RDI Technology LSP-R1000 HOME VIEWER User Manual LSP R1000 EVNT 0905

RDI Technology (Shenzhen) Co., Ltd. HOME VIEWER LSP R1000 EVNT 0905

USERS MANUAL

IntroductionThe LSP-R1000/LSP-R1100 is a combined wireless color camera &video monitor (receiver). A high-resolution color video camera, it includesa built-in motion detector and an audio microphone. An ideal combina-tion for watching the baby, monitoring the porch, pets, yard or the pool. Itis also suited to many small business applications.Features•2.4 GHz wireless technology•2.5-inch (LSP-R1000) / 1.8-inch (LSP-R1100) LCD display for goodpicture display.•Plug and play installation•Supports up to 3 cameras.•LCD display can work with 3 modes : Power save, Auto and Manual•Adjustable cycle time between cameras in Auto mode.•The Brightness, Colour, Contrast, Alarm volum and Audio volume canbe adjusted.•PIR sensor function.(LSP-R1000 : Motion sensing, LSP-R1100 : Sound trigger).Package ContentsYour package contains the following:Part Name and FunctionsLCD Monitor Overview aLCD monitor screen.Displays the live image of the selected wireless camera.bChannel indicator.lights green or red when the channel is selected.Blinks when the motion is detected.cMode select buttons.-P/S : Select when you want to place the system in scan mode.-AUTO : Select when you want to place the system in auto mode.-MANUAL : Select when you want to place the system in manualmode.dSpeaker.You can listen to the sounds of the wireless camera.ePower button.Turn the LCD monitor On or Off.fSpeaker volume adjustment buttons.Adjust the speaker volume level by using the volume buttons.gAlarm volume adjustment button.Adjust the alarm volume of the LCD monitor by tuning the alarm vol-ume tuner.hMENU button.You can select the Brightness, Colour or Contrast setting mode.iv/V buttonssAdjusts the level value of the Brightness, Colour or Contrast.jAudio/Video output jack.You can connect the other display and/or sound device by usingsupplied AV cable.kDC 9V Power input jack.lBattary case.You can use the LCD monitor without the power supply adapter byusing the four AA type batteries or battery pack (optional). Camera Overview aCamara lens.bIR(Infrared Rays) lamp sensor.cMotion sensor.dMicrophone.The microphone is included on the camera.eAn infrared lamp. fBattary terminal box.You can use the camera without the power supply adapter or batterypack (Supplied for LSP-R1001 only) by using the four AA type bat-tery.gDC 9V Power input jack.Installing the wireless cameraInstalling your camera is a simple process. It can be placed on any hori-zontal surface. 1. Locate the camera on a hori-zontal surface.2. Plug the power supply intothe camera and then to awall outlet.3. Make adjustments of thecamera viewing angle by tilt-ing and panning the camerahead with your hand.4. Press the POWER button toturn on the camera. Note : Make sure the power adapter cord is long enough to reach yourmounting location.Operating the Wireless Camera SystemMode operation•P/S mode : Press the P/S button on the LCD monitor, the system will bechanged to P/S mode. The LCD monitor screen blanks into astandby mode while the system continuously scans the activecameras. If a camera detects motion, the LCD monitor displaysthe camera picture and the beeper will sounds. Two minutesafter the last detection, the screen returns to standby mode whilethe LCD monitor resumes scanning. Press the MANUAL orAUTO button to cancel this mode.•AUTO mode : Press the AUTO button on the LCD monitor, the system will bechanged to auto mode. The system automatically rotatesthrough all cameras. When a camera detects motion, the LCDmonitor will display the picture from the camera for a few sec-onds and the beeper will sound. To avoid searching channelsthat do not have cameras/transmitters assigned, set the dipswitches for those corresponding channels to the off position.The dwell time(Time taken to switch between cameras) is presetto 4 seconds and can be adjusted between 2-30 seconds. Toadjust the dwell time, press both the AUTO and MANUAL but-tons simutaneously. Each flash of the LED increases the dwelltime by one second.•MANUAL mode : Press the MANUAL button on the LCD monitor to select a spe-cific camera. The LCD monitor will switch to a different cameraeach time the MANUAL button is pressed. When a cameradetects motion, the LCD monitor will display the picture of thecamera for a few seconds, and the beeper will sounds. To avoidsearching channels that do not have cameras assigned, set thedip switches for those corresponding channels to the OFF posi-tion.Menu Operation•Brightness adjustment1. Press the MENU button repeatedly on the LCD Monitor toselect the brightness mode. If the LED in the ENTER buttonis turned green, stop pressing.2. Adjust brightness level using the v/V buttons.•Blue colour adjustment1. Press the MENU button repeatedly on the LCD Monitor toselect the Colour mode. If the LED in the ENTER button isturned green and fast flicker, stop pressing.2. Adjust blue colour level using the v/V buttons.•Blue colour adjustment1. Press the MENU button repeatedly on the LCD Monitor toselect the Colour mode. If the LED in the ENTER button isturned green and slow flicker, stop pressing.2. Adjust red colour level using the v/V buttons.•Contrast adjustment1. Press the MENU button repeatedly on the LCD Monitor toselect the contrast mode. If the LED in the ENTER button isturned off, stop pressing.2. Adjust contrast level using the v/V buttons.Note:If you press the MENU button, the LED is changed as shown below.Turned green ➔Turned green and fast flicker ➔Turned green andslow flicker ➔ Turned off ➔Truned green.Motion-Sensing CamerasThe cameras are equiped with a motion sensor PIR. When a cameradetects motion, a red light flashes on the camera and an alert sounds onthe LCD monitor.Before Installation•The camera must not faces to direct sunlight or any bright light; oth-erwise, this may cause damage to the camera.•Avoid viewing areas where half of the area is in bright sunlight andthe other half is dark. All types of cameras have difficulty seeingwide variations of light.•This device’s communication range is up to 60 feet (18 m) from theWireless System Controller in a typical home, depending on thenumber of obstacles. These can include metal framing, thick walls,and other wireless devices operating at 2.4 GHz. It is recommendedthat different positions be tried.•The 2.4 GHz video signals pass easily through your home interiorwalls, but the signal may be reflected by power wires or plumbinginside the wall. The most common source of interference aremicrowave ovens. And try to avoid mounting the LCD monitor near amicrowave oven or other source of RF interference such as wirelessphones.Installing the LCD MonitorInstalling your LCD Monitor is a simple process. You can either hang the LCD Monitor to the ceiling with a string or justplace on a leveled place.1. Locate the LCD Monitor on ahorizontal surface.2. Plug the power supply intoLCD Monitor and then to awall outlet.3. Turn on the LCD Monitor.The system of LCD Monitor will be activated in auto mode automati-cally.Note : Make sure the power adapter cord is long enough to reach yourmounting location. DC IN 6VPOWERSCANMANUALAUTOCAMERAALARM VOL. VOL.123DC IN 6VDC IN 6VSCANMANUALAUTOCAMERAALARM VOL. VOL.123AV-OUTMENUSCANMANUALAUTOCAMERAALARM VOL. VOL.123POWERabcde kljfhigDC IN 6VPOWERabecgfdWireless LCDMonitor DC 9V Power Adapter (2)Battery pack forwireless LCDMonitor (Supply forLSP-R1001 only).Battery pack forwireless camera(Supply for LSP-R1001 only).AV CableWireless MotionSensor Camera
SpecificationsLCD MonitorMulti-camera OperationIf you use the multi camera, you must set the Dip-switch for each cam-eras and the LCD monitor. The LCD monitor system is designed to workwith up to three cameras. Additional cameras have to be purchased.•Dip-switch positon of the LCD monitorYou can find the dip-switch on the battery box as shown below.•Dip-switch positon of Wireless CameraYou can find the dip-switch on the battery box as shown below.Battery installation guide.When you use the Wireless camera system without the supplied adapter,you can use the Wireless system by using four batteries.Detach the battery cover on the camera and LCD monitor, and insertfour AA size batteries on the with 3and #aligned correctly as shownbelow.Note : Do not mix old and new batteries and never mix different typesof batteries such as standard, alkaline, etc.Trouble shootingCheck the following guide for the possible cause of a problem beforecontacting service.Wireless CameraAntenaThis lightning flash with arrowhead symbol within an equilateral triangle is intended to alert theuser to the presence of uninsulated dangerous voltage within the product’s enclosure that may beof sufficient magnitude to constitute a risk of electric shock to persons.The exclamation point within an equilateral triangle is intended to alert the user to the presenceof important operating and maintenance (servicing) instructions in the literature accompanyingthe product.FCC WARNING : This equipment may generate or use radio frequency energy. Changes or modifications tothis equipment may cause harmful interference unless the modifications are expressly approved in theinstruction manual. The user could lose the authority to operate this equipment if an unauthorized change ormodification is made.Regulatory Notices For U.S.AThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant toPart 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter-ference when the equipment is operated in a commercial environment.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used inaccordance with the instruction manual, may cause harmful interference to radio communications.Operation of this equipment in a residential area is likely to cause harmful interference in which case theuser will be required to correct the interference at his own expense.•Asuitable conduit entries, knock-outs or glands shall be provided in the cable entries of this product inthe end user.•Caution: Danger of explosion if battery is incorrectly replaced. Replaced only with the same or equiva-lent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’sinstructions.•Holes in metal, through which insulated wires pass, shall have smooth well rounded surfaces or shallbe provided with brushings.Warning: Do not install this equipment in a confined space such as a bookcase or similar unit.Warning: Wiring methods shall be in accordance with the National Electric Code, ANSI/NFPA 70.Warning: This is a class A product. In a domestic environment this product may cause radio interferencein which case the user may be required to take adequate measures.Warning: To reduce a risk of fire or electric shock, do not expose this product to rain or moisture.Caution: This installation should be made by a qualified service person and should conform to all localcodes.Caution: To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.Caution: The apparatus should not be exposed to water (dripping or splashing) and no objects filled withliquids, such as vases, should be placed on the apparatus.Important Safety InstructionsLG WIRELESS HOME VIEWERInstruction ManualModels : LSP-R1000LSP-R1100Before installing, operating or adjusting this product, please read this instruction booklet carefully and completely.1 321 32Set the camera 1 inuse.Set the camera 1 and 2in use.Set the all 3 cameras inuse (Default setting).132132Set the camera aschannel 1 (Default set-ting).Set the camera aschannel 2.Set the camera aschannel 3.Item DescriptionFrequency Range 2.400 --- 2.483GhzPolarizaion MonopoleSWR < 2 : 1Gain 0 dBImpendance 50 OhmOutline Size øı2x85mm (Transmitter)/øı2x145mm (Receiver)Item DescriptionRated Voltage DC 9 VRated Current 800 mAFrequency Range 2.4~2.48 GHzFrequency 2.41, 2.44, 2.47 GhzIntermediate Frequency 480MHzType of Radio Waves AnalogDisplay Mode TMRDisplay Size (Diagonal) 2.5 inch (LSP-R1000), 1.8 inch (LSP-R1100)Number of Dots(HxV) 882x228 DotDot Pitch (H x V) 0.056 x 0.168 mmColor Number Full Color/16 MillionViewing Angle U/D: 17/45o L/R: 45/45oBrightness 250cd/m2Contrast Rate 200:1Light Source Type LEDTV System NTSC/PAL (Color) StandardColor Configuraton R.G.B StripOverall Size 75mm (W) x 118mm (H) x 46mm (D)Weight 180gOperating Temperature -10° to 40°Operating Humidity Less than 85%Item DescriptionRated Voltage DC 9 VRated Current 400 mATransmit Power Less than 10mWFrequency Range 2.4~2.48 GHzFrequency 2.41, 2.44, 2.47 GhzModulation Method FMOscillation Method PLLImage Sensor 1/3'' CMOS ICIntegrated Lens 5.6mm, F1.8 Fixed FocusTV System NTSC/PAL (Color) StandardAuto Electronic Exposure 1/60~1/15000 sec.Min Illumination 0.5 LuxResolution 360 Horizontal TV linesSignal/Noise Ratio 48dBOverall Size 95mm W x 107mm H x 62mm DWeight 100g (Without Battery)Operating Temperature -10° to 40°Operating Humidity Less than 85%CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCKDO NOT REMOVE COVER (OR BACK)NO USER-SERVICEABLE PARTS INSIDEREFER SERVICING TO QUALIFIED SERVICE PERSONNEL.CAUTIONRISK OF ELECTRIC SHOCK DO NOT OPEN1. Read these instructions. - All thesesafety and operating instructionsshould be read before the product isoperated.2. Keep these instructions. - Thesafety, operating and use instructionsshould be retained for future refer-ence.3. Heed all warnings. - All warnings onthe product and in the operatinginstructions should be adhered to.4. Follow all instructions. - All operat-ing and use instructions should befollowed.5. Do not use this apparatus nearwater. - For example: near a bathtub, wash bowl, kitchen sink, laundrytub, in a wet basement; near a swim-ming pool; etc.6. Clean only with dry cloth. - Unplugthis product from the wall outletbefore cleaning. Do not use liquidcleaners.7. Do not block any ventilation open-ings. Install in accordance with themanufacturer’s instructions. - Slotsand openings in the cabinet are pro-vided for ventilation, to ensure reli-able operation of the product, and toprotect it from over- heating. Theopenings should never be blocked byplacing the product on a bed, sofa,rug or other similar surface. Thisproduct should not be placed in abuilt-in installation such as a book-case or rack unless proper ventilationis provided and the manufacturer’sinstructions have been adhered to.8. Do not install near any heatsources such as radiators, heatregisters, stoves, or other appara-tus (including amplifiers) that pro-duce heat.9. Do not defeat the safety purposeof the polarized or grounding-typeplug. A polarized plug has twoblades with one wider than theother. A grounding type plug hastwo blades and a third groundingprong. The wide blade or the thirdprong are provided for your safety.If the provided plug does not fitinto your outlet, consult an electri-cian for replacement of the obso-lete outlet.10. Protect the power cord frombeing walked on or pinched par-ticularly at plugs, conveniencereceptacles, and the point wherethey exit from the apparatus.11. Only use attachments/acces-sories specified by the manufac-turer.12. Use only the cart,stand, tripod,bracket, or tablespecified by themanufacturer, orsold with appara-tus. When a cart is used, usecaution when moving the cart/apparatus combination to avoidinjury from tip-over.13. Unplug this apparatus duringlightning storms or when unusedfor long periods of time.14. Refer all servicing to qualifiedservice personnel. Servicing isrequired when the apparatus hasbeen damaged in any way, suchas power- supply cord or plug isdamaged, liquid has been spilledor objects have fallen into theapparatus, the apparatus hasbeen exposed to rain or mois-ture, does not operate normally,or has been dropped.P/NO : MFL3058013?SymptomAbnormal or no picutreInterference on Camera pictureAudio problemsCorrection•Check the connection. •Plug the power cord into the walloutlet securely.•Make sure the camera(s) and LCDmonitor switched on.•Maker sure rechargeable battery ischarged.•Check the batteries polarity with 3and #aligned correctly.•Make sure each camera is withinrange, and that no large obstuctionsare blocking the signal.•Try repositioning the camera, moni-tor or both to impove the receptionquality.•Reposition other nearby equipmenttransmitting on the 2.4GHz frequen-cy.•Ensure the volume is turned up suf-ficiently on the monitor.•Make sure the sound is within themicrophone range.•If the units emit a loud wailingsound(feeds back), try moving thecamera away from the monitor orangle the monitor differently.1 32132DC IN 6VDC IN 6VRear of the camera.Rear of the LCD monitor.FCC NOTE:THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1)•This device may not cause harmful interference.2)•This device must accept any interference received including interference that may cause undesired operation

Navigation menu