R tron SNIDEN25 iDen Mini Wireless Repeater User Manual

R-tron Inc. iDen Mini Wireless Repeater

Contents

Part 2

iDEN MINI User’s Manual -17- 2.2.6. HPA (High Power Amplifier) The High Power Amplifiers (HPAs) amplifies the transmitted signal from a base station at the final stage of the repeater and vice versa. Figure 10. HPA(High Power Amplifier)
iDEN MINI User’s Manual -18- 3. Hardware Installation The installation procedure is as follows:  Check List of Items  Mounting  Grounding  RF Connection  Power up 3.1 Check List of Items Index Items Q’ty 1 iDEN MINI 1 2 Power Cord 1 3 Screws for Mounting 4 Items Figure 11. Items 1 2 3
iDEN MINI User’s Manual -19- 3.2 Mounting iDEN MINI is easy to mount using the assembled mounting bracket, which has Ø9 holes for the provided 5/16" fixing screws. Figure 12. Mounting CAUTION Firmly affix the equipment on the wall of a building and Check necessary.
iDEN MINI User’s Manual -20- 3.3 Grounding A rod on the left side is intended for a building ground. Connect the ground cable to the rod. Figure 13. Grounding 3.4 RF Cable Connection a. Connect a cable from a donor antenna to the DONOR ANTENNA Port. b. Connect a cable from the SERVICE ANTENNA Port to a repeater’s service antenna. WARNING Dangerously high voltages may occur and damage the equipment if the equipment is not groundedproperly.
iDEN MINI User’s Manual -21- Figure 14. Configuration: RF Cable Connection 3.5 Power Up a. Connect the power cord. b. Plug the power cord into a wall outlet. c. Switch on. d. Check if the green LED at the bottom turns on. Figure 15. Power Cord Connection
iDEN MINI User’s Manual -22- 4. Command and Control through the Hyper Terminal 4.1 Setting for Command and Control through the Hyper Terminal Figure 16. Local connection to the iDEN MINI Step 1 Open My Network Places. Step 2 Push the right button of mouse and select the properties.
iDEN MINI User’s Manual -23- Step 3 Click the properties of TCP/IP. Step 4 Set the values and OK as the following. Close all windows.

Navigation menu