Qisda TZ901 E-reader User Manual

Qisda Corporation E-reader

User Manual.pdf

Jing Si E-Book Quick Start GuideTZ-901 E-ReaderEXXXX
TZ-901 Quick Start Guide2DRAFT v3DRAFT v3DRAFT v3DRAFT v3NOTES:• If any of the items is damaged or missing, contact your retailer.• Do not put your TZ-901 E-Reader in an environment with direct sunlight or with a temperature above 50oC. Doing so may damage your TZ901 E-Reader.• Refer to the user manual saved in your TZ-901 E-Reader for more information.Package contentsMicro USB cableTZ-901 E-Reader Power adapterQuick start guideJing Si E-BookTZ-901Leather holster Technical documentations and warranty card
DRAFT v3TZ-901 Quick Start Guide3DRAFT v3DRAFT v3DRAFT v3Getting to know your TZ901 E-ReaderTouch screen panel Previous/Scroll up buttonNext/Scroll down buttonHome buttonPower buttonTop viewFront view
TZ-901 Quick Start Guide4DRAFT v3DRAFT v3DRAFT v3DRAFT v3Bottom viewAudio speakersLeft viewVolume buttonSpeaker/Headset portmicroSD card slotmicro USB 2.0 portRight viewBattery charge indicator
DRAFT v3TZ-901 Quick Start Guide5DRAFT v3DRAFT v3DRAFT v3Charging your TZ-901 E-ReaderCharge your TZ-901 E-Reader for six (6) hours before using it in battery mode for the rst time.Connect the micro USB cable to the power adapter.Plug the micro USB connector into your TZ-901 E-Reader.Plug the power adapter into a grounded power outlet.To charge your TZ-901 E-Reader:
TZ-901 Quick Start Guide6DRAFT v3DRAFT v3DRAFT v3DRAFT v3Turning your TZ-901 E-Reader onTo turn your TZ-901 E-Reader on, press the power button for about three (3) seconds.NOTES:• To wake your TZ-901 E-Reader from standby mode, press the power button.• In the event that your TZ-901 E-Reader becomes unresponsive, press and hold the power button and the Home button at the same time to restart your TZ-901 E-Reader.
DRAFT v3TZ-901 Quick Start Guide7DRAFT v3DRAFT v3DRAFT v3Saving les in your TZ-901 E-ReaderNOTE: Your TZ-901 E-Reader supports e-books in ePub, PDF, CBZ, and TXT formats.IMPORTANT! To save audio les and book les, ensure that you save them in their corresponding folders. Save the audio les in audio folder and e-book les in book folder.To save les from your compter to your TZ-901 E-Reader:1. Plug the micro USB connector into your TZ-901 E-Reader.2. Plug the micro USB cable to your computer’s USB port.3. On your TZ-901 E-Reader, tap Connect to PC.4. On your computer, open Computer > TZ-901 then save your les in your TZ-901 E-Reader.
TZ-901 Quick Start Guide8DRAFT v3DRAFT v3DRAFT v3DRAFT v3Installing your TZ-901 E-Reader to the leather holsterTo install your TZ-901 E-Reader to the leather holster:3. Snap the lower end corners of the TZ-901 E-Reader to the leather holster’s holders in place.1. Open the bundled leather holster.holderholderholderholder2. Place the TZ-901 E-Reader facing up then insert and slide it to the leather holster until it ts to the holders, as shown.
DRAFT v3TZ-901 Quick Start Guide9DRAFT v3DRAFT v3DRAFT v3AppendicesFederal Communications Commission StatementThis device complies with FCC Rules Part 15. Operation is subject to the following two conditions:• This device may not cause harmful interference.• This device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by doing one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.
TZ-901 Quick Start Guide10DRAFT v3DRAFT v3DRAFT v3DRAFT v3• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Changes or modications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.RF Exposure Information (SAR)This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.The exposure standard employs a unit of measurement known as the Specic Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the EUT transmitting at the specied power level in dierent channels.
DRAFT v3TZ-901 Quick Start Guide11DRAFT v3DRAFT v3DRAFT v3The highest SAR value for the device as reported to the FCC is 1.27 W/kg when placed next to the body.The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on le with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: VRSTZ901.
TZ-901 Quick Start Guide12DRAFT v3DRAFT v3DRAFT v3

Navigation menu