RM Acquisition 1000AA TND Tablet User Manual manual

RM Acquisition LLC TND Tablet manual

manual

This portable transmitter with its antenna has shown compliance with FCC’s SAR limits for general population / uncontrolled exposure. The maximum listed SAR level is0.512W/kg. The antenna used for this device must not be co-located or operating in conjunction with any other antenna or transmitterB
TND™ Tablet User Manual iFCC Compliance StatementThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and may cause harmful interference to radio communications if not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and the receiver.•Connect the equipment into an outlet that is on a different circuitfrom the GPS unit.•Consult the dealer or an experienced radio/TV technician for help.IC Compliance StatementThis device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and2. This device must accept any interference, including interferencethat may cause undesired operation of the device.This Class B digital apparatus complies with Canadian ICES-003.IC CautionIntentional or unintentional changes or modifications to the equipment not expressly approved by Rand McNally could void the user’s authority to operate the equipment.IC attestation de conformitéCe dispositif est conforme à la norme FCC Partie 15 et aux norme(s) RSS permis-exempte(s) d’Industrie Canada. L’opération est soumise aux deux conditions suivantes: 3. Ce dispositif ne peut pas provoquer d’interférence nocive et4. Ce dispositif doit accepter toute interference reçue, y comprisles interférences qui peuvent causer un mauvais fonctionnementdu dispositif.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.Attention Les changements ou modifications à l’équipement, que ce soient intentionnelles ou non, non expressément approuvés par Rand McNally pourraient annuler l’autorisation de l’utilisateur à utiliser cet équipement.IC: 10199A-01001Aonnect the equipment into an outlet that is on a different circuit
TND™ Tablet User Manual iiAbout GPSThe Global Positioning System (GPS) is a constellation of satellites that a GPS receiver uses to calculate geographical positions. To determine a position, data from at least three satellites is required. To determine elevation, the data from four or more satellites is required. Accuracy of the positioning varies from 10 feet to several hundred feet, depending on vehicle placement and the surrounding environment.Geographical terrain (such as mountains), man-made structures (such as highway overpasses, bridges, and tall buildings), as well as weather can interfere with the GPS signal. For best GPS reception, position the device and mount with a clear line of sight to the sky. Some vehicles may have a limited view of the sky due to metal sun shields or a metallized windshield coating. Map data includes the geographical coordinates for address locations and points of interest (POIs). With GPS reception, your device calculates a route to your selected location.Customer Support Call toll-free: 800-333-0136 Service hours:Monday through Friday, 7 a.m. to 6 p.m. CT (Except official holidays) E-mail:TNDSupport@randmcnally.com
TND™ Tablet User Manual iiiTable of Contents1. Your Device ...................................................................................................... 1-3 Safety Information ................................................................................................... 1 What’s Included .................................................................................................... 2 Install the Mount ...................................................................................................... 2 TND™ Tablet hardware .............................................................................................. 3 2. Getting Started ..................................................................................................4-9 Connecting to Wi-Fi ................................................................................................ 4 Registration ......................................................................................................... 4 Using Android ......................................................................................................... 5 Settings ...................................................................................................... 6-8 Main Menu ......................................................................................................... 9 3. Truck GPS .................................................................................................. 10-57 A. Main Menu .....................................................................................................11 B. Settings ...................................................................................................12-18 Guide to Truck Tools and Device Preferences ..................................................... 12 Truck Info ....................................................................................................... 13 Warnings ....................................................................................................... 14 General Preferences ..................................................................................... 15-16 Route Preferences ............................................................................................. 17 Map Preferences ............................................................................................... 18 C. Destinations ............................................................................................... 19-38 Helpful Tips ....................................................................................................... 20 New Location ............................................................................................... 21-24 Address Book ............................................................................................... 25-26 Multi-Stop Trips ............................................................................................ 27-29 Tap Map ....................................................................................................... 30 Avoid List ....................................................................................................... 31 Points of Interest (POIs) ................................................................................ 32-35 Local Search ...................................................................................................... 36 Confirmation Windows ..................................................................................... 37 Toll Costs, Route Compare ................................................................................ 38 D. Maps & Routing ........................................................................................39-45 Route Map Window .......................................................................................... 39 Exits Quick View ................................................................................................ 40 Directions Slide-Out List ................................................................................... 41 Virtual Dashboard ........................................................................................ 42-43 Junction View, Turn View .................................................................................. 44 Location and Route Options .............................................................................. 45 E. Tools & Features .........................................................................................46-57 Weather ....................................................................................................... 46 Traffic .................................................................................................. 47-48 Fuel Prices ....................................................................................................... 49 Truck Tools ....................................................................................................... 50 Timers ....................................................................................................... 51 Mileage ....................................................................................................... 52 Trails ....................................................................................................... 53 Fu el Logs ....................................................................................................... 54 Quick Planner .................................................................................................. 55 Road Atlas Information ...................................................................................... 56 Calendar ....................................................................................................... 57 Notepad ....................................................................................................... 57 Unit Converter ................................................................................................... 57 Calculator ....................................................................................................... 57 F. Tell Rand ....................................................................................................... 58 4. TripMaker® ....................................................................................................... 59 5. Motor Carriers’ Road Atlas ................................................................................ 60 6. Dash Cam ....................................................................................................... 61 7. Preloaded Apps ................................................................................................... 62 8. Rand McNally Market .......................................................................................... 63 9. More Information ................................................................................................ 64
TND™ Tablet User Manual 1Caution: Important Safety Information Navigation • Use this device at your own risk. • Use this device only when it is safe to do so. • Look at the display only when it is safe to do so. • Traffic regulations always have priority over any instructions from the navigation system. • Follow navigation system instructions only when local regulations and road traffic allow you do so. • Make sure that the mount is securely mounted and properly adjusted before each trip. • Note: If you do not understand the spoken instructions or are unsure of what to do next, refer to the navigation map on your navigation device.Installation • Make sure that the mount does not impair the driver’s visibility. • Do not attach the mount within the airbag deployment zone. • When installing the mount, make sure that it does not pose a risk in the event of an accident. • Do not run cables directly next to safety-relevant devices and power supplies. • After installation, check all safety-relevant equipment. • Connect the wall charger to a 120V or 240V outlet only. • Connect the vehicle charger to a 12V outlet only.1. Your DeviceDevice • Do not use sharp-edged objects on the device touch screen. • The device is not waterproof and is not protected against water damage. • Protect the device from extreme temperatures. Operating temperature for the device is between 32 degrees F and 120 degrees F.• Do not open the navigation device casing. • Do not attempt to replace the battery. Contact Rand McNally Customer Support with questions about the battery.• Always follow local regulations when disposing of this device. • Note: Make sure that there are no kinks in the cable and that it will not be damaged by any sharp objects. • Note: Use only a moist cloth to clean the navigation device. • Note: Do not pull the cable to unplug the unit.
TND™ Tablet User Manual 2What’s Included Rand McNally TND™ Tablet• Two-piece mount: - Magnet with GPS boost - Bracket with suction cup• Quick Start Guide• Anti-glare screen protector• Vehicle charger• Wall charger• USB cable1. Your DeviceInstall the Mount Note: Follow all local regulations governing the placement of the mount. 1. Select an area with a line of sight to the sky and GPS satellites.2. Clean and dry the mounting area.3. Remove the suction cup protective film.4. Attach the two pieces of the mount together.5. Adjust the angle of the mount.6. Pull the suction cup lever up to release suction.7. Plug the power cord into the mount and the vehicle’s 12-volt power source.8. Place and hold the mount suction cup against the mounting surface.9. Press the suction cup lever down until it snaps into place.10. Snap the tablet onto the mount.11. Adjust the tablet so that it can be easily seen and does not block the driver’s line of sight.
TND™ Tablet User Manual 31. Your DeviceMain MenuVolumeDown Up Power Dash camMini HDMI(video out)Micro USB(power)SD cardAudio outMicro USB(power)Video inTND™ Tablet Hardware
TND™ Tablet User Manual 42. Getting StartedConnecting to Wi-Fi When you first turn on your tablet, you’ll be asked to select a Wi-Fi network to connect to the Internet. A Wi-Fi connection is required to browse the web, download apps, and use Internet-enabled features such as weather and traffic. Choose your wireless access point or hotspot from the list and type in your password. Note: If you skip this step, you will not be able to use all the features of your tablet. The Truck GPS app, however, does not require a Wi-Fi connection.Registration In the next step, you’ll be prompted to register your tablet with Rand McNally. Your registration ensures that you have access to the latest information and updates, as well as customer support.
TND™ Tablet User Manual 52. Getting Started13Swipe down at leftto view notificationsSwipe down at rightto view settings 2 45687 9Using Android 1 GPS is on2 Wi-Fi is on3 Indicates remaining battery power4 Current time5 View installed apps6 Tap or swipe right to view second home screen7 Back8 Return to last home screen9 View open apps
TND™ Tablet User Manual 62. Getting StartedSettings Swipe down from the right to view quick settings:• Brightness• Wi-Fi – Shows available networks• Auto-rotation – Controls whether the screen rotates when you rotate the tablet• Battery power • Airplane mode – Turns off Wi-Fi and data transmission• Bluetooth – Pairs other devices• Location – Set mode (high accuracy recommended)• Screenshot – Saves an image of the current screen• Volume
TND™ Tablet User Manual 72. Getting StartedAll Settings Wireless and Networks• Wi-Fi – View and connect to available Wi-Fi networks.• Bluetooth – Pair with another device using Bluetooth.• Data usage – Monitor how much data has been used by different apps.Device• Home – Select a different launcher. This will change the home screen that appears when the tablet powers on.• Sound – Set volumes for different features and enable/disable sounds.• Display – Set brightness, wallpaper, and appearance.• Storage – View how much internal storage is available on your tablet.• Battery – View time spent on battery and battery power used by different apps.• Apps – View apps. Swipe right to view: downloaded, on SD card, running, all.
TND™ Tablet User Manual 82. Getting StartedAll Settings Personal• Location – View location mode, requests, and reporting. High accuracy mode is recommended.• Security – Enable screen security (each time the screen turns on) and encryption (each time the tablet powers on). Also view passwords, device administration, and credential storage.• Language & input – Set language and keyboard information, as well as speech options and pointer speed.• Backup & reset – Back up the data stored on your tablet.Accounts• Add accounts – Add your email or other accounts.System• Date & time – Set date and time, time zone, and clock format.• Accessibility – Enable spoken feedback to help blind and low-vision users.• Printing – Enable printing services.• About tablet – View network status and version numbers.
TND™ Tablet User Manual 92. Getting Started > Main Menu1 IntelliRoute® TND™ Main Menu (See page 11.) 2 TripMaker® Use the online planning tool to plan a trip with multiple via points and transfer it to the navigation app as a multi-stop trip. (See help available online.)3 Motor Carriers’ Road Atlas (See page 60.)4 Dash Cam (See page 61.)5 Fuel Manager (For assistance with Fuel Manager and all other apps, see help within each app.)The bottom three buttons on the home screen can be changed according to your preferences. (To replace with other apps, open the app tray by tapping the upper right corner of the screen. Select Rand McNally Launcher and Truck Widget settings. Tap a box and select a shortcut, or tap applications to view more. Tap Save.)123 4 5
TND™ Tablet User Manual 103. Truck GPSNotes on using the Truck GPS app: • When your tablet is attached to the magnetic mount, the GPS boost within the mount will provide accurate GPS location, even without a Wi-Fi connection. • Weather, traffic, fuel prices, and local search within the Truck GPS app require a Wi-Fi connection.• To exit the Truck GPS app at any time, swipe down from the top of the screen or up from the bottom to view the Android menu bars. Or tap the main menu button on the front of the device.
TND™ Tablet User Manual 113A. Truck GPS > Main MenuIntelliRoute® TND™ Main Menu1 Driver Info Switch between two driver profiles, for team driving. Turn team driving on in Preferences > General. (See page 15.)2 Load Option* Specify in Preferences whether the trailer is always loaded or whether you want to be prompted each time a route is calculated. (See page 15.) (Does not display if load option is set to Always Loaded.) 3 Driver Status* Select driver status. Note: Set Driver Status to Automatic to start/stop driving timers when the vehicle moves/stops. (See page 16). However, when the driver status is set to Automatic mode, tapping the driver status buttons on the Main Menu temporarily overrides the automatic setting.4 Truck Tools Select to enter truck information, set warnings, and access other tools. (See page 13.)5 Go To Map Tap to view location on the map. 6 Choose Destination Tap to select an address or point of interest (POI). 7 Preferences Tap to set device, route, or map options. (See page 12.)8 Mute/Unmute the Speaker Tap to mute or unmute spoken instructions. Note: You can also tap this icon when it appears on the map screen to mute/unmute. 9 Volume Tap to increase or decrease spoken instructions volume.*Note: Not available in Car Mode. 1 2 34 5 67 8 9
TND™ Tablet User Manual 123B. Settings Truck Tools PageTruck Info Hazmat Type ..........................................13 Height ..................................................13 Number of Axles ....................................13 Trailers ..................................................13 Truck ETA Adjustment ............................13 Weight (Empty) .....................................13 Weight (Loaded) ...................................13 Width ..................................................13Warnings Auto Dismiss Warnings ..........................14 Construction Area .................................14 State or Province Border/ Time Zone Change Warning ..........14 Curve Warnings .....................................14 Driving Day ............................................14 Driving Session .......................................14 Engine Brake Warnings ..........................14 Hill Warnings ........................................14 Narrow Road Warnings .........................14 On Duty Day .........................................14 On Duty Week ......................................14 Speed ..................................................14 Speed Limit Display ...............................14 State/Province Border Alert ...................14 Toll Booth Alert .....................................14 Warning/Alert Prompts .........................14 Warning Display Size .............................14 Weigh Station .......................................14General Align screen ..........................................16 Brightness .............................................15 Clock Setting ........................................16 Contact & About ...................................16 Day/Night Map Color ............................15 GPS Status ............................................16 Keyboard ..............................................16 Language ..............................................16 Load Option ..........................................16 Mileage Log ..........................................15 My Custom POIs ...................................15 Reset Truck Timers ................................15 Screen Click ..........................................16 Screen Snapshot Button .......................16 Shortcut Button ....................................16 Skin Style - Day .....................................15 Skin Style - Night ..................................15 Team Driving ..........................................15 Tutorial .................................................16 Units ..................................................16 Update Driver Status .............................15 Vehicle Type ..........................................15 Voice Name ..........................................16 Yard Time Zone .....................................15Route Cross-Country Borders ..........................17 Dirt Roads .............................................17 Fast Recalc ............................................17 Ferries ..................................................17 Freeways ...............................................17 Junction View Distance ..........................17 Manage Avoid List ................................17 Recalculation ........................................17 Route ..................................................17 Tollways ................................................17 Truck ETA Adjustment ........................... 17 Tunnels .................................................17 Turn Announcements ............................17 Turn View Distance ...............................17 U-Turns .................................................17Map Address Book Icons ...............................18 Bus Icon .................................................18 Car Icon ................................................18 Map Auto Zoom ...................................18 Map Style ..............................................18 POI Icons ...............................................18 Route Color ..........................................18 Truck Icon .............................................18 Truck POI Icons ......................................18 Device Preferences Page Device Preferences Page1. Tap and to view the options.2. Tap the option to be set.3. Enter the new information.4. Tap Back to save changes.
TND™ Tablet User Manual 133B. SettingsWidth Use the + and - buttons or enter a numeric value by tapping the calculator. Trailers Straight 48’ 53’ Double TripleETA Adjustment Increase ETA more Increase ETA some ETA ok Decrease ETA some Decrease ETA more Set adjustments to your ETA due to weather or traffic conditions. You can add (increase) time to make the trip take longer or subtract (decrease) time to make the trip take less time. Number of Axles Use the + and - buttons.Truck Info OptionsHazmat Type None Explosives Gases Flammable Liquids Flammable Solids Oxidizers Poison Radioactive Corrosives Other PIHWeight (Empty) Use the + and - buttons or enter a numeric value by tapping the calculator.Weight (Loaded) Use the + and - buttons or enter a numeric value by tapping the calculator. See Load Option in Preferences › General (page 15) or on the Main Menu (page 11). Height Use the + and - buttons or enter a numeric value by tapping the calculator.Truck Info Options
TND™ Tablet User Manual 143B. SettingsWarnings OptionsWarning/Alert Prompts None Audio & Visual Visual Audio Auto Dismiss Warnings Never After 10 seconds After 30 seconds Height and weight violations will not be auto dismissed.Warning Display Size Full screen Small bar Height and weight restrictions will always display in full screen.Curve Warnings Set warning distance to curves by using the + and - buttons.Hill Warnings Set warning distance to hills by using the + and - buttons.Engine Brake Warnings Set warning distance to locations where engine braking is prohibited by using the + and - buttonsNarrow Road Warnings Set warning distance to narrow roads by using the + and - buttons.Driving Session Set when to be warned before reaching the driving session limit.Driving Day Set when to be warned before reaching the driving hours limit.On Duty Day Set when to be warned before reaching the duty hours limit.On Duty Week Set when to be warned before reaching the duty week limit.Speed Limit Display None Truck only (limited) Show car (if no truck limit is available)State/ProvinceBorder Alert Set warning distance to state/province borders by using the + and - buttons.State or Province Border/ Timezone Change Off OnToll Booth Alert Set warning distance to toll booths by using the + and - buttons. Weigh Station Set warning distance to weigh stations by using the + and - buttons.Construction Area Set warning distance to construction areas by using the + and - buttons. Speed Set warning distance to speed limit changes by using the + and - buttons. Set the amount over the posted limit at which the warning appears. Set a user-defined maximum speed to be warned whenever the truck exceeds that speed, regardless of posted speed limits. Note: To turn warnings off completely, tap the - button until “off” displays. Warnings Options
TND™ Tablet User Manual 153B. SettingsGeneral Preferences OptionsSkin Style - Day Ice Carbon ClassicSkin Style - Night Ice Carbon ClassicVehicle Type Truck Car Bus Controls how routes are calculated. Note: Some tools and settings may not be available in car mode. Yard Time Zone Hawaii Alaska Pacific Time Arizona Mountain Time Central Time Eastern Time Indiana (East) Atlantic (Canada) NewfoundlandTeam Driving Turn team driving on and set profiles to keep separate driving timers for two team members.Day/Night Mode Always day Always night AutomaticBrightness Set separately for day and night modes.My Custom POIs Tap Manage Custom POIs to specify how custom POIs are displayed on the map: set image, warning distance, warning type, and street/city/state level map display. Tap the “x” to delete any set of POIs. (See page 32 for Custom POIs.) Update Driver Status Automatic Main Menu buttons Timers Inactive Specify how driver status is changed. Note: When in Automatic mode, tapping the driver status buttons on the Main Menu will temporarily override the automatic setting.Reset Truck Timers Automatic Manual Mileage Log Truck only Car only Truck & Car Don’t log mileage (See page 52 for mileage.) General Preferences Options
TND™ Tablet User Manual 163B. SettingsGeneral Preferences Options General Preferences OptionsLoad Option Prompt Always loaded Specify whether mileage should be calculated with the truck empty, always loaded, or whether to display a prompt for each route. When set to Prompt, each time you tap Begin New Route, a window displays asking if the truck is loaded or empty.Screen Click Click off Click onTutorial View on-device tutorialKeyboard ABC Computer (QWERTY)Voice Name Samantha Tom (English only) Claudia (No street names)Language English Español Français For the screen and spoken instructions.Units U.S. Standard Metric Auto SelectClock Setting 12-hour clock 24-hour clockScreen Snapshot Button Off OnShortcut Button Main Menu Go to Map The shortcut button appears in the bottom right corner of the screen.Align screen Calibrate the touch screen. Note: Select this option if your device seems to have buttons that are hard to tap.GPS Status Tap to show details about your location.Contact & About Tap to show version information and copyrights.
TND™ Tablet User Manual 173B. SettingsRoute Preferences Options Route Preferences OptionsNote: The default settings for your device are already optimized for truck routing. Use the options below to fine-tune these settings. A route may still include a roadway or maneuver set to Avoid if the only legal route found contains these types of roads or the route is over several hundred miles. Truck ETA Adjustment Increase ETA more (by 15%) Increase ETA some (by 5%) ETA ok Decrease ETA some (by 5%) Decrease ETA more (by 10%) Set adjustments to your ETA due to weather or traffic conditions. You can add (increase) time to make the trip take longer or subtract (decrease) time to make the trip take less time. Recalculation Manual recalculate Auto recalculateRoute Fastest route Shortest routeFreeways Allow all (default) Avoid freeways Prefer freeways Avoid small roadsTollways Allow tollways Avoid tollwaysU-Turns Allow u-turns Avoid u-turnsFerries Allow ferries Avoid ferriesCross-Country Borders Allow cross borders Avoid cross bordersDirt Roads Allow dirt roads Avoid dirt roadsTunnels Allow tunnels Avoid tunnelsManage Avoid List Roads States/Provinces Areas Routes To avoid a state or province select it from this list. Tap on the map and select a road, area, or route to add it to the Avoid List. Tap the x to remove. (See page 31.)Fast Recalc Off On Fast recalc calculates a route to a midpoint between your location and the destination, rather than recalculating the entire route from scratch. Best used on a long route that has short distances between intersections.Turn Announcements Set three distances at which you want to be warned about an upcoming turn. The first announcement will be the farthest from the turn and the third the closest to it.Turn View Distance Set the distance before the maneuver at which the local street turn view screen appears. (Note: In 3D map view, this warning is not needed and will be turned off.)Junction View Distance Set the distance before the maneuver at which the highway junction view screen appears.
TND™ Tablet User Manual 183B. SettingsMap Preferences OptionsMap Preferences OptionsMap Style Light Dark Map Auto Zoom Off On, auto scale On, street scale On, city scale On, state scale Set to auto scale to keep the current vehicle position and the next turn in the map view at all times. Set to street/city/state scale to specify the maximum scale of the zoom. Note: Map redraw speed is impacted by autozoom choice, especially when combined with 3D map display option. Turn it off for quicker display.POI Icons Off On Select icons to display on map Select restaurants, banks, and consumer POIs (“Other” category) to display on the map. Tap any category to fill in the square and display those icons.Truck POI Icons Off On Select icons to display on map Select travel centers, service, weigh stations and truck POIs to display on the map. Tap any category to fill in the square and display those icons.Address Book Icons Off On Address book entries appear as pushpin icons unless they are assigned to a group. Grouped entries appear as folders. (See page 26.)Truck Icon Use the arrows to select different icons to display when using the truck setting. Use the slider to change the color.Car Icon Use the arrows to select different icons to display when using the car setting. Use the slider to change the color.Bus Icon Use the arrows to select different icons to display when using the bus setting. Use the slider to change the color.Route Color Use the slider to select.
TND™ Tablet User Manual 19DestinationsTo access this window from the Main Menu, tap Choose Destination.1 Back Tap to return to the Main Menu. 2 New Location Tap to route to a new location by address, city center, intersection, or latitude/longitude. (See page 21.)3 History Tap to route to a recently entered location.4 Address Book Tap to view a list of saved locations. (See page 25.)5 Multi-Stop Trips Tap to view a list of saved multi-stop trips or to create a new one. (See page 27.)6 Points of Interest/POIs Tap to search for a point of interest (POI) such as a gas station, restaurant, etc. (See page 32.) Local Search Tap to search for local businesses, restaurants, and more by name or keyword. (Note: Wi-Fi connection required.) (See page 36.)3C. Destinations12 3 45 677
TND™ Tablet User Manual 20Helpful Tips on Entering AddressesAuto-Complete Feature:Enter the first few characters in a name and a short list displays a couple of names that start with the typed characters.On the keyboard, the only keys available are for the next valid characters in a search name.Continue entering characters until the searched-for name displays in the list. Tap on the name to select it.Cities: Some cities with common names such as “Athens” have several types of names associated with a city. If a name does not display, continue typing characters until the name you are looking for displays in the list.Streets: If the next letter in the street name can not be selected on the keyboard, tap Expand Search to search a greater area. The Expand Search button can also help locate addresses that may actually be in a different town, spelled slightly differently, or in a neighboring town.Note: If you’re entering a State or County Route, it’s typically best to first either enter the State or County initials (for example, State Road 535 would be entered as “SR”) but you may also need to try other options, such as “State Road” or “CA” for California, for example. 3C. Destinations Tap to view a longer list of names matching the typed characters. Tap to view a list of previously selected locations. Add a space. Delete last character and move back one space. Type an apostrophe, hyphen, or other symbol.
TND™ Tablet User Manual 21New Location1 Address Tap to route to an address by entering the city, street, and number, or by entering the zip code and street. (See page 22.)2 City Center Tap to route to a city center. (See page 23.)3 Intersection Tap to route to two intersecting roads in a city. (See page 23.)4 Back Tap to return to the previous window. 5 Enter Lat/Long Tap to route to a location by latitude and longitude. (See page 24.)6 Menu Tap to return to the Main Menu.3C. Destinations1 2 345 6
TND™ Tablet User Manual 22Search for an Address1. Tap Choose Destination > New Location > Address. 2. Type the first few characters in the city name. As you type, a short list of matching city names displays. 3. Tap on a city to select it.• If the city is not displayed on the short name list, continue typing characters in the city name or tap List to display a long list of city names. Use the up and down arrows to view all cities/states. Tap on a city to select it. Note: If a city name appears twice within a state, you may need to check both for your specific address. 4. Or tap Enter Zip Code. Type the zip code.5. Type the first few characters in the street name, or if the next characters of the street name cannot be selected on the keyboard, tap Expand Search and search a wider area.6. Tap on the street name from the displayed list. 7. Tap the house number or tap List to show a list of address ranges and select a range. Note: To enter the House Number before the street, tap this button in step 5. This preference will be saved for subsequent address entry.8. Tap on the street number range from the list. The Confirmation Window displays. (See page 37.)9. Tap Begin New Route to navigate to the location. 3C. Destinations > Addresses
TND™ Tablet User Manual 23Route to a City Center 1. Tap Choose Destination > New Location > City Center.2. Type the first few characters in the city name.3. Tap on the city/state name. The Confirmation Window displays. (See page 37.)4. Tap Begin New Route to navigate to the location.Route to an Intersection 5. Tap Choose Destination > New Location > Intersection.6. Type the first few characters in the city name.7. Tap on the city name.8. Type the first few characters in the primary street name, or if the next characters of the street name cannot be selected on the keyboard, tap Expand Search and search a wider area.9. Tap on the street name in the list. 10. Type the first few characters in the intersecting street name.11. Tap on the intersecting street name. The Confirmation Window displays. (See page 37.)12. Tap Begin New Route to navigate to the location.3C. Destinations > Addresses
TND™ Tablet User Manual 24Route to a Latitude/Longitude 1. Tap Choose Destination > New Location > Enter Lat/Long2. Tap in the Latitude field.3. Enter the latitude of the location and tap Enter.4. Tap in the Longitude field.5. Enter the longitude of the location and tap Enter.6. Tap Go. The Confirmation Window displays. (See page 37.)7. Tap Begin New Route to navigate to the location. Note: There are two ways to enter latitude/longitude: by decimal degrees or by degrees, minutes, and seconds. 3C. Destinations > Addresses
TND™ Tablet User Manual 25Address Book Add Locations to the Address Book from the Confirmation Window (See page 37.): 1. Tap Save to Address Book. 2. Tap Yes to accept the default name or tap No to display a keyboard.3. Type the name of the location and tap Enter to save the location in the Address Book. The Confirmation Window re-displays.Entries • Tap Choose Destination > Address Book. Entries are alphabetically sorted by Name.• To sort by Distance or Date, tap Sort By.• Use the up and down arrows to scroll through the list or use the alphabet buttons on the left.• Tap the Search field to search the Address Book by keyword.• The notepad icon indicates a note has been added for this location.Route to an Address Book Location 1. Tap Choose Destination > Address Book.• Tap on the All Addresses tab or• Tap on the Groups tab. 2. Tap on an address to select it. The Confirmation Window displays. (See page 37.)3. Tap Begin New Route to navigate to the location.3C. Destinations > Address Book
TND™ Tablet User Manual 26Create a Group1. Tap Choose Destination > Address Book. 2. Tap on the Groups tab.3. Tap New Group. 4. Type the group name.5. To select a different color folder, tap .6. Tap on a color, then tap Close.7. When finished, tap Enter. Tap on the next to a group to delete the group. Addresses will still be saved in the Address Book. Note: You can also choose to display address book icons on the map. (See page 18.) Add an Address to a Group1. Tap Choose Destination > Address Book.2. Tap the Groups tab.3. Tap on the group you want to add an address to.4. Tap New Location.5. Tap Enter New Address, History, Address Book, or POI.6. If you selected:• History, Saved, or POI, the selected location is added to the group.• Enter a New Address, tap Yes to accept the default name or tap No to display a keyboard and enter a new name. Remove an Address From a Group1. Tap Choose Destination > Address Book.2. Tap on the Group tab. 3. Tap on the Group you want to remove the address from.4. Tap on the next to the address to be removed. 5. Tap Yes. 3C. Destinations > Address Book
TND™ Tablet User Manual 27Create a Multi-Stop Trip1. Tap Choose Destination > Multi-Stop Trips.2. Tap New Trip. 3. Type the trip name.4. To select a different color folder, tap .5. Tap on a color, then tap Close.6. When finished, tap Enter. Note: A multi-stop trip can include up to 50 stops.Add a Stop Note: You can add locations in the order you want to route to them or reorder stops later (See page 28.) From the Main Menu: 1. Tap Choose Destination > Multi-Stop Trips. 2. Tap on the route. 3. Tap Add Address. 4. To add an address, tap Enter New Address, History, Address Book, or POI.5. A Confirmation Window asks if you want to add another stop. Tap:• Yes to add another stop• No if the route is complete.6. Tap Back to save changes.Remove a Stop 1. Tap Choose Destination > Multi-Stop Trips. 2. Tap on the route. 3. Tap on the next to the stop to be removed. 4. Tap Yes. 3C. Destinations > Multi-Stop Trips
TND™ Tablet User Manual 28Reorder Routes Optimize Automatically After all locations have been added to a multi-stop trip, you can run the optimizer wizard to organize your trip. 1. Tap Choose Destination > Multi-Stop Trips. 2. Tap on the route you want to optimize. 3. Tap Reorder Trip.4. Tap Automatic/Optimize. 5. Tap Select First Stop and select the first stop, or No Preference.6. Tap Select Last Stop and select the last stop, or No Preference.7. Tap Yes to return to your current location to complete the route or No to complete the route at the last stop.8. Tap Start Trip to begin the route. Note: There is a limit of ten stops that can be optimized automatically. Reorder a Route Manually1. Tap Choose Destination > Multi-Stop Trips. 2. Tap on the route you want to optimize. 3. Tap Reorder Trip. 4. Tap Manual. 5. Tap on the stop to be moved and tap the arrows to move stops up or down.6. When finished, tap OK. 7. Tap Start Trip to begin the route.3C. Destinations > Multi-Stop Trips
TND™ Tablet User Manual 29Select and Run a Saved Route 1. Tap Choose Destination > Multi-Stop Trips. 2. Tap on the route to select it. 3. Tap Start Trip. The Confirmation Window displays. (See page 37.)4. Tap Begin New Route to navigate to the location. 5. The IntelliRoute® TND™ calculates the route to your first stop. When you have reached the stop, a message displays. 6. Tap:• Next Stop - To calculate a route to the next stop in the route.• Skip Next Stop - To skip the next stop and calculate a route to the stop after the next one.• End Current Trip - To end the route at the current stop. Note: To view your entire trip, select Summary Map View from the Route Display Options. (See page 41.) Delete a Route1. Tap Choose Destination > Multi-Stop Trips. The Multi-Stop Trips window displays.2. Tap on the next to the route to be deleted.3. A confirmation message displays.4. Tap:• Yes to delete the route.• No to keep the route.3C. Destinations > Multi-Stop Trips
TND™ Tablet User Manual 30Tap on the Map When you tap on the map screen, the crosshairs display. 1 Add as Via Add a via—an interim stop between the origin and the destination.2 Avoid Tap to avoid the route, road, or area, or to detour. (See page 31.)3 Set Origin Set the location as the starting point of the route.4 Route to Here Tap Begin New Route to navigate to the location.5 Wi-Fi View live information at this location with a Wi-Fi connection. 3C. Destinations > Tap Map123 45
TND™ Tablet User Manual 313C. Destinations > Avoid ListAvoid List From the map, set specific locations to avoid. Tap on the map and select Permanent Avoid. Choose Avoid Route, Avoid Road, or Avoid Area. Or, if the location is along an active route, choose Detour. Avoid Route Choose whether to avoid an upcoming distance on an active route, in the left column, or a specific road section, in the right column. Or, select Avoid Entire Route. The route is recalculated and the avoided sections are added to the Avoid List, under Routes. Avoid Road Add the selected road segment to the Avoid List, under Roads. (Note: Reposition the map after zooming in or out to be sure to select the right location.) Road segments that have been permanently avoided are shown in pink on the map when zoomed in. Tap on a segment and tap Remove Avoid to remove the segment from the Avoid List. Detour Detour around a road segment on an active route. The route is recalculated, but the road segment is only avoided temporarily and does not appear on the Avoid List. To cancel the detour, tap the icon in the lower left-hand corner of the map screen and select Detour. (See page 45.) Avoid Area Set an area on the map to avoid. Increase/decrease the size of the area using the and buttons. Tap Save to add the area to the Avoid List, under Areas. Enter a name for the area. If an active route has been entered, the route does not recalculate. Avoided areas are shown on the map in pink.To remove items from the Avoid List, tap Manage Avoid List in Preferences > Route. Tap the to remove. Tap Roads in the Avoid List to view avoided roads on the map. You may need to re-enter your destination to recalculate an active route.Avoid OptionsAvoid RouteAvoid Area
TND™ Tablet User Manual 32Points of Interest (POIs)1 My Truck/Near Car Tap to search for a point of interest near the current vehicle location. 2 City Tap to search for a point of interest in a city.3 My Route Tap to search for a point of interest along the vehicle route.4 End of Day Tap to search for a point of interest along the last 30 minutes of your route. This search is based on your remaining driving hours in Truck Tools > Timers. (See page 51.) Note: Not available in Car mode. 5 Destination Tap to search for a point of interest near the route destination. 6 Back Tap to return to the previous window.7 Custom POI Tap to select a custom POI location.8 Main Menu Tap to return to the Main Menu.3C. Destinations > POIs1367 84 52
TND™ Tablet User Manual 33Points of Interest (POIs) 1 Travel Center Tap to search for a travel center with truck amenities. (See page 35 to filter by amenities.) 2 Truck Services Tap to search for a truck services POI. (See page 35 to filter by amenities.) 3 Parking & Rest Areas Tap to search for truck parking or a rest stop. 4 Weigh Station Tap to search for a truck weigh station. 5 CAT Scales Tap to search for a CAT scale location. 6 Dealers Tap to search for a truck dealership. 7 Other Categories Tap to select a consumer (non-truck) related point of interest. 8 Back Return to previous window. 3C. Destinations > POIs1 2 34 5 6 78
TND™ Tablet User Manual 34Other Categories1. Tap Choose Destination > Points of Interest.2. Select a search type (My Truck/My Car, City, My Route, End of Day, or Destination).3. Tap Other Categories.4. Tap on a category. (For example, tap Hospital/Emergency.)5. If necessary, tap on a subcategory type. (For example, tap Pharmacy.) 6. Tap on a location from the list or 7. Tap All.8. Tap on the Spell button to display the keyboard. 9. Type the first characters in the POI name.10. Tap on the POI name in the displayed list.3C. Destinations > POIs
TND™ Tablet User Manual 35Select and Filter Travel Center Amenities and Truck Services Truck-related Travel Center points of interest can include over 70 different types of amenities. To select only the travel centers with the amenities that you are interested in, filter your search results.1. Tap Choose Destination > Points of Interest.2. Select a search type (My Truck/My Car, City, My Route, End of Day, or Destination).3. Tap Travel Center or Truck Service.4. Tap Select Services.5. Click on the check box of each amenity to be included in the search.6. Tap OK. The Travel Center window displays POI locations with your selected amenities.7. Tap on a location from the list.8. A check next to Filter indicates the search terms have been applied. Tap Filter to return to general search results.Rate a Truck Point of Interest You can rate truck POIs from the Confirmation Window. (See page 37.) For each POI, the top row indicates the community rating from fellow drivers for the point of interest. The bottom row indicates your individual rating. 1. Tap on the POI Ratings button.2. Use and to rate the facility.3. Tap Create Comment and type a personal comment on the facility. 4. Tap Enter to save the comment. 5. Tap Back to save changes.3C. Destinations > POIs
TND™ Tablet User Manual 36Note: This feature requires a Wi-Fi connection. (See page 4.) Use Local Search to search the Internet for a restaurant, business, or any type of location by name, keyword, or category. Tap Choose Destination > Local Search.Choose whether to search: near your truck in a specific city near your destinationSelect a category, or tap Keywords to search using a specific name (e.g., “Subway”) or a keyword (“sandwich”). Tap Nearby Food to show a list of area restaurants based on your current location. Tap My Local History to show a list of previous searches.3C. Destinations > Local Search123451 2 34 5
TND™ Tablet User Manual 373C. Destinations > Confirmation WindowsConfirmation Windows 1 Destination Address The selected location address. Begin New Route Tap to route to destination. Compare Routes Tap to choose between two routes (See page 38.) Add as Via Add this location as an interim stop between the origin and destination. This automatically makes the current route a multi-stop trip. (See page 27.) Save to Address Book Add the location to the Address Book or add to Address Book group. (See page 25). Atlas Cross-reference to printed Rand McNally Motor Carriers’ Road Atlas. (Page numbers apply to the most recent Atlas.) Go to Map Tap to view this location on a map. Set Origin Tap to set the location as the starting point of a route. Menu Tap to return to the Main Menu. Details Tap to view phone number and amenities at this location. POI Rating Tap to rate or add a comment to this location. (See page 35.) Edit Entry Rename or edit this entry in the Address Book. Note Add a note about this location in the Address Book. Back Tap to return to previous window.Address BookNew Location 12Truck POI563414782345678910111213149Screens differ according to destination type:11 10125634147812 131256341478 9
TND™ Tablet User Manual 383C. Destinations > Toll Costs, Route CompareToll CostsFrom the destination confirmation screen, tap Begin New Route. If the calculated route includes tolls, a message appears. Use Current Route Show estimated toll costs and continue along the calculated route. Compare Routes Compare the calculated toll route to an alternate route without tolls. (See below.) Don’t Prompt for Tolls Use the current route and disable this prompt for subsequent route calculations. Note: You can re-enable this prompt in Preferences > General. (See page 15.)Route Compare1. From the destination confirmation window, tap Compare Routes to calculate and display two routes and choose between them.2. Choose to ignore tolls and calculate two routes based solely on route preferences, or to calculate a primary route (which may include tolls) and an alternate route without tolls.3. The top of the screen displays the total distance and time for each route, as well as any estimated toll costs. Zoom in to get a closer look at each route on the map.4. Tap either button at the top of the screen to select that route. If the route includes tolls, estimated toll cost will display.1321 32
TND™ Tablet User Manual 39City, county, and state Current street name Next intersecting street name Advanced lane guidance 9 Current Mile Marker Tap to open a “Tell Rand” message. 10 Current Information View current information by city, street, or upcoming intersection. Also displays advanced lane guidance and weather overlay key, when enabled. Tap to change. (Note: For some destinations, the “Am I close?” feature counts down addresses as the vehicle approaches.) 11 Location and Route Options Tap to see current location information, change route settings, detour, cancel a route, and manage avoided roads. (See page 45.) 12 Current Speed Tap to display the Virtual Dashboard. Turns red for speed warnings. (See page 42.) 13 Speed Limit Orange for truck limit; white for general limit. Tap to open a "Tell Rand" message about speed limits. 14 Map View Tab Tap to simplify the map screen. Icons are minimized to show simply the zoom, next maneuver, and miles/time. 15 Traffic Tap to view the Traffic window. (See page 47.) 16 Mute17 Wi-Fi Tap to access Wi-Fi connected features. 1 Next Maneuver Tap to repeat spoken next maneuver instructions. 2 Road Name Name of street you will turn onto next. 3 Miles/Time Displays remaining distance. Tap to select from: yard arrival time, arrival time, remaining time, yard time, and elevation. 4 Exits Quick View Slide out to show upcoming exit information. (See page 40.)5 Directions Slide-Out List Tap to select a route display option. (See page 41.) 6 Zoom In/Zoom Out 7 Main Menu8 Compass Direction Tap to change the map display. An icon in the upper right corner displays the selected option: North up (N), heading up (arrow), or 3D (3). Also displays Wi-Fi status.3D. Maps & Routing1 2 3131211 10 815 167654179Route Map Window1417
TND™ Tablet User Manual 403D. Maps & RoutingExits Quick ViewSlide out to show Points of Interest and amenities at upcoming exits. The list displays the distance to the next exit, exit name and number, and a count of available amenities. 1. Tap on an exit to bring up the list icon .2. Tap the icon to display locations by category.3. Tap on any item in the list to route to that location.
TND™ Tablet User Manual 413D. Maps & RoutingDirections Slide-Out List Route Display Options 1. When first opened, the slide-out list displays in Detail View showing each maneuver.2. Use and to view the instructions.3. To change the display option, tap Route Display Options. See Highway View, Trip Summary (for multi-stop trips), and Summary Map View at left. 1 Rise/Set Displays the times of sunrise and sunset for your current location.2 MPH Displays the current vehicle speed, in miles per hour.3 Distance, Time Displays remaining distance and time. 4 Distance Displays the distance for each road segment.5 Street/Road Name Displays the street name you will be on after performing the next maneuver. Tap on any item in the list to view it on the map and to detour around it if necessary. (Note: For multi-stop trips, highways in each leg are listed, color-coded by segment.)6 Total Distance and Time Total distance and time for the entire trip.7 Leg Number of the leg and distance.8 Leg Destination Leg destination.Trip Summary (for multi-stop trips)Highway View 1 2 345678Summary Map View (entire trip)6
TND™ Tablet User Manual 423D. Maps & RoutingVirtual Dashboard To show the Virtual Dashboard, tap the Current Speed. 1 Current direction of travel.2 Displays current times at the yard, current location and destination, as well as estimated time of arrival.3 Sunrise and sunset times based on vehicle location (latitude/longitude) and day.4 Current speed (above) and posted speed limit (below). Note: Turns red when speed limit warning exceeded. (See page 14 to set speed limit alert.)5 Elevation at current location.6 Percentage of current trip completed, distance to next maneuver, and the number of miles and time spent on the trip to this point.7 Match with truck’s odometer to automatically update new fuel logs. Tap the pencil to edit.8 Return to the Route Map Window.9 Gather trip information for up to three trips. Includes odometer settings, hours, and speeds.10 Reset trip information for the selected trip (Tab 1, Tab 2 or Tab 3). (See page 43.)11 Select to automatically reset the information in each tab after the vehicle has remained stationary for the specified number of hours.12 View fuel logs and add fuel purchase information.Tap here1 2 12 834567910 11
TND™ Tablet User Manual 433D. Maps & RoutingManually Reset Trip Information 1. Tap on the tab you want to reset.2. To set the odometer for the selected tab back to zero, tap Reset All.3. Information is captured as you travel the route.Automatically Reset Trip Information To reset trip information after the vehicle has remained stationary after a specific number of hours: 1. Tap on the tab you want to reset.2. Tap Auto Reset.3. Tap to increase the number of hours.4. Tap to decrease the number of hours.5. To save changes, tap Change.6. The Tab displays the auto reset number of hours.
TND™ Tablet User Manual 44 Junction View When on a route, Junction View displays when you have an upcoming maneuver. Set distance in Preferences > Route. Once past the maneuver, Junction View closes and the previous window displays. 1 Signs to follow for the next maneuver.2 Number and direction of lanes for the next maneuver.3 Distance to the upcoming maneuver. Distance decreases as you approach the ramp.4 Lane assist arrow.5 Mute the speaker.6 Return to previous window.Turn View Displays for upcoming turns. Set distance in Preferences > Route. 3D. Maps & Routing123456
TND™ Tablet User Manual 453D. Maps & RoutingLocation and Route Options 1 Nearest cross street2 Current road you’re on, current town you’re in3 Latitude and longitude at current location4 Current location by mile marker5 Return to previous window6 Detour Around Part of the Route 1. On the left side of the Window, tap the number of miles on the route to be avoided.2. The route is recalculated. Around a Specific Roadway 1. On the right side of the Window, tap and to view a list of roads in the current route.2. Tap on one or more roadways to be avoided. A check mark appears in front of each selected road.3. Tap Detour to recalculate the route. Note: Tap Cancel Detour to remove detours. 7 Detour the entire route and add it to the avoid list. (See page 31.)8 Skip to next stop (for multi-stop trips).9 Cancel current route.10 Save current location to the Address Book. (See page 25.)11 Access list of avoided roads. (See pages 17, 31.)12 Access Route Preferences. (See page 17.) 1452 36 97810 11 12
TND™ Tablet User Manual 463E. Tools & FeaturesWeatherNotes: • This feature requires a Wi-Fi connection.• The refresh speed of the weather display is dependent on the connection speed. Weather information is updated every few minutes while Wi-Fi connection is active.• Weather display depends on active weather patterns and map zoom level. To view current weather information and the three-day forecast for your location, tap the Wi-Fi icon ( ) on the map screen and tap the Weather tab. 1 View details for current weather alerts. 2 View weather information at your destination. Note: You can view weather information at any other location by tapping the map and then the Wi-Fi icon and the Weather icon. 3 Select type of weather overlay to display on the map. 4 Select from a variety of weather types:• No weather (turn off)• Traffic impact• Temperature• Feels like• Current precipitation intensity and type• Probability of precipitation• Forecasted precipitation intensity, type, and clouds• Forecasted precipitation intensity and type• Dew point• Relative humidity• Wind speed 5 Slide to adjust the transparency of the overlay on the map. Note: Use the slider to readjust for visibility when switching between day and night modes.13 245Tap to re-display city, street, or intersection.
TND™ Tablet User Manual 473E. Tools & FeaturesTrafficDownload Traffic Everywhere and Predictive Traffic in the Rand McNally Market. (See page 63.) Note: Requires a Wi-Fi connection.To view traffic information, tap the Traffic icon on the map screen. (The icon changes with traffic conditions.) Select Traffic Everywhere for current conditions or Predictive Traffic to view typical conditions by day/time. 1 Optional Route Tap to select either a recalculated route based on traffic events or to stay on the current route. 2 Traffic on Route Tap to view traffic events along your route. 3 Traffic List Tap to view a list of traffic events in the area. 4 Back Tap to return to the previous screen.5 Traffic Source Tap to change.6 Menu Tap to return to the Main Menu.7 Day/Time Choose the day of the week. Use the arrows to set the time. 8 Detailed list Tap any item to view on the map and detour if necessary. (Note: You can also tap icons on the map to view details.)9 Flow Check to display traffic flow in the list and on the map.10 Incidents Check to display incidents in the list and on the map.223344556678910Predictive TrafficTraffic EverywhereTraffic Details11
TND™ Tablet User Manual 483E. Tools & FeaturesTraffic IconsAccident Accident Incident ClosureExit blocked Entrance blocked Traffic Carpool Road workObstruction Dangerous Road condition TemperatureWind Activities Security Delay CancelSize/weight limit Visibility HeavytrafficModeratetrafficLighttrafficTravel timeChance of precipitationCarriageway
TND™ Tablet User Manual 493E. Tools & FeaturesFuel Prices Note: This feature requires a Wi-Fi connection.To show fuel prices, tap the Wi-Fi icon on the map screen and tap the Fuel Prices tab. 1 Displays stations and prices, with distance as the crow flies. Check to show the icons and prices on the map screen. Sort by distance or price. Apply filters for type of fuel and specific brand. Check to show fuel prices along the route.132 4 52345
TND™ Tablet User Manual 503E. Tools & FeaturesTruck ToolsNote: Some features are not available in Car Mode. 1 Back Return to the Main Menu. 2 Truck Info Enter truck information (weight, length, etc.). (See page 13.)3 Timers, Mileage, Trails, and Fuel View driving, on-duty, and maintenance timers; state logs; trails; and fuel purchase information. (See pages 51-54.)4 Warnings Set warning distances for driving time, duty hours, and upcoming weigh stations. (See page 14.) 5 Quick Planner Between any two cities or towns, quickly calculate the distance, driving time, and cost. (See page 55.)6 Rand Motor Carrier’s Road Info View Rand McNally Truck Emergency contact information and truck regulations. (See page 56.)7 Tell Rand Compose a message to send to Rand McNally when you connect to the Dock. (See page 58.)8 Calendar (See page 57.) 9 Notepad (See page 57.) 10 Converter (See page 57.) Quickly convert distance, weight, and temperature.11 Calculator (See page 57.) 12 34 5 6 78 9 10 11
TND™ Tablet User Manual 513E. Tools & FeaturesTimers Note: Odometers count up and record the current mileage. Maintenance counters count down. When a maintenance timer counts down to 2,000 miles, a reminder displays each time the TND starts. 1. Tap Truck Tools.2. Tap Timers, Mileage, Trails, Fuel.3. Tap the Timers tab. Tap the driver profile on the bottom left to switch between two team drivers. On the left, use the Change To field to make adjustments to mileage or hours. The mileage/hours continue to count down from the changed value. 1. Tap -- to decrease the setting.2. Tap + to increase the setting.3. Tap the calculator to display a keyboard. Enter a number and tap Enter.4. Tap Change. On the right, use the Reset To field to set the most common reset value, normally zero. At the beginning of each day or run, tap Reset to set the value back to zero for odometers and 15,000 or 35,000 for maintenance odometers. 1. Tap -- to decrease the setting.2. Tap + to increase the setting.3. Tap the calculator to display a keyboard. Enter a number and tap Enter.4. Tap Reset.
TND™ Tablet User Manual 523E. Tools & FeaturesMileage 1. Tap Truck Tools. 2. Tap Timers, Mileage, Trails, Fuel. 3. Tap the Mileage tab to view list of logs for the current year, ordered by quarter.4. To view quarterly mileage logs for previous years, tap Year. Tap on a quarter to view log entries. 5. Tap on a quarter to view details. Tap View by Date/View by State and Empty/Loaded for more information.To delete a log, tap on the next to the log entry to be deleted. Tap Yes to delete the log.Note: Load Option and Driver Status control how logs are recorded. (See pages 15-16.)
TND™ Tablet User Manual 533E. Tools & FeaturesTrailsUse Trails to record a “bread-crumb” path of GPS coordinates where your truck has traveled.1. Tap Truck Tools.2. Tap Timers, Mileage, Trails, Fuel.3. Tap the Trails tab.4. To record a trail, tap New Trail.5. To end the trail, tap the Trails icon on the map screen. 6. The trail is recorded in the Trails tab.7. Tap on a trail to view details.8. Tap Show on Map to display the trail on the map screen. 9. Tap Edit Name to change the name of the trail. 10. Tap Set Color to change the color of the trail.Note: The Trails feature is also accessible from the Address Book. (See page 25.)
TND™ Tablet User Manual 543E. Tools & FeaturesFuel Logs1. Tap Truck Tools.2. Tap Timers, Mileage, Trails, Fuel.3. Tap the Fuel tab to view a list of fuel logs by quarter.4. Tap Add Fuel to record the date, location and cost of fuel purchase. 5. Tap on any field to edit.6. Check Taxable to include the purchase in the fuel log.7. Tap Save (Note: Fuel economy is calculated automatically.)8. Once fuel purchases have been entered, tap on a quarter to view the details. 9. You can View by State or View by Month.10. Tap the state or month to view fuel purchases.11. Tap View All to see all fuel purchases.
TND™ Tablet User Manual 553E. Tools & FeaturesQuick Planner Use this tool to quickly estimate the mileage and time between any two cities or towns.1. Tap Truck Tools. 2. Tap Quick Planner. The revenue or cost per mile used in the last computation displays.3. Tap From City 1 and select the city.4. Tap To City 2 and select the city.5. The distance displays. 6. Tap Cost per Mile and enter the per mile rate or tap Total and enter the total amount.7. Tap the new dollar amount and tap Enter. 8. The dollar amounts readjust automatically.9. Tap Average Speed (MPH) enter a speed:• Ta p -- or + to decrease or increase the speed.• Tap the calculator to enter a speed.10. Tap Change.11. The driving time displays.
TND™ Tablet User Manual 563E. Tools & FeaturesRoad Atlas InformationTo reference the Rand McNally Motor Carriers’ Road Atlas: 1. Tap Truck Tools.2. Tap Road Atlas Information.3. Select the appropriate country tab. 4. Select the appropriate state/province to view emergency and other key phone numbers.
TND™ Tablet User Manual 573E. Tools & FeaturesCalendar1. Tap Truck Tools.2. Tap Calendar. 3. Use the arrows to view other months and years.4. Tap Today to return to the current date.Notepad1. Tap Truck Tools.2. Tap Notepad. 3. Tap New Note.4. Tap a note in the list to view and edit. Unit Converter 5. Tap Truck Tools.6. Tap Converter. 7. Tap on the first field and select the type of conversion to perform.8. Tap on the second field and enter the value to be converted.9. Tap Enter. Calculator1. Tap Truck Tools.2. Tap Calculator.
TND™ Tablet User Manual 583F. Tell RandTell RandEnter messages for Rand McNally regarding construction, truck restrictions, addresses, your device, and more. 1. Tap Truck Tools.2. Tap Tell Rand. On the left side, tap Current Location. Enter Different Location or Find Location on Map. Note: You can open a Tell Rand speed limit message by tapping the speed limit or mile marker on the map screen. 3. If you selected Enter Different Location, enter it as an address. If you selected Find Location on Map, tap on the map to set the crosshairs at that location, then tap Back.4. On the right side, tap the type of message you want to send. 5. Type your message. 6. Tap Enter to save the message. 7. To discard the message and return to the previous window, tap Back. 8. To send the message, be sure your device is connected to the Inter net.
TND™ Tablet User Manual 594. TripMaker®TripMaker is a trip planning app that allows you to easily browse the map and set up a multi-stop trip. Add via points and send your trip to the Truck GPS app for truck-friendly routing. Please note that TripMaker does not provide truck routing. View Help in the TripMaker app to learn more.
TND™ Tablet User Manual 605. Motor Carriers’ Road AtlasA digital version of Rand McNally’s Motor Carriers’ Road Atlas. Tap Maps at the top right to select pages by state.
TND™ Tablet User Manual 616. Dash CamRecords a video loop as you drive. Tap the red button to record again to stop. Tap the menu icon at the top right to access preferences for video quality, audio, and segments.
TND™ Tablet User Manual 627. Preloaded AppsYour TND™ Tablet comes preloaded with trucking apps available from our partners. For support, view help within each app.Fuel managerAccountingDocument imagingLoad board
TND™ Tablet User Manual 638. Rand McNally MarketAdditional apps are available for download in the Rand McNally Market.Look for these complimentary apps:• Backup cam (requires accessory)• E-Logs for Rand McNally HD-100 (requires accessory)• Predictive Traffic (add to Truck GPS app)• Rand McNally Road Atlas• Traffic Everywhere (add to Truck GPS app) Register to receive information and updates from Rand McNally.Rand McNally Market
TND™ Tablet User Manual 64For more information • Rand McNally Website www.randmcnally.com/trucking • Support www.randmcnally.com/support • GPS accessories store.randmcnally.com • Facebook www.facebook.com/randtrucking 9. More Information
TND™ Tablet User Manual 65TrademarksRand McNally, the Rand McNally logo, the globe logo, and IntelliRoute are registered trademarks and TND is a trademark of RM Acquisition LLC, d/b/a Rand McNally.The Trucker’s Friend and National Truck Stop Directory are registered trademarks of TR Information Publishers.TruckDown is a registered trademark of TruckDown Info International, Inc.Wi-Fi is a registered trademark of the Wi-Fi Alliance.InfoGation is a registered trademark of InfoGation Corporation.Local search information provided by CityGrid Media.Weather data provided by myweather.com.Fuel prices provided by OPIS.Traffic information provided by INRIX, Inc.© 2015 Rand McNally. © 2015 HERE. All rights reserved.Rand McNally follows a continuous improvement process and reserves the right to provide enhancements that may not be reflected in the pictures and specifications in this manual.The information contained herein may be changed at any time without prior notification. Neither this manual nor any parts thereof may be reproduced for any purpose whatsoever without the express written consent of Rand McNally, Inc., nor may it be transmitted in any form either electronically or mechanically, including photocopying, and recording. All technical specifications, drawings, etc. are subject to copyright law.

Navigation menu