Remotesolution RC10A IR & RF Remote User Manual Manual

Remote Solution Co., Ltd. IR & RF Remote Manual

User Manual

Back of remoteCable InHDMITV OutHDMI Camera USB IRAudioEthernetResetPowerLock Press to prevent accidental typing while using front.On/O IndicatorGlowing LED indicates camera is on.Lens with ShutterShutter closes when camera is o.ClipAdjust forplacement.Front of cameraNetwork Messages PowerSD CardWPSUse for wireless setup with WPS capable routers.(Currently not available) SD SlotUse for viewing media (Currently not available)Message IndicatorGlowing LED indicatesnew messages.Network IndicatorGlowing LEDindicates connectionto home network.PowerGlowing LED indicatesadaptor is on.Front of adaptor boxTop of adaptor boxHDMICable InHDMITV OutUSB/IR(Currently not available)PowerEthernet Camera Audio ResetBack of adaptor boxVisit xfinity.com/remotes for programming detailsNavigate Home Close and return to TVSwitch profilesEnd call and ignore incoming callZoom self-view Turn your video camera on/oUse to pair remoteChange screen layoutPlace call on hold,mute mic and pause cameraBattery compartmentRemove tab from battery compartment before use. Mute your microphoneAccept incoming calls and access contactsGo back to previous screen Navigate and select current option Adjust volumeMute callCAPSPress then release CAPSto capitalize a letter—i.e. press and release CAPSthen s for an upper case S. You will need to press/release CAPS for each character.ALTPress then release ALT for characters in blue—i.e. press and release ALT then Q for 1. You will need to press/release ALTfor each character.ShareRewind/Play/Pause/ForwardNot available at this time.SetupIf the remote becomes un-paired, press and hold Setup,then press Callto pair again.Note:You can use this remote to turn on your TV and/or receiver and control volume. Visit xfinity.com/remotes to access the XR3 Remote Control User Guide and follow the instructions from there. Front of remoteWPSGet to Know the PartsNetwork Messages PowerSD CardRemote (1)Pull the tab from the remote’s battery compartment before usingAdaptor box (1)Camera with clip (1) What’s in the BoxYou’ll Also Need:XFINITY® is your interface to a growing number of new products, services and features that will become available to you on your HDTV. Getting Started GuideThe Reset button has two functions, depending on the length of time held:Normal ResetInsert a thin object and hold the Reset button for 2-5 seconds to reboot the adaptor and keep your personal settings. Factory Reset Insert a thin object and hold the Reset button for 15 or more seconds to delete ALL personal settings and restore the adaptor to the default factory settings.Important InformationMicrophones MicrophonesMessagesPowerŢ HDMI-capable Comcast set-top boxŢ HDTVhttp://speedtest.comcast.net)Ţ Internet connection with at least 1.5 Mbps simultaneous upload and download speeds (check your speeds at Ţ Comcast IDŢ Skype™ account Power adaptor cable (1) HDMI cable (2)Power adaptor (1) USB extension cable (1)Note: This packaging has been specially designed using sustainable materials. Be kind to the environment and re-use this box.Need help? Call 877-704-7713 for assistance.
Need help? Call 877-704-7713 for assistance. Please keep for future reference, but if you decide to toss, please recycle.Need help? Call 877-704-7713 for assistance.Please keep for future reference, but if you decide to toss, please recycle.16983970 Printed in China Getting Started Guide v.2.0Comcast AccountYou will link your Comcast ID to a Skype account during the TV activation process. If you don’t have a Skype account or need to create a new one, you can do so during activation.Skype AccountYou must use your Comcast ID to activate. Please visit http://customer.comcast.com to create more Comcast IDs.@comcast.netPassword:Username:Skype Name:Password:Network Password (Key):If you choose to use your wireless home network, you’ll need the following information during the TV activation. If you have a compatible router with WiFi Protected Setup (WPS), this will be detected and you’ll automatically connect to your wireless network. (WPS is currently not available)(for hidden wireless networks only)Home NetworkPlease visit www.comcast.com/skype for online support.Please contact our customer care sta at 877-704-7713 for assistance with set-up and activation.Support InformationNetwork Name (SSID):Security Encryption Method:Save time during activation by completing the information below.Important Information Plug an HDMI cable into the HDMI port on the back of your set-top box and the other end to the HDMI Cable In port on your adaptor box. Note: If you have an audio receiver, use one HDMI cable to connect your set-top box to your receiver then use another HDMI cable to connect the receiver to your adapter box. Plug a second HDMI cable to the HDMI TV Out port on your adaptor and the other end to one of the available HDMI ports on your TV. Plug the camera (USB) cable into the Camera port on the adaptor box. If the camera cable isn’t long enough, use the provided USB extension cable to extend the camera cable’s reach. Decide if you want to connect to your home network using a wired Ethernet cable or wireless connection. Ethernet connection: Plug a CAT-6 Ethernet cable (not provided) to the Ethernet port on the adaptor box and the other end to an available port on your modem or router. Wireless connection: Skip this step and follow the instructions during TV activation. If you’re using an audio receiver with an SPDIF (Optical Digital Audio) cable, disconnect this cable from your set-top box and plug it into the Audio port on the adaptor box. Since SPDIF only transmits audio, you’ll also have to connect via HDMI in order to see any video. We strongly recommend using both HDMI and SPDIF cables (as depicted in the illustrati on) to connect your adaptor box. Connect the power adaptor to the power adaptor cable. Plug the power adaptor into the Power port on the adaptor box and the power adaptor cable to an electrical outlet. There is no actual power button on your adaptor box so this power cable is the only way to turn the system on and o. Once everything is connected, power up the system then use your TV’s remote to select the same HDMI input to which you’ve connected the adaptor box. Note: As long as your adaptor box is plugged in, it will act as a pass-through device between your TV and your set-top box or receiver (if using).Connect and Power Up2Before you begin, please turn o your TV, set-top box and audio receiver (if using) then disconnect the HDMI cables that are currently connecting your set-top box to your TV.Basic Setup Setup with ReceiverHDMIUSB USBHDMIHDMI HDMI HDMIHDMI* If you don’t have an SPDIF/Optical cable, you can purchase one to connect your receiver with the adaptor box or simply use the existing HDMI cable to use your TV’s audio system. * SPDIF/Optical Digital AudioHDMIORADAPTOR BOXADAPTOR BOXRECEIVERSET-TOP BOXSET-TOP BOXDVD PLAYERCAMERAActivate3 Once you’ve powered up, you’ll see an XFINITY screen. After a few minutes, you’ll be greeted with a Welcome screen. Please be patient during this wait as it may take up to 20 minutes. If the Welcome screen does not appear after 20 minutes, try unplugging your device then plugging it in again or call customer care at 877-704-7713 for assistance. Remove the tab from your remote’s battery compartment before using. If the keyboard is unresponsive, see if the LOCK button is engaged (it will glow red when you press a key). Press the LOCK button to disengage and unlock the keyboard. Use your remote to complete the activation by following the directions on your TV screen. You’ll be taken through a short series of screens prompting you to check your equipment. During this time, you may be asked to run a firmware upgrade to ensure everything is working properly. ŢŢŢŢŢŢMake Audio & Video Calls4If you already have an existing Skype account with contacts:ŢŢIf you’ve just set up your Skype account and don’t have any contacts yet:ŢŢŢGo to Home > Contacts and select from the list.Click VIDEO CALL,AUDIO CALL or MESSAGE to connect.Go to Home > Contacts and select Add Contact.Use the keyboard to enter a Skype Name, Skype Display Name or email address. Once your invitation to connect is accepted, the person will appear in your Contacts. Select the person.Click VIDEO CALL,AUDIO CALL or MESSAGE to connect.GAMECONSOLEORFlat SurfaceTV TopBack of TV1Set Up Camera1 Place the front of the camera on top of your TV, with the bottom lip resting just below the top of the screen. Push the clip down until it touches the back of the TV and the camera is secured. Pivot the angle of the camera and adjust to capture your preferred viewing area.Place the camera on your level surface with the lens facing the viewing area. Hold the rubber bottom in place while pivoting the angle of the camera to capture your preferred viewing area.Note: The recommended viewing distance is 5' - 12'. Camera should not be used near strong magnetic fields.Important Note for Wall-Mounted TVsMake sure the combined weight of the camera (8.81 oz.) and TV does not exceed the maximum rating for your wall mount. Check the wall mount manufacturer’s manual for the maximum rating. The camera clip is not compatible with all TV wall mounts. For wall-mounted TVs that have been installed flush with the wall, camera placement on your TV is not recommended due to space constraints which may result in damage to your TV or the camera.Important Note for Fireplace-Mounted TVsThe camera is not intended for use in high-temperature locations, such as above fireplaces.TV Top: ORFlat Surface: ŢŢŢŢPivot Camera toadjust viewCamera USB IRAudioEthernetResetPowerDigital Audio ReceiverOutletCameraTVBack of Modem if using EthernetSet-top BoxORNotavailable at this timeNotavailable at this timeMessagesPowerBack of adaptor boxHDMI HDMICable InHDMITV OutHDMI

Navigation menu