Realtek Semiconductor RTL8188CEB8 802.11b/g/n RTL8188CE Combo miniCard User Manual

Realtek Semiconductor Corp. 802.11b/g/n RTL8188CE Combo miniCard

UserManual.wiki >

Realtek Semiconductor >

RTL8188CEB8 User Manual >

Contents

user manual

HP NotebookReference GuideHP Mini 110Compaq Mini CQ10HP Mini 1103

© Copyright 2010 Hewlett-PackardDevelopment Company, L.P.ATI is a trademark of Advanced MicroDevices, Inc. Bluetooth is a trademarkowned by its proprietor and used by Hewlett-Packard Company under license. Microsoftand Windows are U.S. registered trademarksof Microsoft Corporation. Java is a U.S.trademark of Sun Microsystems, Inc.The information contained herein is subjectto change without notice. The onlywarranties for HP products and services areset forth in the express warranty statementsaccompanying such products and services.Nothing herein should be construed asconstituting an additional warranty. HP shallnot be liable for technical or editorial errorsor omissions contained herein.Second Edition: May 2010First Edition: April 2010Document Part Number: 607194-002Product noticeThis reference guide describes features thatare common to most models. Some featuresmay not be available on your computer.

Safety warning noticeWARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do notplace the computer directly on your lap or obstruct the computer air vents. Use the computer only on ahard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a softsurface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to comeinto contact with the skin or a soft surface, such as pillows or rugs or clothing, during operation. Thecomputer and the AC adapter comply with the user-accessible surface temperature limits defined bythe International Standard for Safety of Information Technology Equipment (IEC 60950).iii

iv Safety warning notice

Table of contents1 Introduction ..................................................................................................................................................... 1Finding more information about your new computer ............................................................................ 12 Networking (select models only) ................................................................................................................... 2Creating a wireless connection ............................................................................................................ 2Identifying wireless and network status icons ...................................................................... 2Turning wireless devices on or off ....................................................................................... 3Using the wireless button .................................................................................... 3Using HP Wireless Assistant (select models only) to turn wireless devices onor off .................................................................................................................... 4Using HP Connection Manager (select models only) .......................................................... 4Using operating system controls .......................................................................................... 5Using a WLAN ...................................................................................................................................... 5Connecting to an existing WLAN ......................................................................................... 5Setting up a new WLAN ....................................................................................................... 6Protecting your WLAN ......................................................................................................... 6Roaming to another network ................................................................................................ 7Using HP Mobile Broadband (select models only) ............................................................................... 7Inserting a SIM ..................................................................................................................... 7Removing a SIM .................................................................................................................. 8Using Bluetooth wireless devices ......................................................................................................... 8Bluetooth and Internet Connection Sharing (ICS) ............................................................... 8Using GPS (select models only) ........................................................................................................... 9Connecting to a wired network ............................................................................................................. 9Using a modem (select models only) ................................................................................... 9Connecting a modem cable ................................................................................ 9Connecting a country- or region-specific modem cable adapter ....................... 10Selecting a location setting ............................................................................... 10Viewing the current location selection .............................................. 10Adding new locations when traveling ............................................... 10Connecting to a local area network (LAN) (select models only) ........................................ 123 Multimedia ..................................................................................................................................................... 14Using the media activity controls ........................................................................................................ 14Audio .................................................................................................................................................. 14Adjusting the volume ......................................................................................................... 14Checking audio functions on the computer ........................................................................ 15Webcam (select models only) ............................................................................................................ 16v

Using SkyRoom (select models only) ................................................................................ 16Video .................................................................................................................................................. 16VGA ................................................................................................................................... 16DisplayPort ........................................................................................................................ 17HDMI .................................................................................................................................. 17Configuring audio for HDMI ............................................................................... 18Using HP MediaSmart (select models only) ....................................................................................... 194 Power management ...................................................................................................................................... 20Shutting down the computer ............................................................................................................... 20Setting power options ......................................................................................................................... 20Using power-saving states ................................................................................................. 20Initiating and exiting Sleep ................................................................................ 21Initiating and exiting Hibernation ....................................................................... 21Using the power meter ....................................................................................................... 22Using power plans ............................................................................................................. 22Viewing the current power plan ......................................................................... 22Selecting a different power plan ........................................................................ 22Customizing power plans .................................................................................. 22Setting password protection on wakeup ............................................................................ 23Using battery power ........................................................................................................................... 23Finding battery information in Help and Support in Windows 7 ......................................... 24Using Battery Check in Windows 7 .................................................................................... 24Displaying the remaining battery charge ........................................................................... 24Maximizing battery discharge time .................................................................................... 24Managing low battery levels .............................................................................................. 25Identifying low battery levels ............................................................................. 25Resolving a low battery level ............................................................................. 25Resolving a low battery level when external power is available ....... 25Resolving a low battery level when a charged battery isavailable ........................................................................................... 25Resolving a low battery level when no power source isavailable ........................................................................................... 25Resolving a low battery level when the computer cannot exitHibernation ....................................................................................... 26Conserving battery power .................................................................................................. 26Storing a battery ................................................................................................................ 26Disposing of a used battery ............................................................................................... 26Replacing the battery ......................................................................................................... 26Using external AC power .................................................................................................................... 27Testing an AC adapter ....................................................................................................... 28Switching between graphics modes (select models only) .................................................................. 28vi

5 External cards and devices .......................................................................................................................... 29Using Digital Media Slot cards (select models only) .......................................................................... 29Inserting a digital card ........................................................................................................ 29Removing a digital card ..................................................................................................... 29Using PC Cards (select models only) ................................................................................................. 30Configuring a PC Card ....................................................................................................... 30Inserting a PC Card ........................................................................................................... 30Removing a PC Card ......................................................................................................... 32Using ExpressCards (select models only) .......................................................................................... 32Configuring an ExpressCard .............................................................................................. 32Inserting an ExpressCard .................................................................................................. 33Removing an ExpressCard ................................................................................................ 34Using smart cards (select models only) ............................................................................................. 34Inserting a smart card ........................................................................................................ 35Removing a smart card ...................................................................................................... 35Using a USB device ........................................................................................................................... 35Connecting a USB device .................................................................................................. 35Removing a USB device .................................................................................................... 36Using 1394 devices (select models only) ........................................................................................... 36Connecting a 1394 device ................................................................................................. 37Removing a 1394 device ................................................................................................... 37Using an eSATA device (select models only) .................................................................................... 37Connecting an eSATA device ............................................................................................ 37Removing an eSATA device .............................................................................................. 38Using optional external devices .......................................................................................................... 39Using optional external drives ............................................................................................ 39Using the expansion port (select models only) .................................................................. 39Using the docking connector (select models only) ............................................................ 406 Drives ............................................................................................................................................................. 41Handling drives ................................................................................................................................... 41Using hard drives ............................................................................................................................... 41Improving hard drive performance ..................................................................................... 41Using Disk Defragmenter .................................................................................. 41Using Disk Cleanup ........................................................................................... 42Using HP ProtectSmart Hard Drive Protection in Windows 7 (select models only) ........... 42Identifying HP ProtectSmart Hard Drive Protection status ................................ 43Managing power with a parked hard drive ........................................................ 43Using HP ProtectSmart Hard Drive Protection software ................................... 43Using optical drives (select models only) ........................................................................................... 44Identifying the installed optical drive .................................................................................. 44Inserting an optical disc ..................................................................................................... 45Tray load ........................................................................................................... 45vii

Slot load ............................................................................................................ 45Removing an optical disc ................................................................................................... 46Tray load ........................................................................................................... 46When the disc tray opens normally .................................................. 46When the disc tray fails to open ....................................................... 46Slot load ............................................................................................................ 47Sharing optical drives ........................................................................................................ 48Using RAID (select models only) ........................................................................................................ 487 Security .......................................................................................................................................................... 49Protecting the computer ..................................................................................................................... 49Using passwords ................................................................................................................................ 49Setting passwords in Windows .......................................................................................... 50Setting passwords in Setup Utility ..................................................................................... 50Managing an administrator password ............................................................... 51Entering an administrator password .................................................................. 51Managing a power-on password ....................................................................... 51Entering a power-on password ......................................................................... 51Using antivirus software ..................................................................................................................... 52Using firewall software ....................................................................................................................... 52Installing critical security updates ....................................................................................................... 52Installing an optional security cable .................................................................................................... 53Using the fingerprint reader (select models only) ............................................................................... 53Locating the fingerprint reader ........................................................................................... 538 Setup Utility (BIOS) ....................................................................................................................................... 55Starting Setup Utility ........................................................................................................................... 55Using Setup Utility .............................................................................................................................. 55Changing the language of Setup Utility ............................................................................. 55Navigating and selecting in Setup Utility ............................................................................ 55Displaying system information ........................................................................................... 56Restoring factory default settings in Setup Utility .............................................................. 56Exiting Setup Utility ............................................................................................................ 56Updating the BIOS ............................................................................................................................. 57Determining the BIOS version ........................................................................................... 57Downloading a BIOS update ............................................................................................. 57Appendix A Traveling with the computer ...................................................................................................... 59Appendix B Troubleshooting resources ....................................................................................................... 60Appendix C Electrostatic Discharge .............................................................................................................. 61viii

Index ................................................................................................................................................................... 62ix

1 IntroductionThis guide contains general information about HP and Compaq notebook computers, includingconnecting to a wireless network, multimedia, power management, security, and so on.NOTE: Some of the features described in this guide may not be available on your computer.Finding more information about your new computerThe following user guides and reference material are provided with your computer, either in print, onthe computer hard drive, or on an optical disc or SD Card:●Quick Setup poster—Guides you through setting up your computer and turning it on. The posteris located in the computer box.NOTE: Refer to the poster for the location of your user guides and reference material.●Getting Started—Contains information about your computer, including product-specific features,backup and recovery, maintenance, and specifications.●Help and Support—Contains information about the operating system, drivers, troubleshootingtools, and technical support. To access Help and Support, select Start > Help and Support. Forcountry- or region-specific support, go to http://www.hp.com/support, select your country or region,and follow the on-screen instructions.●Safety & Comfort Guide—Describes proper workstation setup and proper posture, health, and workhabits for computer users. It also provides important electrical and mechanical safety information.To access this guide, select Start > Help and Support > User Guides. This guide is also availableon the Web at http://www.hp.com/ergo.●Regulatory, Safety, and Environmental Notices—Contains safety and regulatory information, andbattery disposal information. To access the notices, select Start > Help and Support > UserGuides.Finding more information about your new computer 1

2 Networking (select models only)Your computer supports 2 types of Internet access:●Wireless—Refer to Creating a wireless connection on page 2.●Wired—Refer to Connecting to a wired network on page 9.NOTE: You must set up Internet service before you can connect to the Internet.Creating a wireless connectionYour computer may be equipped with one or more of the following wireless devices:●Wireless local area network (WLAN) device●HP Mobile Broadband Module (wireless wide area network (WWAN))●Bluetooth® deviceFor more information on wireless technology, refer to the information and Web site links provided inHelp and Support.Identifying wireless and network status iconsWindows 7Icon Name DescriptionWireless (connected) Indicates that one or more wireless devices are on.Wireless (disconnected) Indicates that all wireless devices are off.HP Connection Manager Opens HP Connection Manager, which enables you to create a connectionwith an HP Mobile Broadband Module (select models only).Wired network (connected) Indicates that one or more network devices are connected to the network.Network (disabled/disconnected)Indicates that all network devices are disabled in Windows Control Panel.Network (connected) Indicates that one or more network devices are connected to a network.2 Chapter 2 Networking (select models only)

Network (disconnected) Indicates that network devices are not connected to a network.Network (disabled/disconnected)Indicates that no wireless connections are available.Windows XPIcon Name DescriptionHP Connection Manager Opens HP Connection Manager, which enables you to createa connection with an HP Mobile Broadband Module (selectmodels only).Wireless (connected) Indicates that one or more wireless devices are on.Wireless (disconnected) Indicates that all wireless devices are off.Wireless network connection (connected) Indicates that one or more WLAN devices are connected toa network.Wireless network connection (disconnected) Indicates that one or more WLAN devices are not connectedto a network.Network status (connected) Connected to the wired network.Network status (disconnected) Not connected to the wired network.Turning wireless devices on or offUsing the wireless buttonNOTE: A computer may have a wireless button, a wireless switch, or a wireless action key on thekeyboard. The term wireless button is used throughout this guide to refer to all types of wireless controls.Refer to the Getting Started guide for information on identifying the location of the wireless button onyour computer.You can use the wireless button to simultaneously turn on or turn off the wireless network controller andBluetooth device. These devices can be controlled through Wireless Assistant (select models only).Creating a wireless connection 3

Using HP Wireless Assistant (select models only) to turn wireless devices on or offA wireless device can be turned on or off using Wireless Assistant. If a wireless device is disabled inSetup Utility, it must be reenabled in Setup Utility before it can be turned on or off using WirelessAssistant.NOTE: Enabling and turning on a wireless device does not automatically connect the computer to anetwork or a Bluetooth-enabled device.To view the state of the wireless devices, click the Show hidden icons icon, the arrow at the left of thenotification area, and position the mouse pointer over the wireless icon.▲To open Wireless Assistant, double-click the wireless icon in the notification area.If the wireless icon is not displayed in the notification area, complete the following steps:Windows 71. Select Start > Control Panel > Hardware and Sound > Windows Mobility Center.2. Click the wireless icon in the Wireless Assistant tile, which is located in the bottom row of Windows®Mobility Center.3. Click Properties.4. Select the check box next to HP Wireless Assistant icon in notification area.5. Click Apply.6. Click Close.For more information, refer to the Wireless Assistant software Help:1. Open Wireless Assistant by clicking the wireless icon in Windows Mobility Center.2. Click the Help button.Windows XP1. Select Start > Control Panel > Network and Internet Connections > HP Wireless Assistant.2. Click Properties.3. Select the check box next to Wireless Assistant icon in notification area.4. Click Apply.Using HP Connection Manager (select models only)You can use HP Connection Manager to connect to WWANs using the HP Mobile Broadband Modulein your computer (select models only).▲To start Connection Manager, click the HP Connection Manager icon in the notification area, atthe far right of the taskbar.– or –Select Start > All Programs > HP Connection Manager > HP Connection Manager.For more details about using Connection Manager, refer to the Connection Manager software Help.4 Chapter 2 Networking (select models only)

Using operating system controlsThe Network and Sharing Center allows you to set up a connection or network, connect to a network,manage wireless networks, and diagnose and repair network problems.Windows 7▲Select Start > Control Panel > Network and Internet > Network and Sharing Center.Windows XP▲Select Start > Control Panel > Network and Internet Connections > Network Connections.For more information, select Start > Help and Support.Using a WLANA wireless connection connects the computer to Wi-Fi networks, or WLANs. A WLAN is composed ofother computers and accessories that are linked by a wireless router or a wireless access point.Connecting to an existing WLANWindows 71. Be sure that the WLAN device is on. (Refer to Turning wireless devices on or off on page 3).2. Click the network icon in the notification area, at the far right of the taskbar.3. Select your WLAN from the list.4. Click Connect.If the network is a security-enabled WLAN, you are prompted to enter a network security code.Type the code, and then click OK to complete the connection.NOTE: If no WLANs are listed, you are out of range of a wireless router or access point.NOTE: If you do not see the network you want to connect to, click Open Network and SharingCenter, and then click Set up a new connection or network. A list of options is displayed. Youcan choose to manually search for and connect to a network or to create a new network connection.Windows XP1. Be sure that the WLAN device is on. (Refer to Turning wireless devices on or off on page 3.)2. Select Start > Connect to.3. Select your WLAN from the list.●If the network is unsecured, a warning is displayed. Click Connect Anyway to accept thewarning and complete the connection.●If the network is a security-enabled WLAN, you are prompted to enter a network security code.Type the code, and then click Connect to complete the connection.NOTE: If no WLANs are listed, you are out of range of a wireless router or access point.NOTE: If you do not see the network you want to connect to, click Set up a connection ornetwork. A list of options is displayed. You can choose to manually search for and connectto a network or to create a new network connection.After the connection is made, you can place the mouse pointer over the network icon in the notificationarea, at the far right of the taskbar, to verify the name and status of the connection.Using a WLAN 5

NOTE: The functional range (how far your wireless signals travel) depends on WLAN implementation,router manufacturer, and interference from other electronic devices or structural barriers such as wallsand floors.Setting up a new WLANRequired equipment:●A broadband modem (either DSL or cable) (1) and high-speed Internet service purchased from anInternet service provider (ISP)●A wireless router (purchased separately) (2)●The wireless computer (3)NOTE: Some cable modems include a built-in router. Check with your ISP to see if you need a separaterouter.The illustration below shows an example of a wireless network installation that is connected to theInternet.NOTE: When setting up a wireless connection, be sure that your computer and wireless router aresynchronized. To synchronize your computer and wireless router, turn your computer and wirelessrouter off and then back on.As your network grows, additional wireless and wired computers can be connected to the network toaccess the Internet.For help in setting up your WLAN, refer to the information provided by your router manufacturer or yourISP.Protecting your WLANWhen you set up a WLAN or access an existing WLAN, always enable security features to protect yournetwork from unauthorized access. WLANs in public areas (hotspots) like coffee shops and airportsmay not provide any security. If you are concerned about the security of your computer in a hotspot,limit your network activities to e-mail that is not confidential and basic Internet surfing.Wireless radio signals travel outside the network, so other WLAN devices can pick up unprotectedsignals. You can take the following precautions to protect your WLAN:●Firewall—Checks both data and requests for data that are sent to your network, and discards anysuspicious items. Firewalls are available in both software and hardware. Some networks use acombination of both types.●Wireless encryption—Wi-Fi Protected Access (WPA) uses security settings to encrypt anddecrypt data transmitted over the network. WPA uses Temporal Key Integrity Protocol (TKIP) todynamically generate a new key for every packet. It also generates different sets of keys for eachcomputer on the network.6 Chapter 2 Networking (select models only)

Roaming to another networkWhen you move your computer within range of another WLAN, Windows attempts to connect to thatnetwork. If the attempt is successful, your computer is automatically connected to the new network. IfWindows does not recognize the new network, follow the same procedure you used initially to connectto your WLAN.Using HP Mobile Broadband (select models only)HP Mobile Broadband enables your computer to use wireless wide area networks (WWANs) to accessthe Internet from more places and over larger areas than it can by using WLANs. Using HP MobileBroadband requires a network service provider, which in most cases is a mobile phone network provider.When used with mobile network provider service, HP Mobile Broadband gives you the freedom to stayconnected to the Internet, send e-mail, or connect to your corporate network whether you are on theroad or outside the range of Wi-Fi hotspots.NOTE: You may need the HP Mobile Broadband Module serial number to activate mobile broadbandservice. Refer to the Getting Started guide for the location of the serial number.Some mobile network service providers require the use of a subscriber identity module (SIM). A SIMcontains basic information about you, such as a personal identification number (PIN), as well as networkinformation. Some computers include a preinstalled SIM. If the SIM is not preinstalled, it may be includedwith the HP Mobile Broadband information provided with your computer, or it may be provided separatelyby the mobile network service provider.For information on inserting and removing the SIM, refer to Inserting a SIM on page 7 and Removinga SIM on page 8.For information on HP Mobile Broadband and how to activate service with a preferred mobile networkservice provider, refer to the HP Mobile Broadband information included with your computer. Foradditional information, see the HP Web site at http://www.hp.com/go/mobilebroadband (U.S. only).Inserting a SIMNOTE: To identify the SIM slot location, refer to the Getting Started guide.1. Shut down the computer. If you are not sure whether the computer is off or in Hibernation, turn thecomputer on by pressing the power button. Then shut down the computer through the operatingsystem.2. Close the display.3. Disconnect all external devices connected to the computer.4. Unplug the power cord from the AC outlet.5. Remove the battery.6. Insert the SIM into the SIM slot, and gently press the SIM into the slot until it is firmly seated.CAUTION: When inserting a SIM, position the card to match the icon next to the SIM slot on thecomputer. If a SIM is inserted incorrectly, it could damage the SIM and the SIM connector.To reduce the risk of damage to the connector, use minimal force when inserting a SIM.7. Replace the battery.NOTE: HP Mobile Broadband is disabled if the battery is not replaced.Using HP Mobile Broadband (select models only) 7

8. Reconnect external power and external devices.9. Turn on the computer.Removing a SIMNOTE: To identify the SIM slot location, refer to the Getting Started guide.1. Shut down the computer. If you are not sure whether the computer is off or in Hibernation, turn thecomputer on by pressing the power button. Then shut down the computer through the operatingsystem.2. Close the display.3. Disconnect all external devices connected to the computer.4. Unplug the power cord from the AC outlet.5. Remove the battery.6. Press in on the SIM, and then remove it from the slot.7. Replace the battery.8. Reconnect external power and external devices.9. Turn on the computer.Using Bluetooth wireless devicesA Bluetooth device provides short-range wireless communications that replace the physical cableconnections that traditionally link electronic devices such as the following:●Computers●Phones●Imaging devices (cameras and printers)●Audio devicesBluetooth devices provide peer-to-peer capability that allows you to set up a personal area network(PAN) of Bluetooth devices. For information on configuring and using Bluetooth devices, refer to theBluetooth software Help.Bluetooth and Internet Connection Sharing (ICS)HP does not recommend setting up one computer with Bluetooth as a host and using it as a gatewaythrough which other computers may connect to the Internet. When two or more computers are connectedusing Bluetooth, and Internet Connection Sharing (ICS) is enabled on one of the computers, the othercomputers may not be able to connect to the Internet using the Bluetooth network.The strength of Bluetooth is in synchronizing information transfers between your computer and wirelessdevices including cellular phones, printers, cameras, and PDAs. The inability to consistently connecttwo or more computers to share the Internet through Bluetooth is a limitation of Bluetooth and theWindows operating system.8 Chapter 2 Networking (select models only)

Using GPS (select models only)Your computer may be equipped with a Global Positioning System (GPS). GPS satellites deliverlocation, speed, and direction information to GPS-equipped systems.For more information, refer to the HP Connection Manager or HP Wireless Assistant software Help.Connecting to a wired networkUsing a modem (select models only)A modem must be connected to an analog telephone line using a 6-pin, RJ-11 modem cable (purchasedseparately). In some countries or regions, a specific modem cable adapter is also required. Jacks fordigital PBX systems may resemble analog telephone jacks, but they are not compatible with the modem.WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a modemor telephone cable into the RJ-45 (network) jack.If the modem cable contains noise suppression circuitry (1), which prevents interference from TV andradio reception, orient the circuitry end of the cable (2) toward the computer.Connecting a modem cable1. Plug the modem cable into the modem jack (1) on the computer.2. Plug the modem cable into the RJ-11 telephone wall jack (2).Using GPS (select models only) 9

Connecting a country- or region-specific modem cable adapterTelephone jacks vary by country or region. To use the modem and the modem cable outside the countryor region in which you purchased the computer, you must obtain a country- or region-specific modemcable adapter.To connect the modem to an analog telephone line that does not have an RJ-11 telephone jack, followthese steps:1. Plug the modem cable into the modem jack (1) on the computer.2. Plug the modem cable into the modem cable adapter (2).3. Plug the modem cable adapter (3) into the telephone wall jack.Selecting a location settingViewing the current location selectionWindows 71. Select Start > Control Panel.2. Click Clock, Language, and Region.3. Click Region and Language.4. Click the Location tab to display your location.Windows XP1. Select Start > Control Panel.2. Click Date, Time, Language, and Regional Options.3. Click Regional and Language Options.Your location is displayed under Location.Adding new locations when travelingOn a new computer, the only location setting available to the modem is a location setting for the countryor region in which you purchased the computer. As you travel to different countries or regions, set the10 Chapter 2 Networking (select models only)

internal modem to a location setting that meets the operating standards of the country or region in whichyou are using the modem.As you add new location settings, they are saved by the computer so that you can switch among settingsat any time. You can add multiple location settings for any country or region.CAUTION: To reduce the risk of losing your home country or region settings, do not delete your currentmodem country or region settings. To enable modem use in other countries or regions while preservingyour home country or region configuration, add a new configuration for each location in which you willuse the modem.CAUTION: To reduce the risk of configuring the modem in a way that violates the telecommunicationsregulations and laws of the country or region you are visiting, select the country or region in which thecomputer is located. The modem may not function properly if the correct country or region selection isnot made.Windows 71. Select Start > Devices and Printers.2. Right-click the device that represents your computer, and click Modem settings.NOTE: You must set up an initial (current) location area code before you can view the DialingRules tab. If you do not have a location already set up, you are prompted to enter the location whenyou click Modem settings.3. Click the Dialing Rules tab.4. Click New. The New Location window opens.5. In the Location name box, type a name (such as home or work) for the new location setting.6. Select a country or region from the Country/region list. (If you select a country or region that isnot supported by the modem, the country/region selection for USA or UK is displayed.)7. Enter the area code, a carrier code (if necessary), and the number for an outside line (if necessary).8. Next to Dial using, click Tone or Pulse.9. Click OK to save your new location setting. The Phone and Modem Options window opens.10. Do one of the following:●To set your new location setting as the current location, click OK.●To select another location setting as the current location setting, select your preference fromthe settings in the Location list, and then click OK.NOTE: You can use the preceding procedure to add location settings for places within yourown country or region as well as in other countries or regions. For example, you could add asetting named “Work” that includes dialing rules for accessing an outside line.Windows XP1. Select Start > Control Panel.2. Click Printers and Other Hardware.3. Click Phone and Modem Options.4. Click the Dialing Rules tab.5. Click New. The New Location window opens.6. In the Location name box, type a name (such as home or work) for the new location setting.Connecting to a wired network 11

7. Select a country or region from the Country/region list. (If you select a country or region that isnot supported by the modem, the country/region selection for USA or UK is displayed.)8. Enter the area code, a carrier code (if necessary), and the number for an outside line (if necessary).9. Next to Dial using, click Tone or Pulse.10. Click OK to save your new location setting. The Phone and Modem Options window opens.11. Do one of the following:●To set your new location setting as the current location, click OK.●To select another location setting as the current location setting, select your preference fromthe settings in the Location list, and then click OK.NOTE: You can use the preceding procedure to add location settings for places within your owncountry or region as well as in other countries or regions. For example, you could add a settingnamed “Work” that includes dialing rules for accessing an outside line.Connecting to a local area network (LAN) (select models only)Connecting to a local area network (LAN) requires an 8-pin, RJ-45 network cable (purchasedseparately). If the network cable contains noise suppression circuitry (1), which prevents interferencefrom TV and radio reception, orient the circuitry end of the cable (2) toward the computer.To connect the network cable:1. Plug the network cable into the network jack (1) on the computer.2. Plug the other end of the network cable into a network wall jack (2).12 Chapter 2 Networking (select models only)

WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a modemcable or telephone cable into an RJ-45 (network) jack.Connecting to a wired network 13

3MultimediaYour computer may include the following:●One or two integrated speakers●One or two integrated microphones●Integrated webcam●Preinstalled multimedia software●Multimedia buttons or keysUsing the media activity controlsDepending on your computer model, you may have the following media activity controls that allow youto play, pause, fast forward, or rewind a media file:●Media buttons●Media hotkeys (specific keys pressed in combination with the fn key)●Media action keysRefer to the Getting Started guide for information about your computer's media activity controls.AudioYour computer provides a variety of audio-related opportunities:●Play music.●Record sound.●Download music from the Internet.●Create multimedia presentations.●Transmit sound and images with instant messaging programs.●Stream radio programs.●Create (burn) audio CDs using the installed optical drive (select models only) or on an optionalexternal optical drive (purchased separately).Adjusting the volumeDepending on your computer model, you can adjust the volume using the following:●Volume buttons●Volume hotkeys●Volume keys14 Chapter 3 Multimedia

WARNING! To reduce the risk of personal injury, adjust the volume before putting on headphones,earbuds, or a headset. For additional safety information, refer to the Regulatory, Safety, andEnvironmental Notices.NOTE: Volume can also be controlled through the operating system and some programs.NOTE: Refer to the Getting Started guide for information on what type of volume controls yourcomputer has.Checking audio functions on the computerWindows 7To check the audio functions on your computer, follow these steps:1. Select Start > Control Panel > Hardware and Sound > Sound.2. When the Sound window opens, click the Sounds tab. Under Program Events, select any soundevent, such as a beep or alarm, and click the Test button.You should hear sound through the speakers or through connected headphones.To check the recording functions on your computer, follow these steps:1. Select Start > All Programs > Accessories > Sound Recorder.2. Click Start Recording and speak into the microphone. Save the file to your desktop.3. Open a multimedia program and play back the sound.NOTE: For best results when recording, speak directly into the microphone and record sound in asetting free of background noise.To confirm or change the audio settings on your computer, select Start > Control Panel > Hardwareand Sound > Sound.Windows XPTo check the audio functions on your computer, follow these steps:1. Select Start > Control Panel > Sounds, Speech, and Audio Devices > Sounds and AudioDevices.2. When the Sound and Audio Device Properties window opens, click the Sounds tab. UnderProgram events, select any sound event, such as a beep or alarm, and click the arrow button tocheck the sound.You should hear sound through the speakers or through connected headphones.To check the recording functions on your computer, follow these steps:1. Select Start > All Programs > Accessories > Entertainment > Sound Recorder.2. Click the recording button and speak into the microphone. Save the file to your desktop.3. Open a multimedia program and play back the sound.NOTE: For best results when recording, speak directly into the microphone and record sound in asetting free of background noise.To confirm or change the audio settings on your computer, right-click the Volume icon on the taskbar,or select Start > Control Panel > Sounds, Speech, and Audio Devices > Sounds and AudioDevices.Audio 15

Webcam (select models only)Some computers include an integrated webcam, located at the top of the display. With the preinstalledsoftware, you can use the webcam to take a photo or record a video. You can preview and save thephoto or video recording.The webcam software enables you to experiment with the following features:●Capturing and sharing video●Streaming video with instant message software●Taking still photosFor information on how to access the webcam, refer to the Getting Started guide. For information onusing the webcam, select Start > Help and Support.Using SkyRoom (select models only)HP SkyRoom is a video tool that allows video conferencing and desktop sharing so that participantsacross the world can collaborate in real time.You can utilize your existing Microsoft Office Communicator or Jabber contact lists or you can createyour own list and add contacts manually. For more information, refer to the SkyRoom software Help.VideoYour computer may have one or more of the following external video ports:●VGA●DisplayPort●HDMIVGAThe external monitor port, or VGA port, is an analog display interface that connects an external VGAdisplay device such as an external VGA monitor or a VGA projector to the computer.16 Chapter 3 Multimedia

▲To connect a VGA display device, connect the device cable to the external monitor port.NOTE: For product-specific instructions on switching the screen image, refer to your GettingStarted guide.DisplayPortThe DisplayPort connects a digital display device such as a high-performance monitor or projector. TheDisplayPort delivers higher performance than the VGA external monitor port and improves digitalconnectivity.▲To connect a digital display device, connect the device cable to the DisplayPort.NOTE: For product-specific instructions on switching the screen image, refer to your GettingStarted guide.HDMIThe HDMI (High Definition Multimedia Interface) port connects the computer to an optional video oraudio device, such as a high-definition television, or to any compatible digital or audio component.NOTE: To transmit video signals through the HDMI port, you need an HDMI cable (purchasedseparately).Video 17

One HDMI device can be connected to the HDMI port on the computer. The information displayed onthe computer screen can be simultaneously displayed on the HDMI device.To connect a video or audio device to the HDMI port:1. Connect one end of the HDMI cable to the HDMI port on the computer.2. Connect the other end of the cable to the video device, and then refer to the device manufacturer’sinstructions for additional information.NOTE: For product-specific instructions on switching the screen image, refer to your Getting Startedguide.Configuring audio for HDMITo configure HDMI audio, first connect an audio or video device, such as a high-definition TV, to theHDMI port on your computer. Then configure the default audio playback device as follows:1. Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then clickPlayback devices.2. On the Playback tab, click either Digital Output or Digital Output Device (HDMI).3. Click Set Default, and then click OK.To return audio to the computer speakers, follow these steps:1. Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then clickPlayback devices.2. On the Playback tab, click Speakers.3. Click Set Default, and then click OK.18 Chapter 3 Multimedia

Using HP MediaSmart (select models only)HP MediaSmart turns your computer into a mobile entertainment center. With MediaSmart, you canenjoy music CDs and DVD and Blu-ray Disc (BD) movies. You can also manage and edit your photocollections. MediaSmart includes the following features:●Playlist upload support:◦Upload your MediaSmart photo playlists to Internet photo albums.◦Upload your MediaSmart video playlists to YouTube.◦Export your MediaSmart playlist to the CyberLink DVD Suite.●Pandora Internet radio (North America only)—Listen to music selected just for you, streamed fromthe Internet.▲To start MediaSmart, select Start > All Programs > HP > HP MediaSmart.For more information on using MediaSmart, select Start > Help and Support.Using HP MediaSmart (select models only) 19

4 Power managementNOTE: A computer may have a power button or a power switch. The term power button is usedthroughout this guide to refer to both types of power controls.NOTE: Windows 7 uses Sleep and Windows XP uses Standby. The term Sleep is used throughoutthis guide to refer to both. Differences between the operating systems that affect any of the proceduresare noted.Shutting down the computerCAUTION: Unsaved information is lost when the computer shuts down.The Shut down command closes all open programs, including the operating system, and then turns offthe display and computer.Shut down the computer under any of the following conditions:●When you need to replace the battery or access components inside the computer●When you are connecting an external hardware device that does not connect to a USB port●When the computer will be unused and disconnected from external power for an extended periodAlthough you can shut down the computer with the power button, the recommended procedure is to usethe Windows Shut down command:NOTE: If the computer is in the Sleep state or in Hibernation, you must first exit Sleep or Hibernationbefore shutdown is possible.1. Save your work and close all open programs.2. Windows 7—Select Start > Shut down.Windows XP—Select Start > Turn Off Computer > Turn Off.NOTE: If you have been registered to a network domain, the button you click is called Shut Downinstead of Turn Off Computer.If the computer is unresponsive and you are unable to use the preceding shutdown procedures, try thefollowing emergency procedures in the sequence provided:●Windows 7—Press ctrl+alt+delete, and then click the Power button.Windows XP—Press ctrl+alt+delete. Click Shut Down, and then click Turn Off.●Press and hold the power button for at least 5 seconds.●Disconnect the computer from external power and remove the battery.Setting power optionsUsing power-saving statesThe computer has two power-saving states that are enabled at the factory: Sleep and Hibernation.20 Chapter 4 Power management

When Sleep is initiated, the power lights blink and the screen clears. Your work is saved to memory,letting you exit Sleep faster than exiting Hibernation. If the computer is in the Sleep state for an extendedperiod or if the battery reaches a critical battery level while in the Sleep state, the computer initiatesHibernation.When Hibernation is initiated, your work is saved to a hibernation file on the hard drive and the computerturns off.CAUTION: To reduce the risk of possible audio and video degradation, loss of audio or video playbackfunctionality, or loss of information, do not initiate Sleep or Hibernation while reading from or writing toa disc or an external media card.NOTE: You cannot initiate any type of networking connection or perform any computer functions whilethe computer is in the Sleep state or in Hibernation.Initiating and exiting SleepThe system is set at the factory to initiate Sleep after a period of inactivity when running on battery poweror on external power.Power settings and timeouts can be changed using Power Options in Windows® Control Panel.With the computer on, you can initiate Sleep in any of the following ways:●Briefly press the power button.●Close the display.●Windows 7—Select Start, click the arrow next to the Shut down button, and then click Sleep.Windows XP—Select Start > Turn Off Computer > Stand By.To exit Sleep:●Briefly press the power button.●If the display is closed, open the display.●Press a key on the keyboard.●Tap or swipe the TouchPad.When the computer exits Sleep, the power lights turn on and your work returns to the screen where youstopped working.NOTE: If you have set a password to be required on wakeup, you must enter your Windows passwordbefore your work will return to the screen.Initiating and exiting HibernationThe system is set at the factory to initiate Hibernation after a period of inactivity when running on batterypower or on external power, or when the battery reaches a critical battery level.Power settings and timeouts can be changed in Windows Control Panel.To initiate Hibernation:▲Windows 7—Select Start, click the arrow next to the Shut down button, and then clickHibernate.Windows XP—Select Start > Turn Off Computer, and then hold down the shift key and selectHibernate.Setting power options 21

To exit Hibernation:▲Briefly press the power button.The power lights turn on and your work returns to the screen where you stopped working.NOTE: If you have set a password to be required on wakeup, you must enter your Windows passwordbefore your work will return to the screen.Using the power meterThe power meter is located in the notification area, at the far right of the taskbar. The power meter allowsyou to quickly access power settings and view the remaining battery charge.●To display the percentage of remaining battery charge and the current power plan (or powerscheme in Windows XP), move the pointer over the power meter icon.●To access Power Options, or to change the power plan, click the power meter icon and select anitem from the list.Different power meter icons indicate whether the computer is running on battery or external power. Theicon also displays a message if the battery has reached a low or critical battery level.Using power plansA power plan (or power scheme in Windows XP) is a collection of system settings that manages howthe computer uses power. Power plans can help you conserve power or maximize performance.Viewing the current power planUse any of the following methods:●Click the power meter icon in the notification area, at the far right of the taskbar.●Windows 7—Select Start > Control Panel > System and Security > Power Options.Windows XP—Select Start > Control Panel > Performance and Maintenance > PowerOptions.Selecting a different power planUse any of the following methods:●Click the power meter icon in the notification area, and then select a power plan from the list.●Windows 7—Select Start > Control Panel > System and Security > Power Options, and thenselect an item from the list.Windows XP—Select Start > Control Panel > Performance and Maintenance > PowerOptions, and then select an item from the list.Customizing power plansWindows 71. Click the power meter icon in the notification area, and then click More power options.– or –Select Start > Control Panel > System and Security > Power Options.2. Select a power plan, and then click Change plan settings.22 Chapter 4 Power management

3. Change the settings as needed.4. To change additional settings, click Change advanced power settings and make your changes.Windows XP1. Select Start > Control Panel > Performance and Maintenance > Power Options.2. Select a power scheme from the Power schemes list.3. Modify the Plugged in and Running on batteries settings as needed.4. Click OK.Setting password protection on wakeupWindows 7To set the computer to prompt for a password when the computer exits Sleep or Hibernation, followthese steps:1. Select Start > Control Panel > System and Security > Power Options.2. In the left pane, click Require a password on wakeup.3. Click Change Settings that are currently unavailable.4. Click Require a password (recommended).NOTE: If you need to create a user account password or change your current user accountpassword, click Create or change your user account password, and then follow the on-screeninstructions. If you do not need to create or change a user account password, go to step 5.5. Click Save changes.Windows XP1. Right-click the Power Meter icon in the notification area, and then click Adjust PowerProperties.2. Click the Advanced tab.3. Select the Prompt for password when computer resumes from Standby check box.4. Click Apply.Using battery powerWhen a charged battery is in the computer and the computer is not plugged into external power, thecomputer runs on battery power. When the computer is plugged into external AC power, the computerruns on AC power.If the computer contains a charged battery and is running on external AC power, the computer switchesto battery power if the AC adapter is disconnected from the computer.NOTE: When you disconnect AC power, the display brightness is automatically decreased to savebattery life. For information on increasing or decreasing display brightness, refer to the GettingStarted guide.Select computer models can switch between graphic modes to increase battery life. For moreinformation, refer to Switching between graphics modes (select models only) on page 28.Using battery power 23

You can keep a battery in the computer or in storage, depending on how you work. Keeping the batteryin the computer whenever the computer is plugged into AC power charges the battery and also protectsyour work in case of a power outage. However, a battery in the computer slowly discharges when thecomputer is off and unplugged from external power.WARNING! To reduce potential safety issues, use only the battery provided with the computer, areplacement battery provided by HP, or a compatible battery purchased from HP.Computer battery life varies, depending on power management settings, programs running on thecomputer, display brightness, external devices connected to the computer, and other factors.Finding battery information in Help and Support in Windows 7Help and Support provides the following tools and information about the battery:●Battery Check tool to test battery performance●Information on calibration, power management, and proper care and storage to maximize batterylife●Information on battery types, specifications, life cycles, and capacityTo access battery information:▲Select Start > Help and Support > Learn > Power Plans: Frequently Asked Questions.Using Battery Check in Windows 7Battery Check in Help and Support provides information on the status of the battery installed in thecomputer.To run Battery Check:1. Connect the AC adapter to the computer.NOTE: The computer must be connected to external power for Battery Check to work properly.2. Select Start > Help and Support > Troubleshoot > Power, Thermal and Mechanical.3. Click the Power tab, and then click Battery Check.Battery Check examines the battery and its cells to see if they are functioning properly, and then reportsthe results of the examination.Displaying the remaining battery charge▲Move the pointer over the power meter icon in the notification area, at the far right of the taskbar.Maximizing battery discharge timeBattery discharge time varies depending on the features you use while on battery power. Maximumdischarge time gradually decreases as the battery storage capacity naturally degrades.Tips for maximizing battery discharge time:●Lower the brightness on the display.●Remove the battery from the computer when it is not being used or charged.●Store the battery in a cool, dry location.●Windows 7—Select the Power saver setting in Power Options.24 Chapter 4 Power management

Managing low battery levelsThe information in this section describes the alerts and system responses set at the factory. Some low-battery alerts and system responses can be changed using Power Options in Windows Control Panel.Preferences set using Power Options do not affect lights.Identifying low battery levelsWhen a battery that is the sole power source for the computer reaches a low or critical battery level, thefollowing behavior occurs:●The battery light (select models only) indicates a low or critical battery level.NOTE: For additional information about the battery light, refer to the Getting Started guide.– or –●The power meter icon in the notification area shows a low or critical battery notification.NOTE: For additional information about the power meter, refer to Using the power meteron page 22.The computer takes the following actions for a critical battery level:●If Hibernation is enabled and the computer is on or in the Sleep state, the computer initiatesHibernation.●If Hibernation is disabled and the computer is on or in the Sleep state, the computer remains brieflyin the Sleep state, and then shuts down and loses any unsaved information.Resolving a low battery levelResolving a low battery level when external power is available▲Connect one of the following devices:●AC adapter●Optional docking or expansion device●Optional power adapter purchased as an accessory from HPResolving a low battery level when a charged battery is available1. Turn off the computer or initiate Hibernation.2. Replace the discharged battery with a charged battery.3. Turn on the computer.Resolving a low battery level when no power source is available●Initiate Hibernation.●Save your work and shut down the computer.Using battery power 25

Resolving a low battery level when the computer cannot exit HibernationWhen the computer lacks sufficient power to exit Hibernation, follow these steps:1. Replace the discharged battery with a charged battery, or connect the AC adapter to the computerand to external power.2. Exit Hibernation by pressing the power button.Conserving battery power●Select low power-use settings through Power Options in Windows Control Panel.●Turn off wireless and local area network (LAN) connections and exit modem applications when youare not using them.●Disconnect unused external devices that are not plugged into an external power source.●Stop, disable, or remove any external media cards that you are not using.●Decrease screen brightness.●Before you leave your work, initiate Sleep or Hibernation, or shut down the computer.Storing a batteryCAUTION: To reduce the risk of damage to a battery, do not expose it to high temperatures forextended periods of time.If a computer will be unused and unplugged from external power for more than 2 weeks, remove thebattery and store it separately.To prolong the charge of a stored battery, place it in a cool, dry place.NOTE: A stored battery should be checked every 6 months. If the capacity is less than 50 percent,recharge the battery before returning it to storage.Calibrate a battery before using it if it has been stored for one month or more.Disposing of a used batteryWARNING! To reduce the risk of fire or burns, do not disassemble, crush, or puncture; do not shortexternal contacts; do not dispose of in fire or water.Refer to the Regulatory, Safety, and Environmental Notices for proper battery disposal.Replacing the batteryIn Windows 7, Battery Check in Help and Support notifies you to replace the battery when an internalcell is not charging properly or when the battery storage capacity has reached a weak condition. If thebattery is possibly covered by an HP warranty, instructions include a warranty ID. A message refers youto the HP Web site for more information about ordering a replacement battery.26 Chapter 4 Power management

Using external AC powerNOTE: For information on connecting to AC power, refer to the Quick Setup poster provided in thecomputer box.External AC power is supplied through an approved AC adapter or an optional docking or expansiondevice.WARNING! To reduce potential safety issues, use only the AC adapter provided with the computer,a replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP.Connect the computer to external AC power under any of the following conditions:WARNING! Do not charge the computer battery while you are onboard aircraft.●When charging or calibrating a battery●When installing or modifying system software●When writing information to a CD, a DVD, or a BD (select models only)●When running Disk Defragmenter●When performing a backup or recoveryWhen you connect the computer to external AC power, the following events occur:●The battery begins to charge.●If the computer is turned on, the power meter icon in the notification area changes appearance.When you disconnect external AC power, the following events occur:●The computer switches to battery power.●The display brightness is automatically decreased to save battery life.Using external AC power 27

Testing an AC adapterTest the AC adapter if the computer exhibits any of the following symptoms when it is connected to ACpower:●The computer does not turn on.●The display does not turn on.●The power lights are off.To test the AC adapter:1. Shut down the computer.2. Remove the battery from the computer.3. Connect the AC adapter to the computer, and then plug it into an AC outlet.4. Turn on the computer.●If the power lights turn on, the AC adapter is working properly.●If the power lights remain off, the AC adapter is not functioning and should be replaced.Contact technical support for information on obtaining a replacement AC power adapter.Switching between graphics modes (select models only)Select computers are equipped with switchable graphics and have two modes for processing graphics.When you switch from AC power to battery power, the computer can switch from using the high-performance mode to using the power-saving mode to conserve battery life. Similarly, when you switchfrom battery power to AC power, the computer can switch back to the high-performance mode.NOTE: In some instances, in order to optimize performance of the computer, the system does notallow you to switch modes, or it may prompt you to switch. It may also be necessary to close all programsbefore switching.NOTE: HDMI (select models only) only works in the high-performance mode. If you use the power-saving mode, you can not use HDMI.When you switch between AC and battery power, you are notified that the computer is about to switchgraphics modes. If you prefer, you can choose to continue using the same graphics mode. While thecomputer switches modes, the screen goes blank for a few seconds. When the switch is complete, anotification appears in the notification area, and the screen image reappears.NOTE: When select computer models are in slate mode, the screen orientation is reset when youswitch between graphics modes.To determine which graphics mode you are using:▲Right-click on a blank area of the computer desktop, and then click Configure SwitchableGraphics or Configure ATI PowerXpress™.28 Chapter 4 Power management

5 External cards and devicesUsing Digital Media Slot cards (select models only)Optional digital cards provide secure data storage and convenient data sharing. These cards are oftenused with digital media–equipped cameras and PDAs as well as with other computers.To determine the digital card formats that are supported on your computer, refer to the GettingStarted guide.Inserting a digital cardCAUTION: To reduce the risk of damage to the digital card connectors, use minimal force to insert adigital card.1. Hold the card label-side up, with the connectors facing the computer.2. Insert the card into the Digital Media Slot, and then press in on the card until it is firmly seated.You will hear a sound when the device has been detected, and a menu of options may be displayed.Removing a digital cardCAUTION: To reduce the risk of loss of data or an unresponsive system, use the following procedureto safely remove the digital card.1. Save your information and close all programs associated with the digital card.2. Click the remove hardware icon in the notification area, at the far right of the taskbar. Then followthe on-screen instructions.Using Digital Media Slot cards (select models only) 29

3. Either press in on the card (1), and then remove it from the slot (2).– or –Pull the card out of the slot.Using PC Cards (select models only)A PC Card is a credit card–sized accessory designed to conform to the standard specifications of thePersonal Computer Memory Card International Association (PCMCIA). The PC Card slot supports thefollowing types of PC Cards:●32-bit (CardBus) and 16-bit PC Cards●Type I and Type II PC CardsNOTE: Zoomed video PC Cards and 12-V PC Cards are not supported.Configuring a PC CardTo reduce the risk of loss of support for other PC Cards during configuration, install only the softwarerequired for the device. If you are instructed by the PC Card manufacturer to install device drivers:●Install only the device drivers for your operating system.●Do not install other software, such as card services, socket services, or enablers, supplied by thePC Card manufacturer.Inserting a PC CardCAUTION: To prevent damage to the computer and external media cards, do not insert anExpressCard into a PC Card slot.30 Chapter 5 External cards and devices

CAUTION: To reduce the risk of damage to the connectors:Use minimal force when inserting a PC Card.Do not move or transport the computer when a PC Card is in use.The PC Card slot may contain a protective insert. The insert must be removed before you can insert aPC Card:1. Press the PC Card eject button (1).This action extends the button into position for releasing the insert.2. Press the PC Card eject button again to release the insert.3. Pull the insert out of the slot (2).To insert a PC Card:1. Hold the card label-side up, with the connectors facing the computer.2. Insert the card into the PC Card slot, and then press in on the card until it is firmly seated.You will hear a sound when the card has been detected, and a menu of available options may bedisplayed.NOTE: The first time you connect a PC Card, a message in the notification area lets you knowthat the device is recognized by the computer.NOTE: To conserve power, stop or remove a PC Card when it is not in use.Using PC Cards (select models only) 31

Removing a PC CardCAUTION: To reduce the risk of loss of data or an unresponsive system, stop a PC Card beforeremoving it.1. Save your information and close all programs associated with the PC Card.2. Click the remove hardware icon in the notification area, at the far right of the taskbar, and thenfollow the on-screen instructions.3. Release and remove the PC Card:a. Press the PC Card eject button (1).This action extends the button into position for releasing the PC Card.b. Press the PC Card eject button again to release the PC Card.c. Pull the PC Card (2) out of the slot.Using ExpressCards (select models only)An ExpressCard is a high-performance PC Card that is inserted into the ExpressCard slot.Like standard PC Cards, ExpressCards are designed to conform to the standard specifications of thePersonal Computer Memory Card International Association (PCMCIA).Configuring an ExpressCardInstall only the software required for the card. If you are instructed by the ExpressCard manufacturer toinstall device drivers:●Install only the device drivers for your operating system.●Do not install additional software, such as card services, socket services, or enablers, that aresupplied by the ExpressCard manufacturer.32 Chapter 5 External cards and devices

Inserting an ExpressCardCAUTION: To prevent damage to the computer and external media cards, do not insert a PC Cardinto an ExpressCard slot.CAUTION: To reduce the risk of damage to the connectors:Use minimal force when inserting an ExpressCard.Do not move or transport the computer when an ExpressCard is in use.The ExpressCard slot may contain a protective insert. To remove the insert:1. Press in on the insert (1) to unlock it.2. Pull the insert out of the slot (2).To insert an ExpressCard:1. Hold the card label-side up, with the connectors facing the computer.2. Insert the card into the ExpressCard slot, and then press in on the card until it is firmly seated.You will hear a sound when the card has been detected, and a menu of options may be displayed.NOTE: The first time you connect an ExpressCard, a message in the notification area lets youknow that the card is recognized by the computer.NOTE: To conserve power, stop or remove an ExpressCard when it is not in use.Using ExpressCards (select models only) 33

Removing an ExpressCardCAUTION: To reduce the risk of loss of data or an unresponsive system, use the following procedureto safely remove the ExpressCard.1. Save your information and close all programs associated with the ExpressCard.2. Click the remove hardware icon in the notification area, at the far right of the taskbar, and thenfollow the on-screen instructions.3. Release and remove the ExpressCard:a. Gently press in on the ExpressCard (1) to unlock it.b. Pull the ExpressCard out of the slot (2).Using smart cards (select models only)NOTE: The term smart card is used throughout this chapter to refer to both smart cards and Java™Cards.A smart card is a credit card–sized accessory that carries a microchip containing memory and amicroprocessor. Like personal computers, smart cards have an operating system to manage input andoutput, and they include security features to protect against tampering. Industry-standard smart cardsare used with the smart card reader (select models only).A personal identification number (PIN) is needed to gain access to the contents of the microchip. Formore information about smart card security features, refer to Help and Support.34 Chapter 5 External cards and devices

Inserting a smart card1. Hold the card label-side up, and gently slide the card into the smart card reader until the card isseated.2. Follow the on-screen instructions for logging on to the computer using the smart card PIN.Removing a smart card▲Grasp the edge of the smart card, and then pull it out of the smart card reader.Using a USB deviceUniversal Serial Bus (USB) is a hardware interface that can be used to connect an optional externaldevice, such as a USB keyboard, mouse, drive, printer, scanner, or hub.Some USB devices may require additional support software, which is usually included with the device.For more information about device-specific software, refer to the manufacturer's instructions. Theseinstructions may be provided with the software, on disc, or on the manufacturer’s Web site.The computer has at least 1 USB port that supports USB 1.0, 1.1, 2.0, or 3.0 devices. Your computermay also have a powered USB port that provides power to an external device if it is used with a poweredUSB cable. An optional docking device or USB hub provides additional USB ports that can be used withthe computer.Connecting a USB deviceCAUTION: To reduce the risk of damage to a USB connector, use minimal force to connect the device.Using a USB device 35

▲Connect the USB cable for the device to the USB port.You will hear a sound when the device has been detected.NOTE: The first time you connect a USB device, a message in the notification area lets you know thatthe device is recognized by the computer.Removing a USB deviceCAUTION: To reduce the risk of damage to a USB connector, do not pull on the cable to remove theUSB device.CAUTION: To reduce the risk of loss of information or an unresponsive system, use the followingprocedure to safely remove the USB device.1. To remove a USB device, save your information and close all programs associated with the device.2. Click the remove hardware icon in the notification area, at the far right of the taskbar, and thenfollow the on-screen instructions.3. Remove the device.Using 1394 devices (select models only)IEEE 1394 is a hardware interface that connects a high-speed multimedia or data storage device to thecomputer. Scanners, digital cameras, and digital camcorders often require a 1394 connection.Some 1394 devices may require additional support software, which is usually included with the device.For more information about device-specific software, refer to the manufacturer's instructions.The 1394 port also supports IEEE 1394a devices.36 Chapter 5 External cards and devices

Connecting a 1394 deviceCAUTION: To reduce the risk of damage to a 1394 port connector, use minimal force to connect thedevice.▲To connect a 1394 device to the computer, connect the 1394 cable for the device to the 1394port.You will hear a sound when the device has been detected.Removing a 1394 deviceCAUTION: To reduce the risk of loss of information or an unresponsive system, stop the 1394 devicebefore removing it.CAUTION: To reduce the risk of damage to a 1394 connector, do not pull on the cable to remove the1394 device.1. To remove a 1394 device, save your information and close all programs associated with the device.2. Click the remove hardware icon in the notification area, at the far right of the taskbar, and thenfollow the on-screen instructions.3. Remove the device.Using an eSATA device (select models only)An eSATA port connects an optional high-performance eSATA component, such as an eSATA externalhard drive.Some eSATA devices may require additional support software, which is usually included with the device.For more information about device-specific software, refer to the manufacturer's instructions.NOTE: The eSATA port also supports an optional USB device.Connecting an eSATA deviceCAUTION: To reduce the risk of damage to an eSATA port connector, use minimal force to connectthe device.Using an eSATA device (select models only) 37

▲To connect an eSATA device to the computer, connect the eSATA cable for the device to theeSATA port.You will hear a sound when the device has been detected.Removing an eSATA deviceCAUTION: To reduce the risk of damage to an eSATA connector, do not pull on the cable to removethe eSATA device.CAUTION: To reduce the risk of loss of information or an unresponsive system, use the followingprocedure to safely remove the device.1. To remove an eSATA device, save your information and close all programs associated with thedevice.2. Click the remove hardware icon in the notification area, at the far right of the taskbar, and thenfollow the on-screen instructions.3. Remove the device.38 Chapter 5 External cards and devices

Using optional external devicesNOTE: For more information about required software and drivers, or to learn which computer port touse, refer to the manufacturer's instructions.To connect an external device to the computer:CAUTION: To reduce the risk of damage to the equipment when connecting a powered device, besure that the device is turned off and the AC power cord is unplugged.1. Connect the device to the computer.2. If you are connecting a powered device, plug the device power cord into a grounded AC outlet.3. Turn on the device.To disconnect an unpowered external device, turn off the device, and then disconnect it from thecomputer. To disconnect a powered external device, turn off the device, disconnect it from the computer,and then unplug the AC power cord.Using optional external drivesRemovable external drives expand your options for storing and accessing information. A USB drive canbe added by connecting the drive to a USB port on the computer.NOTE: HP external USB optical drives should be connected to the powered USB port on the computer.USB drives include the following types:●1.44-megabyte diskette drive●Hard drive module (a hard drive with an adapter attached)●External optical drive (CD, DVD, and Blu-ray)●MultiBay deviceUsing the expansion port (select models only)The expansion port connects the computer to an optional docking or expansion device, so that additionalports and connectors can be used with the computer.NOTE: The computer has only one expansion port. The term expansion port 3 describes the type ofexpansion port.Using optional external devices 39

Using the docking connector (select models only)The docking connector connects the computer to an optional docking device. An optional docking deviceprovides additional ports and connectors that can be used with the computer.NOTE: The following image may look slightly different than your computer or docking device.40 Chapter 5 External cards and devices

6 DrivesHandling drivesDrives are fragile computer components that must be handled with care. Refer to the following cautionsbefore handling drives. Additional cautions are included with the procedures to which they apply.Observe these precautions:●Before you move a computer that is connected to an external hard drive, initiate Sleep and allowthe screen to clear, or properly disconnect the external hard drive.●Before handling a drive, discharge static electricity by touching the unpainted metal surface of thedrive.●Do not touch the connector pins on a removable drive or on the computer.●Handle a drive carefully; do not drop a drive or place items on it.●Before removing or inserting a drive, shut down the computer. If you are unsure whether thecomputer is off, in the Sleep state, or in Hibernation, turn the computer on, and then shut it downthrough the operating system.●Do not use excessive force when inserting a drive into a drive bay.●Do not type on the keyboard or move the computer while an optical drive is writing to a disc. Thewrite process is sensitive to vibration.●When the battery is the only source of power, be sure that the battery is sufficiently charged beforewriting to media.●Avoid exposing a drive to temperature or humidity extremes.●Avoid exposing a drive to liquids. Do not spray the drive with cleaning products.●Remove media from a drive before removing the drive from the drive bay, or traveling with, shipping,or storing a drive.●If a drive must be mailed, place the drive in a bubble-pack mailer or other suitable protectivepackaging and label the package “FRAGILE.”●Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include airportwalk-through devices and security wands. Airport conveyer belts and similar security devices thatcheck carry-on baggage use X-rays instead of magnetism and do not damage drives.Using hard drivesImproving hard drive performanceUsing Disk DefragmenterAs you use the computer, files on the hard drive become fragmented. Disk Defragmenter consolidatesthe fragmented files and folders on the hard drive so that the system can run more efficiently.NOTE: It is not necessary to run Disk Defragmenter on solid-state drives.Handling drives 41

After you start Disk Defragmenter, it works without supervision. Depending on the size of your hard driveand the number of fragmented files, Disk Defragmenter may take more than an hour to complete. Youmay want to set it to run during the night or at another time when you do not need access to yourcomputer.HP recommends defragmenting your hard drive at least once a month. You may set Disk Defragmenterto run on a monthly schedule, but you can defragment your computer manually at any time.To run Disk Defragmenter:1. Connect the computer to AC power.2. Select Start > All Programs > Accessories > System Tools > Disk Defragmenter.3. Windows 7—Click Defragment disk.NOTE: Windows includes the User Account Control feature to improve the security of yourcomputer. You may be prompted for your permission or password for tasks such as installingsoftware, running utilities, or changing Windows settings. Refer to Help and Support for moreinformation.Windows XP— Under Volume, click the listing for the hard drive, usually listed as (C:), and thenclick Defragment.For additional information, access the Disk Defragmenter software Help.Using Disk CleanupDisk Cleanup searches the hard drive for unnecessary files that you can safely delete to free up diskspace and help the computer to run more efficiently.To run Disk Cleanup:1. Select Start > All Programs > Accessories > System Tools > Disk Cleanup.2. Follow the on-screen instructions.Using HP ProtectSmart Hard Drive Protection in Windows 7 (select modelsonly)HP ProtectSmart Hard Drive Protection protects a hard drive by parking the drive and halting datarequests under either of the following conditions:●You drop the computer.●You move the computer with the display closed while the computer is running on battery power.A short time after the end of one of these events, HP ProtectSmart Hard Drive Protection returns thehard drive to normal operation.NOTE: Because solid-state drives (SSD) lack moving parts, HP ProtectSmart Hard Drive Protectionis unnecessary.NOTE: Hard drives in the primary hard drive bay or in the secondary hard drive bay are protected byHP ProtectSmart Hard Drive Protection. Hard drives connected to USB ports are not covered by HPProtectSmart Hard Drive Protection.For more information, refer to the HP ProtectSmart Hard Drive Protection software Help.42 Chapter 6 Drives

Identifying HP ProtectSmart Hard Drive Protection statusThe drive light on the computer changes color to show that a drive in the primary hard drive bay or adrive in the secondary hard drive bay (select models only) is parked. To determine whether drives arecurrently protected or whether a drive is parked, select Start > Control Panel > Hardware andSound > Windows Mobility Center:●If HP ProtectSmart Hard Drive Protection is enabled, a green check mark is superimposed overthe hard drive icon.●If HP ProtectSmart Hard Drive Protection is disabled, a red X is superimposed over the hard driveicon.●If the drives are parked, a yellow moon is superimposed over the hard drive icon.The icon in the Mobility Center may not show the most up-to-date status for the drive. For immediateupdates after a change in status, you need to enable the notification area icon.To enable the notification area icon:1. Select Start > Control Panel > Hardware and Sound > HP ProtectSmart Hard DriveProtection.NOTE: If prompted by User Account Control, click Yes.2. On the Icon in System Tray row, click Show.3. Click OK.Managing power with a parked hard driveIf HP ProtectSmart Hard Drive Protection has parked the drive, the computer behaves in the followingways:●The computer will not shut down.●The computer will not initiate Sleep or Hibernation, except as described in the following Note.NOTE: If the computer is running on battery power and reaches a critical battery level, HPProtectSmart Hard Drive Protection allows the computer to initiate Hibernation.Before you move the computer, HP recommends that you either shut it down or initiate Sleep orHibernation.Using HP ProtectSmart Hard Drive Protection softwareThe HP ProtectSmart Hard Drive Protection software can be enabled or disabled by an Administrator.NOTE: Depending on your user privileges, you may be unable to enable or disable HP ProtectSmartHard Drive Protection. Privileges for non-Administrator users can be changed by members of anAdministrator group.Using hard drives 43

To open the software and change settings, follow these steps:1. In Mobility Center, click the hard drive icon to open the HP ProtectSmart Hard Drive Protectionwindow.– or –Select Start > Control Panel > Hardware and Sound > HP ProtectSmart Hard DriveProtection.NOTE: If prompted by User Account Control, click Yes.2. Click the appropriate button to change settings.3. Click OK.Using optical drives (select models only)Optical drives include the following:●CD●DVD●Blu-ray (BD)Identifying the installed optical drive▲Windows 7—Select Start > Computer.Windows XP—Select Start > My Computer.A list of all the devices installed in your computer, including your optical drive, is displayed.44 Chapter 6 Drives

Inserting an optical discTray load1. Turn on the computer.2. Press the release button (1) on the drive bezel to release the disc tray.3. Pull out the tray (2).4. Hold the disc by the edges to avoid touching the flat surfaces and position the disc label-side upover the tray spindle.NOTE: If the tray is not fully accessible, tilt the disc carefully to position it over the spindle.5. Gently press the disc (3) down onto the tray spindle until the disc snaps into place.6. Close the disc tray.NOTE: After you insert a disc, a short pause is normal. If you have not selected a media player, anAutoPlay dialog box opens. It prompts you to select how you want to use the media content.Slot loadCAUTION: Do not insert 8-cm optical discs into a slot load optical drive. It may cause damage to theoptical drive.1. Turn on the computer.2. Hold the disc by the edges to avoid touching the flat surfaces and position the disc label-side up.Using optical drives (select models only) 45

3. Gently slide the disc into the slot load optical drive.Removing an optical discTray loadThere are 2 ways to remove a disc, depending on whether the disc tray opens normally or not.When the disc tray opens normally1. Press the release button (1) on the drive bezel to release the disc tray, and then gently pull out thetray (2) until it stops.2. Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outeredges of the disc. Hold the disc by the edges and avoid touching the flat surfaces.NOTE: If the tray is not fully accessible, tilt the disc carefully as you remove it.3. Close the disc tray and place the disc in a protective case.When the disc tray fails to open1. Insert the end of a paper clip (1) into the release access in the front bezel of the drive.2. Press in gently on the paper clip until the tray is released, and then pull out the tray (2) until it stops.46 Chapter 6 Drives

3. Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outeredges of the disc. Hold the disc by the edges and avoid touching the flat surfaces.NOTE: If the tray is not fully accessible, tilt the disc carefully as you remove it.4. Close the disc tray and place the disc in a protective case.Slot load1. Press the release button (1) next to the drive.2. Remove the disc (2) by holding it by the edges and avoid touching the flat surfaces.3. Place the disc in a protective case.Using optical drives (select models only) 47

Sharing optical drivesAlthough your computer may not have an integrated optical drive, you can access software and data,and install applications, by sharing an optical drive connected to another computer in your network.Sharing drives is a feature of the Windows operating system that allows a drive on one computer to beaccessible to other computers on the same network.NOTE: You must have a network set up in order to share an optical drive; refer to Networking (selectmodels only) on page 2 for additional information on setting up a network.NOTE: Some discs, such as DVD movies and game discs, may be copy-protected and thereforeunusable through DVD or CD drive sharing.To share an optical drive:1. Windows 7—From the computer with the optical drive you are sharing, select Start >Computer.Windows XP—From the computer with the optical drive you are sharing, select Start > MyComputer.2. Right-click the optical drive you want to share, and click Properties.3. Windows 7—Select the Sharing tab > Advanced Sharing.Windows XP—Select the Sharing tab.4. Select the Share this folder check box.5. Type a name for the optical drive in the Share name text box.6. Click Apply, and then click OK.7. To view the shared optical drive:Windows 7—Select Start > Control Panel > Network and Internet > Network and SharingCenter.Windows XP—Select Start > Control Panel > Network and Internet Connections.Using RAID (select models only)Redundant Arrays of Independent Disks (RAID) technology allows a computer to use two or more harddisks at the same time. RAID treats multiple drives as one contiguous drive, either through hardware orsoftware settings. If multiple disks are set up to work together in this fashion, they are referred to as aRAID array.For additional information about RAID, refer to the HP Web site at http://www.hp.com/support.48 Chapter 6 Drives

7 SecurityProtecting the computerStandard security features provided by the Windows® operating system and the non-Windows SetupUtility can protect your personal settings and data from a variety of risks.NOTE: Security solutions are designed to act as deterrents, but they may not deter software attacksor prevent the computer from being mishandled or stolen.NOTE: Before you send your computer for service, back up and delete confidential files, and removeall password settings.NOTE: Some features listed in this chapter may not be available on your computer.Computer risk Security featureUnauthorized use of the computer ●QuickLock (select models only)●Power-on password●Fingerprint readerComputer viruses Antivirus softwareUnauthorized access to data ●Firewall software●Windows updates●File encryptionUnauthorized access to Setup Utility, BIOS settings, and othersystem identification informationAdministrator passwordOngoing or future threats to the computer Critical security updates from MicrosoftUnauthorized access to a Windows user account User passwordUnauthorized removal of the computer Security cable slot (used with an optional security cable)Using passwordsA password is a group of characters that you choose to secure your computer information. Several typesof passwords can be set, depending on how you want to control access to your information. Passwordscan be set in Windows or in the non-Windows Setup Utility that is preinstalled on the computer.NOTE: To reduce the risk of being locked out of the computer, record each password and store it ina secure place.You can use the same password for a Setup Utility feature and for a Windows security feature. You canalso use the same password for more than one Setup Utility feature.For additional information about Windows passwords, such as screen-saver passwords, select Start> Help and Support.Protecting the computer 49

Setting passwords in WindowsPassword FunctionAdministrator password Protects administrator-level access to computer contents.NOTE: This password cannot be used to access Setup Utilitycontents.User password Protects access to a Windows user account. It also protectsaccess to the computer contents and must be entered whenyou exit Sleep or Hibernation.QuickLock (select models only) Protects your information by displaying the operating systemLog On window. While the Log On window is displayed, thecomputer cannot be accessed until a Windows user passwordor a Windows administrator password is entered. After you seta user or administrator password, follow these steps:1. Initiate QuickLock.2. Exit QuickLock by entering your Windows user oradministrator password.Setting passwords in Setup UtilityPassword FunctionAdministrator password* ●Protects access to Setup Utility.●After this password is set, it must be entered each timeyou access Setup Utility.CAUTION: If you forget your administrator password, youcannot access Setup Utility.NOTE: The administrator password can be used in place ofthe power-on password.NOTE: Your administrator password is not interchangeablewith an administrator password set in Windows, nor is itdisplayed as it is set, entered, changed, or deleted.NOTE: If you enter the power-on password at the firstpassword check before the “Press the ESC key for StartupMenu” message is displayed, you must enter the administratorpassword to access Setup Utility.Power-on password* ●Protects access to the computer contents.●After this password is set, it must be entered each timeyou turn on or restart the computer, or exit Hibernation.CAUTION: If you forget your power-on password, youcannot turn on or restart the computer, or exit Hibernation.NOTE: The administrator password can be used in place ofthe power-on password.NOTE: A power-on password is not displayed as it is set,entered, changed, or deleted.*For details about each of these passwords, refer to the following topics.50 Chapter 7 Security

Managing an administrator passwordTo set, change, or delete this password, follow these steps:1. Open Setup Utility by turning on or restarting the computer. While the “Press the ESC key forStartup Menu” message is displayed in the lower-left corner of the screen, press esc. When theStartup Menu is displayed, press f10.2. Use the arrow keys to select Security > Set Administrator Password, and then press enter.●To set an administrator password, type your password in the Enter New Password andConfirm New Password fields, and then press enter.●To change an administrator password, type your current password in the Enter CurrentPassword field, type a new password in the Enter New Password and Confirm NewPassword fields, and then press enter.●To delete an administrator password, type your current password in the Enter Password field,and then press enter 4 times.3. To save your changes and exit Setup Utility, use the arrow keys to select Exit > Exit SavingChanges.Your changes take effect when the computer restarts.Entering an administrator passwordAt the Enter Password prompt, type your administrator password, and then press enter. After 3unsuccessful attempts to enter the administrator password, you must restart the computer and try again.Managing a power-on passwordTo set, change, or delete this password, follow these steps:1. Open Setup Utility by turning on or restarting the computer. While the “Press the ESC key forStartup Menu” message is displayed in the lower-left corner of the screen, press esc. When theStartup Menu is displayed, press f10.2. Use the arrow keys to select Security > Set Power-On Password, and then press enter.●To set a power-on password, type your password in the Enter New Password and ConfirmNew Password fields, and then press enter.●To change a power-on password, type your current password in the Enter CurrentPassword field, type a new password in the Enter New Password and Confirm NewPassword fields, and then press enter.●To delete a power-on password, type your current password in the Enter CurrentPassword field, and then press enter 4 times.3. To save your changes and exit Setup Utility, use the arrow keys to select Exit > Exit SavingChanges.Your changes take effect when the computer restarts.Entering a power-on passwordAt the Enter Password prompt, type your password, and then press enter. After 3 unsuccessful attemptsto enter the password, you must restart the computer and try again.Using passwords 51

Using antivirus softwareWhen you use the computer to access e-mail, a network, or the Internet, you potentially expose it tocomputer viruses. Computer viruses can disable the operating system, programs, or utilities, or causethem to function abnormally.Antivirus software can detect most viruses, destroy them, and, in most cases, repair any damage theyhave caused. To provide ongoing protection against newly discovered viruses, antivirus software mustbe kept up to date.An antivirus program may be preinstalled on your computer and may include a trial offer. It is stronglyrecommended that you upgrade the trial offer or purchase the antivirus program of your choice in orderto fully protect your computer.For more information about computer viruses, type viruses in the Search box in Help and Support.Using firewall softwareFirewalls are designed to prevent unauthorized access to a system or network. A firewall can be asoftware program you install on your computer and/or network, or it can be a solution made up of bothhardware and software.There are two types of firewalls to consider:●Host-based firewalls—Software that protects only the computer it is installed on.●Network-based firewalls—Installed between your DSL or cable modem and your home network toprotect all the computers on the network.When a firewall is installed on a system, all data sent to and from the system is monitored and comparedwith a set of user-defined security criteria. Any data that does not meet those criteria is blocked.Your computer or networking equipment may already have a firewall installed. If not, firewall softwaresolutions are available.NOTE: Under some circumstances a firewall can block access to Internet games, interfere with printeror file sharing on a network, or block authorized e-mail attachments. To temporarily resolve the problem,disable the firewall, perform the task that you want to perform, and then reenable the firewall. Topermanently resolve the problem, reconfigure the firewall.Installing critical security updatesCAUTION: Microsoft sends out alerts regarding critical updates. To protect the computer from securitybreaches and computer viruses, install all critical updates from Microsoft as soon as you receive analert.Updates to the operating system and other software may have become available after the computer leftthe factory. To be sure that all available updates are installed on the computer, observe these guidelines:●Run Windows Update as soon as possible after you set up your computer. Use the update link atStart > All Programs > Windows Update.●Run Windows Update monthly thereafter.●Obtain updates to Windows and other Microsoft® programs, as they are released, from theMicrosoft Web site and through the updates link in Help and Support.52 Chapter 7 Security

Installing an optional security cableNOTE: A security cable is designed to act as a deterrent, but it may not prevent the computer frombeing mishandled or stolen.NOTE: The security cable slot on your computer may look slightly different from the illustration in thissection. Refer to the Getting Started guide for the location of the security cable slot on your computer.1. Loop the security cable around a secured object.2. Insert the key (1) into the cable lock (2).3. Insert the cable lock into the security cable slot on the computer (3), and then lock the cable lockwith the key.4. Remove the key and keep it in a safe place.Using the fingerprint reader (select models only)Integrated fingerprint readers are available on select computer models. In order to use the fingerprintreader, you must set up a user account with a password on the computer. This account allows you tolog on to your computer with a swipe of a designated finger. You may also use the fingerprint reader tofill in password fields on Web sites and other programs that require a logon. Refer to the fingerprintsoftware Help for instructions.After you create your fingerprint identity, you can set up a Single Sign On service that allows you to useyour fingerprint scanner to create credentials for any application that requires a user name andpassword.Locating the fingerprint readerThe fingerprint reader is a small metallic sensor that is located in one of the following areas of yourcomputer:●Near the bottom of the TouchPad●On the right side of the keyboardInstalling an optional security cable 53

●On the upper-right side of the display●On the left side of the displayDepending on your computer model, the fingerprint reader may be oriented horizontally or vertically.Both orientations require that you swipe your finger perpendicular to the metallic sensor. Refer to theGetting Started guide for the location of the fingerprint reader on your computer.54 Chapter 7 Security

8 Setup Utility (BIOS)Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input andoutput devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup Utilityincludes settings for the types of peripherals installed, the startup sequence of the computer, and theamount of system and extended memory.CAUTION: Use extreme care when making changes in Setup Utility. Errors can prevent the computerfrom operating properly.Starting Setup UtilityNOTE: The fingerprint reader (select models only) cannot be used to access Setup Utility.▲Turn on or restart the computer. While the “Press the ESC key for Startup Menu” message isdisplayed in the lower-left corner of the screen, press esc. When the Startup Menu is displayed,press f10.Using Setup UtilityChanging the language of Setup Utility1. Start Setup Utility.2. Use the arrow keys to select System Configuration > Language, and then press enter.3. Use the arrow keys to select a language, and then press enter.4. When a confirmation prompt with your language selected is displayed, press enter.5. To save your change and exit Setup Utility, use the arrow keys to select Exit > Exit SavingChanges, and then press enter.Your change takes effect immediately.Navigating and selecting in Setup UtilityBecause Setup Utility is not Windows based, it does not support the TouchPad. Navigation and selectionare by keystroke.●To choose a menu or a menu item, use the arrow keys.●To choose an item in a list or to toggle a field—for example an Enable/Disable field—use eitherthe arrow keys or f5 and f6.●To select an item, press enter.●To close a text box or return to the menu display, press esc.●To display additional navigation and selection information while Setup Utility is open, press f1.Starting Setup Utility 55

Displaying system information1. Start Setup Utility.2. Select the Main menu. System information such as the system time and date, and identificationinformation about the computer is displayed.3. To exit Setup Utility without changing any settings, use the arrow keys to select Exit > ExitDiscarding Changes, and then press enter.Restoring factory default settings in Setup Utility1. Start Setup Utility.2. Use the arrow keys to select Exit > Load Setup Defaults, and then press enter.3. When the Setup Confirmation is displayed, press enter.4. To save your change and exit Setup Utility, use the arrow keys to select Exit > Exit SavingChanges, and then press enter.The Setup Utility factory settings take effect when the computer restarts.NOTE: Your password, security, and language settings are not changed when you restore the factorysettings.Exiting Setup Utility●To exit Setup Utility and save your changes from the current session:If the Setup Utility menus are not visible, press esc to return to the menu display. Then use thearrow keys to select Exit > Exit Saving Changes, and then press enter.●To exit Setup Utility without saving your changes from the current session:If the Setup Utility menus are not visible, press esc to return to the menu display. Then use thearrow keys to select Exit > Exit Discarding Changes, and then press enter.56 Chapter 8 Setup Utility (BIOS)

Updating the BIOSUpdated versions of the BIOS may be available on the HP Web site.Most BIOS updates on the HP Web site are packaged in compressed files called SoftPaqs.Some download packages contain a file named Readme.txt, which contains information regardinginstalling and troubleshooting the file.Determining the BIOS versionTo determine whether available BIOS updates contain later BIOS versions than those currently installedon the computer, you need to know the version of the system BIOS currently installed.BIOS version information (also known as ROM date and System BIOS) can be displayed by pressingfn+esc (if you are already in Windows) or by using Setup Utility.1. Start Setup Utility.2. If the system information is not displayed, use the arrow keys to select the Main menu.BIOS and other system information is displayed.3. To exit Setup Utility, use the arrow keys to select Exit > Exit Discarding Changes, and then pressenter.Downloading a BIOS updateCAUTION: To reduce the risk of damage to the computer or an unsuccessful installation, downloadand install a BIOS update only when the computer is connected to reliable external power using the ACadapter. Do not download or install a BIOS update while the computer is running on battery power,docked in an optional docking device, or connected to an optional power source. During the downloadand installation, follow these instructions:Do not disconnect power from the computer by unplugging the power cord from the AC outlet.Do not shut down the computer or initiate Sleep or Hibernation.Do not insert, remove, connect, or disconnect any device, cable, or cord.1. Access the page on the HP Web site that provides software for your computer:Windows 7—Select Start > Help and Support > Maintain.Windows XP—Select Start > Help and Support, and then select the software and drivers update.2. Follow the on-screen instructions to identify your computer and access the BIOS update you wantto download.3. At the download area, follow these steps:a. Identify the BIOS update that is later than the BIOS version currently installed on yourcomputer. Make a note of the date, name, or other identifier. You may need this informationto locate the update later, after it has been downloaded to your hard drive.b. Follow the on-screen instructions to download your selection to the hard drive.Make a note of the path to the location on your hard drive where the BIOS update isdownloaded. You will need to access this path when you are ready to install the update.NOTE: If you connect your computer to a network, consult the network administrator beforeinstalling any software updates, especially system BIOS updates.Updating the BIOS 57

BIOS installation procedures vary. Follow any instructions that are displayed on the screen after thedownload is complete. If no instructions are displayed, follow these steps:1. Windows 7—Open Windows Explorer by selecting Start > Computer.Windows XP—Open Windows Explorer by selecting Start > My Computer.2. Double-click your hard drive designation. The hard drive designation is typically Local Disk (C:).3. Using the hard drive path you recorded earlier, open the folder on your hard drive that contains theupdate.4. Double-click the file that has an .exe extension (for example, filename.exe).The BIOS installation begins.5. Complete the installation by following the on-screen instructions.NOTE: After a message on the screen reports a successful installation, you can delete the downloadedfile from your hard drive.58 Chapter 8 Setup Utility (BIOS)

A Traveling with the computerFor best results, follow these traveling and shipping tips:●Prepare the computer for traveling or shipping:◦Back up your information.◦Remove all discs and all external media cards, such as digital cards.CAUTION: To reduce the risk of damage to the computer, damage to a drive, or loss ofinformation, remove the media from a drive before removing the drive from a drive bay andbefore shipping, storing, or traveling with a drive.◦Turn off and then disconnect all external devices.◦Shut down the computer.●Take along a backup of your information. Keep the backup separate from the computer.●When traveling by air, carry the computer as hand luggage; do not check it in with the rest of yourbags.CAUTION: Avoid exposing a drive to magnetic fields. Security devices with magnetic fieldsinclude airport walk-through devices and security wands. Airport conveyer belts and similar securitydevices that check carry-on baggage use X-rays instead of magnetism and do not damage drives.●In-flight computer use is at the discretion of the airline. If you plan to use the computer during aflight, check with the airline in advance.●If the computer will be unused and disconnected from external power for more than 2 weeks,remove the battery and store it separately.●If you are shipping the computer or a drive, use suitable protective packaging and label the package“FRAGILE.”●If the computer has a wireless device or an HP Mobile Broadband Module installed, such as an802.11b/g device, a Global System for Mobile Communications (GSM) device, or a General PacketRadio Service (GPRS) device, the use of these devices may be restricted in some environments.Such restrictions may apply onboard aircraft, in hospitals, near explosives, and in hazardouslocations. If you are uncertain of the policy that applies to the use of a particular device, ask forauthorization to use it before you turn it on.●If you are traveling internationally, follow these suggestions:◦Check the computer-related customs regulations for each country or region on your itinerary.◦Check the power cord and adapter requirements for each location in which you plan to usethe computer. Voltage, frequency, and plug configurations vary.WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do notattempt to power the computer with a voltage converter kit sold for appliances.59

B Troubleshooting resources●Access Web site links and additional information about the computer through Help and Support.Select Start > Help and Support.NOTE: Some checkup and repair tools require an Internet connection. HP also providesadditional tools that do not require an Internet connection.●Contact HP Customer Support at http://www.hp.com/go/contactHP.NOTE: For worldwide support, click Contact HP worldwide on the left side of the page, or go tohttp://welcome.hp.com/country/us/en/wwcontact_us.html.Choose from the following types of support:◦Chat online with an HP technician.NOTE: When chat is not available in a particular language, it is available in English.◦E-mail HP Customer Support.◦Find HP Customer Support worldwide telephone numbers.◦Locate an HP service center.60 Appendix B Troubleshooting resources

C Electrostatic DischargeElectrostatic discharge is the release of static electricity when two objects come into contact—forexample, the shock you receive when you walk across the carpet and touch a metal door knob.A discharge of static electricity from fingers or other electrostatic conductors may damage electroniccomponents. To prevent damage to the computer, damage to a drive, or loss of information, observethese precautions:●If removal or installation instructions direct you to unplug the computer, unplug it after being properlygrounded and before removing a cover.●Keep components in their electrostatic-safe containers until you are ready to install them.●Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible.●Use nonmagnetic tools.●Before handling components, discharge static electricity by touching an unpainted metal surfaceof the component.●If you remove a component, place it in an electrostatic-safe container.If you need more information about static electricity or assistance with component removal or installation,contact Customer Support.61

IndexSymbols/Numerics1394 cable, connecting 371394 devicesconnecting 37defined 36removing 3716-bit PC Cards 3032-bit PC Cards 30AAC adapter, testing 28action keysmedia 14volume 14administrator passwordcreating 51entering 51managing 51airport security devices 41antivirus software, using 52audio functions, checking 15Bbatteryconserving power 26discharging 24displaying remainingcharge 24disposing 26low battery levels 25replacing 26storing 26Battery Check 24battery information, finding 24battery power 23battery temperature 26BIOSdetermining version 57downloading an update 57updating 57Bluetooth device 2, 8buttonsmedia 14power 20volume 14wireless 3Ccables1394 37eSATA 38USB 36CardBus PC Cards 30checking audio functions 15computer, traveling 26, 59configuring audio for HDMI 18configuring ExpressCards 32configuring PC Cards 30connecting to a wired network 9connecting to an existing wirelessnetwork 5Connection Manager 4connector, docking 40conservation, power 26creating a wireless connection 2critical battery level 21, 25critical security updates,installing 52Ddefault settings, restoring 56digital cardinserting 29removing 29supported formats 29Disk Cleanup software 42Disk Defragmenter software 41DisplayPort, connecting 17docking connector 40drive light 43drive media 21drivers 30drivesexternal 39handling 41hard 39optical 39using 41Eelectrostatic discharge 61entering a power-onpassword 51entering an administratorpassword 51eSATA cable, connecting 38eSATA devicesconnecting 37defined 37removing 38existing wireless network,connecting to 5expansion port 39ExpressCardconfiguring 32defined 32inserting 33removing 34removing insert 33external AC power, using 27external devices 39external drive 39external monitor port 16Ffactory settings, restoring 56finding more information 1fingerprint readerlocating 53using 53firewall software 6, 52GGPS 9graphics modes, switching 28Hhard driveexternal 39HP ProtectSmart Hard DriveProtection 42HDMIconfiguring audio 1862 Index

HDMI port, connecting 17Hibernationexiting 21initiated during critical batterylevel 25initiating 21high-definition devices,connecting 17HP Connection Manager 4HP MediaSmart 19HP Mobile BroadbandModule 7HP ProtectSmart Hard DriveProtection 42HP SkyRoom 16HP USB Ethernet Adapter,connecting 12HP Wireless Assistant 4hubs 35Iiconsnetwork 2wireless 2installingcritical security updates 52optional security cable 53Internet connection setup 6JJava Carddefined 34inserting 35removing 35Kkeysmedia 14volume 14Llights, drive 43local area network (LAN)cable required 12connecting cable 12low battery level 25MmaintenanceDisk Cleanup 42Disk Defragmenter 41managing a power-onpassword 51managing an administratorpassword 51media action keys 14media activity controls 14media hotkeys 14MediaSmart 19modemsconnecting a modem cable 9connecting a modem cableadapter 10selecting a location setting 10Nnetwork cable, connecting 12network icon 2Ooperating system controls 5optical discinserting 45removing 46optical drive 39optional external devices,using 39Ppasswordsset in Setup Utility 50set in Windows 50PC Cardsconfiguring 30description 30inserting 30removing 32removing insert 31software and drivers 30supported types 30portsDisplayPort 17expansion 39external monitor 16HDMI 17VGA 16powerbattery 23conserving 26options 20power button 20power meter 22power planscustomizing 22selecting 22viewing current 22power switch 20power-on passwordcreating 51entering 51managing 51power-saving states 20protecting the computer 49protecting your wirelessnetwork 6QQuickLock 49, 50RRAID 48readable media 21roaming to another network 7Ssecurity cable, installing 53security, wireless 6setting password protection onwakeup 23setting power options 20setup of WLAN 6Setup Utilitychanging the language 55displaying systeminformation 56exiting 56navigating 55passwords set in 50restoring default settings 56selecting 55starting 55sharing optical drives 48shutdown 20SIMinserting 7removing 8SkyRoom 16Sleepexiting 21initiating 21slot-load optical drive 45smart carddefined 34Index 63

inserting 35removing 35softwareDisk Cleanup 42Disk Defragmenter 41HP Connection Manager 4HP MediaSmart 19HP ProtectSmart Hard DriveProtection 43HP SkyRoom 16HP Wireless Assistant 4Standby 20storing a battery 26switch, power 20switchable graphics 28system information, displaying 56Ttemperature 26testing an AC adapter 28traveling with the computer 26,59tray-load optical drive 45troubleshooting resources 60turning off the computer 20turning wireless devices on oroff 3Uunresponsive system 20USB cable, connecting 36USB devicesconnecting 35description 35removing 36USB hubs 35using a modem 9using external AC power 27using passwords 49using power plans 22using power-saving states 20using the power meter 22VVGA port, connecting 16video 16volumeadjusting 14buttons 14keys 14Wwebcam 16Windows, passwords set in 50wirelessaction key 3button 3icons 2protecting 6set up 6switch 3Wireless Assistant software 4wireless connection, creating 2wireless devices, turning on oroff 3wireless encryption 6wireless network (WLAN)connecting to existing 5equipment needed 6security 6writable media 21WWAN device 7Zzoomed video PC Cards 3064 Index

Regulatory, Safety andEnvironmental NoticesUser Guide

© Copyright 2008–2011 Hewlett-PackardDevelopment Company, L.P.Bluetooth is a trademark owned by itsproprietor and used by Hewlett-PackardCompany under license. ENERGY STAR isa registered mark owned by the U.S.government. Java is a trademark of SunMicrosystems. Microsoft, Windows, andWindows Vista are U.S. registeredtrademarks of Microsoft Corporation.The information contained herein is subjectto change without notice. The onlywarranties for HP products and services areset forth in the express warranty statementsaccompanying such products and services.Nothing herein should be construed asconstituting an additional warranty. HP shallnot be liable for technical or editorial errorsor omissions contained herein.First Edition: February 2011Document Part Number: 653267-001

New Zealand modem statements ...................................................................................... 15Voice support .................................................................................................... 16Power cord notice ............................................................................................................................... 16Japan power cord notice .................................................................................................... 16DC plug of external HP power supply ................................................................................ 16Macrovision Corporation notice .......................................................................................................... 162 Safety notices ................................................................................................................................................ 17Heat-related safety warning notice ..................................................................................................... 17Potential safety conditions notice ....................................................................................................... 17Battery notices .................................................................................................................................... 17Headset and earphone volume level notice ....................................................................................... 17Power cord notices ............................................................................................................................. 18Cleaning the keyboard ....................................................................................................................... 18Travel notice ....................................................................................................................................... 18Norway and Sweden: Cable grounding notice for products with a TV tuner ...................................... 183 Environmental notices ................................................................................................................................. 19Electronic hardware and battery recycling ......................................................................................... 19Disposal of waste equipment by users in private households in the European Union ....................... 19Chemical substances ......................................................................................................................... 19China material content declarations ................................................................................................... 20Japan material content declaration .................................................................................................... 22Turkey EEE regulation ....................................................................................................................... 22Ukraine Restriction of Hazardous Substances ................................................................................... 23United States mercury disposal .......................................................................................................... 23Perchlorate material—special handling may apply ............................................................................ 23Index ................................................................................................................................................................... 24iv

1 Regulatory noticesThis guide provides country- and region-specific non-wireless and wireless regulatory notices andcompliance information for the computer product. Some of these notices may not apply to yourproduct.One or more integrated wireless devices may be installed. In some environments, the use of wirelessdevices may be restricted. Such restrictions may apply on-board airplanes, in hospitals, nearexplosives, in hazardous locations, and so on. If you are uncertain of the policy that applies to the useof this product, ask for authorization to use it before you turn it on.To identify a hardware device such as a wireless LAN (WLAN) network device, choose the procedurebelow that corresponds to the operating system running on your computer.For Windows® XP Professional and Windows XP Home, follow these steps:1. Select Start > My Computer.2. If the left pane, select View System Information > Hardware tab > Device Manager.For Windows Vista®, follow these steps:1. Select Start > Computer > System properties.2. In the left pane, click Device Manager.For later Windows operating systems, such as Windows 7, follow these steps:▲Select Start > Control Panel > System and Security > Device Manager.For non-Windows operating systems, follow the instructions provided by your operating system toidentify a hardware device such as a wireless LAN (WLAN) network device.Regulatory markings for your country or region may be located on the bottom of the product, eitherunder the battery, under a user-removable door (or some other user-accessible location), or on thewireless or modem module.To view the FCC IDs for any radio modules in your notebook (Bluetooth®, WLAN, or WWAN), followthese steps:1. Turn on or restart the computer, and then press esc while the "Press the ESC key for StartupMenu" message is displayed at the bottom of the screen.2. Press f10 to enter BIOS Setup.3. Select the System Configuration menu.The FCC IDs are displayed at the bottom of the screen.CAUTION: Devices not for sale or use in the United States may not have an FCC ID.1

Federal Communications Commission noticeThis equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses, and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interferencewill not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:●Reorient or relocate the receiving antenna.●Increase the separation between the equipment and receiver.●Connect the equipment to an outlet on a circuit different from that to which the receiver isconnected.●Consult the dealer or an experienced radio or television technician for help.ModificationsThe FCC requires the user to be notified that any changes or modifications made to this device thatare not expressly approved by HP may void the user's authority to operate the equipment.CablesTo maintain compliance with FCC Rules and Regulations, connections to this device must be madewith shielded cables having metallic RFI/EMI connector hoods.2 Chapter 1 Regulatory notices

Brazil noticeEste equipamento opera em caráter secundário, isto é, não tem direito a proteção contrainterferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência asistemas operando em caráter primário.Este equipamento atende aos limites de Taxa de Absorção Específica referente à exposição acampos elétricos, magnéticos e eletromagnéticos de radiofreqüências adotados pela ANATEL.Canada noticesThis Class B digital apparatus meets all requirements of the Canadian Interference-CausingEquipment Regulations. If this device has WLAN or Bluetooth capability, the device complies withIndustry Canada licence-exempt RSS standard(s). Operation is subject to the following twoconditions: (1) this device may not cause interference, and (2) this device must accept anyinterference, including interference that may cause undesired operation of the device.CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due toits operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to beused indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmfulinterference to co-channel mobile satellite systems. High-power radar is allocated as the primary userof the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interferencewith and/or damage to this device.The antennas for this device are not replaceable. Any attempt at user access will damage yourcomputer.Avis CanadienCet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matérielbrouilleur du Canada.European Union Regulatory noticesProducts bearing the CE marking comply with the following EU Directives:●Low Voltage Directive 2006/95/EC●EMC Directive 2004/108/EC●Ecodesign Directive 2009/125/EC where applicableCE compliance of this product is valid if powered with the correct CE-marked AC adapter provided byHP.If this product has wired and/or wireless telecommunications functionality, it also complies with theessential requirements of EU Directive R&TTE Directive 1999/5/EC.Compliance with these directives implies conformity to applicable harmonized European standards(European Norms) that are listed in the EU Declaration of Conformity issued by HP for this product orproduct family and available (in English only) either within the product documentation or at thefollowing Web site: www.hp.eu/certificates (type the product number in the search box).The compliance is indicated by one of the following conformity markings placed on the product:4 Chapter 1 Regulatory notices

For non-telecommunications products and for EU harmonized telecommunications products, such asBluetooth®, within power class below 10 mW.For EU non-harmonized telecommunications products (if applicable, a 4-digit notified body number isinserted between CE and ! (the exclamation mark).Please refer to the regulatory label provided on the product.The telecommunications functionality of this product may be used in the following EU and EFTAcountries: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg,Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden,Switzerland, and United Kingdom.The telephone connector (not available for all products) is intended for connection to analogtelephone networks.NOTE: For products with wireless LAN devices, some countries may have specific obligations orspecial requirements about the operation of wireless LAN networks such as indoor use only orrestrictions of the channels available. Be sure that the country settings of the wireless network arecorrect.In France, certain restrictions apply for the 2.4-GHz wireless LAN operation of this product. Thisproduct may be used indoors for the entire 2400-MHz to 2483.5-MHz frequency band (channels 1 to13). For outdoor use, only the 2400-MHz to 2454-MHz frequency band (channels 1 to 7) may beused. For the latest requirements, see http://www.arcep.fr.The point of contact for regulatory matters is Hewlett-Packard GmbH, Dept./MS: HQ-TRE,Herrenberger Strasse 140, 71034 Boeblingen, GERMANY.Products with HP Mobile Broadband ModulesTHIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO FREQUENCYRADIATION.The HP Mobile Broadband Module in your notebook is a radio transmitter and receiver. The device isdesigned not to exceed the limits for exposure to radio frequency (RF) recommended by internationalguidelines (ICNIRP). These limits are part of comprehensive guidelines that establish permitted levelsof RF radiation for the general population. The guidelines were developed by independent scientificorganizations through periodic and thorough evaluation of scientific studies. The device also meetsthe European R&TTE directives, including the protection of the health and the safety of the user andany other person.The exposure standard for mobile devices employs a unit of measurement known as the SpecificAbsorption Rate (SAR).* The SAR was obtained by testing the device at standard operating positionsEuropean Union Regulatory notices 5

with the device transmitting at its highest certified power level in all tested frequency bands. Theactual SAR of the device while operating can be well below the maximum value, because the deviceoperates at multiple power levels and uses only the power required to reach the network.When installed in the notebook computer, this device meets RF exposure guidelines when theantennas are positioned at a minimum distance from the body. In order to transmit data or messages,this device requires a quality connection to the network. In some cases, transmission of data ormessages may be delayed until such a connection becomes available. Be sure that therecommended distance is observed until the transmission is complete.*The non-FCC, international guidelines state that the SAR limit for mobile devices used by the publicis 2.0 watts/kilogram (W/kg) averaged over 10 grams of body tissue. The guidelines incorporate asubstantial margin of safety to give additional protection for the public and to account for anyvariations in measurements. SAR values may vary depending on national reporting requirements andthe network band.This equipment incorporates a radio transmitting device. In normal use, a separation distance of 20cm ensures that radio frequency exposure levels comply with the Australian and New ZealandStandards.Ergonomics noticeGermanyMobile computers bearing the "GS" approval mark meet the ergonomic requirements and are suitableonly for short-time use of VDU tasks. When a mobile computer is used for display work tasks wherethe Visual Display Unit (VDU) Directive 90/270/EEC is applicable, an adequate external keyboard isrequired. Depending on the application and task, an adequate external monitor may also benecessary to attain working conditions comparable to a workstation setup.Ref: EK1-ITB 2000:2008This device is intended for use at visual display workplaces in compliance with BildscharbV, only withexternal keyboard and adequate external monitor.During mobile use with disadvantageous illumination conditions (e.g. direct sun light) reflections mayoccur which result in reduced readability.Mobile Computer, welche das "GS" Zeichen tragen, entsprechen den ergonomischen Anforderungenund sind nur für kurzzeitige Benutzung von Bildschirmarbeitsaufgaben geeignet. Wird ein mobilerComputer für Bildschirmarbeitsaufgaben verwendet, wo die Richtlinie 90/270/EEG(Bildschirmarbeitsrichtlinie) anzuwenden ist, wird eine geeignete externe Tastatur notwendig.Abhängig von der Anwendung und der Aufgabe kann ein geeigneter externer Monitor erforderlichsein, um vergleichbare Arbeitsbedingungen zu einem stationären Arbeitsplatz zu erreichen.Ref: EK1-ITB 2000:2008Das Gerät ist für die Benutzung am Bildschirmarbeitsplatz gemäß BildscharbV nur mit externerTastatur und geeignetem Monitor vorgesehen.Bei mobiler Nutzung mit ungünstigen Lichtverhältnissen (z.B. direkte Sonneneinstrahlung) kann es zuReflexionen und damit zu Einschränkungen der Lesbarkeit der dargestellten Zeichen kommen.6 Chapter 1 Regulatory notices

Japan noticesWireless LAN 802.11b devicesWireless LAN 802.11g devicesBluetooth devicesJapan notices 7

Wireless LAN, Wireless WAN, and Bluetooth certification markingsThis product contains certified radio equipment.South Korea noticeMexico noticeLa operación de este equipo está sujeta a las siguientes dos condiciones: (1) este equipo puede queno cause interferencia y (2) este equipo debe aceptar cualquier interferencia, incluyendo interferenciaque pueda ser causada por la operación no deseada.Singapore wireless noticeTurn off any WWAN devices while you are onboard aircraft. The use of these devices onboard aircraftis illegal, may be dangerous to the operation of the aircraft, and may disrupt the cellular network.Failure to observe this instruction may lead to suspension or denial of cellular services to theoffender, or legal action, or both.Users are reminded to restrict the use of radio equipment in fuel depots, chemical plants, and whereblasting operations are in progress.As with other mobile radio transmitting equipment, users are advised that for satisfactory operation ofthe equipment and for the safety of personnel, no part of the human body should be allowed to cometoo close to the antennas during operation of the equipment.This device has been designed to comply with applicable requirements for exposure to radio waves,based on scientific guidelines that include margins intended to assure the safety of all people,regardless of health and age. These radio wave exposure guidelines employ a unit of measurementknown as the specific absorption rate (SAR). Tests for SAR are conducted using standardizedmethods, with the phone transmitting at its highest certified power level in all used frequency bands.The SAR data information is based on CENELEC's standards EN50360 and EN50361, which use thelimit of 2 watts per kilogram, averaged over 10 grams of tissue.Thailand WWAN wireless noticeThis telecom equipment has complied with NTC regulations.8 Chapter 1 Regulatory notices

Taiwan noticesWireless LAN 802.11a devicesWireless LAN 802.11b devicesVietnam Compliance Marking NoticeThis marking is for applicable products only.Taiwan notices 9

Laser complianceWARNING! Use of controls or adjustments, or performance of procedures other than thosespecified in the laser product installation guide, may result in hazardous radiation exposure. Toreduce the risk of exposure to hazardous radiation:Do not try to open the module enclosure. There are no user-serviceable components inside.Do not operate controls, make adjustments, or perform procedures to the laser device other thanthose specified in the laser product installation guide.Allow only authorized service providers to repair the unit.This product may be provided with an optical storage device (for example, a CD or DVD drive) and/ora fiber optic transceiver. Each of these devices that contain a laser is classified as a Class 1 LaserProduct in accordance with IEC 60825-1 and meets the requirements for safety of that standard. Each laser product complies with US FDA regulations of 21 CFR 1040.10 and 1040.11 or complieswith those regulations except for deviations pursuant to Laser Notice No. 50 dated June 24, 2007.Modem noticesWARNING! To reduce the risk of fire, electric shock, and injury to persons when using this device,always follow basic safety precautions, including the following:Do not use this product near water—for example, near a bathtub, wash bowl, kitchen sink or laundrytub, in a wet basement, or near a swimming pool.Avoid using this product during an electrical storm. There is a remote risk of electric shock fromlightning.Do not use this product to report a gas leak while in the vicinity of the leak.Always disconnect the modem cable before opening the equipment enclosure or touching anuninsulated modem cable, jack, or internal component.If this product was not provided with a telephone line cord, use only No. 26 AWG or largertelecommunication line cord.Do not plug a modem or telephone cable into the RJ-45 (network) jack.SAVE THESE INSTRUCTIONSTelecommunications device approvalsThe telecommunications device in the computer is approved for connection to the telephone networkin the countries and regions whose approval markings are indicated on the product label located onthe bottom of the computer or on the modem.Refer to the user guide included with the product to ensure that the product is configured for thecountry or region in which the product is located. Selecting a country or region other than the one inwhich it is located may cause the modem to be configured in a way that violates thetelecommunication regulations/laws of that country or region. In addition, the modem may not functionproperly if the correct country or region selection is not made. If, when you select a country or region,a message appears that states that the country or region is not supported, this means that themodem has not been approved for use in this country or region and thus should not be used.Laser compliance 11

U.S. modem statementsThis equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA.On the bottom of the computer or on the modem is a label that contains, among other information, aproduct identifier in the format US:AAAEQ##TXXXX. Provide this information to the telephonecompany if you are requested to do so.Applicable certification jack USOC = RJ11C. A plug and jack used to connect this equipment to thepremises wiring and telephone network must comply with the applicable FCC Part 68 rules andrequirements adopted by the ACTA. A compliant telephone cord and modular plug is provided withthis product. It is designed to be connected to a compatible modular jack that is also compliant. Seeinstallation instructions for details.The REN is used to determine the number of devices that may be connected to a telephone line.Excessive RENs on a telephone line may result in the devices not ringing in response to an incomingcall. In most but not all locations, the sum of RENs should not exceed five (5.0). To be certain of thenumber of devices that may be connected to a line, as determined by the total RENs, contact thelocal telephone company. For products approved after July 23, 2001, the REN for this product is partof the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## arethe REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separatelyshown on the label.If this HP equipment causes harm to the telephone network, the telephone company will notify you inadvance that temporary discontinuance of service may be required. But, if advance notice isn'tpractical, the telephone company will notify you as soon as possible. Also, you will be advised of yourright to file a complaint with the FCC if you believe it is necessary.The telephone company may make changes to its facilities, equipment, operations, or proceduresthat could affect the operation of the equipment. If this happens, the telephone company will provideadvance notice in order for you to make necessary modifications to maintain uninterrupted telephoneservice.If trouble is experienced with this equipment, call technical support. If the equipment is causing harmto the telephone network, the telephone company may request that you disconnect the equipmentuntil the problem is resolved. You should perform repairs only to the equipment specifically discussedin the “Troubleshooting” section of the user guide, if one is provided.Connection to party line service is subject to state tariffs. Contact the state public utility commission,public service commission, or corporation commission for information.If your home has specially wired alarm equipment connected to the telephone line, ensure that theinstallation of this HP equipment does not disable your alarm equipment. If you have questions aboutwhat will disable alarm equipment, consult your telephone company or a qualified installer.The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computeror other electronic device, including a fax machine, to send any message unless such messageclearly contains in a margin at the top or bottom of each transmitted page, or on the first page of thetransmission, the date and time it is sent and an identification of the business, other entity, or otherindividual sending the message, and the telephone number of the sending machine or such business,other entity, or individual. (The telephone number provided may not be a 900 number or any othernumber for which charges exceed local or long-distance transmission charges).In order to program this information into your fax machine, you should complete the steps outlined inthe faxing software instructions.U.S. modem declarationsRefer to the following modem vendor declarations for the modem device installed in your computer:12 Chapter 1 Regulatory notices

Modem notices 13

14 Chapter 1 Regulatory notices

Canada modem statementsThis equipment meets the applicable Industry Canada technical specifications.The Ringer Equivalence Number, REN, is an indication of the maximum number of devices allowed tobe connected to a telephone interface. The termination on an interface may consist of anycombination of devices, subject only to the requirement that the sum of the RENs of all devices doesnot exceed 5. The REN for this terminal equipment is 1.0.Japan modem statementsIf the computer does not have the Japanese certification mark on the bottom of the computer, refer tothe appropriate certification marking below.The Japanese certification mark for the V.92 56K Data/Fax Modem is below:New Zealand modem statementsThe grant of a Telepermit for any item of terminal equipment indicates only that Telecom hasaccepted that the item complies with minimum conditions for connection to its network. It indicates noendorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, itprovides no assurance that any item will work correctly in all respects with another item ofTelepermitted equipment of a different make or model, nor does it imply that any product iscompatible with all of Telecom's network services.This equipment is not capable, under all operating conditions, of correct operation at the higherspeeds for which it is designed. Telecom will accept no responsibility should difficulties arise in suchcircumstances.If this device is equipped with pulse dialing, note that there is no guarantee that Telecom lines willalways continue to support pulse dialing.Use of pulse dialing, when this equipment is connected to the same line as other equipment, maygive rise to bell tinkle or noise and may also cause a false answer condition. Should such problemsoccur, the user should not contact the Telecom Faults Service.Some parameters required for compliance with Telecom's Telepermit requirements are dependent onthe equipment (PC) associated with this device. The associated equipment shall be set to operatewithin the following limits for compliance with Telecom's Specifications:a. There shall be no more than 10 call attempts to the same number within any 30-minute periodfor any single manual call initiation.b. The equipment shall go on-hook for a period of not less than 30 seconds between the end ofone attempt and the beginning of the next attempt.c. Where automatic calls are made to different numbers, the equipment shall be set to go on-hookfor a period of not less than 5 seconds between the end of one attempt and the beginning of thenext attempt.d. The equipment shall be set to ensure that calls are answered between 3 and 30 seconds ofreceipt of ringing (So set between 2 and 10).Modem notices 15

Voice supportAll persons using this device for recording telephone conversations shall comply with New Zealandlaw. This requires that at least one party to the conversation is aware that it is being recorded. Inaddition, the Principles enumerated in the Privacy Act 1993 shall be complied with in respect to thenature of the personal information collected, the purpose for its collection, how it is to be used, andwhat is disclosed to any other party.This equipment shall not be set to make automatic calls to the Telecom ‘111' Emergency Service.Power cord noticeIf you were not provided with a power cord for the computer or for an external power accessoryintended for use with the computer, you should purchase a power cord that is approved for use inyour country or region.The power cord must be rated for the product and for the voltage and current marked on the product'selectrical ratings label. The voltage and current rating of the cord should be greater than the voltageand current rating marked on the product. In addition, the diameter of the wire must be a minimum of0.75 mm²/18AWG, and the length of the cord must be between 1.5 m (5 ft) and 2 m (6½ ft). If youhave questions about the type of power cord to use, contact your authorized service provider.A power cord should be routed so that it is not likely to be walked on or pinched by items placed uponit or against it. Particular attention should be paid to the plug, electrical outlet, and the point where thecord exits from the product.Japan power cord noticeDC plug of external HP power supplyNOTE: This product is designed for IT power systems in Norway with phase-to-phase voltage notexceeding 240 V rms.NOTE: The computer operating voltage and current can be found on the system regulatory label.Macrovision Corporation noticeThis product incorporates copyright protection technology that is protected by method claims ofcertain U.S. patents and other intellectual property rights owned by Macrovision Corporation andother rights owners. Use of this copyright protection technology must be authorized by MacrovisionCorporation and is intended for home and other limited viewing uses only, unless otherwiseauthorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.16 Chapter 1 Regulatory notices

2 Safety noticesHeat-related safety warning noticeWARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do notplace the computer directly on your lap or obstruct the computer air vents. Use the computer only ona hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a softsurface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter tocontact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computerand the AC adapter comply with the user-accessible surface temperature limits defined by theInternational Standard for Safety of Information Technology Equipment (IEC 60950).Potential safety conditions noticeIf you notice any of the following conditions (or if you have other safety concerns), do not use thecomputer: crackling, hissing, or popping sound, or a strong odor or smoke coming from the computer.It is normal for these conditions to appear when an internal electronic component fails in a safe andcontrolled manner. However, these conditions may also indicate a potential safety issue. Do notassume it is a safe failure. Turn off the computer, disconnect it from its power source, and contacttechnical support for assistance.Battery noticesWARNING! To reduce the risk of fire or burns, do not disassemble, crush, or puncture; do not shortexternal contacts; do not dispose of in fire or water.WARNING! Keep the battery away from children.WARNING! To reduce potential safety issues, only the battery provided with the computer, areplacement battery provided by HP, or a compatible battery purchased as an accessory from HPshould be used with the computer.Headset and earphone volume level noticeWARNING! Listening to music at high volume levels and for extended durations can damage one’shearing. To reduce the risk of hearing damage, lower the volume to a safe, comfortable level andreduce the amount of time listening at high levels.For your own safety, before using headsets or earphones, always reset the volume. Someheadphones are louder than other headphones, even if the volume control setting is the same.Changing the default audio or equalizer settings might lead to higher volume and should only be donewith caution.For your own safety, headsets or earphones used with this product should comply with theheadphone limits in EN 50332-2.If the computer includes a headset or earphones, this combination is in compliance to EN 50332-1.Heat-related safety warning notice 17

Power cord noticesWARNING! To reduce the risk of electric shock or damage to the equipment:Plug the power cord into an AC outlet that is easily accessible at all times.Disconnect power from the computer by unplugging the power cord from the AC outlet (not byunplugging the power cord from the computer).If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter.The grounding pin is an important safety feature.WARNING! To reduce potential safety issues, only the AC adapter provided with the computer, areplacement AC adapter provided by HP, or an AC adapter purchased as an accessory from HPshould be used with the computer.Cleaning the keyboardWARNING! To reduce the risk of electric shock or damage to internal components, do not use avacuum cleaner attachment to clean the keyboard. A vacuum cleaner can deposit household debrison the keyboard surface. Clean the keyboard regularly to prevent keys from sticking and to removedust, lint, and particles that can become trapped beneath the keys. A can of compressed air with astraw extension can be used to blow air around and under the keys to loosen and remove debris.Travel noticeWARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not attempt topower the computer with a voltage converter kit sold for appliances.Norway and Sweden: Cable grounding notice forproducts with a TV tunerCAUTION: To reduce potential safety issues, use a galvanic isolator when connecting to a cabledistribution system.18 Chapter 2 Safety notices

3 Environmental noticesThis chapter provides country- and region-specific environmental notices and compliance information.Some of these notices may not apply to your product.Electronic hardware and battery recyclingHP encourages customers to recycle used electronic hardware, HP original print cartridges, andrechargeable batteries. For more information about recycling programs, see the HP Web site athttp://www.hp.com/recycle.Disposal of waste equipment by users in privatehouseholds in the European UnionThis symbol means do not dispose of your product with your other household waste. Instead, youshould protect human health and the environment by handing over your waste equipment to adesignated collection point for the recycling of waste electrical and electronic equipment. For moreinformation, please contact your household waste disposal service.Chemical substancesHP is committed to providing our customers with information about the chemical substances in ourproducts as needed to comply with legal requirements such as REACH (Regulation EC No1907/2006 of the European Parliament and the Council). A chemical information report for thisproduct can be found at http://www.hp.com/go/reach.Electronic hardware and battery recycling 19

China material content declarationsThe Table of Toxic and Hazardous Substances/Elements and their ContentAs required by China's Management Methods for Controlling Pollution by Electronic InformationProducts Toxic and Hazardous Substances and ElementsPart NameLead(Pb)Mercury(Hg)Cadmium(Cd)HexavalentChromium(Cr(VI))Polybrominatedbiphenyls (PBB)Polybrominateddiphenyl ethers(PBDE)Battery X O O O O OCables X O O O O OCamera X O O O O OChassis/Other X O O O O OFlash memory card reader X O O O O OFloppy disk drive X O O O O OHard disk drive X O O O O OHeadphones X O O O O OI/O PCAs X O O O O OKeyboard X O O O O O20 Chapter 3 Environmental notices

Toxic and Hazardous Substances and ElementsPart NameLead(Pb)Mercury(Hg)Cadmium(Cd)HexavalentChromium(Cr(VI))Polybrominatedbiphenyls (PBB)Polybrominateddiphenyl ethers(PBDE)Liquid crystal display(LCD) panelXX O O O OMedia (CD/DVD/floppy) O O O O O OMemory X O O O O OMotherboard, processor,heat sinksXO O O O OMouse X O O O O OOptical disk drive X O O O O OOptional docking device X O O O O OPower adapter X O O O O OPower supply X O O O O ORemote control X O O O O OSmart card/Java™ cardreaderXO O O O OSpeakers, external X O O O O OTV tuner X O O O O OUSB flash memory drive X O O O O OUSB hub X O O O O OWeb camera X O O O O OWireless receiver X O O O O OWireless cards X O O O O OO: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below thelimit requirement in SJ/T11363-2006.X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this partis above the limit requirement in SJ/T11363-2006.All parts named in this table with an X are in compliance with the European Union's RoHS Legislation “Directive 2002/95/ECof the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardoussubstances in electrical and electronic equipment” and its amendments.NOTE: The referenced Environmental Protection Use Period Marking was determined according to normal operating useconditions of the product such as temperature and humidity.China material content declarations 21

Japan material content declarationA Japanese regulatory requirement, defined by specification JIS C 0950, 2008, mandates thatmanufacturers provide material content declarations for certain categories of electronic productsoffered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, seethe HP Web site at http://www.hp.com/go/jisc0950.Turkey EEE regulationIn Conformity with the EEE regulationEEE Yönetmeliğine Uygundur22 Chapter 3 Environmental notices

Ukraine Restriction of Hazardous SubstancesThe equipment complies with requirements of the Technical Regulation, approved by the Resolutionof Cabinet of Ministry of Ukraine as of December 3, 2008 № 1057, in terms of restrictions for the useof certain dangerous substances in electrical and electronic equipment.Україна обмеження на наявність небезпечних речовинОбладнання відповідає вимогам Технічного регламенту щодо обмеження використання деякихнебезпечних речовин в електричному та електронному обладнані, затвердженого постановоюКабінету Міністрів України від 3 грудня 2008 № 1057.United States mercury disposalThis HP product contains the following materials that might require special handling at end-of-life:●Mercury in the fluorescent lamp in the display LCDDisposal of mercury can be regulated because of environmental considerations. For disposal orrecycling information, please contact your local authorities or the Electronic Industries Alliance (EIA)http://www.eiae.org.NOTE: Notebook computers configured with LED backlights do not contain mercury lamps.Perchlorate material—special handling may applySee http://www.dtsc.ca.gov/hazardouswaste/perchlorate.This product’s real-time clock battery or coin cell battery may contain perchlorate and may requirespecial handling when recycled or disposed of in California. Ukraine Restriction of Hazardous Substances 23

IndexAairline travel notice 10Bbattery notice 10, 17, 23battery recycling 19Brazil notice 4Ccable grounding notice 18Canada modem statement 15Canada notices 4Canadian French notices 4China Material ContentDeclarations 20DDC plug of external HP powersupply notice 16Declaration of Conformity 3disposal noticesbattery 10, 23equipment 19mercury 23Eelectronic hardware and batteryrecycling 19ENERGY STAR compliance 10environmental notices 19equipment disposal notice 19ergonomics notice 6European Union notices 4FFederal CommunicationsCommissioncables 2modifications 2notice 2GGS Notice 6Hhardware device, identifying 1headset and earphone volumelevel notice 17JJapan material contentdeclaration 22Japan modem statement 15Japan notice 7Japan power cord notice 16Kkeyboard notice 18Llaser safety notice 11MMacrovision Corporation notice16mercury disposal notice 23Mexico wireless notice 8modem notices 11modem statementsCanada 15Japan 15New Zealand 15U.S. 12modifications, FederalCommunications Commission 2NNew Zealand modem statement15noticesairline travel 10battery 10, 17, 23Brazil 4Canada 4Canadian French 4DC plug of external HP powersupply 16environmental 19equipment disposal 19ergonomics 6European Union 4Federal CommunicationsCommission 2headset and earphone volumelevel 17Japan 7Japan power cord 16keyboard 18laser safety 11Macrovision Corporation 16mercury disposal 23Mexico 8modem 11perchlorate material 23power cords 16, 18Singapore 8South Korea 8Taiwan 9Thailand WWAN wirelessnotice 8travel 18Ukraine restriction of hazardoussubstances 23Vietnam compliance marking9Ppower cord notice 16, 18Rrecycling, electronic hardware andbattery 19SSingapore wireless notice 8South Korea notice 8TTaiwan notice 9Thailand WWAN wireless notice8travel notice 18TV tuner, cable grounding notice1824 Index

UU.S. modem statement 12Ukraine restriction of hazardoussubstances notice 23VVietnam compliance markingnotice 9voice support 16volume level notice, headset andearphone 17Wwireless LAN devices 3Index 25

Navigation menu