RDI Technology CA650D DIGITAL CAMERA User Manual BB2411 Video Baby Monitor User s Guide

RDI Technology (Shenzhen) Co., Ltd. DIGITAL CAMERA BB2411 Video Baby Monitor User s Guide

User Manual

ENGLISH FRANÇAIS ESPAÑOLCARE ‘N‘ SHARE VIDEO BABY MONITORBB3500 Series / BB4300 SeriesVersion 1.0USER’S GUIDE
Safety Precautions• Adult assembly is required. Keep small parts away from children when assembling.• This product is not a toy. Do not allow children or infants to play with it.• This video monitor is not a substitute for responsible adult supervision.• Test the video monitor before use. Become familiar with its functions.• Keep the cords out of reach from children and infants.• Never use extension cords with power adapters.• Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack.• Only insert batteries/battery pack of the same type.• Insert batteries with the correct polarity.• Do not mix new and used batteries.• Do not mix alkaline, standard, and rechargeable batteries.• Remove exhausted batteries from the product.• Keep all batteries away from children and infants.• Dispose or recycle batteries in accordance with local laws, which may vary by location.• Do not cover the video monitor with a towel or blanket.• Do not use the video monitor near water.• Do not install the video monitor near a heat source.• Do not touch the plug contacts with sharp or metal objects.• Keep this user’s guide for future reference.To Avoid Injury to Children & Infants:•MAKE SURE to keep the camera and all power cords are least 3ft / 1m away from cribs and out of reach of your child.• Use the included cable clips to help keep power cords away from your child. 3ft / 1m
Product Includes..............................3Monitor Overview...........................3Camera Overview...........................4Getting Started ...............................6Optional - Mounting the Camera............... 7Using the Cable Clips.............................. 9Using Your Baby Monitor ..............10Adjusting Volume .................................. 10Changing Channels............................... 11Talking to Your Baby..............................11Using Digital Zoom................................ 11Locking the Monitor............................... 12Video Off Mode (Audio Only Mode)....12Inserting a microSD Card ....................... 12Video Recording ................................... 13Taking Snapshots ..................................14Using the Night-Light .............................14Playing Sleep & Soothe Sounds............... 15Using Quad and Scan View Mode.......... 16Using the Main Menu ............................ 17Setting the Date and Time....................... 17Adjusting Camera Brightness .................. 18Configuring Recording Options............... 19Configuring Recording Options............... 19Changing Languages............................. 20Configuring Alarm Volume ..................... 21Temperature Alerts.................................22Using the Timer ..................................... 24Using Motion Tracking (P/T Camera Only)................................ 24Using Playback Mode............................25Formatting Memory Card....................... 28Using Power Saving Mode ..................... 29ENGLISH1Table of Contents:
Restoring Default Settings ....................... 29Remotely Connecting to Your Cameras .......................................31Using Audio / Video Out ...............32Pairing Additional Cameras ..........34Technical Specifications .................36Fixed Camera ...................................... 36P/T Camera ......................................... 363.5” Monitor ........................................ 364.3” Monitor ........................................ 36Unit Dimensions ............................37Troubleshooting ............................38Need Help?...................................382
ENGLISH3Product Includesx1*x1Fixed CameraMonitorPower Adapterx1**See product packaging for exact contentsx1*Mounting Kit Power Adapterx1Monitor OverviewCable Clipsx3*Enter / exit menuSwitch channelTalkZoomStand Battery compartmentPower / Sound LED’s*Speaker*Power / Sound LED’s on the left side of the 3.5” LCD monitorx1*Pan/Tilt (P/T)CameraResetbuttonORP/T Mounting Plate(for P/T camera only)x1*Joystick
LightsensorMicrophoneSpeakerLensInfrared LED’sStandTemperatureSensorPower portPairing buttonNight light buttonFixed Camera (BB3500 / BB4300 Series)AntennaCamera OverviewVolumecontrols Play / stop sounds Next soundmicroSDslotChargingindicatorPower portMini USB portAV out portLock modeQuadview / Scan modeAntenna Power / video on /offStart / stop recordingNight light SnapshotWi-Fi Cradle connector*Mounting thread*Wi-Fi Cradle not included. See “Remotely Connecting to Your Cameras” on page 31 for details.LEFTRIGHTTOPBOTTOM4
Powerswitch PowerindicatorVolume dialP/T Camera (BB3500 Series)Power portAntennaSpeakerLensLight sensorPairing buttonPower button Volume dialCeiling mount switchMicrophoneTemperature sensorInfrared LED’sENGLISH5
Make sure all power cables are at least 3ft / 1m away from the crib and out of reach of your child. Use the included cable clips to help keep power cords away from your child.Connect the power adapter to the monitor.Power buttonGetting Started12Connect the power adapter to the camera.Slide the power switch to ON or press and hold the power button.Power switch3Fixed cameraP/T cameraPress and hold the power button on top of the monitor for 3 seconds. The display turns on.4Power button6
Make sure all power cables are at least 3ft / 1m away from the crib and out of reach of your child. Use the included cable clips to help keep power cords away from your child. See “Using the Cable Clips” on page 9 for installation details.38mmFixed CameraReattach the camera base hereENGLISH7Optional - Mounting the CameraTap anchors into holes with a hammer. Insert screws 2/3 of the way. Before permanently mounting the camera: • Determine where you will get the best view of your baby. • Ensure the power cable is long enough to power the camera.• Test your camera(s) before mounting permanently.1Drill 2 holes in the wall with centers exactly 38mm apart.25Align the mounting points with the screws and push the camera down. To mount your camera:3While holding the camera base firmly in place, twist the camera counterclockwise to remove it from the base.4Reattach the base to the mounting thread on the back of the camera.
8P/T Camera26mmCeiling mounting switch1Drill 2 holes in the wall with centers exactly 26mm apart.Hold the included P/T mounting plate against the ceiling. Use a pencil to mark the centres of the 3 mounting slots. Drill holes where you have markedNOTE: Make sure that the lone mounting slot points toward the viewing area. Tap anchors into holes with a hammer. Insert screws 2/3 of the way. 2OR94mm34mmPlace the camera on the mounting plate and twist clockwise to lock in place.5NOTE: For ceiling mounting, use the ceiling mounting switch on the bottom of the P/T camera to invert the video image.If wall mounting:If ceiling mounting:Align the slots on the mounting plate with the screws and push down to lock in place.3Tighten the screws to secure the mounting plate in place.4Viewing area
ENGLISH9Pull up to extend antennatIt is recommended to charge the battery for 5 hours before use.tThe charge LED glows red while the monitor is charging and glows green when charging is complete.tFor overnight monitoring, it is recommended to connect the power adapter. When fully charged, the monitor will stay on up to 4 hours in normal mode or 8 hours in Video OFF mode.tUse Power Save mode to conserve battery power.tThe power LED glows constantly when battery is full and blinks twice per second when running low.tFor better reception, pull up the antenna on the monitor.TipsOption 2Option 3Option 1Thread the extra cable through the cable clip notches.Thread the extra cable through the cable clip notches. Wrap the excess cable around the clip.Wrap the excess cable around the clip.Using the Cable Clips
Press + and - to adjust monitor volumeAdjusting VolumeFixed Camera P/T CameraUse the volume dial to adjust camera volumeMonitorUsing Your Baby MonitorThe monitor shows the following icons during use:Icon MeaningSignal strengthSelectedchannelREC RecordingVolume mutedX2 Digital zoom activatedSong currently playingTalk feature activatedTouch buttons lockedTimer setNight light onIcon MeaningmicroSD card insertedFile overwrite enabledNew pictures or videosBattery fullBattery lowBattery charging68°F Current room temperatureOutofrangeCamera out of range or off.10
Press tocycle through connectedcameras.The currently selected camera is shown on screen.To connect additional cameras to the monitor, see “Pairing Additional Cameras” on page 34.The monitor only plays sound from the camera that is currently being viewed.Changing Channels1Press on the monitor to zoom in. A X2 icon appears on the screen.2Move the joystick to adjust the zoom area.3Press again to return to normalviewing mode.Press and hold to talk to the selected cameraUsing Digital ZoomPressX2Talking to Your BabyENGLISH11
Press to turn the screen off and monitor sound only.The monitor will play sound from the selected channel only.NOTE: If Scan mode is enabled, the monitor will play sound from the channel that is currently selected.Video Off Mode (Audio Only Mode)Press any button to turn the screen back on.12Locking the MonitorPress the Lock button ( ) on the side of the monitor to disable the touch buttons on the front of the monitor. A lock icon ( ) appears on the monitor. Use this function to keep from pressing touch buttons by accident.PressPress the Lock button ( ) again to re-enable touch buttons.Inserting a microSD CardYou must use a microSD card (not included) with your video monitor to store picture and video files from your camera(s). The video monitor supports microSD cards up to 32 GB (gigabytes).Video Off mode is a power-saving function which turns the monitor’s display off while continuing to play audio from the camera(s). NOTE: See “Using Power Saving Mode” on page 29 for more power-saving options.12
You can save recorded video from a single camera or all cameras connected to your system. Video files are saved to the microSD card (not included).Recording buttonFor details on viewing and managing videos, see “Using Playback Mode” on page 25.To record video:To insert a microSD card:1Orient the microSD card as shown below and insert it into the microSD slot.microSD card slotYou can now save recorded video and snapshots from your camera(s) on your monitor. See “UsingPlayback Mode” on page 25 for details on viewing and managing video and picture files.ENGLISH13Video Recording1Use the monitor to view the channel(s) you wish to record video from. You can record video from one channel by using normal viewing mode, or all channels using Quad mode.2Press the manual recording button ( ) on top of the monitor to begin recording.3Press the manual recording button ( )again to stop recording. Recording will stop automatically after 10 minutes.A new file icon ( ) appears on the screen.2Push the microSD card in until it clicks into place.
Snapshot buttonA new file icon ( ) appears on the screen.For viewing and managing snapshots, see “UsingPlayback Mode” on page 25.Press the Snapshot button ( ) on top of the monitor to save a picture of your monitor’s display. Press the night light button ( ) on top of the monitor to turn on the night light for the currently selected camera.ORPress the night light button ( ) on top of the camera where light is needed.Using the Night-LightPressPressTo take a snapshot:The snapshot feature allows you to capture images from a single camera channel in normal viewing mode or all 4 channels in Quad mode. Snapshot images are saved to the microSD card (not included).Taking SnapshotsFixed Camera Only14
Playing Sleep & Soothe SoundsThe camera can play 5 different pre-loaded Sleep& Soothe sounds.To play sounds:12Press the button on the side of the monitor to play sound on the currently selected camera.Press the button on the side of the monitor to play the next sound in sequence.PressA icon with the number of the currently playing sound (1-5) appears in the bottom-left corner of the monitor.3Press the button to stop playing sounds.Press1ENGLISH15
If you have multiple cameras, Quad view mode and Scan view mode help you keep an eye on them.Scan view modeQuad view modeUse Scan mode to display video from each camera connected to your system in full-screen for 3 seconds before switching to the next camera.1From normal viewing mode, press once to activate Scan mode. The monitor will begin displaying connected video channels in sequence.2Press to return to normal viewing mode.Press onceUse Quad mode to display video from all 4 camera channels in split-screen (viewing area appears black for channels that do not have a camera connected).1From normal viewing mode, press twice to activate Quad mode. The monitor will display all 4 channels in split-screen.2Press to return to normal viewing mode.Press twiceUsing Quad and Scan View Mode16
1Press2Move joystick toadjust menu options. Press to make a selection.Press to launch the main menu.Move the joystick to adjust menu options. Press the joystick to make a selection.Press again to exit the main menu. Press again to exit menusUsing the Main MenuSetting the Date and Time1Press , then select Settings.SelectSettings2Select Date& TimeENGLISH17
3Move the joystick left and right to switch between fields. Move the joystick up and down to adjust the date and time.4Push the joystick in to save changes.2SelectSetupSelectBrightness3Adjust the brightness level by moving the joystick left and right.Adjustcamerabrightness1Press , then select Setup.Adjusting Camera BrightnessNOTE: Video monitor uses 24-hour time.5Press repeatedly to get back to normalviewing mode.18
Configuring Recording Options1Press , then select Recording.SelectRecording2Select VideoQuality3Select High for clearer video or Low for smaller file size.You may choose to record video at a low or high quality depending on your recording needs. To adjust video quality:You can configure your system to overwrite old video files to make way for new recordings.Configuring Recording OptionsENGLISH191Press , then select Recording.SelectRecordingTo configure file overwriting:
2SelectLanguageChanging Languages1Press , then select Settings.SelectSettingsThis baby monitor supports 3 languages: English, French, and Spanish.To change languages:202Select FileOverwrite3Select Yes to enable file overwriting or No to disable.
3Move the joystick up and down to switch between languages. Press the joystick to select a language.21Press , then select Alarm.SelectAlarmSelect AlarmVolumeConfiguring Alarm VolumeYou can set the volume of the alarm used by the timer and temperature alert functions. 3Move the joystick left and right to adjust the volume of the alarm.Adjust alarmvolumeENGLISH21
231Press , then select Settings.SelectSettingsSelect Temp.Display UnitMove the joystick up and down to select oC (Celsius) or oF (Fahrenheit). Select the desired unit for temperature display.To select temperature units:The temperature alert feature allows you to ensure the baby’s room is at a comfortableand safe temperature. The monitor beeps if the temperature gets too hot or cold. Temperaturesensor is accurate within 3°F/1°C.You can control the high and low temperatures that trigger alerts or disable temperature alerts.Temperature Alerts1Press , then select Alarm.SelectAlarmTo setup temperature alerts:22
4Select On to activate temperature alerts.Select Ont23SelectTemp.AlertRangeMove the joystick up and down to change your selection. Move the joystick left and right to adjust the high and low temperatures that trigger alerts.Adjust high and low temperaturesENGLISH23
Using Motion Tracking(P/T Camera Only)P/T cameras with motion tracking enabled will follow any movement the camera detects. NOTE: This feature is useful only for tracking single objects, such as your baby moving around the crib.1Press , then select Alarm.SelectAlarmUsing the TimerYou can set the monitor to sound an alarm after a preset period of time to help you stay aware of feeding and nap times.23Select TimerMove the joystick left and right to switch between hours and minutes. Move the joystick up and down to adjust timer duration.4Push the joystick in when you have finished setting the timer.5Select On to start the timer or Off to cancel.Adjust timer duration24
Move the joystick up and down to change the channel you are configuring. Move the joystick right or left to toggle motion tracking on and off.3Choose channel21Press , then select Setup.SelectSetupSelect MotionTrackingOn/OffTo enable motion tracking:Select On orOffUsing Playback ModePlayback mode is used to view and manage snapshots and video files stored on the microSD card (not included). rNOTE: You may use the joystick to override the automatic movement of your P/T camera when motion tracking is activated. Press the joystick during normal viewing mode.1To view files:ENGLISH25
Move the joystick up and down to select the VIDEO or PICTURE folder. Press the joystick to select a folder.2 VIDEO PICTURE3Move the joystick up and down to choose the date you wish to playback. Earliest pictures and videos are shown first. Push the joystick in to select a folder.The folders are named by the year, month, and date. For example, a folder named 02042013 means that the folder was created in 2013, February (02), on the 4th.4Move the joystick up and down to choose the file you wish to playback. Push the joystick in to select a file.To back up picture / video files on PC:1Remove the memory card.2Insert the microSD card into a memorycard reader (not included)or use an SD card adapter (not included) to convert the microSD card to SD/HCSD memory card format.3When the AutoPlay menu appears, click on Open folder to view files.NOTE: If the Autoplay menu does not appear, open Windows Explorer and locate the microSD card manually. Double-click to view the contents of the microSD card.26
Press the joystick to enter playback mode.1To delete files and folders:4Double-click the VIDEO folder, then select the sub-folder you want to open.NOTE: The folders are named by the year, month, and date. For example, a folder named 02042013 means that the folder was created in 2013, February (02), on the 4th.5Double-click the desired video file to begin playback.To back up picture / video files on Mac:1Remove the memory card.2Insert the microSD card into a memory card reader (not included)or use an SD card adapter (not included) to convert the microSD card to SD/HCSD memory card format.3Double-click the USB icon ( ) on your desktop to view the microSD contents.4Double-click the VIDEO folder, then select the sub-folder you want to open.NOTE: The folders are named by the year, month, and date. For example, a folder named 02042013 means that the folder was created in 2013, February (02), on the 4th.5Double-click the desired video file to begin playback.ENGLISH27
1Press , then select Settings.SelectSettingsTo format memory card:Select Yes to delete the chosen file orfolder or No to cancel.4 Delete?Yes NoFormatting Memory CardThe format function permanently erases all saved picture and video files on the microSD card (not included). Ensure that any video and picture files you wish to keep are backed up on your computer prior to formatting.Move the joystick up and down to toggle between files or folders. 2 VIDEO PICTURE XHighlight the file or folder you wish to delete. Move the joystick to the right to highlight the red “X“ and push the joystick in.NOTE: The VIDEO folder cannot be deleted.328
Using Power Saving Mode1Press , then select Power Save.SelectPowerSaveTo enable power saving mode:Select On to activate power saving mode or or select Off to cancel.22SelectFormatMemoryCard3Select YesPower save mode is a battery-conservingfunction that shuts off the monitor’s LCD display if no sound is detected by your camera(s) for 2 minutes. When sound is detected, the display turns back on.ENGLISH29
2SelectDefaultSettings3Select YesRestoring Default SettingsRestoring your video monitor returns any setting changes to default settings. NOTE: Restoring to default settings will not delete saved video and picture files.1Press , then select Settings.SelectSettingsTo restore to default settings:30
Remotely Connecting to Your CamerasThe Wi-Fi Cradle accessory allows you to connect to your cameras from anywhere (model #: ACCWIFI1, not included). Use the Wi-Fi Cradle to:tConnect to your cameras from anywhere using your mobile phone (iOS & Android) or computer (PC & Mac).tRemotely connect to your system without disrupting live viewing mode on your monitor.tProvide a secure, password-protected feed for accessing your camera(s) remotely..FPO - will be picture of Wifi CradleENGLISH31
For large screen viewing, you can connect the video monitor to your television (RCA only) using an optional 3.5mm to RCA adapter (model #: ACCAVOUT1).To view files on a television:1Power on the television you will use to view the baby monitor’s display.2Connect the 3.5mm end of the adapter to the monitor’s A/V out port.Connect 3.5mm end3Connect the RCA ends of the adapter to audio and video inputs on your television.Video from the baby monitor is immediately displayed on your television. NOTE: The monitor’s LCD display turns off when using this feature.4Turn on your TV to the correct input.1Press , then select Settings.SelectSettingsUsing Audio / Video OutTo configure audio / video out:NOTE: Only required if viewing on a PALtelevision set.32
3Select NTSC (North America) or PAL(UK/Europe) and by pushing the joystick.2SelectDefaultSettings3.5” to RCA adapterFPO3.5” terminationRCA terminationENGLISH33
24Use the joystick to select the channel you would like to pair the camera to.1Place the camera and monitor next to each other. Make sure the camera is turned on and plugged in.Press , then move the joystick left or right to select SETUP.SelectSetupSelectPairing3If a camera is already connected to this channel, the new camera will replace the existing camera.Select a channelto pair the camera to.Pairing Additional CamerasThe camera(s) included have already been paired with the monitor. If you have purchased additional add-on cameras (model# BB311AC1 /BB351AC1), OR if your monitor and camera are not paired up, follow the steps below.To pair a camera to your monitor:34
5Press the PAIR button on the back of the fixed camera or the bottom of the P/T camera within 30 seconds of selecting the pairing channel.Press PAIRPress PAIR• Immediately move the camera away from the monitor to avoid speaker feedback.• The monitor can connect up to 4 cameras.• The monitor can be used with a combination of fixed and P/T cameras.NotesLive video from the camera is immediatelyshown on the monitor once the camera is successfully paired.ENGLISH35
36Technical SpecificationsFixed Camera Frequency 2.4GHz - 2.48GHzMaximum Range Up to 450ft / 137m outdoors*Up to 150ft / 46m indoors*Image Sensor 1/6” Color Image SensorLens 4.9mm F2.8IR LED 8 pcsPower Adapter 5.0V DC 1000mAWeight 0.2lbs / 0.1kgP/T CameraFrequency 2.4GHz - 2.48GHzMaximum Range Up to 450ft / 137m outdoors*Up to 150ft / 46m indoors*Image Sensor 1/6” Color Image SensorLens 3.0mm F2.8IR LED 10 pcsPower Adapter 5.0V DC 1000mAWeight 0.6lbs / 0.3kg3.5” MonitorFrequency 2.4GHz - 2.48GHzDisplay 3.5” TFT Color LCDPower Adapter 5.0V DC 1000mABattery Li-ion Rechargeable Battery 3.7V DC ???mAhBattery Life Up to 5 hours in normal modeUp to 8.5 hours in Video Off modeWeight 0.4lbs / 0.2kg4.3” MonitorFrequency 2.4GHz - 2.48GHzDisplay 4.3” TFT Color LCDPower Adapter 5.0V DC 1000mABattery Li-ion Rechargeable Battery 3.7V DC 1500mAhBattery Life Up to 4 hours in normal viewing modeUp to 8 hours in Video Off modeWeight 0.5lbs / 0.2kg*Based on unobstructed line of sight. Actual range will vary based on surroundings.
Fixed CameraP/T Camera4.3” Monitor3.5” Monitor3.2in81mm5.4in137mm1.1in28mm3.9in99mm5.9in149mm3.9in99mm3.2in81mm5.4in137mm1.1in28mmENGLISH372.4in60mm5.9in149mm2.9in73mmUnit Dimensions
38TroubleshootingProblem SolutionNo video displayed on the monitor tPress and hold the button for 3 seconds to power on the monitor.tMonitor is out of batteries. Plug in the monitor power adapter.tVideo Off mode is on. Press any button to turn the screen back on.tPower save mode is on. Press any button to turn the screen back on.tIf none of the solutions above work, press the Reset button on the back of the monitor.Monitor screen keeps turning offtThe monitor battery is low. Plug in the monitor power adapter.tPower save mode is on. Press any button to turn the screen back on.The camera is not detected; “Out of Range” is shown on the monitortMake sure the camera is powered on.tThe camera and monitor may be out of range. Extend the antennas on the monitor and camera or move the monitor and camera closer together.tYou may need to pair the camera and the monitor again. See “Pairing Additional Cameras” on page 34 for details.tWrong channel selected. Press repeatedly to select a channel with a camera connected to it.Feedback / squealing noise coming from the monitortYour camera and monitor may be too close to each other.Move them further apart.tLower the monitor volume.Touch buttons on the monitor aren’t workingtPress the Lock button ( ) on the side of the monitor to unlock the touch buttons.Display is frozen tPress the Reset button on the back of the monitor to reboot. Settings and saved files are unaffected.Product Support is available 24/7 including product information, user guides, quick start guides, and FAQ’sNeed Help?
ENGLISH39CLEANINGClean the monitor and camera with a slightly damp cloth or an anti-static cloth. Never use cleaning agents or abrasive solvents.• Do not clean any part of the product with cleaners with thinners or other solvents and chemicals. This may cause permanent damage to the product, which is not covered by the Warranty. When necessary, clean it with a damp cloth.• Keep your camera and monitor away from hot, humid areas or strong sunlight, and do not get it wet.• Every effort has been made to ensure high standards of reliability for your baby monitor. However, if something does go wrong, please do not try to repair it yourself. Contact Customer Service for assistance.DISPOSAL OF THE DEVICEAt the end of the product life cycle, you should not dispose of this product with normal household waste, but take the product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user’s guide, and/or box indicates this.Some of the product materials can be re-used if you take them to a recycling point. By reusing some parts or raw materials from used products you make an important contribution to the protection of the environment.Please contact your local authorities in case you need more information on the collection points in your area. Dispose of the battery pack in an environmentally-friendly manner according to your local regulations.NOTICESWARNING: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device.FCC NOTICEThis device complies with Part 15, subpart C, of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. However, it is imperative that the user follows the guidelines in this manual to avoid improper usage which may result in damage to the unit, electrical shock and fire hazard injury.CAUTION: To maintain compliance with the FCC’s RF exposure guidelines, place the camera at least 20cm (7.87in) from nearby persons.CANADA/IC NOTICEThis device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
USER’S GUIDE
viiIt is imperative that the user follows the guidelines in this manual to avoid improper usage which may result in damage to the product, electrical shock, and fire hazard injury. In order to improve the features, functions, and quality of this product, the specifications are subject to change without notice from time to time.WARNING!STRANGULATION HAZARD: Infants have STRANGLED in power cords. Keep power cords more than 3 feet away from cribs, bassinets, play yards and other safe sleep environments for infants.NOTICESFCC Notice:This equipment has been certified and found to comply with the limits regulated by the FCC part 15, subpart C. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception (which can be determined by turning the equipment on and off), the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna• Increase the separation between the equipment and receiver• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected• Consult the dealer or an experienced radio or television technician for assistanceWarning: To ensure compliance with the FCC’s RF exposure guidelines, this equipment should be installed and operated with minimum distance 20cm (7.87in) between the radiator and nearby persons.Industry Canada Notice:This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation.This Class B digital apparatus complies with Canadian ICES-003.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the device. Toute modification non approuvée explicitement par le fournisseur de licence de l'appareil peut entraîner l'annulation du droit de l'utilsateur à utiliser l'appareil.RoHS:This product is fully compliant with the European Union Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment ("RoHS") Directive (2002/95/EC). The RoHS directive prohibits the sale of electronic equipment containing certain hazardous substances such as lead, cadmium, mercury, and hexavalent chromium, PBB, and PBDE in the European Union.Please see the label on your device for FCC/IC certification numbers.

Navigation menu