery with Reolink solar panel. Please note that the solar panel is NOT included in the package. You can buy the solar panel on Reolink official online store. Micro USB Cable RechargeableBatteryReolinkSolar PanelGreen LED: Fully charged (Not included in the package)Orange LED: Charging Pleasepressthebutton(onthetopofthebackcasing),andslide thebackcasingdownwardtocloseit.Thebuttonalsoneeds to be closedfirmlyfor goodweatherproofperformance. For the weatherproof performance, always cover the USB charging port with the rubber plug.
1. Charge the battery when it's installed to the camera. 2.Charge the battery separately.
Important Safeguards on Rechargeable Battery UseImportant Note!!!3. Charge the battery with the Reolink solar panel. Please note that the solar panel is NOT included in the package. You can buy the solar panel on Reolink official online store. 1. Please charge your rechargeable battery with a standard and high-quality DC 5V or 9V battery charger.Reolink Argus 2 is not designed for 24/7 full capacity running or around-the-clock live streaming. It’s designed to record motion events and remotely view live streaming only when you need it.2. If you want to power the camera via the solar panel, please note that the camera is ONLY compatible with Reolink solar panel. You cannot charge this camera with other solar panel brands.3.Please charge the battery in temperatures between 0°C and 45°C.Please learn some useful ways to maximize the battery life in this post:https://reolink.com/faq/extend-battery-life/Please read the battery warnings and safety document provided in the package touse your Reolink Argus 2 rechargeable battery safely.
Install Reolink AppScan the QR code below to download and install the app.There are two ways to get the Reolink App:Available on the Get it onSearch “Reolink” in App Store (for iOS), or Google Play (for Android), download and install the app.Set up the CameraPlease follow the prompt toneto configure the cameraCamera has been started up. Please run Reolink App, add the camera and set it up. Please click the “ ” button in thetop right corner to add the camera.1.Note 1：Your family can click "Access Camera" for live view after the initial setup. Note 2：If you have a Reolink Base, please follow the Quick Start Guide of the Base to add the camera.The Reolink Base is not included in the package.2. Scan the QR code on the back of the camera. 3. Click “Connect to Wi-Fi” to continue.
If you did not hear the voice prompt, please press “I did not hear the voice prompt” for help.Click the button “I have heard the voice prompt” to enter the next page.4. Enter the Wi-Fi password of the selectedWi-Fi network and press “I have enteredthe correct information” to enter the next page.5. I have heard the voice promptI have entered the correct informationAbout 20cm (8 inches)Scansucceeded.Cameraisconnectingtoyourrouter.Pleasewait.A QR code will be generated on the phone. Please place the QR code on your phone towards Reolink Argus 2 camera’s lens at a distance of about 20cm (8 inches) to let the camera scan the QR code. Please make sure that you’ve ripped the protection film of the camera’s lens.6. Distance (20cm)
Connection to the router succeeded. WelcometoReolink!Connection to the router failed! If you hear the above voice prompt, please press “I heard ‘Connection to the router failed! ’ ” for help.If you hear the above voice prompt, please press “I heard ‘Connection to the router succeeded. ’ ” to finish the quick setup.Name your camera and create a password (at least 6 characters), tap “Create Password”, slide the page to read the tips and tap “finish” to start the Live View. Tap to go to the “Devices” menu.8. 7. Note： “Name your camera” field refers to the display name of the camera rather than the login username.“Playback” only displays when you’ve inserted a micro SD card into the camera. Make sure that the SD card is recognized by the camera.9.I heard “Connection to the router succeeded.”I heard “Connection to the router failed! ”
Devices MenuBattery StatusPlease tap the camera and follow the steps to sync the time, and then start live view or go to “Device Settings” for more configurations.10. Add New DeviceMenuEnable/Disable PIR Motion Sensor(In default, the PIR sensor is enabled.)Device SettingsAccess the Live View
Adjust the Detecting Distance of the PIR SensorThe default sensitivity of the PIR sensor is at “Mid” and the detecting distance is 6 meters (20ft). If you want to adjust the sensitivity, please launch your Reolink App, and then click “Device Settings” -> “PIR Settings” and click the “save” button to save the settings.SensitivityDetecting Distance(For movingand living things)Detecting Distance(For moving vehicles)HighMidLowUp to 9 meters (30ft)Up to 6 meters (20ft)Up to 4 meters (13ft) Up to 10 meters (33ft)Up to 12 meters (40ft)Up to 15 meters (50ft)Do not install the camera facing any objects with bright lights, including sunshine, bright lamp lights, etc.Do not place the camera too close to a place where there are frequently moving vehicles. Based on our numerious tests, the recommended distance between the camera and the vehicle is 15 meters (55ft).Stay away from the outlets, including the air conditioner vents, humidifier outlets, the heat transfer vents of projectors, etc.Do not install the camera facing the mirror.Keep the camera at least 1 meter away from any wireless devices, including Wi-Fi routers and phones in order to avoid wireless interference.To reduce false alarms, please note that:Important Notes for Reducing False Alarms!Note: Higher sensitivity offers longer detecting distance, but it would lead to more false alarms. You are advised to set up the sensitivity level to “Low” or “Mid” when you install the camera outdoors.
The ideal viewing distance is 2-10 meters (7-33ft), which enables you to recognize a human.The Ideal Viewing DistanceCover the Monitoring AreaWhen installing the camera, it’s not suggested to make the PIR sensor vertically face the moving object. Please note that if the moving object approaches the PIR sensor vertically, the PIR sensor may not detect the motion events. You are advised to install the camera angularly (the angle between the PIR sensor and the detected object is larger than 10°) for effective motion detection.FYI: Entrance10°θθIt’s not suggested to make the PIR sensor vertically face the moving object.The path of themoving objectThe PIR sensor’s detecting distance: 20ft (in default)The PIR sensor’s detecting angle: 120° (H)Ideal Viewing Distance: 2-10 meters (7-33ft)
How to InstallPress the button to release theplate from the security mount.Step 1 Step 2Step 3 Step 4 Step 5Please dress the camera with the skin for better weatherproof performance when you install the camera outdoors.How to Install the Skin to the CameraPlease dress the Reolink Argus 2 camera with the skin provided in the package.Step 1The skin has an anti-falling safety rope. Please fasten the other end of the rope to the base when mounting the base to the wall.Step 2Stick the camera on the base and twist the camera in any directions you want.Step 3
Press the button to release theplate from the security mount.Step 1 Step 2 Step 3Step 4 Step 5 Step 6Latch the security mount on its plate (Make sure the top edge of the backing plate is inserted into the mount.)Unscrew the Argus from the wallmount.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The distance between user and device should be no less than 20cm.

Navigation menu