Radicom Research WIFIHU2S USB WiFi Module User Manual Earthworks Legal and Regulartory Guide
Radicom Research Inc USB WiFi Module Earthworks Legal and Regulartory Guide
Contents
- 1. User Manual(Installation guide)
- 2. Users manual for host v4
Users manual for host v4
![](/img.php?id=3419052&img=bg1.png)
Legal and Regulatory Guide
Trimble® Earthworks
Version 1.00
Revision A
April 2017
![](/img.php?id=3419052&img=bg2.png)
Earthworks Legal and Regulatory Guide |
2
Contents
1
END USER LICENSE AGREEMENT
3
2
Copyright Information
9
3 Compliance notices 11
3.1
US FCC regulations
11
3.2
Canadian license-exempt RSS standards
11
3.2.1
CAN ICES-3 (B)/NMB-3(B)
12
3.3
European Union CE compliance
12
3.4
European Union recycling compliance
13
3.5
Australian and New Zealand AS/NZS 55022 compliance
13
3.6
Japan Radio Type Approval
13
3.7
RoHS Statement
13
3.8
Taiwan
13
3.9
Taiwan – Battery Recycling Requirements
14
4
Safety information
15
4.1
Laser Safety
16
4.2
Magnet Safety
16
4.3
Crushing prevention and cutting prevention
16
4.4
Operation
17
4.5
Exposure to radio frequency (RF) signals
18
4.5.1
Exposure to radio frequency radiation from Bluetooth and WLAN transmitters
18
4.5.2
Exposure to radio frequency radiation from cellular wireless transmitters
19
4.6
Telecommunications & Internet Association (TIA) information
19
4.7
Warnings
20
Earthworks Legal and Regulatory Guide |
3
1
END USER LICENSE AGREEMENT
IMPORTANT, READ CAREFULLY. THIS END USER LICENSE AGREEMENT ("AGREEMENT") IS A
LEGAL AGREEMENT BETWEEN YOU AND TRIMBLE INC. (“Trimble”) and applies to the
computer software provided by Trimble with Earthworks (the “Product”) purchased by you
(whether built into hardware circuitry as firmware, embedded in flash memory or a
PCMCIA card, or stored on magnetic or other media), or provided as a stand-alone
computer software product, and includes any accompanying printed materials and any
"online" or electronic documentation ("Software"). The Software also includes any software,
(including, without limitation, upgrades and updates) relating to the Product that is
furnished by Trimble or its dealers (including, without limitation, Trimble software
d
o
w
n
l
oa
d
e
d
f
r
om
T
r
i
m
b
l
e
’
s
o
r
it
s
d
ea
l
e
r
s
’
w
e
b
s
it
e
(
s
))
un
l
e
ss
a
cc
om
p
a
n
i
e
d
b
y
d
i
ff
e
r
e
n
t
license terms and conditions that will govern its use. BY CLICKING “YES” OR “I ACCEPT” IN
THE ACCEPTANCE BOX, OR BY INSTALLING, COPYING OR OTHERWISE USING THE
SOFTWARE, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT. IF YOU DO
NOT AGREE TO THE TERMS OF THIS AGREEMENT, DO NOT USE THE PRODUCT OR THE
SOFTWARE. INSTEAD PROMPTLY RETURN THE UNUSED PRODUCT OR SOFTWARE TO THE
PLACE FROM WHICH YOU OBTAINED THEM FOR A FULL REFUND. This Software is
protected by copyright laws and international copyright treaties, as well as other
intellectual property laws and treaties. The software is licensed, not sold.
1.
– SOFTWARE PRODUCT LICENSE
1.1
– License Grant. Subject to this Agreement, Trimble grants you a limited, non-exclusive,
non-sublicensable right to use one (1) copy of the Software in a machine-readable form on
the Product. Such use is limited to use with the Product for which it was intended and into
which it was embedded. You may use the installation Software from a computer solely to
download the Software to one Product. In no event shall the installation Software be used
to download the Software onto more than one Product without securing a separate
license. A license for the Software may not be shared or used concurrently on different
computers or Products.
1.2
- Other Rights and Limitations. (1) You may not copy, modify, make derivative works of,
rent, lease, sell, distribute or transfer the Software, in whole or in part, except as otherwise
expressly authorized under this Agreement, and you agree to use all commercially
reasonable efforts to prevent its unauthorized use and disclosure. (2) The Software
contains valuable trade secrets proprietary to Trimble and its licensors. To the extent
permitted by relevant law, you shall not, nor allow any third party to copy, decompile,
Earthworks Legal and Regulatory Guide |
4
1 END USER LICENSE AGREEMENT
disassemble or otherwise reverse engineer the Software, or attempt to do so, provided,
however, that to the extent any applicable mandatory laws (such as, for example, national
laws implementing EC Directive 91/250 on the Legal Protection of Computer Programs)
give you the right to perform any of the aforementioned activities without Trimble's
consent in order to gain certain information about the Software for purposes specified in
the respective statutes (i.e., interoperability), you hereby agree that, before exercising any
such rights, you shall first request such information from Trimble in writing detailing the
purpose for which you need the information. Only if and after Trimble, at its sole discretion,
partly or completely denies your request, may you exercise such statutory rights. (3) This
Software is licensed as a single product. You may not separate its component parts for use
on more than one Product. (4) You may not rent, lease, or lend, the Software separate
from the Product for which it was intended. (5) No service bureau work, multiple-user
license or time-sharing arrangement is permitted. For purposes of this Agreement "service
bureau work" shall be deemed to include, without limitation, use of the Software to
process or to generate output data for the benefit of, or for purposes of rendering
services to any third party over the Internet or other communications network. (6) You
may permanently transfer all of your rights under this Agreement only as part of a
permanent sale or transfer of the Product for which it was intended, provided you retain
no copies, you transfer all of the Software (including all component parts, the media and
printed materials, any upgrades, and this Agreement) and the recipient agrees to the terms
of this Agreement, if the Software portion is an upgrade, any transfer must include all prior
versions of the Software. (7) You acknowledge that the Software and underlying technology
may be subject to the export administration regulations of the United States Government
relating to the export of technical data and products. This Agreement is subject to, and you
agree to comply with, any laws, regulations, orders or other restrictions on the export of
the Software from the United States which may be imposed by the United States
Government or agencies thereof. (8) At the request of Trimble, you agree to cooperate with
Trimble to track the number of Products using Software at your site(s) to ensure
compliance with the license grant and installation restrictions in this Agreement. (9)
Notwithstanding anything to the contrary in this Agreement, any Open Source Software
that may be included as a part of the software package shall not constitute a portion of the
Software as defined in this Agreement and is not licensed under the terms of this
Agreement, but instead is subject to the terms of the applicable Open Source Software
license. If required, Trimble has provided the license or notice statement for the applicable
Open Source Software and such license or notice statement is accessible through the user
interface for the Product. Unless otherwise required pursuant to the terms of an Open
Source Software license, Trimble grants you no right to receive source code to the Open
Source Software; however, in some cases rights and access to source code may be
available to you directly from the licensors. If you are entitled to receive the source code
from Trimble for any Open Source Software included with the software package, you may
obtain the source code at no charge by written request to Trimble at 5475 Kellenburger
Rd., Dayton, Ohio 45424 USA, Attn: Earthworks Products Manager. You must agree to the
terms of the applicable Open Source Software license, or you may not use the subject
Open Source Software. For purposes of this Agreement, “Open Source Software” means
Earthworks Legal and Regulatory Guide |
5
1 END USER LICENSE AGREEMENT
those software programs or libraries that are identified in the software documentation,
read me and/or about files as being subject to any open source software license, and all
modifications, derivative works and executables based on or derived from such software
programs or libraries, if such modifications, derivative works and/or executables are also
subject to the applicable open source software license by its terms. (10) Use of both the
Product and Software is subject to the terms of user manuals, technical manuals and any
other materials provided by Trimble, or their licensors and/or suppliers, in printed,
electronic or other form, that describe the installation, operation, use or technical
specifications of the Product and/or Software (the “Documentation”). Without limiting the
generality of the foregoing, the Documentation shall include the installation manual (a copy
of which is viewable at https://community.trimble.com/community/partners/cec). The
Documentation and the terms in it are hereby incorporated into this Agreement by
reference. By installing and/or using the Product or Software, you hereby certify that you
have reviewed the Documentation, have received the necessary notice of the terms
contained in it, and agree to be bound by it.
1.3
– Termination. You may terminate this Agreement by ceasing all use of the Software.
Without prejudice as to any other rights, Trimble may terminate this Agreement without
notice if you fail to comply with the terms and conditions of this Agreement. In either event,
you must destroy all copies of the Software and all of its component parts, and provide an
affidavit to Trimble stating that you have done the same.
1.4
– Copyright. All title and copyrights in and to the Software (including but not limited to
any images, photographs, animations, video, audio, music, and text incorporated into the
Software), the accompanying printed materials, and any copies of the Software are owned
by Trimble and its licensors. You shall not remove, cover or alter any of Trimble's patent,
copyright or trademark notices placed upon, embedded in or displayed by the Software or
on its packaging and related materials. You may, however, either (1) make one copy of the
Software solely for backup or archival purposes, or (2) install the Software on a single
computer provided you keep the original solely for backup or archival purposes. You may
not copy the accompanying printed materials.
1.5
– U.S. Government Restricted Rights. Use, duplication, or disclosure by the United
States Government is subject to restrictions as set forth in this Agreement, and as
provided in DFARS 227.7202-l(a) and 227.7202-3(a) (1995), DFARS 252.227-7013(c)(1)(ii) (OCT
1988), FAR 12.212(a) (1995), FAR 52.227-19, or FAR 52.227-14(alt III), as applicable.
2.
– LIMITED WARRANTY.
2.1
- Limited Warranty. Trimble warrants that the Software will perform substantially in
accordance with the accompanying written materials for a period of one (1) year from the
date of receipt. This limited warranty gives you specific legal rights, you may have others,
which vary from state/jurisdiction to state/jurisdiction.
2.2
-
C
u
s
t
ome
r
Reme
d
i
e
s
.
T
r
i
m
b
l
e
'
s
a
n
d
it
s
li
c
e
n
s
o
r
s
’
e
n
ti
r
e
li
a
b
ilit
y
,
a
n
d
y
o
ur
s
o
l
e
r
eme
d
y
,
with respect to the Software shall be either, at Trimble 's option, (a) repair or replacement
of the Software, or (b) return of the license fee paid for any Software that does not meet
Trimble 's limited warranty. This limited warranty is void if failure of the Software has
resulted from (1) accident, abuse, or misapplication; (2) alteration or modification of the
Earthworks Legal and Regulatory Guide |
6
1 END USER LICENSE AGREEMENT
S
o
f
t
w
a
r
e
w
it
h
o
u
t
T
r
i
m
b
l
e
’
s
p
r
i
o
r
w
r
itt
e
n
a
u
t
h
o
r
i
z
a
ti
o
n
;
(
3
)
i
n
t
e
r
a
c
ti
o
n
w
it
h
s
o
f
t
w
a
r
e
o
r
hardware not supplied by Trimble; (4) improper, inadequate or unauthorized installation,
maintenance, or storage of the Software or Product; or (5) if you violate the terms of this
Agreement. Any replacement Software will be warranted for the remainder of the original
warranty period or thirty (30) days, whichever is longer.
2.3
– NO OTHER WARRANTIES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE
LAW, TRIMBLE AND ITS LICENSORS DISCLAIM ALL OTHER WARRANTIES AND CONDITIONS,
EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, IMPLIED WARRANTIES
AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
TITLE, AND NONINFRINGEMENT WITH REGARD TO THE SOFTWARE AND THE PROVISION
OF OR FAILURE TO PROVIDE SUPPORT SERVICES. THE ABOVE LIMITED WARRANTY DOES
NOT APPLY TO ERROR CORRECTIONS, UPDATES OR UPGRADES OF THE SOFTWARE AFTER
EXPIRATION OF THE LIMITED WARRANTY PERIOD, WHICH ARE PROVIDED “AS IS” AND
WITHOUT WARRANTY. BECAUSE THE SOFTWARE IS INHERENTLY COMPLEX AND MAY NOT
BE COMPLETELY FREE OF NONCONFORMITIES, DEFECTS OR ERRORS, YOU ARE ADVISED
TO VERIFY YOUR WORK. TRIMBLE DOES NOT WARRANT THE RESULTS OBTAINED
THROUGH USE OF THE SOFTWARE, OR THAT THE SOFTWARE WILL OPERATE ERROR FREE
OR UNINTERRUPTED, WILL MEET YOUR NEEDS OR EXPECTATIONS, OR THAT ALL
NONCONFORMITIES CAN OR WILL BE CORRECTED. TO THE EXTENT ALLOWED BY
APPLICABLE LAW, IMPLIED WARRANTIES AND CONDITIONS ON THE SOFTWARE ARE
LIMITED TO ONE (1) YEAR. YOU MAY HAVE OTHER LEGAL RIGHTS WHICH VARY FROM
STATE/JURISDICTION TO STATE/JURISDICTION.
2.4
– LIMITATION OF LIABILITY. TRIMBLE'S ENTIRE LIABILITY UNDER ANY PROVISION OF
THIS AGREEMENT SHALL BE LIMITED TO THE GREATER OF THE AMOUNT PAID BY YOU
FOR THE SOFTWARE LICENSE OR U.S. $25.00. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, IN NO EVENT SHALL TRIMBLE OR ITS LICENSORS BE LIABLE FOR ANY
SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES WHATSOEVER
(INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY
LOSS) ARISING OUT OF THE USE OR INABILITY TO USE THE SOFTWARE, OR THE PROVISION
OF OR FAILURE TO PROVIDE SUPPORT SERVICES, EVEN IF TRIMBLE HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME STATES AND JURISDICTIONS DO
NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THE
LIMITATIONS SET FORTH IN SECTION 2.4 SHALL APPLY EVEN IF THE LICENSEE'S REMEDIES
UNDER THIS AGREEMENT FAIL OF THEIR ESSENTIAL PURPOSE
3
– GENERAL.
3.1
– This Agreement shall be governed by the laws of the State of Ohio and applicable
United States Federal law without reference to "conflict of laws" principles or provisions.
The United Nations Convention on Contracts for the International Sale of Goods will not
apply to this Agreement. Jurisdiction and venue of any dispute or court action arising from
or related to this Agreement or the Software shall lie exclusively in or be transferred to the
courts located in Montgomery County, Ohio, and/or the United States District Courts for
Earthworks Legal and Regulatory Guide |
7
1 END USER LICENSE AGREEMENT
Ohio. You hereby consent and agree not to contest, such jurisdiction, venue and
governing law.
3.2
- Notwithstanding Section 3.1, if you acquired the Product in Canada, this Agreement is
governed by the laws of the Province of Ontario, Canada. In such case each of the parties
to this Agreement irrevocably attorns to the jurisdiction of the courts of the Province of
Ontario and further agrees to commence any litigation that may arise under this
Agreement in the courts located in the Judicial District of York, Province of Ontario.
3.3
- Official Language. The official language of this Agreement and of any documents
relating thereto is English. For purposes of interpretation, or in the event of a conflict
between English and versions of this Agreement or related documents in any other
language, the English language version shall be controlling.
3.4
- Trimble reserves all rights not expressly granted by this Agreement. 2017© , Trimble
Inc. All Rights Reserved.
7341424.3
Earthworks Legal and Regulatory Guide |
8
Earthworks Legal and Regulatory Guide |
9
2
Copyright Information
© 2016 – 2017, Trimble Incorporated. All rights reserved.
Trimble and the Globe & Triangle logo are trademarks of Trimble Incorporated, registered
in the United States and in other countries.
CMR and CMR+ are trademarks of Trimble Incorporated.
Android is a trademark of Google Inc.
Wi-Fi, WPA and WPA2 are trademarks of the Wi-Fi Alliance, registered in the United States
and other countries. Developed under a License of the European Union and the European
Space Agency.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of
such marks by Trimble Incorporated is under license.
All other trademarks are the property of their respective owners.
Earthworks Legal and Regulatory Guide |
10
![](/img.php?id=3419052&img=bgb.png)
3
Compliance notices
3.1 US FCC regulations
Thefollowingstatementappliestothesedevices:
l EC520‐Welectroniccontrolmodule(FCCID:K7T‐WIFIHU2S)
l TD520display(FCCID:TLZ‐NM230NF)
l GS520gradesensorl AA510audiblealarml CI510CANinterface
Note:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClass
Bdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsaredesignedto
providereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.
Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnot
installedandusedinaccordancewiththeinstructions,maycauseharmfulinterferenceto
radiocommunications.Changesormodificationsnotexpresslyapprovedbytheparty
responsibleforcompliancemightalsovoidtheuser'sauthoritytooperatetheequipment.
However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.
Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,which
canbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotryto
correcttheinterferencebyoneormoreofthefollowingmeasures:
l Reorientorrelocatethereceivingantenna.
l Increasetheseparationbetweentheequipmentandreceiver.
L Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthe
receiverisconnected.
l Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwo
conditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustaccept
anyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.
3.2 Canadian license-exempt RSS standards
Thefollowingstatementappliestothesedevices:
L EC520‐Welectroniccontrolmodule(IC:2377A‐WIFIHU2S)
l TD520display(IC:6100A‐NM230NF)
l GS520gradesensor
![](/img.php?id=3419052&img=bgc.png)
Earthworks Legal and Regulatory Guide |
12
3 Compliance notices
l
AA510 audible alarm
l
CI510 CAN interface
3.2.1
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions:
1.
This device may not cause interference, and;
2.
This device must accept any interference, including interference that may cause
undesired operation of the device.
Cet appareil est conforme avec Industrie Canada RSS standard exempts de licence (s). Son
fonctionnement est soumis aux deux conditions suivantes:
1.
Cet appareil ne peut pas provoquer d'interférences; et
2.
Cet appareil doit accepter toute interférence, y compris les interférences pouvant
entraîner un mauvais fonctionnement de la appareil.
3.3
European Union CE compliance
The following statement applies to these devices:
l
EC520-W electronic control module
l
TD520 display
l
GS520 grade sensor
l
AA510 audible alram
l
CI510 CAN interface
These devices are compliant with the following Directives and standards
l
Machinery 2006/42/EC
l
RoHS 2011/65/EU
l
ISO 13766:2006
l
ISO 13309:2010
The EC520-W electronic control module and the TD520 display are also compliant with
the following additional Directives and standards:
l
Radio Equipment Directive 24/53/EU
l
IETSI EN 300-328 V2.1.1
l
ETSI EN 301-489-1 V2.1.0
l
ETSI EN 301-489-17 V3.1.1
![](/img.php?id=3419052&img=bgd.png)
Earthworks Legal and Regulatory Guide |
13
3 Compliance notices
3.4
European Union recycling compliance
These products comply with the WEEE Directive 2012/19/EU. For recycling in Europe
call:
+31 479 53 24 30
To request instructions by writing:
Trimble Europe BV
C/O Menlo Worldwide Logistics
Meerheide 45
5521 CZ Eersel, NL
3.5
Australian and New Zealand AS/NZS 55022 compliance
AS/NZS 55022 compliance applies to these devices:
l
EC520-W electronic control module
l
TD520 display
l
GS520 grade sensor
l
AA510 audible alarm
l
CI510 CAN interface
3.6
J
a
p
a
n
R
a
d
i
o
T
y
p
e
A
pp
r
o
va
l
Construction Design Certificates apply to these devices:
l
EC520-W electronic control module (208-160089, R - 201-16379 and T- D 160
253
201)
l
TD520 display (R - 201-16379 and T- D 160 253 201)
3.7
RoHS Statement
This device conforms to RoHS (Reduction Of Hazardous Sub-stances)
European Union regulations that set maximum concentration limits on
hazardous materials used in electrical and electronic equipment.
CAUTION: RISK OF EXPLOSION IF BATTERY IS DISPOSED OF INCORRECTLY. DISPOSE OF
THE DEVICE AND THE BATTERY ACCORDING TO INSTRUCTIONS FOR ELECTRONIC WASTE.
3.8
Taiwan
低功率電波輻射性電機管理辦法
第十二條: 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。
第十四條: 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。低功率射頻電機需忍受合法
通信或工業、科學及醫療用電波輻射性電機設備之干擾。
SAR 標準值2.0W/Kg,送測產品實測值為0.545w/Kg
![](/img.php?id=3419052&img=bge.png)
Earthworks Legal and Regulatory Guide |
14
3 Compliance notices
3.9
Taiwan – Battery Recycling Requirements
The product contains a removable Lithium-ion battery. Taiwanese regulations require
that waste batteries are recycled.
廢電池請回收
![](/img.php?id=3419052&img=bgf.png)
Earthworks Legal and Regulatory Guide |
15
4
Safety information
Most accidents that involve product operation, maintenance and repair are caused by
failure to observe basic safety rules or precautions. An accident can often be avoided by
recognizing potentially hazardous situations before an accident occurs. A person must be
alert to potential hazards. This person should also have the necessary training, skills and
tools to perform these functions properly.
Improper operation, lubrication, maintenance or repair of this product can be dangerous
and could result in injury or death.
Do not operate or perform any lubrication, maintenance or repair on this product, until
you have read and understood the operation, lubrication, maintenance and repair
information.
Safety precautions and warnings are provided in this manual and on the product. If these
hazard warnings are not heeded, bodily injury or death could occur to you or to other
persons.
The hazards are identified by the “Safety Alert Symbol” and followed by a “Signal Word” such
as “DANGER”, “WARNING” or “CAUTION”. The Safety Alert “WARNING” label is shown below.
WARNING — This alert warns of a potential hazard which, if not avoided, can cause severe injury.
The meaning of this safety alert symbol is as follows:
Attention! Become Alert! Your Safety is Involved.
The message that appears under the warning explains the hazard and can be either
written or pictorially presented.
Operations that may cause product damage are identified by “NOTICE” labels on the
product and in this publication.
Trimble cannot anticipate every possible circumstance that might involve a potential
hazard. The warnings in this publication and on the product are, therefore, not all inclusive.
If a tool, procedure, work method or operating technique that is not specifically
recommended by Trimble is used, you must satisfy yourself that it is safe for you and for
others. You should also ensure that the product will not be damaged or be made unsafe by
the operation, lubrication, maintenance or repair procedures that you choose.
Earthworks Legal and Regulatory Guide |
16
4 Safety information
The information, specifications, and illustrations in this publication are on the basis of
information that was available at the time that the publication was written. The
specifications, torques, pressures, measurements, adjustments, illustrations, and other
items can change at any time. These changes can affect the service that is given to the
product. Obtain the complete and most current information before you start any job.
Dealers have the most current information available.
4.1
Laser Safety
As with any bright light source, such as the sun, electric welding arcs or arc lamps, common
sense applies:
l
DO NOT look into the laser aperture when the laser is on.
l
Viewing laser output with telescopic optical instruments (for example, telescopes
and binoculars) may pose an eye hazard.
l
Do not remove any warning signs from the laser.
l
Use of a laser transmitter by personnel that are not trained on the product may
result in exposure to hazardous laser light.
For further information regarding safe use of lasers, refer to the IEC 60825-1 2007, or the
ma
nu
f
a
c
t
ur
e
r
’
s
d
o
cu
me
n
t
a
ti
o
n
s
u
pp
li
e
d
w
it
h
y
o
ur
l
a
s
e
r
t
r
a
n
s
m
itt
e
r
.
4.2
Magnet Safety
The neodymium magnets supplied with the magnetic display mount are very strong.
Handling them with care is necessary to prevent personal injuries, and property damage:
l
Pacemakers may be damaged or switch to "Test Mode" in the presence of a strong
magnetic force. If a pacemaker is in use, keep a minimum of 30 cm (1 foot) distance.
l
Be extremely careful when handling the magnets near other magnets or ferrous
metal. Losing control of a magnet may result in damage to intervening objects, such
as a finger or a cab window.
l
Do not remove any warning signs from the magnets.
l
The strong magnetic fields of the magnets can damage electronic devices such as
hearing aids, items that rely on magnetic storage media such as credit cards, bank
cards, and computers, and items containing ferromagnetic components such as
mechanical watches.
4.3
Crushing prevention and cutting prevention
Support the equipment properly when you work beneath the equipment. Do not depend
on the hydraulic cylinders to hold up the equipment. An attachment can fall if a control is
moved, or if a hydraulic line breaks.
Unless you are instructed otherwise, never attempt adjustments while the machine is
moving. Also, never attempt adjustments while the engine is running.
Earthworks Legal and Regulatory Guide |
17
4 Safety information
Whenever there are attachment control linkages, the clearance in the linkage area will
increase or the clearance in the linkage area will decrease with movement of the
attachment. Stay clear of all rotating and moving parts.
Keep objects away from moving fan blades. The fan blade will throw objects or cut objects.
Do not use a kinked wire cable or a frayed wire cable. Wear gloves when you handle wire
cable.
When you strike a retainer pin with force, the retainer pin can fly out. The loose retainer pin
can injure personnel. Make sure that the area is clear of people when you strike a retainer
pin. In order to avoid injury to your eyes, wear protective glasses when you strike a retainer
pin.
Chips or other debris can fly off objects when you strike the objects. Make sure that no one
can be injured by flying debris before striking any object.
4.4
Operation
Clear all personnel from the machine and from the area.
Clear all obstacles from the machine's path. Beware of hazards (wires, ditches, etc).
Be sure that all windows are clean.
Secure the doors and the windows in the open position or in the shut position.
Adjust the rear mirrors (if equipped) for the best visibility close to the machine.
Make sure that the horn, the travel alarm (if equipped), and all other warning devices are
working properly.
Fasten the seat belt securely.
Warm up the engine and the hydraulic oil before operating the machine.
Only operate the machine while you are in a seat.
The seat belt must be fastened while you operate the machine. Only operate the controls
while the engine is running.
While you operate the machine slowly in an open area, check for proper operation of all
controls and all protective devices. Before you move the machine, you must make sure
that no one will be endangered.
Do not allow riders on the machine unless the machine has the following equipment:
l
Additional seat
l
Additional seat belt
l
Rollover Protective Structure (ROPS)
Note any needed repairs during machine operation. Report any needed repairs.
Avoid any conditions that can lead to tipping the machine. The machine can tip when you
work on hills, on banks and on slopes. Also, the machine can tip when you cross ditches,
ridges or other unexpected obstructions.
Earthworks Legal and Regulatory Guide |
18
4 Safety information
Avoid operating the machine across the slope. When possible, operate the machine up the
slopes and down the slopes.
Maintain control of the machine.
Do not overload the machine beyond the machine capacity.
Be sure that the hitches and the towing devices are adequate.
Never straddle a wire cable. Never allow other personnel to straddle a wire cable.
Before you maneuver the machine, make sure that no personnel are between the
machine and the trailing equipment.
Always keep the Rollover Protective Structure (ROPS) installed during machine operation.
Monitor the location of mounted components. Ensure that the components do not come
into contact with other parts of the machine during operation.
4.5
Exposure to radio frequency (RF) signals
This system uses devices that contain radio transmitters and receivers. The radiated
output power is far below the international radio frequency exposure limits. These limits
are part of comprehensive guidelines and establish permitted levels of RF energy for the
general population. The guidelines are based on the safety standards previously set by
international standards bodies:
l
American National Standards Institute (ANSI) IEEE. C95.1-1992.
l
National Council on Radiation Protection and Measurement (NCRP). Report 86. 1986.
l
Int’l Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996.
l
Ministry of Health (Canada), Safety Code 6. The standards include a substantial safety
margin designed to assure the safety of all persons, regardless of age and health.
Use of unauthorized or modified antennas may impair signal quality and damage a device,
causing loss of performance. To assure optimal performance, and ensure human
exposure to RF energy is within the guidelines set forth in the relevant standards, always
use a device in its normal-use position.
Maintain a minimum 20cm distance from radio transmitters when hey are in use. Avoiding
contact with the antenna area when a device is IN USE optimizes the antenna
performance.
4.5.1
Exposure to radio frequency radiation from Bluetooth and WLAN
transmitters
Devices are approved as a portable devices with respect to Radio Frequency (RF) exposure
compliance. The radiated output power of the internal wireless radio transmitters is less
than 100 milliwatt, which results in exposure levels far below the FCC radio frequency
exposure limits, even when operated in close proximity to the body. The internal wireless
radios operate within guidelines found in international radio frequency safety standards
and recommendations, which reflect the consensus of the international scientific
community. Trimble therefore believes the internal wireless radios are safe for use by
Earthworks Legal and Regulatory Guide |
19
4 Safety information
users. The level of electromagnetic energy emitted is hundreds of times lower than the
electromagnetic energy emitted by wireless devices such as mobile phones. However, the
use of wireless radios may be restricted in some situations or environments, such as on
aircraft. If you are unsure of restrictions, you are encouraged to ask for authorization
before turning on the wireless radios.
4.5.2
Exposure to radio frequency radiation from cellular wireless
transmitters
Devices equipped with wireless cellular modem radios have been designed and
manufactured to meet safety requirements for limiting exposure to radio waves. When
used in accordance with the instructions set forth in this manual, the equipment has been
independently verified to not exceed the emission limits for safe exposure to radio
frequency (RF) energy as specified by the Federal Communications Commission of the U.S.
Government in 47 CFR §2.1093. These limits are part of comprehensive guidelines and
establish permitted levels of RF energy for the general population. The guidelines are
based on standards that were developed by independent scientific organization through
periodic and thorough evaluation of scientific studies. The standards include a substantial
safety margin designed to assure the safety of all persons, regardless of age and health.
4.6
Telecommunications & Internet Association (TIA)
information
Hearing Aids
: Some digital wireless phones may interfere with some hearing aids. In the
event of such interference, you may want to consult your wireless service provider, or call
customer service to discuss alternatives.
Pacemakers and Other Medical Devices
: The Health Industry Manufacturers Association
recommends a minimum separation of six inches be maintained between a handheld
wireless phone and a pacemaker to avoid potential interference with the pacemaker.
These recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research. Persons with pacemakers should use
the ear opposite the pacemaker to minimize the potential for interference. Persons with
pacemakers should exercise great caution if using a hands-free device such as a headset,
as these persons may be at greater risk of the device not maintaining the recommended
minimum six inches of separation from the pacemaker. If you have any reason to suspect
that interference is taking place, turn the device OFF immediately.
If you use any other personal medical device, consult the manufacturer of your device to
determine if they are adequately shielded from external RF energy. Your physician may be
able to assist you in obtaining this information.
Turn the device OFF in health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be using equipment that could
be sensitive to external RF energy.
![](/img.php?id=3419052&img=bg14.png)
4 Safety information
Earthworks Legal and Regulatory Guide |
20
4.7
Warnings
WARNING — When replacement parts are required for this product Trimble recommends using
Trimble replacement parts or parts with equivalent specifications including, but not limited to,
physical dimensions, type, strength and material. Failure to heed this warning can lead to
premature failures, product damage, personal injury or death.
WARNING — When transporting machines with removable sensors such as GNSS receivers or UTS
targets installed, if the sensor mounting bracket clamp loosens, then the sensor may be dislodged
from the machine which may result in injury or death. Always remove and store removable sensors
prior to transport.
WARNING — When removing or installing removable sensors such as GNSS receivers or UTS
targets, if the sensor is accessed improperly, then a fall may result in injury or death. Always follow
site, state or national Health and Safety guidelines when removing or installing removable sensors.
WARNING — The magnets on the magnetic display mount are strong. If parts of your hands get
between two magnets when you move them, the magnets may suddenly move and pinch or clamp
the skin. When the magnets are close together, position your hands so they are not between the two
magnets.
WARNING — If you have a pacemaker and handle the magnetic display mount, the magnet can
affect the function of the pacemaker and cause physical harm. Remain at least 30 cm (1 foot) from
the magnetic display mount if you have a pacemaker.
![](/img.php?id=3419052&img=bg15.png)
Notices
© 2016 – 2017, Trimble Incorporated. All rights reserved.
See https://community.trimble.com/community/partners/cec for terms and conditions.
See https://community.trimble.com/community/partners/cec for important safety
information.
See https://community.trimble.com/community/partners/cec for warranty and compliance
information.