QOMO HiteVision QRF900-TR1 Wireless QClick User Manual of QRF900

QOMO HiteVision, LLC. Wireless QClick of QRF900

UserManual.wiki >

QOMO HiteVision >

QRF900-TR1 User Manual >

User Manual

1. User Manual
2. user manual

User Manual

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 1

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 2 Table of Contents Part 1.QRF900 ARS Overview................................................................................................... 4Part 2.Hardware & System Installation Illustration.................................................................... 52.1Student Keypad................................................................................................................. 52.1.1Specifications.................................................................................................................... 52.1.2Illustration......................................................................................................................... 52.1.2.1Student Keypad Layout: ................................................................................................... 52.1.2.2Student Keypad Instruction: ............................................................................................. 62.2Instructor Keypad ........................................................................................................... 192.2.1Specifications..................................................................................................................192.2.2Illustration....................................................................................................................... 202.2.2.1Instructor Keypad Layout:.............................................................................................. 202.2.2.2Remote Mouse Keypad Definition:................................................................................ 212.2.2.3NoHost Screen................................................................................................................ 222.2.2.4Normal mode .................................................................................................................. 232.2.2.5Session Mode.................................................................................................................. 292.3Main Receiver and USB Cable....................................................................................... 382.3.1Specifications.............................................................................................................. 38392.3.2Illustration................................................................................................................... 38392.4Carrying Case ................................................................................................................. 39Part 3.Software.......................................................................................................................... 40Software Overview ....................................................................................................................... 40System Requirements.................................................................................................................... 40Installation..................................................................................................................................... 40Using the QClick Software........................................................................................................... 413.1Quiz Genius .................................................................................................................... 413.1.1The Normal Routine of Running a Quiz Genius:........................................................... 423.1.1.1Class:............................................................................................................................... 433.1.1.2Participation Mode: ........................................................................................................ 473.1.1.3Activity Modes: .............................................................................................................. 473.1.1.4Load:............................................................................................................................... 473.1.1.5Title................................................................................................................................. 483.1.1.6Run / Start a Quiz ........................................................................................................... 483.1.1.7Result and Report ........................................................................................................... 503.1.1.8Exit.................................................................................................................................. 523.1.2Activity Modes ............................................................................................................... 523.1.2.1Normal Quiz: .................................................................................................................. 523.1.2.2Paper Quiz: .....................................................................................................................523.1.2.3Homework: ..................................................................................................................... 523.1.2.4Rush Quiz: ......................................................................................................................533.1.2.5Elimination: ....................................................................................................................533.1.2.6Multiple Mode:............................................................................................................... 533.1.2.7Survey:............................................................................................................................ 533.1.2.8Vote: ............................................................................................................................... 533.1.2.9Roll Call:......................................................................................................................... 54

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 3 3.1.2.10Free Style Normal/Rush/Elimination: ............................................................................ 543.1.2.11Comparison of Mode Selections and Their Functions ................................................... 553.1.3Logon and Force Login .................................................................................................. 573.1.3.1Logon.............................................................................................................................. 573.1.3.2Force Login.....................................................................................................................573.2Exam Editor.................................................................................................................... 583.2.1Open:............................................................................................................................... 593.2.2New:................................................................................................................................ 593.2.3Templates:....................................................................................................................... 593.2.4Add: ................................................................................................................................ 593.2.5Del: ................................................................................................................................. 603.2.6Save: ............................................................................................................................... 603.2.7Close:.............................................................................................................................. 603.2.8PowerPoint Questions Setup........................................................................................... 603.2.9Standard Setup................................................................................................................ 633.2.10Question Modes.............................................................................................................. 643.2.11Answer Sheet Setup........................................................................................................ 643.3Template Design............................................................................................................. 653.3.1Open:............................................................................................................................... 663.3.2New:................................................................................................................................ 663.3.3Add: ................................................................................................................................ 663.3.4Del: ................................................................................................................................. 673.3.5Save: ............................................................................................................................... 673.3.6Close:.............................................................................................................................. 673.3.7Template Name:.............................................................................................................. 673.3.8Option Selection: ............................................................................................................ 673.4Reports............................................................................................................................ 673.4.1Reports............................................................................................................................ 683.4.1.1Reports............................................................................................................................ 683.4.1.2Subject Grade.................................................................................................................. 963.4.1.3Grade Book................................................................................................................... 1113.4.2Receive Session ............................................................................................................ 1173.5Settings ......................................................................................................................... 1183.5.1System: ......................................................................................................................... 1183.5.2Channel:........................................................................................................................ 1193.5.3Hardware Test:.............................................................................................................. 1203.5.4Database Management: ................................................................................................ 1213.5.4.1Database Backup: ......................................................................................................... 1213.5.4.2Database Recover: ........................................................................................................ 1213.5.4.3Clear Session: ............................................................................................................... 1213.5.4.4Del All Records: ........................................................................................................... 1223.5.5Login Setup:.................................................................................................................. 1223.5.6Version Info:................................................................................................................. 123

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 4 Part 1. QRF900 ARS Overview Thank you for purchasing the QRF900 Audience Response System (ARS). The QRF900 ARS uses a 2.4G RF technology to receive instant feedback from the participants (up to 400 persons) simultaneously. Working completely out of Microsoft PowerPoint, the QClick ARS software is easy to learn and easy to use. The quiz question and the answer can be easily and quickly created using built-in PowerPoint templates. In addition to PowerPoint, QClick software can load other non-PowerPoint quiz files such as Word documents, PDF’s, and Spreadsheets. Also, the software has been designed to directly load XLM quiz files (such as Exam View) with auto-conversion. Additionally, you can use hardcopy tests and have your students answer using the QClick ARS. Using QClick’s Free Style activity mode, instructors can start quizzes without pre planning. Questions can be instantly captured from your PC, the internet, a White Board, or from a lecture. The QClick ARS software has a built-in white board tool allowing you to draw and capture quiz materials easily. The QClick system is composed of hardware (instructor remote keypad, participants’ remote keypads, RF main receiver, and extended USB cable) and the QClick software. The instructor keypad incorporates a remote mouse and some PC keyboard functions allowing control of the slide selection as well as the software functions. Equipped with the enhanced main controller function, the instructor keypad incorporates the main control functionality allowing the instructor the freedom of not having to use a computer to conduct the tests. Before the quiz, the instructor downloads the class setup information into the instructor keypad; using only the instructor keypad, up to 8 sessions of quizzes may be given. After the quiz, the instructor uploads the test data into the QClick system database. The QRF900 is equipped with 6 line LCD display and a big non-volatile memory. Both the student and instructor keypads can be used in any class by simply logging into a class which the QClick will automatically search for and then offer the ability to register for the class. The QClick keypad also allows a student to ask a question by directly communicating to the instructor with one single key press. At the same time, an instructor can view each student’s exam performances and the exam statistical data on the remote LCD display without sharing the private student exam information with others. The non-volatile memory in the student remote keypad can store a whole semester’s homework and exam answers. Students can use the keypads to receive the homework assignment, do the homework from home, and then turn in the assignment in the class with just a simple key press. Each student keypad has one unique Student ID which can be easily set and reset by a manager or by a user. If a student keypad is lost or damaged, it can be replaced with any new keypad by just resetting its Student ID. The QRF900 ARS engages individual responses through these non-Free Style activities: Normal Quiz, Paper Quiz, Homework, Rush Quiz, Elimination, Survey, Vote, and Roll Call. Free Style activities include: Normal Quiz, Rush Quiz and Elimination. The QRF900 displays instant results in the form of a histogram and a score board after each question is completed. Note: The words Quiz and Exam are used interchangeably in many places in this document.

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 5 Part 2. Hardware & System Installation Illustration 2.1 Student Keypad 2.1.1 Specifications Dimensions (L× W× H): 126.85mm×52mm×25.46mm Keys: 21 Power required: 2 AA Batteries RF transmission distance: ~200 feet Battery life: 6 months to 1 year depending on usage Function: Transmit response signals 2.1.2 Illustration 2.1.2.1 Student Keypad Layout: 1. LCD 2. Power: Turns unit on and off 3. Left Soft Key: Confirms operation that appears on the bottom left of screen

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 6 4. Up Key: Scrolls the screen display up 5. Right Soft Key: Confirms an operation that appears on the bottom right of screen; When exiting from the answer screen during homework or paper quiz mode, this button is also used to enter into the function selection menu 6. Left Key: Scrolls to the left 7. OK/Menu Key: Confirms a selection or enters the main menu 8. Right Key: Scrolls to the right 9. Del Key: Deletes an exam during paper quiz or homework mode also used to backspace 10. Down Key: Scrolls down 11. Send Key: Sends response; also used as a shortcut key to register for a class 12. Choice Keys: Labeled “A1” to “J0” and “a” to “z” for alpha numeric inputs 13. Operation +/- /. Key: Used to enter the"+" sign, the "－" sign and the decimal point “.” sign 14. Shift Key: Toggles between upper and lower case letters during typewriting functions 15. Operation Key: Used to enter a space, the "/" sign and the decimal point “＊”sign 16. Alpha-Numeric Key: Toggles between multiple choice options, alphabet and numeric key functions 2.1.2.2 Student Keypad Instruction: 2.1.2.2.1 NoHost Screen: The following information is displayed on the NoHost screen: • RF Signal strength is displayed on the upper left corner • The battery indicator is displayed on the upper right corner • Student ID number and user name The following functions can be performed under this display: • Enter the main menu by pressing the “OK/Menu Key”. • Short cut key to register by pressing the “Send Key”. • Search classes by pressing the “Right Soft Key”.

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 7 2.1.2.2.2 Menu Screens: Operations under these menu displays: • Use the “Up Key” or “Down Key” to scroll through the selection of the menu items. The item selected will be highlighted. • Press the “OK/Menu Key” to select the menu item • To use the shortcut to select a menu item, press the “Choice Key” corresponding to the item number in front of the item. 2.1.2.2.3 Input Screens: Operations under these menu displays: The displayed cursor prompts the user to input characters or numbers. • The user can press the “Choice Keys” to enter the desired characters. • Pressing the “Del Key” will backup a space to remove the character previously entered. Pressing the “Send Key” will save or send a setting. Note: For the convenience of setting multiple fields, when you finish setting one field, and press the “OK/Menu Key”, the cursor will automatically advance to the next field. When a page is completed, the content of that page is automatically saved into the memory. If the input area is an alpha numeric type, there will be a or at the end of the line; these signs indicate whether the current input mode is alpha or numeric. • Use the “Alpha-Numeric Key” to toggle among the input modes. • Under the Homework menu and the Find-By-Title screen, the “Shift Key” is used to toggle between upper and lower case letters. 1A

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 8 2.1.2.2.4 Confirmation Screens: Operations under these menu displays: Note: Some operations require the user’s confirmation because these operations are not recoverable. For example, deletion of an exam is not recoverable. Once it is deleted, it is permanently removed. • Press the “Left Soft Key” to confirm an operation. • Press the “Right Soft Key” to cancel the current operation. 2.1.2.2.5 Connecting student keypads to a host: Operations under these menu displays: After a keypad is connected to a host receiver, students can: • Find and Register for a class • Begin an exam by pressing the Choice Keys to respond to the questions in the normal, rush and elimination activities. • Start receiving the test ID and the test titles in paper and homework activities. • Ask a question during the quiz. 2.1.2.2.6 Functions and Operations: (1) Setting the Student ID and the User Name: Note: Before logging in, a valid Student ID and user name (stored in the class database) must be set for each student keypad. To set a Student ID, follow these steps: 1. Under the NoHost screen, press the “OK/Menu Key” to enter into the main menu. 2. Select “4.SetStudentID” submenu. 3. Under the “SetStudentID” screen, enter a valid Student ID and then press the OK/Menu Key” to save it.

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 9 To set a user name, follow these steps: 1. Under the NoHost screen, press the “OK/Menu Key” to enter into the main menu. 2. Select “5.SetUserName” submenu. 3. Under the “SetUserName” screen, enter a valid user name and then press the OK/Menu Key” to save it. Note: All submenu items can be selected by directly pressing their corresponding item numbers displayed at the front of each item. (2) Finding classes: To find a class to log into, follow these steps: 1. Under the No Host screen, press the “OK/Menu Key” to enter to the main menu. 2. Select “1.GetClass” to find classes. OR 3. Under the NoHost screen, press the “Right Soft Key” to find classes. 4. After the search is finished, a list of classes will be displayed. The nearest class will be displayed on the top of list. Note: While the search is in progress, you may press any key to cancel the search. Note: Only classes entering into an exam status will be listed after the search is complete. Note: Previously logged in class names are saved in the keypad. To log into the previously logged in class, simply select the class name from the list. (3) Login to a class: After finding their class from the list displayed, students can login.

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 10 To login, follow these steps: 1. Under the NoHost screen, press the “Send Key” to log into the class you had logged into the last time. The name of the logged in class, the teacher’s name and the channel number will be displayed on the LCD screen. OR 2. Under the main menu, select “ClassList” to display the class list. Select a class and press the “OK/Menu Key” or “Left Soft Key” to login. After successfully logging in, the LCD login screen shows various displays according to the activity mode selected. These will be introduced in operation (4). Once the student has logged in, an assigned registration number will be displayed on the LCD screen. If the login fails, one of the following messages will be displayed: • “Failure!” Not able to connect to a host at this time. • “Wait to Start!” The exam is not ready to begin. • “Invalid ID!” The software is not able to recognize the student ID. Be sure your student keypad ID is listed in the class you have selected. (4) Operations after your successfully login: One of the following LCD screens will display according to the activity mode: a) Normal Exam Screen: This screen is based upon the activity modes: Normal Quiz, Rush Quiz, Elimination, Multiple Mode, Survey and Vote selected by the instructor.

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 11 Under the Normal Exam screen, the following functions can be performed: • When the exam begins, the screen will display the titles automatically. • Enter your answer by pressing the “Choice Keys” and then press the “OK/Menu Key” to send your answer. A message will be displayed to acknowledge the operation. The student responses will be displayed on the individual student screen for reference. Note: The function of “Send Key” is re-registration. • To ask a question, press the “Left Key” to enter into the “Raise Your Hand Display”, and then press the “OK/Menu Key”. The software will display a marker at the bottom of the main exam question display window for the instructor’s attention. The instructor may look on his or her keypad LCD screen to view the student asking the question. • Press the “Send Key” to re-register if the software is logged out. For example, if you choose to logout to see another part of the keypad menu setting and then choose to return to the quiz, you will need to re-register into the quiz. • Press the “Right Soft Key” if you want to exit the exam. The keypad will prompt you for confirmation. Press the “OK/Menu Key” to confirm the exit or press the “Right Soft Key” to cancel the operation and return to the previous display. If the “OK/Menu Key” is pressed, the keypad will display the NoHost screen. b) Paper Quiz Screen: This applies when the instructor has selected the Paper Quiz and Homework activity modes. There are two applications for the Paper Quiz Screen: 1) If the test ID selected for the quiz is already saved in the student keypad, the test title name with the test ID will display on the screen. The student can start the exam by selecting the test.

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 12 2) If the test ID selected for the quiz is not saved in the student keypad, the creating a new test screen will display. Only the test title can be modified on this screen. Press the “Left Soft Key” to start the exam. The following functions can be performed in the Paper Quiz Screen: • Enter your answers by pressing the “Choice Keys”. • Press the “OK/Menu Key” or the “Down Key” to save the answer to your keypad. The cursor will advance to the next question. Going to the next page, the previous page answers have been saved to the student keypad. • Select the receive option, when the teacher presses the Send Question Key. Then the screen will display the titles. • Use the “Del Key” to delete the inputs if an answer needs to be modified. • Press the “Right Soft Key” to enter into the paper quiz menu. Select a menu item and press the “OK/Menu Key” to confirm the operation.

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 13 c) Rush Quiz and Roll Call Screen: This applies when the instructor has selected the Rush Quiz (left picture) and Roll Call (right picture) activity modes. In the Rush Quiz and Roll Call Screens, the following functions can be performed: • Press any key (except “Up Key”, “Down Key”, and “Right Soft Key”) to respond to the Rush Quiz or Roll Call. If it is in Rush Quiz, the Normal Exam Screen will be displayed to allow a student to submit an answer. After the answer has been sent, the display will return to the Rush Quiz or the Roll Call Screen. • If you want to ask a question, press the “Up Key” to enter the “Raise Your Hand Screen” and then press the “OK/Menu Key”. The software screen will display a marker at the bottom of the main question screen to alert the instructor. The names of students who are asking questions can be displayed on the instructor’s keypad screen. • Press the “Down Key” to reregister the class.

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 14 • Press the “Right Soft Key” to exit the exam. You will be prompted for confirmation. Press the “OK/Menu Key” to exit the current exam or the “Right Soft Key” to cancel the operation and return to the previous screen. If “OK/Menu Key” is pressed, the keypad will display the NoHost screen. 2.1.2.2.7 Homework Mode: To use the student keypad for homework management, follow these steps: Under the main menu, select “3.ExamList” to enter into the Homework submenu． The Homework submenu consists of the following items: • ID & Title List: All tests saved in the student keypad will be displayed when the item ID & Title List is selected. Each line corresponds to one test. Press the “Alpha-Numeric Key” to toggle displays between test names and test IDs. Use the “Up Key” or “Down Key” to select the desired test. Selected tests will be highlighted. Press the “OK/Menu Key” to go to the homework Screen; Press the “Del Key” if you want to delete the test. • FindByExamID: The TestId Search screen will be displayed when the item FindByExamID is selected. Enter a test ID number to find a test. After entering the test ID number, press the “OK/Menu Key” to start searching. If there is a match, a listing of matched tests will be display. Otherwise, an error message will be displayed. Only a numeric ID number can be entered. Use the “Del Key” to modify the input. • FindByTitle: The Title Search screen will be displayed when the item FindByTitle is selected. Enter a test title to search. There is no need to enter the complete title name. All close matches will be displayed on the test list screen. For example, if you only enter letter ‘A’, all tests with a test title starting with letter ‘A’ will be listed. Note: Alphabet is provided on screen. Use the “Up Key” or “Down Key” to select a character, and use the “Alpha-Numeric Key” and “Shift Key” to switch case. After selecting a character, press the “OK/Menu Key” to enter the selection. Press the “OK/Menu Key” to start your search. Use the “Del Key” to modify your inputs. • BeginNewExam: Selecting the item BeginNewExam will allow you to create a new test answer frame. Once a frame is created, it can be used to store answers.

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 15 To create a new test answer frame, follow these steps: 1) “Exam Id:” This item will be used to match the Test taken when the homework is submitted and the ID is also used for identification when searching for a test later. The ID will be assigned if the Test is in electronic format which is delivered through the software when you choose the Homework or Paper Mode. If a test is distributed in paper format, the Test ID will be assigned by the instructor and the ID will be entered manually by the students using their keypads. 2) “Question Number:” This refers to the number of questions. This item will allow us to determine how many questions are in a test. The number of questions will be assigned if the Test is in electronic format, delivered through the Software when you choose the Homework or Paper Mode. If the Test is distributed in paper format, the number of questions will need to be filled in by the students to match the total number of questions assigned in the paper. 3) “Exam Name:” It is used for easily locating a test later. The QClick Software does not use this information. Therefore, it can be assigned by students to any easily remembered text title. 4) When these settings are complete, press the “OK/Menu Key”. The homework question screen will be displayed. Press the “Right Soft Key”, to return to the previous menu. 5) You may start to work on the questions and save the answers to the keypad and then submit them next day in the class; or just save the question frames to work on later. 2.1.2.2.8 Student’s keypad special functions: (1) Hardware Test

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 16 Using the student keypad for a hardware test, follow these steps: 1. The QClick software must be in the hardware test mode in order to test the student keypad hardware. Refer to Part 3. Software in session 3.5.3 Hardware test. 2. Under the main menu, select item “6.HardwareTest” submenu to enter into the Hardware test screen display. 3. Enter the channel number, which is the same as the host machine’s channel number selected by the PC software. 4. Press the “OK/Menu Key”. If the channel number matches the host receiver channel number, the PC software will display the student’s keypad ID on a row in a first come first serve order. Additionally, the register number is also displayed on this test screen in the keypad. Otherwise, the failure error message will be displayed on the top of this test screen in the keypad. (2) Student keypad factory settings: WARNING: Using this function will clear all user data stored, including all the test answers in this keypad. It is NOT recoverable. Sometimes it is convenient to clear all data stored in the keypad. This can be done by simply restoring the factory settings. This is especially useful when you want to trade in your keypad. To use the factory settings for the student keypad, follow these steps: 1. Under the main menu, select item “7.Settings” to enter into the Hardware submenu. 2. Under the Setting submenu, select “5.DefaultSet” submenu in order to restore the factory settings. 3. Press the “OK/Menu Key” to confirm the operation. 4. Follow the screen prompt, and press the menu key to double confirm the setting. 2.1.2.2.9 Student keypad sleep mode: In order to increase the battery life of the response pads, a sleep mode has been implemented in the student keypad. To use the sleep mode settings for the student keypad, follow these steps: 1. Under the main menu, select item “7.Setting” to enter into the Hardware submenu. 2. Under the Hardware submenu, select “3.ScreenSaver” submenu in order to set how long to enter the sleep mode. 3. Press the “Up/Down Key” to select minute adjust the time. 4. Press the OK/Menu Key to confirm the setting.

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 17 After the minutes you set without any interaction, the keypad will enter into a sleep mode which will shut down the screen’s display. The user can press any key to wake up the keypad and return to the previous display. 2.1.2.2.10 Routine steps using the student keypad: • Taking a quiz with the pace controlled by the instructor Student Keypad Operation Form Form Class Status Is the Student ID in the class list? Actions Result 1 Offline (No class selected) N/A All Actions No Host Display 2 Class selected but the quiz has not started. N/A Finding a class Found the class with the class name and the teacher name. 3 Class selected but the quiz has not started. N/A Joining the classReceives message “Wait to Start” 4 The quiz is loaded and ready to begin but the timer has not started. No Joining the classReceives message “Invalid ID” and the software will display Force Login window. 5 The quiz is loaded and ready to begin but the timer has not started. Yes Joining the classRegistered for the class and receives the register number. The LCD displays the register screen. 6 The quiz is loaded and ready but the timer has not started. The student keypad joined the class previously. Yes Power Up Registered for the class and receives the register number. The LCD displays the register screen.

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 18 7 The quiz is loaded and ready but the timer has not started. The student keypad not previously used for this test. Yes Power Up No Host Display, need to search for the class and register. 8 The quiz is loaded and ready but the timer has not started. Yes Enter and send the answer Receives the message “Wait to Start” 9 The quiz is loaded and running, the timer started. The student keypad joined the class previously. Yes Power Up Registered for the class and received the register number. The LCD displays the register screen. 10 The quiz is loaded and running and the timer started. Yes Enter and send the answer Displays “Success!” message. Note: Before using your student keypad to join a quiz with the pace controlled by the instructor, you should understand the function operation from using this table. To join a quiz, follow these steps: a) Turn on the keypad power. If the system is at 6 and 9, in the operation form you don’t need to do anything. b) If you did not join the class previously, you may have to search for the current class and register for the class. c) If you joined the current class previously, you may simply press the Send Key to get a short cut to directly register for the class. d) If your keypad ID is not listed in the current class, you may need to set your keypad ID to the one listed in the class, or try to force a login. The instructor will decide to allow you to participate. e) After you registered the class, follow the instructor’s quiz pace. • Attending a quiz with self controlled pace Note: Before using your student keypad to join a quiz using the self controlled pace, you should understand the function operation form on the above table before you can begin your quiz. To join the quiz, follow these steps:

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 19 1. If you didn’t join the class previously, you may have to search for the current class and then register and join the class. 2. If you joined the current class previously, simply press the Send Key to get a short cut to directly register for the class. 3. If your keypad ID is not listed in the current class, you will need to set your keypad ID to the one listed in the class, or try to force a login. The instructor will choose to allow your participation. 4. You can begin to answer the questions at your own pace, using the Up Key/Down Key to scroll up and down the questions. Use the OK/Menu Key to save your answers into the keypad. 5. After your have finished, press the Right Soft Key and select “Send Answer” to turn in your answer. 2.2 Instructor Keypad 2.2.1 Specifications Dimension (L × W × H): 126.85mm*52mm*25.46mm Keys: 21 Power required: 2 AA Batteries RF transmission distance: ~200 feet Battery life: 6 months to 1 year depending on use (Not including laser pointer use and session mode use) Function: Instructor/Presenter

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 20 2.2.2 Illustration 2.2.2.1 Instructor Keypad Layout: 1. LCD 2. Power: Turns unit on and off 3. Left Soft Key: Confirms an operation that appears on the bottom left of the screen 4. Up Key: Scrolls screen display up 5. Right Soft Key: Confirms an operation that appears on the bottom right of the screen. 6. Left Key: Moves cursor to the left 7. OK/Menu Key: Confirms a selection or enters the Main Menu 8. Right Key: Moves cursor to the right, views the list of students who have questions, or logs you back into a class 9. Laser pointer Key: Presses and holds to activate laser pointer 10. Down Key: Scrolls screen display down 11. Del Key: Delete and backspace 12. Mouse Key: In Normal Mode: Used to toggle between the mouse and keypad control

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 21 In Session Mode: Displays student information 13. View Key: In Normal Mode: Displays student records In Session Mode: Displays current question and correct answer 14. Question Key: Displays the names of students who have a question 15. Start/Pause Key: Starts and pauses 16. Stop Key: Stops current activity 17. Slide Up Key: Displays previous PowerPoint slide or previous question, also used as a page up key 18. Result Key: Displays histogram of results 19. Report Key: Displays Score Board 20. Slide Down Key: Advances PowerPoint slide, displays next questions, and is also used as a page down key 21. F1 Key: Function key and toggles between upper and lower case letters during typewriting function 22. F2 Key: Function key also used to enter the following characters: space, "/", and the decimal point “.” sign 23. ESC Key: Escape or exit an exam and toggle among multiple choice inputs, alphabet and numeric key functions 24. Choice Keys: Labeled “0” to “9” and “a” to “z” for alpha numeric inputs 2.2.2.2 Remote Mouse Keypad Definition: 1. Up Key: Moves cursor up 2. Laser pointer Key: Presses and holds to activate laser pointer 3. Left Key: Moves cursor left 4. OK/Menu Key: Mouse double-click 5. Right Key: Moves cursor to the right 6. Right Soft Key: Mouse right-click 7. Down Key: Moves cursor down 8. Left Soft Key : Mouse left-click 9. Mouse Key: Toggles between the mouse and keypad control 10. Question Key: Mouse left-click hold 11. View Key: “Tab key” PC keyboard 12. Slide Up Key: “Page Up Key” PC keyboard 13. Stop Key: “Enter Key” PC keyboard

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 22 14. Start/Pause/Login Key: “Up Key” PC keyboard 15. Result Key: “Left Key” PC keyboard 16. Report Key: “Right Key” PC keyboard 17. Slide Down Key: “Page Down Key” PC keyboard 18. F1 Key: “Down Key” PC keyboard 19. F2 Key: Free Style cut picture function key 20. ESC Key: “ESC Key” PC keyboard 2.2.2.3 NoHost Screen The instructor keypad works both in the normal mode and in the session mode. Press the Up/Down Key to select either the normal or session mode. Press the OK/Menu Key to enter the mode you desired. 2.2.2.3.1 NoHost screen display: The following information will display on this screen: • Signal strength is displayed in the upper left corner. • Battery remaining indicator is displayed in the upper right corner. • The instructor’s name and the class name last logged in. • Press the Up/Down Key to select to enter Normal/Session mode. The following functions can be performed under this screen: • Press the OK/Menu Key to enter the main menu of your desired mode． • Press the Right Key to log in to the previous class selected. • Press the Right Soft Key to search for an existing class. •

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 23 2.2.2.3.2 Operation mode selection screens display: Use the Up Key or Down Key to select the normal mode or session mode. The normal mode is used for the normal quiz selection. To conduct the normal quiz session, the needed hardware will include the instructor keypad, student keypads, the main receiver, PC and a display device. The session mode is used for conducting quiz sessions just using the instructor keypad and student keypad. The main receiver, PC and the display device are not needed for conducting this quiz session. 2.2.2.4 Normal mode 2.2.2.4.1 Normal mode menu display: Operations available under these menu screens: • Use the Up Key or Down Key to scroll up or down the selection. • Press the OK/Menu Key to select the submenu and the keypad will go to the screen or the submenu.

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 24 2.2.2.4.2 Input screen display: Operations available under the input menu screen: Note: The displayed cursor highlighted indicates that the user can input characters. • User can use the Up Key, Down Key, Left Key or Right Key to move the cursor to select the desired character or number from the list of valid characters or numbers display. • Press the Left Soft Key to enter the selection. • Pressing the Del Key will backspace and remove any entered characters。 • Pressing the Right Soft Key revert to the menu one level up. • Press OK/Menu Key to select the answer, and press the Left Soft Key to save the question setting. 2.2.2.4.3 Connecting the instructor’s keypad to the host receiver: To connect the instructor keypad to the host receiver, follow these steps: (1) Finding classes Follow these steps to find classes: a) Under the NoHost screen, cursor removes on the normal mode and press the OK/Menu Key to find a list of all classes. OR b) Select the normal mode and press the OK/Menu Key under the NoHost Screen to enter into the main menu. Then select “2.FindingClass” to start searching. c) A list of classes will be displayed and the nearest class will be listed on the top. Note: When the search is in progress, pressing any key will cancel the search. Note: Unlike the student keypad, the instructor keypad can search for a class once the host has communicated with the PC software. The instructor’s keypad will be notified if no class and/or no exam has been selected or loaded. Note: The instructor keypad can logon to any class previously logged into.

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 25 (2) Login to a class: After finding a class, follow these steps to login: a) Under the NoHost screen, press the Right Key to login to any class logged into previously. There is a list of classes logged into previously stored in the keypad. OR b) Select the normal mode and press the OK/Menu Key under the NoHost Screen to enter into the main menu, and then select the item ClassList. The previously logged in class list will be displayed. Move the highlight to select the class desired into the Class Info screen, and then press the OK/Menu Key to log in. OR c) After finishing the class search, move the highlighted item to select a class from the list to enter into the ClassInfo screen, and then press the OK/Menu Key to log in. After logging in, the following information will be displayed on the instructor keypad screen:

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 26 • The selected activity mode • The selected class name • The instructor name • The number of registered student key pads over the number of total students in the class. 2.2.2.4.4 Functions after login: The following functions are available once the Instructor keypad is logged in: λ The displayed PowerPoint slides can be selected up or down by pressing the Slide Up Key or Slide Down Key. λ An exam can be started, paused, or stopped by pressing the Start/Pause Key or Stop Key. λ Exit an exam by pressing the ESC Key. λ View the histogram of the current question or an instant report by question shown on the screen by pressing the Result Key or Report Key. λ View an individual student’s exam performance in the keypad screen. 1. Press the View Key to view a list of the students, and then use the Up Key or Down Key to scroll through the list of students and then press the OK/Menu Key to select the desired student. OR 2. On the current screen, press the OK/Menu Key to enter into the network function menu. Go to the sub screen which will display a list of the student names by selecting “ExamReport”. Find and select the desired student and then press the OK/Menu Key to view the results. Only the current question/answer from the exam will be displayed for the student selected. Note: Under the student list display, press the OK/Menu Key to toggle the display between the

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 27 student name and the answer report. Note: A message will be displayed if the student list is empty λ View the histogram of the current question and grade in the instructor keypad. On the currently displayed screen, press the “OK/Menu Key” to enter into the Network Function menu. Select “ExamResult” to display the histogram. Note: This function only applies to the Normal Quiz and Elimination activity mode. λ Respond to student’s questions: View the name of the student who has a question: 1. On the currently displayed screen, press the Question Key which will display a list of the students who have a question. OR 2. On the currently displayed screen, press the OK/Menu Key to enter into the network function menu. Select the item “HandraiseList” to view the list of students who have questions. Note: After responding to the student’s request, select the student name and press the OK/Menu Key to remove the student from the list. λ Set up an instant question:

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 28 The Free Style mode is the only one allowing an instant question: 1. On the currently displayed screen, press the OK/Menu Key to enter into the network function menu. Select “SetQuestion” to view the question type list. 2. Select a question type from the list and then press the OK/Menu Key to go into the setting answer screen. 3. In the item “Option Sum:” enter the total number of choices for this question and in the item “Answers:” enter the correct answer for the question. 4. Use the Up Key or Down Key, and Left Key or Right Key to select the desired characters or numbers. 5. Press the OK/Menu Key to input the selection. After entering the information, press the Left Soft Key to send. The test will start automatically once the information is successfully sent and received. 2.2.2.4.5 Instructor keypad in sleep mode: In order to extend the life of the battery, a sleep mode has been implemented. To use the sleep mode settings for the instructor keypad, follow these steps: 1. Under the main menu, select item “4.Setting” to enter into the Hardware submenu. 2. Under the Hardware submenu, select “3.ScreenSaver” submenu in order to set how long to enter the sleep mode. 3. Press the “Up/Down Key” to select to adjust minute.

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 29 4. Press the OK/Menu Key to confirm the setting. After the minutes you set without any interaction, the keypad will enter into a sleep mode which will shut down the screen’s display. The user can press any key to wake up the keypad and return to the previous display. 2.2.2.5 Session Mode This mode needs to use more power. When the power is sufficient, it only can last about 35 hours. In the instructor keypad session mode, the instructor’s keypad will act as the main receiver, working as the host to directly receive the student keypad responses in a quiz session. Before the instructor keypad can be used to conduct a quiz session, download at least one class setting with the student information and at least one set of the quiz question correct answers into the instructor’s keypad. The session mode has these functions: • Begin Session • loading Info • Class List • Answer Sheet List • Session List 2.2.2.5.1 Begin Session: At least one class must be loaded in the instructor keypad before using the Begin Session function. If you choose the No Free Style mode, at least one set of answer must be loaded in the keypad. It is not necessary to have the correct answers ready when choosing the Free Style mode. To conduct a quiz in the session mode, follow these steps:

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 30 Note: No main receiver or a PC is needed for conducting a session in this mode. 1. Select the session mode in the instructor keypad. 2. Select the function Begin Session. If the keypad has reached maximum storage, you must purge some of the existing data. Refer to session 2.2.2.4.6 Session List for detailed instructions. Note: Before purging data, make sure you have uploaded the session into the QClick database system. Otherwise, the session data will not be recovered after the purging. The LCD screen will display a list of classes previously loaded. Select the desired class by pressing the OK/Menu Key. If there are no classes loaded in the keypad, the screen will display “NoClasslist!” Once you have successfully selected a class, choose an activity mode from the list displayed on the LCD screen. 1. If you choose one of the Free Style activities, which include FreeNormal, FreeRush and FreeEliminate, you will not need to load an answer sheet prior to conducting the quiz. However, if you choose one of the No Free Style activities, then you must select a set of correct answers. If no answers are loaded in the instructor’s keypad, the LCD screen will display this message “NoAnwerSheet!”

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 31 2. Once you choose the No Free Style activity mode, the LCD screen will display a list of the answer sheets. Select the answer sheet desired by pressing the OK/Menu Key. The keypad will enter into the quiz session and display the activity mode and teacher name on the LCD screen. 3. If you choose the Free Style Activity mode, there is no need for an answer sheet. The correct answer for each question is entered by the instructor after each question response is finished. 4. Under No Free Style Activity mode, you can set the titles displaying on the individual student screen. Follow these steps: (1) Under the activity mode, enter the menu, and then choose the SendOption Key (2) If you select YES, the student keypad will display the title when the exam begins. Press the Left Soft Key to confirm the operation, (3) Then you can choose ViewQuestions BrowseSubject to see the title. 5. Press the Start/Pause Key to start or pause a session. When the session starts, the time set for each question will be displayed on the screen. You may increase or decrease the test time by pressing the Up Key or Down Key. Each key press will increase or decrease the time by 5 seconds. Press the Stop Key to stop the current question response. Use the Slide

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 32 Up Key or Slide Down Key to go to the previous or next question. 6. Press the Left Soft Key to complete the current session. The control keys function in the session saving are: OK/Menu Key – Enter the test ID, test title, or session name Right Soft Key – Return menu one level up Del Key – Delete a numeric number or a character Left Soft Key – Select the numeric number or characters Shift Key –Toggles between upper and lower case letters during typewriting function If you have chosen the Free Style Mode, use the control keys to enter the numeric test ID first and then press the OK/Menu Key to input. The cursor will move to the test title enter area. Use the control keys to enter the test title; when completed, press the OK/Menu Key to input. The keypad will advance to display the session name screen. Enter the session name and then press the OK/Menu Key to input. If you have chosen the No Free Style Mode, the keypad will advance to the session name screen directly without prompting you to input the test ID and test title. If you don’t want to save the session, press the Right Soft Key to exit. When you press the OK/Menu Key and leave the required area blank, it will force you to exit the session saving. In both situations, the keypad will prompt you for confirmation. Press the OK/Menu Key to confirm the cancellation or press the Right Soft Key to return to the saving screen. Control Functions for Conducting a Session:

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 33 This display shows a Rush Quiz session example. There are a total of 6 questions and the keypad is currently on question 1. No students have registered for the selected class and there is 34 students in this class. The third line shows the testing time in seconds. These functions can be operated under the activity display: Press the OK/Menu Key to enter the main menu for the control function selection for this session. Press the Report Key to view the current list of registered students. Press the Question Key to view the list of students who have raised questions. Press the View Key to view the current question correct answer. S -- the single choice question; M -- the multiple choice question; C – the cloze question;O -- other

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 34 type of question. Press the Start/Pause Key to start/pause the test timer. Whether the timer works, you can press the Up Key or Down Key to increase or decrease the time by 5 seconds. Press the Stop Key to stop the timer. Press the Slide Up/Down Key to select the previous or next question. Press the Report Key to view the answers of a registered student for the current question. Note: This funciton is only active when the timer is stopped. Press the Right Soft Key to exit the session. Assigning or receiving function for the homework mode. Before pressing the Start/Pause Key, the session homework mode stays in the Assigning homework mode. After pressing the Start/Pause Key the session is in the Receiving homework mode. 2.2.2.5.2 Loading Information 2.2.2.5.2.1 Download students information To download the students’ information, follow these steps: Note: In the QClick software, a class should be selected and an answer sheet or PowerPoint which contains the answer information should be loaded and started. 1. Plug in the main receiver to the PC USB port. 2. In the QClick software select a Class and then select the Paper Quiz activity mode, Refer to Part 3 Software session 3.1.1.1 Class and session 3.1.2.2 Paper Quiz for detailed instruction.

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 35 3. Select the session mode in the instructor keypad. 4. Select the Loading Info function. The instructor keypad will automatically begin searching for the available classes. Select the desired class. Note: While loading the class information and the answer sheets, keep the main receiver plugged in. 5. Select LoadStudentInfo and load the class and student information into the instructor’s keypad. 6. The instructor’s keypad can store up to 8 classes. If the keypad has reached its maximum storage, the LoadStudentInfo will not operate. You will need to go to the function ClassList and delete some classes to allow more storage before you can continue. Refer to session 2.2.2.5.3 Class List for detailed instruction. 2.2.2.5.2.2Downloadexaminformation To download the exam information, follow these steps: 1. Go to the Loading Info selection screen. 2. Select the function LoadExamInfo to start loading the answer sheet into the instructor’s keypad. 3. The instructor’s keypad can store up to 8 answer sheets. If the keypad has reached its maximum storage, the LoadExamInfo will not operate. You will need to go to the function AnswerShtList and delete some of the answer sheets to allow more storage capacity. Refer to session 2.2.2.5.4 AnswerShtList for detailed instructions. 4. The display will remind the instructor to load an answer sheet and start the Paper Quiz session in the QClick software. Refer to Part 3 Software; session 3.1.2.2 Paper Quiz. Click the OK/Menu Key on the keypad to confirm the answer sheet has been loaded or click Right Soft Key to cancel the loading. 2.2.2.5.2.3DownloadAllInformation:If you want to load both students and exam information at the same time, follow these steps: 1. Go to the Loading Info selection screen. 2. Select the function LoadAllInfo to start loading the student and answer sheet into the instructor’s keypad. 3. The instructor’s keypad can store up to 8 classes and 8 answer sheets. If the keypad has reached its maximum storage, the LoadAllInfo will not operate. You should delete the class and the answer sheet you stored. Refer to session 2.2.2.4.4 Class List and session 3.1.2.2 Paper Quiz for detailed instruction. 2.2.2.5.2.4 Up load session

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 36 To upload the session data, follow these steps: (You must have at least one stored session to upload) Note: The main receiver and a PC are needed for uploading the session data 1. Plug the main receiver into a PC. 2. Set the QClick software to the Receiving Session Data mode. Refer to Part 3 Software, 3.4.2 Receive Session for detailed instruction. 3. Select the session mode in the instructor keypad. Go to the Loading Info selection screen. Then select the function Upload Session. 4. The LCD screen will display a list of available sessions. 5. Select the desired session and press the OK/Menu Key. 6. The LCD will display the selected information. Click the OK/Menu Key to confirm or click the Right Soft Key to quit uploading. After successfully uploading, the session data will not be purged. To purge the session data, go to the function Session List. 2.2.2.5.3 Class List: The Class List function provides the list of classes which have been downloaded into the instructor keypad as well as the selection of classes you desire to delete from the keypad memory in order to make room for downloading new classes. The maximum number of classes the instructor keypad can store is 8. To view and delete a class from the class list, follow these steps:

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 37 1. Select the session mode in the instructor keypad, and then select the function Class List. 2. The classes which have been downloaded in the keypad will be displayed on the LCD screen. Use the Up/Down Key to scroll through the selections. Press the Del Key and then press OK/Menu Key to delete the selected class. Press the Right Soft Key to return to the session mode main menu. If you press the Del Key to delete the selection, the keypad will prompt you for confirmation. Press the OK /Menu Key to confirm the deletion or press the Right Soft Key to cancel the deletion. After the operation, the keypad will display the previous class list menu. 2.2.2.5.4 Answer Sheet List: The Answer Sheet List function provides the list of answer sheets which have been downloaded into the instructor keypad and the selection of answer sheets that you desire to delete from the keypad memory in order to make room for downloading new answer sheets. The maximum number of answer sheets the instructor keypad can store is 8. To view and to delete an answer sheet from the answer sheet list, follow these steps: 1. Select the session mode in the instructor keypad, and then select the Answer Sheet List function. 2. The answer sheets which have been downloaded in the keypad will be displayed on the LCD screen. Use the Up/Down Key to scroll through the selections. Press the Del Key to delete the selected answer sheet and then press the OK/Menu Key to confirm the operation. Press the Right Soft Key to return to the session mode main menu. If you press the Del Key to delete the selection, the keypad will prompt you for confirmation. Press the OK/Menu Key to confirm the deletion or press the Right Soft Key to cancel the deletion. After the operation, the keypad will display the previous class list menu.

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 38 2.2.2.5.5 Session List: The Session List function provides the list of sessions which have been conducted and stored in the instructor keypad and the selection of session’s data you desire to delete from the keypad memory in order to make room for storing new session data. The maximum number of sessions the instructor keypad can store is 8. If all storage is used, you will not be able to conduct a session using the session mode. To view and delete session data from the session list, follow these steps: Note: Before purging a session data, make sure that you have uploaded the session into the QClick database system; otherwise, the session data will not be recovered after purging. 1. Select the session mode in the instructor keypad, and then select the Session List function. 2. The sessions which have been stored in the keypad will be displayed on the LCD screen. Use the Up/Down Key to scroll through the selections. Press the OK/Menu Key to delete the selected session. Press the Right Soft Key to return to the session mode main menu. If you press the Del Key to delete the selection, the keypad will prompt you for confirmation. Press the OK/Menu Key to confirm the deletion or press the Right Soft Key to cancel the deletion. After the operation, the keypad will display the previous class list menu. 2.3 Main Receiver and USB Cable The main receiver is used to send and receive signals to and from the remote keypads and to exchange data with the host computer. The main receiver can be plugged into a computer’s USB port or connected to a computer through a USB cable. 2.3.1 Specifications Dimensions (L × W × H) 87mm ×24.55mm ×10mm Weight: 9 0z Operating Temperature: 0-104 degree F Operating Relative Humidity: 0-90% Transmitting and receiving distance: ~200 feet radial 2.3.2 Illustration[li rong1] 1- Antenna Terminal. 2- Power light (Signal light): Illuminates red when the main receiver is plugged into the USB port of a computer. The flashing red light indicates the main receiver is receiving and processing the data. 3- Antenna: picks up a weak signal to extend the RF transmitting distance. 4- Extension USB: extends the connection between the main receiver and the computer.

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 39 2.4 Carrying Case[li rong2] Holds the student remotes, instructor remote, receiver, software disk, and cables

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 40 Part 3. Software Software Overview The QClick Software has 5 main sections: Quiz Genius, Exam Editor, Template Design, Reports and Settings. The Quiz Genius allows you to set up classes, to conduct quizzes, games, take a survey and vote. The Exam Editor allows the creation and editing of the PowerPoint exam slides and the selection of the slide question answers. It can also be used for creating and editing answer sheets for examinations without using PowerPoint files. The Template Design allows for designing and editing the user test templates. The Reports Section allows you to query or modify quiz session data results, grade tests and generate the student performance reports. It also allows you to create the student session data not obtained from using the QClick hardware system. The other function of Reports is used for generating subject grade books and final report cards. The Settings section is designed for system set up. Click on hardware testing for setting the channel number of the QClick receiver(s), managing the system database, system administration set up and for displaying the hardware and software version information. System Requirements PC with Intel Pentium 4 or higher processor and with at least one USB port Minimum 512 MB RAM Minimum 200 MB of hard drive space for software Microsoft Windows XP/Vista Microsoft Office 2003 or higher (The security level of PowerPoint should be set to “medium”) Screen resolution of 1024x768 or higher Display system such as a data projector, Liquid Crystal Display (LCD), Plasma, or TV (recommended, but not required) Installation 1. Place the software disk into your computer CD drive. 2. Open the disk and double click on the “QClick.exe” file in the root directory. 3. Follow the instructions displayed during the installation. If the program has been previously installed, we suggest you remove the older version of the

$Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 41 program prior to installing the new program. The default installation path is : C:\QOMO, and will produce one shortcut icon on the desktop: QClick. Using the QClick Software 3.1 Quiz Genius Note: One PPT file = one quiz paper One slide = one question Run the QClick program by double clicking the QClick icon on the desktop. If the QRF900 receiver is plugged into the USB port, the software will automatically switch to QRF900 software. Otherwise, the software will prompt you from a system selection window. You may plug the QRF900 main receiver into the USB port at this time. The software will automatically switch to QRF900 system and display the logon window. If you don’t have the hardware, but would like to practice using the QRF900 software system, you may select the system QRF900 from the system selection drop-down menu. Next, logon to the QClick system by typing the user name and the password. The software sets the default login user name to “qomo” and the password is also “qomo”. If you do not want to logon the system, click the Cancel button. The software will allow you to do some limited operations, however the system database will not be updated. Note: The QClick software monitors the QRF900 main receiver plug-in status all the time. It will either display “QRF900 No Host” for Offline and “QRF900 Connected” for Online. Once the application is running, the software displays the following control Tab windows, Quiz Genius, Exam Editor, Template design, Reports, and Settings on the top of the screen. The active default Tab is set to Quiz Genius. Before conducting a quiz, you need to set up a class. If the class information is not available at this time but if you intend to use the system casually, you may choose some software preset examples for classes, subjects and teachers. The student roster table always goes with the class selection. The roster includes the student ID number, name and grouping information. The student profile is$

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 42 embedded under the student record. 3.1.1 The Normal Routine of Running a Quiz Genius: To set up a quiz genius, follow these steps: 1. Set up a class by clicking the Class icon, refer to session 1.1.1 Class for detail set up. 2. Select a participation mode from the Participate Mode drop-down menu. 3. You may choose the free style by checking or un-checking the Free Style check box ; 4. Load an exam file, or an answer sheet, by clicking the Load icon which will display the browser; 5. You may change the test ID by clicking the Title icon and set the change or use the system default ID number; refer to session 1.1.5 Title. 6. Click the Run icon to start the quiz, refer to session 1.1.6 Run /Start a Quiz. Depending on your selection, not all of these steps are necessary. The following table shows the relationship: Free Style Activity Mode Type of File Loaded Title & Test ID Need to Load an Answer Sheet Before Test? Need Answers After Each Question? Need Answers After the Whole Test is completed? No Normal, Rush, Elimination, System PPT file The loaded exam file name is used as the title name, and the system default No No No

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 43 Multiple Mode, Survey test ID number can be changed No Normal, Rush, Elimination, Multiple Mode, Survey Any format of exam files The loaded exam file name is used as the title name, and the system default test ID number can be changed Yes No No No Paper Quiz, Homework Hardcopy The loaded answer sheet file name is used as the title name, and the system default test ID number can be changed Yes* No No No Vote System PPT file The loaded vote file name is used as the title name, and the system default test ID number can be changed No No No No Roll Call None Not needed No No No Yes Normal, Rush, Elimination Not needed Not needed No Optional** Optional** *A system exam PPT file could be used as an answer sheet. **If answers are not provided before a test, the answers can be entered after each question is finished or they can be entered in the QClick report system. 3.1.1.1 Class: The QClick system engages the class in a quiz session. A class must be created and selected prior to any activities. A teacher and a subject are associated with a specific class. The students in the class can be place in groups. The class setting, allows several options for entering, class information. You can choose to import a student roaster from a spreadsheet or choose to enter the individual student information into the program. In like manner, the teacher information and the subject name

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 45 6. To add or remove the students to or from the class, click the Manage button to display the Manage Students window. 7. To import or export the student roster from or to a spreadsheet, click the Import or Export button to display the file browser. 8. To set up the grouping for the students in the class, click Grouping to display the Group Management window.

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 46 There are two grouping methods, random and manual. Click the Random button for the random grouping, the software will randomly select students for the grouping. Click the Manual button to display Group Edit window for the manual grouping. You can simply click and hold the left mouse button to drag and drop a student from one group to another group. 9. Select the subject associated with the class from the Subject Name drop-down list.

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 47 10. You may Add, Delete, or Modify a subject name in the subject list by clicking the Edit button next to the Subject Name drop-down list. 11. Select the teacher associated with the class from the Teacher Name drop-down list. 12. You may Add, Delete, or Modify a teacher information by clicking the Edit button next to the Teacher Name drop-down list. The teacher list can be imported or exported from a spreadsheet by clicking the Import or Export button under the teacher group window. 13. You must be logged into the QClick system in order to edit or modify your database. Click the Login/Logout button to login or logout of the QClick system. Note: Once a class is selected, the color of the Class button changes into green. 3.1.1.2 Participation Mode: The QClick system has two participation modes Individual and Group. The system the default mode is Individual. You can select either Individual or Group participation mode from the Participation Mode drop-down list. In the Individual mode, the performance test score is taken and reported individually. In the Group mode, the performance test scores and reports are handled in a group. The grouping information is obtained from the class setting. Please refer to section 1.1.1 Class step 8 to set up groups. Only the activity modes Normal Quiz, Rush Quiz and Elimination apply to the group participation mode. 3.1.1.3 Activity Modes: The QClick system has these activity modes: Normal Quiz, Paper Quiz, Homework, Rush Quiz, Elimination, Multiple Mode, Survey, Vote and Roll Call. Choose a mode from the Activity Modes drop-down list before beginning a quiz or activity session. For further detailed information about these modes and how to choose a mode, please refer to section 3.1.2 Activity Modes. 3.1.1.4 Load: The load function allows you to load a quiz file or loading an answer sheet. The PowerPoint quiz file typically contains the quiz answer information. It is not necessary to load an answer sheet when using a PowerPoint quiz file. However, if you choose to use a non- PowerPoint quiz, an answer sheet file is required to be loaded for these activity modes: Normal Quiz, Rush Quiz, and Elimination. If selecting a hardcopy paper or homework mode, only need the answer information is needed; then load in an answer sheet or a PowerPoint quiz file containing the answer information. To load a quiz file or an answer sheet, simply just click the Load button to display the file browser. The system automatically asks you what kind of file you need to load into the system, based on the activity mode you have selected and the type of quiz file you are using.

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 48 Note: Once the loading is finished, the color of then Load button changes into green. 3.1.1.5 Title The QClick system uses the title information to associate the quiz or an activity. The title name and the test ID are used in the quiz management and for the searching use in the student keypads which storing the quiz information. For example, the student keypad may store the homework questions to complete at home. The title and test ID help locate the homework. Once a quiz file or an answer sheet is loaded into the system, associated file name is copied and saved to the quiz title name area and the test ID is embedded into the quiz or answer sheet file in the system. If a quiz or an answer sheet file loaded into the system for the first time, and there is no test ID embedded in the file, the system will automatically assign a test ID and save it to the file for the associated quiz. The test ID number is kept by increasing by one every time the system uses the test ID number to save it to the file. The valid test ID number is 1 to 9999. When the maximum number 9999 reaches, the system will reset the number to 1. You may click the Title button to display the Set Test ID window and change the test ID number you desire to set and or to write a memo for the associated quiz. 3.1.1.6 Run / Start a Quiz Once a class is selected and a quiz file or an answer sheet is loaded, you can start the quiz session by clicking the Run button, or press the “Play” button on the instructor remote keypad to start the session. The loaded PowerPoint or other selected format will display on the screen with a tool bar at the bottom. Note: To hide the tool bar, click the sign on the right corner of the tool bar window; to display the tool bar, move the cursor to the bottom line of the entire window. The display screen is divided into three segments:  Register/Answer Status Bar  Questions display  Tool Status Bar Register/Answer Status Bar: Displays the students logged in register number .The number is displayed in successive order based upon first entry. Each number has a background color:  Gray color – indicates the student keypad is in logout state  Green color – indicates the student keypad is in login state

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 49  Blue/Orange color – indicates response signal received. The color is toggled between blue and orange each time the answer is changed, the system only record the last response received before the test ends. Tool Status Bar: 1. Control Buttons:  Start/Pause – to start or pause the timer  Stop – to stop the time  Previous – return to the previous question page  Next – turn to the next question page  Exit – exit the current quiz session  F1 –Controls the Register/Answering Status Bar size, by continuing to press the button you will cycle the size from large to small and then disappear.  F2 –Controls the Register/Answering Status Bar position, by continuing press the button it will allow you to cycle the position from top, left and right.  Report/ Result / Display the instant report and result. Refer to session 3.1.1.7 Result and Report. Note: All these control buttons are duplicated and displayed on the instructor remote keypad. 2. The Question Answer Timer:  The timeout value is selected for each question during the quiz file set up.  Timer box background colors are: Black: Stop; Green: Running; Yellow: Pause.  The left up/down button will reset the Minute time: Press the up or down button on the left side of the timer box to increase or decrease the Minute timer setting.  The right up/down button will reset the Second timer: Press the up or down button on the right side of the timer box to increase or decrease the Second timer setting. 3. Quiz Status:  Activity Mode: Indicates the current activity you selected.

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 50  Hand Raise: Indicates the number of students who use the raise hand function in their keypad.  Answered/Total: Indicates the ratio of the number of people who answer the question to the total number of people who have logged on.  Question Done: When the question is finished, the sign “Done” will display.  Question No: Indicate the current question number.  Page/Total: The current page number of the total pages. To begin gathering responses from the students, click the Start/Pause button or using the instructor remote keypad press the play button. The register number corresponding to each individual clicker logged in will appear on the top of the screen. The countdown timer will display the remaining time in minute(s) and seconds. The timer value may be increased or decreased by pressing the up/down button before or during the question test. Once the timer is at 0, the receiver will no longer receive audience/participant responses. The timer window will change to black. The instructor can always stop the timer by pressing the Start/Pause button. 3.1.1.7 Result and Report By pressing the Result button (using the PC or the instructor’s remote mouse, or through the instructor remote Result , the instructor can view the responses to the individual quiz question. Results are displayed in a histogram. Green indicates correct responses. Pink indicates incorrect responses. Both the correct responses and incorrect responses are displayed in percentage form in the histogram.

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 51 Press the F1 key to show the detail response answer for each participant. By pressing the Report button (using the PC or the instructor’s remote mouse, or through the instructor remote Report key), the instructor can view the responses to the individual questions. The results are displayed in a table. The table shows the register number, the student ID, the student names, the group number, point information and the response time. Press the F1 key to show the detail response percentage in the histogram for each question.

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 52 3.1.1.8 Exit You can exit the current quiz session by pressing the ESC key on the PC keyboard or on the instructor remote keypad, or by pressing the Exit button on the screen (using the PC or the instructor’s remote mouse). The system will prompt you to save the data to the system database, when the completed session is completed. Note: If the completed session data is not saved, it will be permanently lost. 3.1.2 Activity Modes The QClick system has 9 activity modes: Normal Quiz, Paper Quiz, Homework, Rush Quiz, Elimination, Multiple Mode, Survey, Vote, and Roll Call .Using the free style selection ,there are 3 activity modes: Normal Quiz, Rush Quiz and Elimination . 3.1.2.1 Normal Quiz: In the Normal Quiz, a quiz file must be provided with the correct answer for each question prior to starting the quiz. The quiz file may either be in the PowerPoint format with the embedded answers or not in PowerPoint format, then the answer sheet file must be provided. The instructor controls the pace of the question answering session. 3.1.2.2 Paper Quiz: Using the Paper Quiz no quiz file is necessary. The questions are displayed on hardcopy paper. However, the answer sheet associated with the paper quiz must be loaded prior to starting the session. Once the Paper Quiz has started, the instructor can set up a time limit which will be displayed on the bottom of the tool bar. Registered students will receive the quiz information in their keypad. The quiz title, quiz ID and question frame are automatically received by the student keypads. The students need to hit the ‘T’ key to access the paper quiz broadcast information into their keypad. The students start to answer the questions in their keypad. The quiz pace is controlled by the individual student. When the paper quiz is complete by the student, he or she can directly submit their whole quiz answers without waiting for the other students to finish the test. 3.1.2.3 Homework: The Homework activity allows the instructor to send homework question frames to the student keypads for the students to take home to complete. The homework answers are received from the student keypad. The answers either embedded in the PowerPoint file or from the answer sheet file should be loaded prior to starting the homework session. The homework title from the answer sheet file name or from the PowerPoint file name and the test ID created by the system or set up in the Title window (refer to session 1.1.5 Title) are used for the system tracking of the reports in the database and also used in the student keypad homework searching. There is no time limit for the Homework activity. Note: Homework Mode is either running in a state of assigning (Sending) or receiving.

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 53 When the current homework session is running but before the Start button is pressed or pressed again, the homework session stays in the state of assigning (Sending Homework). Pressing the Start button will trigger Homework mode switching from the state of assigning (Sending Homework) to the state of Receiving. 3.1.2.4 Rush Quiz: This mode is similar to the normal mode. The first student who presses any effective “Rush Quiz” button locks out the rest of the students and is the only person able to respond to this particular question. The time for the response is preset before the test by the instructor. Points can be added for a correct answer or subtracted for a wrong answer. 3.1.2.5 Elimination: This mode is similar to the normal mode. Only those students answering correctly can continue with the test. Those answering incorrectly are automatically eliminated. 3.1.2.6 Multiple Mode: The Multiple Mode activity combines the Normal Quiz, Rush Quiz and Elimination in one quiz session. The loaded quiz file or answer sheet contains the mode activity information in each question set up. If you choose the Multiple Mode as your quiz session activity mode, the system automatically selects the activity mode for the current quiz question based on what activity mode the system reads from the embedded mode set up for each question in the quiz file or in the answer sheet. If a loaded quiz file or a loaded answer sheet contains questions with multiple modes set up, but you use Normal Quiz, or Rush Quiz, or Elimination as the whole quiz session activity mode, the activity mode you select will overwrite the embedded mode set up in each question. For example, if you select the Normal Quiz as your current quiz session activity mode, but the current question mode is set to Rush Quiz, the system will ignore the Rush Quiz activity mode and use the Normal Quiz as the whole quiz session activity mode. 3.1.2.7 Survey: The Survey activity is used for subjective response. The QClick system collects the survey responses and provides a report of the survey results. You may use the system Exam Editor to create a survey file. A set of value points from high to low is assigned to the items, which are used as the numeric evaluation of the survey, and they will also used in the system reporting. You may choose to load a PowerPoint file with the weight information embedded in the file as your survey test. If you do choose to use PowerPoint, then answer sheets with the item weight information associated with the survey file should be loaded prior to starting the survey activity. The responses from the audiences are used to evaluate the survey questions; there are no correct or incorrect answers related to the responses. 3.1.2.8 Vote: The Vote activity mode is similar to the Survey activity mode. The audience responses contain no

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 54 correct or incorrect answer information. When you select the Vote activity mode, the system allows you to only load the vote file in PowerPoint format. No answer sheet is needed. In this activity mode, the audience’s response is either a positive or a negative with no correct answer. 3.1.2.9 Roll Call: The Roll Call mode allows the instructor to take attendance. When you select the Roll Call activity mode, the system won’t ask you to load in any quiz files or any answer sheets prior to starting the Roll Call activity. The roll call result can be saved into the system database as a part of the permanent file, or it can be viewed immediately after the activity. 3.1.2.10 Free Style Normal/Rush/Elimination: The QClick system uses the Free Style option for the Normal Quiz, Rush Quiz and Elimination activity mode. The Free Style option allows the instructor to start a quiz session without loading a prepared quiz file or an answer sheet. The quiz question information could be the captured images from the computer or from the internet or from a third party software application. The question information could also be verbal questions while using a white board or just verbal questioning. The correct answers to these questions are provided after each question is answered or after the whole quiz session is completed. The main advantage of Free Style is ease of use, no prepared materials, and instant engagement of the students. Additionally, if the teacher chooses all of the student quiz performance data can be stored in the report section and become a part of the grade book. To use the Free Style option, follow these steps: 1. Under the Quiz Genius tab window, check the Free Style check box to select the Free Style option. 2. Select the Normal Quiz, Rush Quiz or Elimination activity mode from the Activity Mode drop-down list. 3. Click the Run button to start the Free Style activity mode. 4. The status tool bar will appear on the bottom of screen. If you do not wish to capture any images or use the system white board tool to draw, click the Start button on the status tool bar to start an oral quiz. 5. To capture an image, right click on the Status Tool Bar area. Select the Cut Picture item from the pop-up window. The cursor changes the shape and the color. Hold the left mouse button and draw a rectangular window on the image you want to capture. Double click on the selection box. The system white board tool will display the image you captured on the center of the white board screen. 6. If you want to use the system white board to draw or write a quiz question; right click on the Status Tool Bar area. Select the Manage Picture item from the pop-up window. The system white board tool will be displayed.

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 55 7. The system white board tool contains these controls:  Pen button – Click the button to select the pen function.  Eraser button – Click the button to select the eraser function.  Color button – Used for the selection of a color for the pen.  Clear button – Click the button to clear all images on the white board screen.  Pen Thickness drop-down list – Click to select the thickness number for the pen. The larger the number, the thicker the line.  Import button – Click this button to import an image file. The import function only takes the “.bmp” file format. The imported image will be displayed in the white board window.  Capture button – Click this button to capture and display an image in the white board window. 3.1.2.11 Comparison of Mode Selections and Their Functions Activity modes Multiple choices with one answer Cloze+ or short text answer Need correct answer?Group participate mode restricted?Instance result histogram available? Report available?No-Free Normal √ √ √ √ √

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 56 Quiz No-Free Paper √ √ √ √ √ No-Free Homework √ √ √ √ √ No-Free Rush √ √ √ √ √ No-Free Elimination √ √ √ √ √ No-Free Survey √ √ √ √ No-Free Vote √ √ √ √ No-Free Roll Call √ √ √ Free Normal √ √ √* √** √ Free Rush √ √ √* √ √ Free Elimination √ √ √* √ √ “√” (Yes) means the activity mode can support the function. Blank (No) means the activity mode cannot support the function. “*” Provide answers after a quiz question answer or a session is completed. “**” Pressing the Result Key displays you the roll call result table. + A cloze test (also cloze deletion test) is an exercise, test, or assessment consisting of a portion of text with certain words removed (cloze text), where the participant is asked to replace the missing words. Cloze tests require the ability to understand context and vocabulary in order to identify the correct words or type of words that belong in the deleted passages of a text. This exercise is commonly administered for the assessment of native and second language learning and instruction (Wikipedia)

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 57 3.1.3 Logon and Force Login 3.1.3.1 Logon Prior to using the QClick system, both the Instructor and the student will need to logon to the system The instructor must select a class containing a list of the student ID’s before starting a quiz session. If the students want to participate in the quiz or exam, they need to set up their keypad student IDs. These ID numbers should be from the class student roster list. When the class is selected, the instructor and the student can logon to the QClick system Please refer to the hardware manual section regarding the instructor and students keypad. 3.1.3.2 Force Login If a student is not in the student ID roster but desires to participate in the quiz or the exam, they may execute a forced logon. They will simply logon in the normal manner; however, the software will display a Force Login window, when logging on. The ID and the name of the student who want to force login will be displayed on the Force Login window. Then, the instructor can choose to allow the student to participate. To operate the Force Login function, follow these steps: 1. Click the check box on Force Login student list window to select the student. 2. To allow the student Force Login, click the Join button. The student ID and name will be automatically saved to the student roster of the class. The session test data will also be automatically saved to the system database.

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 58 3. To reject the student to Force Login, click the Remove button. The student will be unable to attend the session quiz. 4. Whether the student is permitted to Force Login or not, the “Invalid ID” is displayed on the student keypad before permission. After the instructor approves the Force Login, the student should try one more time to logon to the system RF network. 3.2 Exam Editor The QClick system software allows you to take bulleted PowerPoint slides and convert them easily at the touch of a button. Additionally, you can import XML files and as they are imported, they are converted into the answer key automatically. You can use the QClick software to import PDF files as well as Word documents to be used in your testing. To use the Exam Editor, follow these steps: 1. Select Exam Editor Tab window. 2. To edit an existing PowerPoint file, click the Open button which will display the file browser allowing you to select a file. 3. To edit a new PowerPoint file, click the New button which displays a new PowerPoint template. 4. To add a new slide, select a Template slide from the Template drop-down list. Then Click the Add button. To open additional template lists, click more>>. 5. To save the edited PowerPoint quiz file, click the Save button. 6. To delete the current slide from the PowerPoint quiz file, click the Delete button

$Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 59 7. To close the edited PowerPoint quiz file, click the Close button. 8. To set up the PowerPoint quiz file, click the PowerPoint Setup button. This will display you to the PowerPoint Setup window. Refer to the session 3.2.8 PowerPoint Setup for further details. 9. To set up an answer sheet, click the Answer Sheet Setup button. This will display the Answer Sheet Setting window. Refer to the session 3.2.11 Answer Sheet Setup for further details. Note: The system always loads the template list which was last used in the Exam Editor. 3.2.1 Open: The Open function is used to open an existing PowerPoint quiz file for editing. A file browser will appear after clicking the Open button allowing you to choose a PowerPoint quiz file. The default loading path is: “(Installation Path)\QClick\User\QRF900\Paper_Base.” 3.2.2 New: The New function is used to open a new PowerPoint quiz file. Clicking the New button will bring up a blank template. 3.2.3 Templates: The Templates drop-down list provides template models for easy editing .The default template file is loaded when you first time use the Exam Editor. The user defined template file can be opened by clicking “more >>”. The software always loads the template file last used. 3.2.4 Add: The Add function is used to add the selected Template model to your PowerPoint editing quiz file.$

$Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 60 3.2.5 Del: The Del function is used to delete a slide from the PowerPoint editing quiz file. The software will prompt you for confirmation of delete when the Del button is clicked. 3.2.6 Save: The Save function is used to save the current edited PowerPoint quiz file. The default path is: “(Installation Path)\ QClick \ User\QRF900 \Paper_Base.” 3.2.7 Close: The Close function closes the current PowerPoint editing quiz file. The software will prompt you to save, if the opened PowerPoint quiz file has been changed. 3.2.8 PowerPoint Questions Setup To set up PowerPoint questions, go to the Exam Editor Tab and click the Setup button. This will display the PowerPoint Question Settings window. If a PowerPoint quiz file is open, the file name will be displayed on the top of the window bar, confirming you are setting up the questions for the quiz file.$

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 61 To set up questions for an opened PowerPoint quiz file, follow these steps: 1. Open a PowerPoint quiz file from the Exam Editor, refer to session 2.1 Open; or click Open in the menu bar shown at the top of this window, allowing you to open an existing PowerPoint quiz file. You can also create a new PowerPoint quiz file from the Exam Editor, refer to session 2.2 New; or click on New shown in the menu on the top of this window to open a new PowerPoint quiz file. 2. Window Menus: • New – Enter a new a PowerPoint quiz file for the questions set up. • Open – Opens an existing PowerPoint quiz file from your file browser, for question set up. • Save – Save the questions set up into the open PowerPoint quiz file. • Save As – Allows saving the current open PowerPoint quiz file by another file name. • Exit – Exits the Question settings window. • Standard – Opens the state education standard hierarchical chart for you to choose a standard for question setup. Refer to session 3.2.9 Standard Setup. 3. Function Items: • Question#: -- Select the question you desire to set up from the Question# drop-down list. • Add a Question: -- Click the Add button to add an additional question right after the currently displayed question. • Delete a Question: -- Click the Del button to delete the currently displayed question. • Template: -- Click the Template drop-down list to select the template for the current question set up. Refer to session 3.3 Template for detail. • Question Mode: -- Click the Question Mode drop-down list to select the question mode for the current question set up. Refer to session 3.2.10 Question Mode for detail. • Activity Mode: -- Click the Activity Mode drop-down list to select the activity mode for the current question set up. This function is used for use in the Normal Quiz, Rush Quiz and Elimination when used in the Multiple Mode activity. Note: When selecting the Survey or Vote mode from the Activity Mode drop-down list, you will need to switch the Question Setting to Survey or Vote Setting. The Question Title will then be changed to Survey Title or Vote Title. • Question Title: -- The question title window is used to edit the current question title content. If you create a New PowerPoint quiz file, this window will be blank. • Answer Option Setting: -- The software assigns default 4 default options to each newly created question. You may increase or decrease the total number of options by clicking the Add button or the Del button under area. • Option Operation: -- Use the Add button or the Del button to increase or decrease the total number of options. The Option drop-down list provides you

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 62 a selection of options to be deleted. When you add or delete the options, the Correct Answer Selection will be automatically updated. • Correct Answer Selection: -- Click on the Ratio button next to the letter option to indicate the correct option. If you choose not to have a correct answer for the question, then click the Ratio button to “No Correct Answer”. • Point: -- The point value is specified for correct answers. The valid point number is from 1 to 250 and the default value is set to 10. • Time Limit: -- Specifies the time limit for answering the questions. The session running timer copies this time limit value when every question is started. The valid time is from 1 second to 900 seconds and the default value is set to 30 seconds. Note: The new set timer value in a running session will overwrite the time limit value set here in the question set up. • All Questions in Same Settings: -- If you check the box All Questions in Same Settings, you will apply the Point and Time Limit setting for the current question to all of questions in the test. To have different Point and Time Limits for individual questions, uncheck this box. The All Questions in Same Settings check boxes are located in the Difficulty Level area and Rush Quiz Set area. They have similar functionality. • Difficulty Level: -- Select the Difficulty Level for the current question setting, by clicking on the corresponding radio button. • Rush Quiz Set: -- The Rush Quiz Set is only applied to the Rush Quiz activity mode. • Points Deducted For Incorrect Response: -- Set the point’s value from 0 to 250 for incorrect answering deduction when the session is in Rush Quiz mode. The default point is set to 10. • Time Limit in Rush Quiz Mode: -- Set the time limit for an answer given in the Rush Quiz. When a student wins the question rush, then he or she will be given this amount of time to answer the question. Note: The new set timer value in a running session will overwrite the time limit value set here in the Rush Quiz question set up. • Prev Question: -- The Prev Question button is used to view or to edit the previous question set up. When clicking the button, the Question Settings window will display the previous question. • Next Question: -- The Next Question button is used to view or to edit the next question set up. When clicking the button, the Question Settings window will display the next question. • Save Setting: -- Click the Save Setting button to save any questions setting changes to the currently open PowerPoint quiz file. If you exit the question setting window without saving the changes, the changes will be lost. • Exit: -- Click the Exit button to exit the question setting window. The software will prompt you to save the changes, if you change the question setting. If it is not saved, the changes will be lost.

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 63 3.2.9 Standard Setup Refer to section 3.2.8 PowerPoint Question Setup regarding the menu Standard in the Question Setting window. The state education standard can be set up for a question setting. Click the menu Standard under the Question Setting window, the Standard set up window will display. The standard hierarchical chart is displayed on the right of the window. Select a standard applied for the question setting from the chart by clicking the corresponding check box, and then click the Ok button. The standard setting will be saved to the question. This state education standard is used in the QClick reports system. These controls are displayed on the left of the Standard window: • Import: -- The Import function is used to import the state education standard XML file. Click the Import button to display the Import Standard window. Next, click the Browse button; the import file browser will display. Load in the file and then choose the standard you desire to import from the list in Choose the standard or standards window. Current import function only supports XML format files. • Export: -- The Export function is used to export the state education standards to XML files. Click the Export button to display the Export file browser. Save the exporting standard to the XML format file you desire. • Add: --The Add function is used to add a standard under an existing parent state education standard. Select the parent standard by clicking the check box on the right hierarchical standard chart window. Then click the Add button; the Standard Setting window will display. In the window, enter the code into the Code text box and enter the standard title into the Title text box. Then click the Save and Close button.

$Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 64 • Delete: -- The Delete function is used to delete a standard from the hierarchical standard chart. Select the standard you desire to delete by clicking the check box on the right hierarchical standard chart window. Then click the Delete button to delete the standard. The software will prompt you for confirmation of the deletion. • Save: -- Click the Save button to save all the standard setting changes. If you close the Standard window without saving the change, all the standard setting changes will be lost. • Close: -- Click the Close button to close the Standard window. The software will prompt you to save the standard setting changes if there are any changes to the standard setting. 3.2.10 Question Modes Refer to section 3.2.8 PowerPoint Question Setup regarding the Question Mode setup item. The QClick exam system handles 5 question modes: Single Answer, Multiple Answer, Cloze Test, Short Answer and Teaching Plan. • Single Answer: -- Multiple choice question with only a single correct answer choice. • Multiple Answer: -- Multiple choice question with the option of more than one correct choice. • Cloze Test: -- Due to its nature and use, this type of question does not lend itself to multiple choices. The answer could be the numeric numbers of fractions or the decimal numbers or letters. • Short Answer: -- type of question is answered with a short sentence. • Teaching Plan: -- If a question is set up as a teaching plan, the question cannot be used as a quiz question. It is used for the presentation of teaching material. 3.2.11 Answer Sheet Setup Under the Exam Editor Tab, clicking the Answer Sheet Setup button will display the Answer Sheet Settings window allowing you to set up an answer sheet. Please refer to the Chapter 2 Exam Editor regarding when you need to load in an answer sheet. The Answer Sheet Setting window looks and functions very similarly to the PowerPoint Question Setup window. To edit an existing answer sheet click Open under the window menu bar or you may create a new answer sheet to edit by clicking New . Many of the function controls in the Answer Sheet Setting window are the same as those in the PowerPoint Question Setup window. Refer to session 3.2.8 PowerPoint Question Setup. There are two functions Import and Export which have been added to the Answer Sheet Setting window.$

Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 65 • Import: --The Import function allows you to import the Microsoft spreadsheet format of answer sheet into this Answer Sheet Setting window. Clicking the menu Import to bring you to the import file browser to allow you to select a file name. Then click the Open button to confirm the importing. • Export: -- Export function is used to export the answer sheet setting in this Answer Sheet Setting window to a Microsoft spreadsheet format file. Clicking the menu Export to bring you to the export file browser to allow you to select a file name. Then click the Save button to confirm the exporting. 3.3 Template Design Using the Template Design, you can design various types of template models and save them into the system. When creating future tests, you can easily bring these template models into the Exam Editor. The QClick system provides some basic default template models and is loaded when you use the Template Design for the first time. To use the Template Design, follow these steps: 1. Select Template Design Tab. 2. To edit an existing template design file, click the Open button; this will display your file browser and allow you to choose a file. 3. To create a new Template Model file, click the New button; and a blank PowerPoint slide will displays. 4. Click the Add button; the software will display a system question Template list with different alignment options. Select the template option by clicking on it, and the selected template will be added to your template design file.

$Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 66 5. To add a name or identification for new slides; click on the Template Name text box to enter the name for the current design template being edited, and then press the “Enter” key. 6. Typically, a new template will be displayed in the template list in alphabetical order. If you choose to re-assign the placement, click the block you desire to assign on the PowerPoint Slide display (Question Title, Options…) and then click the Option Assignment drop-down list to select either “Qu_Title” or “Options”. For example, if you want the first option block to be assigned to option B, click and select the first option block and then click the Option Assignment drop-down to select “Option B”. 7. To delete the currently edited template slide from PowerPoint template file, click the Delete button. The software will prompt you for deletion confirmation. 8. To save the edited PowerPoint template file, click the Save button. 9. To close the edited PowerPoint template file, click the Close button. If changes have been made, the software will ask you to save the changes, otherwise, the changes will be lost. The detail description for the template design control is as following: 3.3.1 Open: The Open function will open the existing PowerPoint template file for editing. A file browser will be displayed after clicking the Open button allowing you to choose a PowerPoint quiz file. The template file extension is “.pot” or “.potx”. The default loading path is: “(Installation Path)\QClick\User\QRF900\Module”. 3.3.2 New: The New function will create a new PowerPoint template file. Clicking the New button will display a blank template slide. 3.3.3 Add: The Add function will add a new template model selected from the system Template list with different alignment options, appending to the last template in the file.$

$Copyright © 2009 All Rights Reserved by QOMO HiteVision. www.qomo.com 67 3.3.4 Del: The Del function will delete the template slide from the opened PowerPoint template file. The software will prompt you for deletion confirmation when the Del button is clicked. 3.3.5 Save: The Save function will save the currently edited PowerPoint template file “.POT”. The default save path is “(Installation Path)\QClick\User\QRF900\Module”. 3.3.6 Close: The Close function will close the currently edited PowerPoint template file. The software will prompt you to save. If the opened PowerPoint template file has been changed, the changes will be saved. 3.3.7 Template Name: The Template Name is the editing window used to re-name the template model name. 3.3.8 Option Selection: The Option Selection will determine which block on the PowerPoint slide template is assigned to the Question Title; and which block is assigned to Option A or Option B. If the template question model is created using the system template, the choices will be automatically assigned; otherwise, the Question Title and each option assignment will be assigned manually. 3.4 Reports$

QOMO HiteVision QRF900-TR1 Wireless QClick User Manual of QRF900

QOMO HiteVision, LLC. Wireless QClick of QRF900

Contents

User Manual

Navigation menu

Namespaces

Views

Navigation