Psion 75273RADA Cellular TX User Manual 7535 G2 Hand Held Computer

Psion Inc Cellular TX 7535 G2 Hand Held Computer

Users Manual Part 2

WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual 193Chapter 5: ConfigurationImagerSetting this parameter to on allows the imager to make automatic gain, integration and illumination adjustments based on ambient light before capturing the bar code. If the adjustment is insufficient, further adjustments are made automatically before another image is captured.Fast ConvergeNote: “Auto Exposure” must be set to ‘on’ in order for this parameter to function. Keep in mind that while this parameter can improve imager performance, “Fast Converge” increases battery power consumption.Setting this parameter to on speeds the “Auto Exposure” process. It allows the imager to rapidly snap a number of bar code capture attempts while finding ideal values for gain, integration and illumination.Max Gain, Max Integration And Max IlluminationImportant: These parameter values should only be changed by qualified Psion Teklogix personnel. These parameters represent internal values used by the 2D imager. The “Auto Exposure” parameter automatically adjusts the “Max Gain”, “Max Integration” and “Max Illumination” parameters to produce the best bar code read. Keep in mind that “Auto Exposure” must be set to on in order for these parameter values to be automatically adjusted.Double-tapping on any of these parameters displays an associated dialog box in which an allowable range is displayed: Max Gain – 357 to 7920, Max Integration – 0 to 65535, Max Illumination – 0 to 7.Decoder TimeoutThe decoder is a set of algorithms that examine the image and attempt to find the bar codes, and then turn the pixels into data that the computer can use—this process takes time. “Decoder Timeout” limits the amount of time the decoder will spend attempting to decode an image, and forces it to stop and grab a new image, which will probably be easier to decode. Note: When decoding multiple bar codes in one image, the value assigned to ‘Decoder Timeout’ should be increased to 200ms/extra bar code after the
Chapter 5: ConfigurationImager194 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manualfirst.Adaptive Windowing“Adaptive Windowing” is an advanced technique used to speed up bar code recognition in certain applications. This parameter automatically reduces the size of the window to the user-programmed window size when it successfully decodes (which reduces decode time the next time it is used), but increases it to the full size window (1280x1024 for SX5303) on a failed decode.Note: This feature assumes that you have reached an understanding about how the device operates in your application, and that, after a learning period, operators will get used to using the imager in one particular way. It also assumes that a trained operator will usually only have near miss scenar-ios. Constant Illumination“Constant Illumination” is used to reduce the intrusiveness of the device’s illumination on the observer. Instead of the illumination turning on and off every time the device attempts a decode (2-4 times per second), the illumination stays on from the time the trigger is pulled until a decode is successful. This feature is useful in low light environments, since it will also reduce the distraction that the illumination can have on nearby co-workers.5.11.5.3 Code 39 SettingsEnabledSet this parameter to on to enable “Code 39”.Field Size/CharRefer to page 143 for details.5.11.5.4 Code 128 SettingsEnabledSet this parameter to on to enable “Code 128”.Field Size/CharRefer to page 143 for details.
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual 195Chapter 5: ConfigurationImager5.11.5.5 EAN 13EnabledSet this parameter to on to enable “EAN 13”.AddendumAn addendum is a separate bar code, supplementary to the main bar code. This parameter provides three options: Disabled, Optional and Required. Depending on the value chosen for this parameter, an addendum is recognized or ignored.• Double-tap on Addendum to display a dialog box listing your options.• Highlight an item, and tap on OK.When “Addendum” is set to Disabled, the scanner does not recognize an addendum. If this parameter is set to Optional, the scanner searches for an addendum and if one exists, appends it to the main bar code. When the parameter is set to Required, the scanner does not accept the main bar code without an addendum.Note: Setting “Addendum” to ‘Optional’ reduces performance. It should only be chosen if at least some of the bar codes being read have addendums.Prefix/SuffixRefer to “Prefix/Suffix” beginning on page 144.5.11.5.6 EAN 8EnabledSet this parameter to on to enable “EAN 8”.AddendumRefer to “Addendum” on page 195.Prefix/SuffixRefer to “Prefix/Suffix” beginning on page 144.
Chapter 5: ConfigurationImager196 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual5.11.5.7 UPC AEnabledSet this parameter to on to enable “UPC A”.AddendumRefer to “Addendum” on page 195.Prefix/SuffixRefer to “Prefix/Suffix” beginning on page 144.5.11.5.8 UPC EEnabledSet this parameter to on to enable “UPC E”.AddendumRefer to “Addendum” on page 195.Prefix/SuffixRefer to “Prefix/Suffix” beginning on page 144.5.11.5.9 Code 93EnabledSet this parameter to on to enable “Code 93”.Field Size/CharRefer to page 143 for details.5.11.5.10 CodabarEnabledSet this parameter to on to enable “Codabar”.Field Size/CharRefer to page 143 for details.
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual 197Chapter 5: ConfigurationImager5.11.5.11 Interleaved 2 of 5EnabledSet this parameter to on to enable “Interleaved 2 of 5”.Field Size/CharRefer to page 143 for details.5.11.5.12 RSS Code (Reduced Space Symbology)EnableSetting this parameter to on enables “RSS Code” scanning capability.Field Size/CharRefer to page 143 for details.5.11.5.13 CompositeImportant: To successfully read this type of bar code, the two types of symbolo-gies included in a composite bar code must be enabled. EnabledSet this parameter to on to enable “Composite” bar codes.5.11.5.14 PDF-417EnableSetting this parameter to on enables PDF-417 two dimensional (2D) coding.Field Size/CharRefer to page 143 for details.
Chapter 5: ConfigurationImager198 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual5.11.5.15 Micro PDF-417EnableSetting this parameter to on enables “Micro PDF-417” bar code scanning. Micro PDF-417 is a multi-row symbology that is useful for applications requiring greater area efficiency but lower data capacity than PDF-417.Field Size/CharRefer to page 143 for details.5.11.5.16 2D Data MatrixEnableSet this parameter to on to enable “Data Matrix”.Field Size/CharRefer to page 143 for details.5.11.5.17 2D QR CodeEnabledSet this parameter to on to enable “2D QR Code”.Field Size/CharRefer to page 143 for details.5.11.5.18 2D MaxicodeEnabledSet this parameter to on to enable “2D Maxicode”.Field Size/CharRefer to page 143 for details.5.11.5.19 2D AztecEnabledSet this parameter to on to enable “Aztec”.
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual 199Chapter 5: ConfigurationImagerField Size/CharRefer to page 143 for details.5.11.5.20 Postal: PlaNETEnabledSet this parameter to on to enable “Postal: PlaNET”.Field Size/CharRefer to page 143 for details.5.11.5.21 Postal: PostNETEnabledSet this parameter to on to enable “Postal: PostNET”.Field Size/CharRefer to page 143 for details.5.11.5.22 Postal: AustralianEnabledSet this parameter to on to enable “Postal: Australian”.Field Size/CharRefer to page 143 for details.5.11.5.23 Postal: JapaneseEnabledSet this parameter to on to enable “Postal: Japanese”.Field Size/CharRefer to page 143 for details.
Chapter 5: ConfigurationOptions200 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual5.11.5.24 Postal: KoreanEnabledSet this parameter to on to enable “Postal: Korean”.Field Size/CharRefer to page 143 for details.5.11.5.25 Postal: RoyalEnabledSet this parameter to on to enable “Postal: Royal”.Field Size/CharRefer to page 143 for details.5.11.6 OptionsThis tab allows you to tailor the double-click parameters and the display options associated with your scanner.
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual 201Chapter 5: ConfigurationOptions5.11.6.1 Double Click ParametersClick Time (msec)This parameter controls the maximum gap time (in milliseconds) for a double-click. If the time between the first and second clicks of the scanner trigger is within this time, it is considered a double-click. The allowable range is 0 to 1000. A value of zero disables this feature.A double-click produces different results depending on whether or not a value is assigned in the “Click Data” parameter. When a value is not assigned for the “Click Data”, double-clicking the scanner trigger overrides the target dot delay set in the “Dot Time” parameter and initiates a normal scan sweep. If a value is assigned for the “Click Data” parameter, double-clicking the scanner trigger inserts the “Click Data” value rather than initiating a scan.Click DataFor both integrated and external scanners, this parameter determines which character is sent to the application installed in your hand-held following a double-click. A dialog box appears, asking that you press the key you want to insert. The ASCII/Unicode key value of the keypress is displayed. 5.11.6.2 Display ParametersScan ResultWhen this parameter is enabled, the type of bar code and the result of the scan appear on the screen. Note that this information is only displayed after a successful decode and is visible only while the scanner trigger is pressed. When the trigger is released, this information is cleared from the screen.Scan IndicatorWhen this parameter is enabled, the laser warning logo appears on the display whenever the scanner is activated.Scan Result Time (sec)The value assigned to the “Scan Result Time (sec)” parameter determines how long the scan results of a successful scan are displayed on the screen. Time is measured in seconds, and a value of “0” (zero) disables the parameter. When you choose this option, a dialog box appears where you can enter a value.
Chapter 5: ConfigurationOptions202 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User ManualNote: To remove the scan result from the screen before the “Result Time” has expired, point the scanner away from the bar code and press the trigger.Good Scan Beep And Bad Scan BeepThese parameters determine whether or not the hand-held emits an audible scanner ‘beep’ when a good (successful) scan or a bad (unsuccessful) scan is performed. Set these parameters to either on to enable the beeper or off to disable it.Soft Scan TimeoutThis parameter is used by the SDK “Scan” function (soft-scan: starting a scan session via the SDK function, instead of a physical user trigger press). The value assigned to this parameter determines the soft-scan timeout from 1 to 10 sec. (default is 3 sec.). Scan Log FileIf this parameter is enabled, the input barcode and the modified/translated output bar code are logged in the file \Flash Disk\ScanLog.txt. Keep in mind that if the “Scan Log File” is enabled, there is a slight performance effect when performing multiple scans since the log file is written to persistent storage.
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual 203Chapter 5: ConfigurationTranslations Tab5.11.7 Translations TabThe Translations tab allows you to define up to 10 cases, each consisting of up to 10 rules in sequential order. Only one case will be applied to a bar code and a case will only be applied if all rules specified in the case are successful – if a rule within a case fails, the entire case fails.•In the Translation tab, tap on the Case # to create rules.
Chapter 5: ConfigurationTranslations Tab204 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual• Tap on the No rule dropdown menu to display the rules.When you choose a rule, an associated screen is displayed in which you can define the rule.
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual 205Chapter 5: ConfigurationSNMP (Simple Network Management Protocol) Setup5.11.7.1 Case RulesThe case rules are defined as follows:• No rule – ignored.• Search and replace – replaces all instances of the match string. (Note that this rule cannot fail.)• Match at index – matches the match string at a specified index.• Match and replace at index – matches the match string at a specified index and replaces/changes it.• Replace at index – replaces/changes unspecified data in a given range.• Add barcode prefix/suffix – adds a global prefix or suffix.• Verify barcode size – verifies the bar code size. This rule should generally be assigned first, before creating subsequent rules.Note: Keep in mind that the effects of previously applied rules must be taken into account when creating subsequent rules. For example, if the bar code size is important, it should be checked before any rules that might change the size are applied.Translation information about the status of each case/rule is displayed in the scan log file (see “Scan Log File” on page 202) when enabled. This is useful if a case fails, and you are trying to determine why a rule is failing. 5.12 SNMP (Simple Network Management Protocol) SetupSimple Network Management Protocol (SNMP) is the protocol used to monitor and manage devices attached to a TCP/IP network (providing they support SNMP).SNMP uses Management Information Bases (MIBs) that define the variables an SNMP Network Management Station can access. Each product has a defined set of MIBs that determine how SNMP operates, the type of access allowed and so on. All Psion Teklogix products support the TEKLOGIX-GENERIC-MIB—a MIB that defines some common features across Psion Teklogix products.
Chapter 5: ConfigurationContact Tab206 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User ManualAll devices also support MIB-II, a management information base that defines the common features of TCP/IP networks. The SNMP Agent software embedded in the WORKABOUT PRO G2 product supports SNMPv1 (RFC 1157).•In the Control Panel, choose the SNMP icon.Figure 5.20 SNMP Icon5.12.1 Contact TabThe SNMP dialog box is displayed.ContactThis field identifies the contact person for this managed node along with information about how to get in touch with this person. The content of this parameter is accessible through MIB-II’s sysContact object.
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual 207Chapter 5: ConfigurationCommunities TabLocationThis parameter is used to identify the physical location of this node (e.g., Warehouse A: Pillar 32B). The content of this parameter is accessible through MIB-II’s sysLocation object.5.12.2 Communities TabThe Communities tab allows you to limit access to SNMP-managed devices to those SNMP Managers with matching “community names”, as specified by RFC 1157.Enable SNMPEnabling Enable SNMP allows the device to respond to SNMP queries and to send Traps. After enabling this option and rebooting the device, the SNMP Agent will automatically start up. To disable this feature, remove the check mark from the check box.5.12.2.1 Adding A Community• Choose the Add button to add a new ‘community’.
Chapter 5: ConfigurationCommunities Tab208 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User ManualNameThe value assigned here is the name assigned by the network administrator to the set of devices to which this managed node belongs.RightsThis menu allows you to specify access, that is, ‘Read-Only’ or ‘Read-Write’5.12.2.2 Modifying A Community SettingTo modify an existing community:• Highlight the community you want to alter.• Choose the Change button.A Modify Community dialog box is displayed, listing the community you highlighted.•Edit the Name and/or Rights, and press [ENTER] to save your changes.5.12.2.3 Removing An Existing CommunityTo remove an item:• Highlight the community you want to remove in the Communities tab and then choose the Remove button.A Delete Confirmation screen is displayed. • To remove a community, choose the Yes button, orIf you decide not to remove the community, choose the No button.
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual 209Chapter 5: ConfigurationTrap Destination Tab5.12.3 Trap Destination TabA trap is an unsolicited report sent to SNMP Managers by the SNMP Agent running on the managed node. This option allows you to define where the report will be sent.5.12.3.1 Enabling Authentication TRAPSEnabling Enable Authentication TRAPS allows authorization traps to be sent when a failure is detected (e.g., an SNMP message received with a bad community name).5.12.3.2 Adding A DestinationTo add a new destination:• Choose the Add button.• Type a destination IP address in the text box provided, and press [ENTER].5.12.3.3 Changing A DestinationTo change an existing trap destination:• Highlight the destination you want to alter in the Trap Destination tab, and then choose the Change button.
Chapter 5: ConfigurationPermitted Hosts Tab210 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User ManualA dialog box like the one displayed when you add a destination is displayed.• Make the changes to the destination, and press [ENTER] to save the changes.5.12.3.4 Removing A Trap DestinationTo remove a trap destination:•In the Trap Destination tab, highlight the destination you want to delete.• Choose the Remove button.A Delete Confirmation screen is displayed. • To remove a destination, choose the Yes button, orIf you decide not to remove the destination, choose the No button.5.12.4 Permitted Hosts TabFor security reasons, the Network Administrator may want to restrict SNMP-node access to a known sub-set of SNMP Managers. This tab lists the IP addresses of all the SNMP Managers which are allowed to monitor and manage this device. If no entries are listed, the device will accept SNMP queries from any host.
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual 211Chapter 5: ConfigurationPermitted Hosts Tab5.12.4.1 Adding A HostTo add a new host:• Highlight the Add button, and press [ENTER].• Type a new host IP address in the text box provided, and press [ENTER].5.12.4.2 Changing A HostTo change an existing host IP address:• Highlight the IP address you want to alter in the Permitted Hosts tab, and then choose the Change button.A dialog box like the one displayed when you add a host is displayed.• Make the necessary changes, and press [ENTER].
WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual 213PERIPHERAL DEVICES & ACCESSORIES 66.1 Carrying Accessories.............................2156.1.1 Attaching The Hand Strap.......................2156.1.2 Attaching The Pistol Grip.......................2176.1.3 Protective Carrying Case........................2186.1.3.1 Using The Swivel Belt Loop With The Carrying Case.....2186.1.4 Soft Shell Holster ...........................2206.2 The Batteries.................................2216.3 Chargers And Docking Stations.......................2216.3.1 Installation–Chargers And Docking Stations.............2216.3.2 Power Consumption Considerations..................2216.3.3 Operator Controls...........................2226.3.4 Important Charger Safety Instructions.................2226.4 Desktop Docking Station...........................2236.4.1 Charging A Battery Installed In The WORKABOUT PRO G2. . . . 2246.4.2 Charging A Spare Battery.......................2256.4.3 Battery Charge Duration........................2256.4.4 Charger LED Indicators........................2256.4.5 Troubleshooting The Charging Operation Of The Dock .......2256.4.6 Desktop Docking Station Ports....................2266.4.7 Linking A WORKABOUT PRO G2 To A PC............2266.4.7.1 Using Microsoft ActiveSync To Work With Files.......2276.4.8 Linking A WORKABOUT PRO G2 To An Ethernet Network . . . . 2276.4.8.1 Network Access.........................2276.4.9 Troubleshooting The Docking Station Operations. . .........2286.5 Single Battery Charger–Model #WA3001-G1 . ...............2286.5.1 Inserting A Battery In The Single Battery Charger..........2286.5.2 Battery Charge Duration........................2286.5.3 Charge Indicators–The LED......................229
Chapter 6: Peripheral Devices & Accessories214 WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual6.6 Quad Battery Charger–Model #WA3004-G1.................2296.6.1 Charging Batteries...........................2306.6.2 Battery Charge Duration........................2306.6.3 Charge Indicators–The LEDs......................2306.6.4 Troubleshooting . . . .........................2306.6.4.1 Excessive Charge Duration..................2306.6.4.2 Indicator Flashing Red.....................2306.6.4.3 Power LED Does Not Light Up................2316.6.4.4 Indicator Does Not Light When Battery Installed.......2316.7 Quad Docking Station–Model #WA4004-G1.................2326.7.1 Quad Docking Station Setup......................2326.7.2 Quad Indicators.............................2336.7.3 Inserting A WORKABOUT In The Quad Docking Station......2336.7.4 Network Access . . . .........................2336.7.4.1 Network Addressing......................2336.7.5 Battery Charging–LED Behaviour...................2346.7.6 Troubleshooting . . . .........................2346.7.6.1 Network Link Unsuccessful..................2346.7.6.2 Hand-Held LED Does Not Light When Docked.......2346.8 The Vehicle Cradle..............................2356.8.1 Vehicle Cradle Mounting Recommendations . ............2356.8.1.1 Mounting Template......................2366.8.2 Wiring Guidelines ...........................2366.8.3 Using The Vehicle Cradle .......................2366.8.4 Maintaining The Vehicle Cradle....................2366.8.5 Powered Cradle Installation In High Voltage Vehicles.........2376.8.6 Powered Vehicle Cradle Installation..................2376.8.6.1 Wiring Vehicle Power To The Cradle.............2386.8.7 The Port Replicator...........................2386.9 Bluetooth Peripherals.............................239
WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual 215Chapter 6: Peripheral Devices & AccessoriesCarrying Accessories6.1 Carrying AccessoriesThere are a variety of carrying accessories to help the operator work safely and comfortably with the WORKABOUT PRO G2.Table 6.1 Carrying AccessoriesImportant: Do not use adhesives such as Loctite to secure screws on carrying accessories. These chemicals may damage the plastic casing.6.1.1 Attaching The Hand StrapThe hand strap can be attached to the back of the WORKABOUT PRO G2 to provide a secure means for operators to carry the hand-held.The hand strap is attached to the back of unit using two Phillips head screws provided with this accessory.Carrying Accessory Model NumberHand Strap WA6025 for WORKABOUT PRO C G2WA6125 for WORKABOUT PRO S G2Pistol Grip WA6001-G1Pistol Grip for SX5393 Imager WA6002-G1Protective Vinyl Case WA6091 for WORKABOUT PRO C G2WA6190 for WORKABOUT PRO S G2Soft Shell Holster WA6050
Chapter 6: Peripheral Devices & AccessoriesAttaching The Hand Strap216 WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual• Use a Phillips screwdriver to attach the strap to the two threaded inserts on the back of the WORKABOUT PRO G2, near the top of the unit• Stretch the hand strap toward the base of the WORKABOUT PRO G2, and hook the bottom of the strap into the slot near the base of the battery pack.
WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual 217Chapter 6: Peripheral Devices & AccessoriesAttaching The Pistol Grip6.1.2 Attaching The Pistol GripThe pistol grip is attached to the four threaded inserts on the back of the WORK-ABOUT PRO G2. Four Phillips head screws are provided with this accessory.Note: Prior to installation, make sure the trigger mechanism is securely snapped into the pistol grip body and that the trigger operates properly.• Position the pistol grip so that it fits snugly over the back of the unit and the holes in the pistol grip are aligned with the threaded inserts on the back of the WORKABOUT PRO G2.
Chapter 6: Peripheral Devices & AccessoriesProtective Carrying Case218 WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual• Tighten the screws to a torque of 3 lbs-in (3kgf-cm) to secure the pistol grip in place.6.1.3 Protective Carrying CaseA carrying case is available for WORKABOUT PRO G2s to shield the unit from damage. It is equipped with a soft plastic window to protect the unit display and keyboard. A variety of cases are available, depending on the type of end-cap attached to your unit.6.1.3.1 Using The Swivel Belt Loop With The Carrying CaseThe WORKABOUT PRO G2 carrying case is equipped with two rings onto which you can attach a swivel belt loop so that you can hang the unit from your belt. If you prefer, you can also attach a belt clip to this accessory so that you can clamp the unit onto your waistband or belt. (rather than slide your belt through the belt loop).Figure 6.1 Belt Loop And Belt Clip• Clip the two hooks on the belt strap to the bottom of the carrying case.
WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual 219Chapter 6: Peripheral Devices & AccessoriesProtective Carrying Case• Slide your belt through the belt loop.Figure 6.2 Attaching The Belt LoopAlternatively, you can attach a plastic clip to the swivel belt loop and clip it to your waistband or belt.Figure 6.3 Belt ClipBelt Clip
Chapter 6: Peripheral Devices & AccessoriesSoft Shell Holster220 WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual6.1.4 Soft Shell HolsterA soft shell holster with removable belt and swivel holster pad can be used to hang a WORKABOUT PRO G2 with a pistol grip from you waist Figure 6.4 Soft Shell Holster• Insert the belt in the swivel holster pad.• Attach the pad on either the left or right side of the holster case, depending on whether you are left- or right-handed.• Fasten the belt comfortably around your waist. Slide the adjustable ring on the belt to tighten the holster in place.Swivel Holster Pad andRemovable BeltSoft Shell Holster
WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual 221Chapter 6: Peripheral Devices & AccessoriesThe Batteries6.2 The BatteriesThe WORKABOUT PRO G2 will operate with a High-Capacity Lithium Ion battery pack, a Super High-Capacity Lithium Ion battery pack.In addition to the main battery, the hand-held is equipped with a rechargable coin battery–a Maxell ML2032.6.3 Chargers And Docking StationsImportant: Keep in mind when ordering a charger or docking station, you must also order the appropriate power cord separately.Psion Teklogix offers a variety of chargers and docking stations for the WORKABOUT PRO G2. These include:• Single Battery Charger–Model No. WA3001-G1• Quad Battery Charger–Model No. WA3004-G1• Desktop Docking Station–Model No. WA4003-G2• Quad Docking Station–Model No. WA4004-G16.3.1 Installation–Chargers And Docking StationsWhen installing a charger or docking station, consider the following guidelines. • Keep chargers and docking stations away from excessive dirt, dust and contaminants. • Chargers will not charge batteries outside an ambient temperature range of 0° C to 45 °C (32° F to 113° F). It is recommended that the charger or docking station be operated at room temperature–between 18° C and 25° C (64° F to 77° F) for maximum performance.After unpacking your unit:• Visually inspect the charger for possible damage. • Install the IEC power cord and apply power. 6.3.2 Power Consumption ConsiderationsCheck to ensure the mains circuit supplying chargers and/or docking stations is adequate for the load, especially if several chargers and docking stations are being powered from the same circuit. • Quad charger–can consume up to 2A @ 120VAC or 1A @ 240VAC.
Chapter 6: Peripheral Devices & AccessoriesOperator Controls222 WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual• Quad docking station–can consume up to 3A @ 120VAC or 1.5A @ 240VAC.6.3.3 Operator ControlsWORKABOUT PRO G2 docking stations and chargers have no operator controls or power switches.6.3.4 Important Charger Safety Instructions•SAVE THESE INSTRUCTIONS–This manual contains important safety and operating instructions for battery charger s.• Before using the battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery.• The mains power cord shall comply with national safety regulations of the country where the equipment is to be sold.• Use of an attachment not recommended or sold by the battery charger manufacturer may result in fire, electric shock, or personal injury.• To reduce risk of damage to the electric plug and cord when unplugging the charger, pull the plug rather than the cord.• Make sure the cord is positioned so that it is not stepped on, tripped over, or otherwise subjected to damage or stress.• Do not operate the charger with a damaged cord or plug. Replace immediately.• Do not operate the charger if it has received a sharp blow, been dropped, or other-wise damaged in any way; it should be inspected by qualified service personnel.• Do not disassemble the charger; it should be repaired by qualified service person-nel. Incorrect reassembly may result in electric shock or fire.• To reduce risk of electric shock, unplug the charger from the outlet before attempting any maintenance or cleaning.• An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in fire or electric shock. If an extension cord must be used, make sure:• The plug pins on the extension cord are the same number, size, and shape as those on the charger.• The extension cord is properly wired and in good electrical condition and that the wire size is larger than 16 AWG.• Do not expose the charger to rain or snow.• Do not place batteries in the charger if they are cold from extended exposure to a freezer or outside temperatures below 10°C (50°F). Allow them to warm up to room temperature for at least two hours.
WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual 223Chapter 6: Peripheral Devices & AccessoriesDesktop Docking Station• Do not use the charger if, after an overnight charge, any of the batteries feel warmer than the charger housing. The charger should be inspected by qualified service personnel.• Do not use the charger if any of the batteries or the charger get more than luke-warm. The equipment should be inspected by qualified personnel.6.4 Desktop Docking StationThe WORKABOUT PRO G2 can be inserted in a desktop docking station, model number WA4003-G2. Figure 6.5 Desktop Docking StationNote: The desktop docking charger is shipped with its own user manual. It is critical that it be reviewed for additional information and updates.WORKABOUT PRO G2Charge WellLEDDocking StationConnector Pins(Indicates charge status ofa spare battery insertedin the rear charge well of the docking station.)
Chapter 6: Peripheral Devices & AccessoriesCharging A Battery Installed In The WORKABOUT PRO G2224 WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User ManualThe desktop docking station is designed to charge the battery installed in the WORKABOUT PRO G2 along with a spare battery pack.Figure 6.6 Back Of Desktop Docking StationImportant: This docking station can only be used to charge Psion Teklogix approved Lithium-Ion batteries–specifically model numbers WA3000-G1 and WA3006.6.4.1 Charging A Battery Installed In The WORKABOUT PRO G2• Insert the DC power cable to the DC IN socket on the desktop docking station. Plug the pronged end of the cable into an AC outlet.• Slide the hand-held into the docking station, making certain that the LIF (Low Insertion Force) port on base of the WORKABOUT is securely seated on the docking station connector pins. An icon is displayed briefly in the navigation bar at the top of the hand-held screen indicating that the unit is properly installed in the station–. This icon is only displayed when the unit is switched on.The LED on the WORKABOUT PRO G2 lights up indicating that the unit has external power and battery charging will begin. It is safe to leave the unit in the desktop docking station while it is not in use–the battery will not be overcharged.Spare BatteryCharge WellDC IN SocketSpare Battery
WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual 225Chapter 6: Peripheral Devices & AccessoriesCharging A Spare Battery6.4.2 Charging A Spare Battery• Insert the battery in the spare battery charge well at the back of the docking station, aligning the contacts on the battery with the contacts in the spare battery charge well.6.4.3 Battery Charge DurationA fully discharged battery can take up to 5 hours to charge. The desktop docking station stops applying power to the battery when it is fully charged–there is no risk of overcharge if the battery remains in the charge well. 6.4.4 Charger LED IndicatorsThe desktop docking station is equipped with a single dual-coloured LED indicator in the lower-right corner of the front panel.Table 6.2 Desktop Battery Charger LED BehaviourNote: Battery charging continues whether the hand-held is switched on or off.6.4.5 Troubleshooting The Charging Operation Of The DockThe quad battery charger troubleshooting section beginning on page 230 also applies to the charging behaviour of the desktop docking station.LED Behaviour Charge StatusOff No battery detected in the slot.Solid Green Charge in progress.Fast Flashing Green Battery charged to less than 80% of capac-ity.Slow Flashing Green Battery charged to greater than 80% of capacity.Solid Red Battery temperature outside of charge range–0° C to 50 °C.Flashing Red Battery is not charging. Battery fault.
Chapter 6: Peripheral Devices & AccessoriesDesktop Docking Station Ports226 WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual6.4.6 Desktop Docking Station PortsFigure 6.7 Back of Desktop Docking StationThe desktop docking station is equipped with two USB ports–a Host USB port to connect peripherals such as a printer, keyboard, etc. and a Client USB to connect the docking station to a PC.6.4.7 Linking A WORKABOUT PRO G2 To A PCThe desktop docking station can be connected to a PC so that you can exchange files in the same way that you would between PC drives. A USB cable is included with your docking station.DC IN SocketHost USB PortClient USB Port
WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual 227Chapter 6: Peripheral Devices & AccessoriesLinking A WORKABOUT PRO G2 To An Ethernet NetworkTo link the WORKABOUT PRO G2 to a PC:• Insert the hand-held in the desktop docking station.• Insert the USB cable into the docking station Client USB connector. Attach the other end of the cable to a USB port on the PC.You’ll need to install connectivity software on your PC before you can pass information between the hand-held and the PC.6.4.7.1 Using Microsoft ActiveSync To Work With FilesActiveSync®–Microsoft PC connectivity software–can be used to connect the WORKABOUT PRO G2 to PCs running this software. You’ll be able to:• View WORKABOUT PRO G2 files from Windows Explorer.• Drag and drop files between the WORKABOUT PRO G2 and the PC in the same way that you would between PC drives.• Back up WORKABOUT PRO G2 files to the PC, then restore them from the PC to the hand-held again, if needed, and so on.You can use the Getting Started CD included with your WORKABOUT PRO G2 to install ActiveSync.6.4.8 Linking A WORKABOUT PRO G2 To An Ethernet NetworkAn USB-Ethernet adaptor cable – model number WA4010-G1 – is used to connect the WORKABOUT PRO G2 to an Ethernet network through a desktop docking station.• Insert the adaptor’s USB connector into the Host USB port on the desktop docking station.• Connect your network Ethernet cable to the Ethernet port on the adaptor cable.6.4.8.1 Network AccessThe hand-held unit automatically detects insertion into the desktop dock and loads the appropriate drivers to communicate with the USB-Ethernet converters.Network AddressingThe host application uses standard TCP/IP protocol to name, locate and communicate with a specific WORKABOUT PRO G2 on the network.
Chapter 6: Peripheral Devices & AccessoriesTroubleshooting The Docking Station Operations228 WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User ManualIf a link is established between a WORKABOUT PRO G2 and a host, the application on the host and on the hand-held must have a recovery mechanism in the event that the WORKABOUT PRO G2 is removed from the dock, interrupting the link.6.4.9 Troubleshooting The Docking Station OperationsThe indicators, applications and drivers required to use and monitor the desktop docking station as a dock (as opposed to a charger) are installed on the WORKABOUT PRO G2–no applications are present on the docking station itself.6.5 Single Battery Charger–Model #WA3001-G1Figure 6.8 Single Battery ChargerThe single battery charger is designed to charge a single battery. It has a DC IN socket and is equipped with one LED that indicates the status of the charge process. 6.5.1 Inserting A Battery In The Single Battery Charger• Insert the DC power plug into the charger. Plug the pronged end of the power cable into an AC outlet.• Install the battery, aligning the contacts on the battery with the contacts in the battery charge well.6.5.2 Battery Charge DurationIt can take up to 4 hours to fully charge a battery. The single battery charger stops applying power to the battery when it is fully charged–there is no risk of overcharge if the battery remains in the charge well. The 75% charge indicator is handy if you need a quick recharge–a quick charge often takes less than one hour.
WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual 229Chapter 6: Peripheral Devices & AccessoriesCharge Indicators–The LED6.5.3 Charge Indicators–The LEDThe LED on the top of the charger indicates battery charge progress. Table 6.3 Single Battery LED BehaviourNote: Battery charging continues whether the hand-held is switched on or off.6.6 Quad Battery Charger–Model #WA3004-G1Table 6.4 Quad Battery ChargerThe quad battery charger is designed to charge up to four Lithium Ion batteries at one time.Note: The gang charger is shipped with a user manual. It is critical that this manual be reviewed for additional information and updates.LED Behaviour Charge StatusOff No battery detected in the charge well.Solid green Battery is fully charged.Fast flashing green Battery is charged to 75% of capacity.Slow flashing green Charge in progress.Solid red Battery is outside ambient temperature range of 0° C to 45 °C (32° F to 113° F).Flashing red Charge alarm indicating a charging circuit problem. Refer to “Troubleshooting” on page 230 for details.Flashing red then green in a 3 second cycle Power up test sequence.
Chapter 6: Peripheral Devices & AccessoriesCharging Batteries230 WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual6.6.1 Charging Batteries• Slide the battery into a charge well, aligning the contacts on the battery with the contacts in the charge well.6.6.2 Battery Charge DurationA fully discharged battery can take up to 4 hours to charge. The quad battery charger stops applying power to the battery when it is fully charged–there is no risk of overcharge if the battery remains in the charge well. The 75% charge indicator is handy if you need a quick recharge–a quick charge often takes less than one hour.6.6.3 Charge Indicators–The LEDsEach battery charge well is equipped with an LED to indicate the charge status of the battery. When a battery is inserted in the charger, the colour and behaviour of the LED associated with the charge well in use indicates the status of the charge. Refer to Table 6.3 on page 229 for details.6.6.4 Troubleshooting6.6.4.1 Excessive Charge DurationThe charger is equipped with a recalibration function–a function that fully discharges and then fully recharges the battery. This process is necessary to recalibrate the battery capacity gauge internal to the battery. The charger attempts recalibration when: • the battery capacity is at less than 30%, and • the battery has undergone more than 40 partial charge cycles since the last full discharge.The recalibration function extends the charge time by up to 2 hours.6.6.4.2 Indicator Flashing RedIf the indicator flashes red:• Remove all batteries and disconnect the mains power cable. • Wait at least 20 seconds, and then plug the cable in again.If any of the charge well LEDs continue to flash red, the charger is defective and requires service. If all indicators are flashing red, there is a power supply problem and the charger requires service.
WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual 231Chapter 6: Peripheral Devices & AccessoriesTroubleshooting6.6.4.3 Power LED Does Not Light Up• Remove all batteries, and unplug the charger. • Connect another device to the mains outlet to ensure there is power. • Remove the IEC mains power cable from the charger, and check it for damage. • Reconnect the mains cable in the charger and mains outlet. If the power LED still does not light up:• Unplug the mains cable, and check the fuse at the rear of the charger. If the fuse appears to be intact, the charger requires service.6.6.4.4 Indicator Does Not Light When Battery Installed• Remove the battery, and clean the contacts on the battery and the charge well. • Reinstall the battery, and check that it is fully seated in the charger well.• Inspect the charge well contacts for damage (are they bent, flattened, twisted or broken).• Try inserting a battery that you know to be working in the charger well. • Reconnect the mains power cable, and check that the charger well indicator flashes at powerup.
Chapter 6: Peripheral Devices & AccessoriesQuad Docking Station–Model #WA4004-G1232 WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual6.7 Quad Docking Station–Model #WA4004-G1Figure 6.9 Quad Docking StationNote: The quad docking station is shipped with a docking manual. It is critical that this manual be reviewed for additional information and updates.The quad docking station permits each of four docked WORKABOUT PRO G2s to communicate with a 10/100 BaseT Ethernet network at greater than 2Mbps. It also provides sufficient power to operate and fast charge the batteries in the units. 6.7.1 Quad Docking Station SetupAfter unpacking the unit:• Visually inspect the unit for any damage. • Install the IEC power cord and apply power. A green indicator in the lower-right corner of the front panel lights up to indicate that power is present. • Attach a CAT5 RJ45 network patch cable (supplied) between your network and the RJ45 jack on the rear of the dock. A green LED is illuminated next to the RJ45 connector when a valid network link is established.
WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual 233Chapter 6: Peripheral Devices & AccessoriesQuad IndicatorsA user application must be loaded onto each WORKABOUT PRO G2 that utilizes the quad dock for communication. When the network is connected and this application is loaded, the quad dock is ready for use.6.7.2 Quad IndicatorsThe quad dock is equipped with a power indicator LED and RJ45 link and traffic indicator LEDs. When a valid network link is established, a green LED is illuminated next to the RJ45 connector.6.7.3 Inserting A WORKABOUT In The Quad Docking Station• Slide the WORKABOUT PRO G2 into the cradle portion of the quad dock until lightly latched. The hand-held detects that it is in a quad dock and momentarily displays the appropriate icon in the navigation bar at the top of the screen–. The LED on the hand-held unit lights up to show it has external power and may start charging the battery.Interaction with the WORKABOUT PRO G2 while in the quad dock is a function of the user application software used to communicate with the host network.6.7.4 Network AccessThe quad docking station has one 10/100 Ethernet port. You can insert up to four hand-held units. The hand-helds are connected to an internal USB hub. The hand-held unit automatically detects insertion into a quad docking station and loads the appropriate drivers to communicate with the USB/Ethernet converters.6.7.4.1 Network AddressingAlthough the USB converters have fixed Ethernet MAC addresses, there is generally no correlation between these addresses and a specific hand-held. The host application uses standard TCP/IP protocol to name, locate and communicate with a specific WORKABOUT PRO G2 on the network. If a link is established between a WORKABOUT PRO G2 and a host, the application on the host and on the hand-held must have a recovery mechanism in the event that the WORKABOUT PRO G2 is removed from the dock and the link is interrupted.
Chapter 6: Peripheral Devices & AccessoriesBattery Charging–LED Behaviour234 WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual6.7.5 Battery Charging–LED BehaviourThe quad docking station supplies DC power to enable the WORKABOUT PRO G2 internal fast charger. Charge status is displayed on the hand-held LED–the LED turns red while the battery is being charged and turns green once the charge is complete. If the battery is fully charged when the unit is inserted in the docking station, the LED flashes red for less than a second and then turns green. Battery charging continues whether the WORKABOUT PRO G2 is switched on or off.It can take up to 5 hours to fully charge the internal battery.6.7.6 TroubleshootingThe indicators, applications and drivers required to use and monitor the docking station are installed on the WORKABOUT PRO G2–no indicators or applications are present on the docking station itself.6.7.6.1 Network Link UnsuccessfulIf a network link fails, the WORKABOUT PRO G2 application alerts the operator that the link was unsuccessful.6.7.6.2 Hand-Held LED Does Not Light When Docked• Check that the quad docking station has power–is the Power LED on the docking station illuminated?• Try inserting the WORKABOUT PRO G2 in another well in the quad dock.• Check for dirt or contamination on the docking contacts at the bottom of the WORKABOUT PRO G2. Wipe the contacts with a damp cloth if necessary. • Check the pogo pins inside the dock cradle for dirt. Gently wipe with a damp cloth if they appear to be dirty or discoloured.• Check that the pogo pins are not bent or damaged.• Remove and reinsert the WORKABOUT PRO G2 in the cradle, and check that the latch is holding the unit in place (the pogo pins must be compressed for proper contact).• Make certain that the battery installed in the WORKABOUT PRO G2 is not defective.
WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual 235Chapter 6: Peripheral Devices & AccessoriesThe Vehicle Cradle6.8 The Vehicle CradleThe vehicle cradle is a highly ruggedized, single station dock. Although it provides quick insertion and removal, the cradle holds the WORKABOUT PRO G2 securely even when operated in high vibration environments. Depending on the type of hand-held unit you are use, you can choose from the following powered vehicle cradle models:• Vehicle Cradle for WORKABOUT PRO C G2 – WA1010-G1• Vehicle Cradle for WORKABOUT PRO S G2 – WA1110-G1A port replicator option is available for powered vehicle cradles. Refer to “The Port Replicator” on page 238 for details.6.8.1 Vehicle Cradle Mounting RecommendationsWarning: Before mounting a vehicle cradle in a vehicle, there are a number of operator safety issues that require careful attention. An improp-erly mounted cradle may result in one or more of the following: operator injury, operator visibility obstruction, operator distraction and/or poor ease of egress for the operator. Psion Teklogix strongly recommends that you seek professional mounting advice from the vehicle manufacturer. Cable routing within a vehicle cab also requires careful consider-ation, especially for separately tethered scanners and other devices with loose cables. If you are unable to obtain suitable advice, contact Psion Teklogix for assistance (see Appendix A: Support Ser-vices And Worldwide Offices). Note also that for better protection, the equipment should be mounted inside the vehicle roll cage.Pedestal mounts are recommended for all fixed mount locations because they offer optimal operator access. In addition, for safety reasons, only pedestal mounts with fully locking joints should be used in vehicles. Always adjust the pedestal for the optimum viewing angle, and securely tighten the hex and wing screws.The most effective way to mount the vehicle cradle is to use the four #8-32 threaded inserts on the rear of the unit. Bolts must not extend more than 10mm (3/8") into the cradle.To accommodate the service loop of the connector cable, leave a 4" clearance at the bottom of the cradle. Leave a 7" (minimum) clearance at the top of the cradle to allow easy removal of the hand-held. Also remember to leave at least a 3" clearance at the sides of the cradle to allow activation of the release knobs. Refer to the detailed assembly instructions that are packaged with the cradle when selecting a mounting location.
Chapter 6: Peripheral Devices & AccessoriesWiring Guidelines236 WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual6.8.1.1 Mounting TemplateThe vehicle cradle is shipped with detailed mounting instructions including a drill template.6.8.2 Wiring GuidelinesBefore installing cables between the cradle and other devices, review the following:• Ensure that drilling holes will not damage the vehicle or its wiring.• Protect cable runs from pinching, overheating and physical damage.• Use grommets to protect cables that pass through metal.• Use plastic straps and tie-downs to secure cables and connectors in their desired location, away from areas where they may get snagged or pulled.• Keep cables away from heat sources, grease, battery acid and other potential hazards.• Keep cables away from control pedals and other moving parts that may damage the cables or interfere with the operation of the vehicle.6.8.3 Using The Vehicle CradleIf your WORKABOUT PRO G2 is equipped with a shoulder strap or cover, these accessories need to be removed before installing the unit in a vehicle cradle. There is no need to remove handstraps, pistol grips or tethered devices from the unit.• Slide the WORKABOUT PRO G2 into the cradle, and press firmly down-ward until it locks into place. On a vehicle, it’s a good idea to pull up on the WORKABOUT PRO G2 to be certain that it is secure.• To remove the unit, press firmly on the RELEASE button on the front face of the unit until it releases from it latch. The hand-held will be slightly raised so that it can be removed.6.8.4 Maintaining The Vehicle CradleTwo latches in the cradle hold the WORKABOUT PRO G2 firmly in place. Although these latches are designed for robustness and endurance, they will wear over time and will no longer lock the hand-held securely in the cradle. For replacement parts and instructions contact Psion Teklogix. Partial disassembly is required.
WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual 237Chapter 6: Peripheral Devices & AccessoriesPowered Cradle Installation In High Voltage Vehicles6.8.5 Powered Cradle Installation In High Voltage VehiclesWarning: Voltages exceeding 60VDC are considered hazardous. For powered cradle installations on vehicles with batteries above this voltage, ensure the powered cradle power connector is mounted in a dry location on the vehicle, or that the connector is insulated with an appropriate waterproof material after installation. The connector must also be installed out of the vehicle operator’s reach. Exposing an accessible power connector to water or other liquids could create a hazardous situation resulting in serious injury or death.Installation of powered cradles in vehicles that operate above 60VDC require special consideration.Due to the hazardous voltages present on these vehicles, it is necessary to ensure that the powered cradle power supply cable connector is not accessible to the vehicle operator, and does not get exposed to water or other liquids. This can be accomplished in one of the following ways:• Ensure the power connector is installed in a dry location on the vehicle, away from the vehicle operator’s reach (perhaps under a vehicle dash or in a sealed housing).• Cover the power connector with a waterproof heat shrink material.• Wrap the connector securely with a waterproof electrical tape in an area out of the vehicle operators reach.All other installation requirements outlined in this document should also be followed for High Voltage vehicles to insure safe installation and operation of the powered cradle.6.8.6 Powered Vehicle Cradle InstallationThe powered cradle is designed to allow the WORKABOUT PRO G2 to be powered by a vehicle battery. The battery installed in the hand-held is also recharged by the vehicle battery. This option accepts DC power sources ranging from 10 to 55V, with optional pre-regulator. The vehicle cradle can be ordered with the powered cradle option installed.Warning: Applying a voltage greater than that specified or reversing or reversing polarity may result in permanent damage to the cradle power option and will void the product warranty.
Chapter 6: Peripheral Devices & AccessoriesThe Port Replicator238 WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual6.8.6.1 Wiring Vehicle Power To The CradleA 1.8 meter (6 foot) extension power cable (PN 13985) is supplied with your powered vehicle cradle. This cable should be wired to a filtered, fused (maximum 10A) accessory supply on the vehicle. The power cradle draws no more than 8A (less if the accessory supply is greater than 12V). Any additional wiring, connectors or disconnects used should be rated for at least 10A. The red lead of the power cable attaches to the positive vehicle supply. The black lead connects to the negative supply–this should be connected to a proper terminal block and not to the vehicle body. The power cradle is fully isolated and can be used with both negative and positive chassis vehicles.You may have the option of connecting power before or after the ‘key’ switch. It is preferable to wire the power cradle after the key switch–that is, it cannot be turned on without the key on. However, if the operator switches the key off repeatedly for long periods during a shift, it may make more sense to wire the cradle before the switch.Keep in mind that the WORKABOUT PRO G2 will continue to operate with or without vehicle power as long as its battery has sufficient charge.If an unfused power source must be used, a fuse assembly (PN 19440) must be added to the extension power cable (the fuse and instructions are supplied with the cable). Use only a 10A slow blow UL approved fuse in the fuse assembly.6.8.7 The Port ReplicatorThe port replicator (Model# WA4005-G1) is an optional accessory that allows tethered devices as well as mounted peripherals (e.g., bar code printers or weigh scales) to be attached to the vehicle cradle. The replicator can be used with or without the cradle power option.
WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual 239Chapter 6: Peripheral Devices & AccessoriesBluetooth PeripheralsThe functionality of the WORKABOUT PRO G2 tether port is replicated into RS-232 serial interfaces by the port replicator. It provides the user with 3 DB9 serial interfaces as well as one Type B USB port (for connecting a Host device).6.9 Bluetooth PeripheralsThe WORKABOUT PRO G2 is equipped with a Bluetooth radio, making it is possible to communicate with a variety of Bluetooth peripherals, including GSM/GPRS handsets, scanners, printers, and so on. The range of the Bluetooth radio is limited to approximately 5 meters.Psion Teklogix provides built-in support for the Bluetooth peripherals listed below.• GSM/GPRS universal handset• Bluetooth printerKeep in mind that Bluetooth and IEEE 802.11g radios both operate in the 2.4GHz band. Although the WORKABOUT PRO G2 includes features to minimize interference, performance of the system will not be optimal if you use both radios simultaneously. Typically, when both radios operate in the hand-held at the same time, they cannot transmit simultaneously–this has a negative impact on overall system throughput. To minimize the impact on the backbone 802.11g network, Psion Teklogix recommends using Bluetooth peripherals that have low transaction rates (such as printers and scanners).Refer to “Bluetooth Setup” on page 111 for information about setting up your Blue-tooth devices for communication. In addition, review the manual shipped with your Bluetooth device to determine the method used to associate with the WORK-ABOUT PRO G2 host.
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual 241SPECIFICATIONS 77.1 WORKABOUT PRO G2...........................2437.2 Radio Specifications.............................2447.3 Scanner Specifications............................2457.3.1 SE 1223HP, LR, ALR And SE 955HP Specifications . . . . . . . .2457.3.1.1 SE 1223HP Decode Zone..................2467.3.1.2 SE 1223LR Decode Zone..................2467.3.1.3 SE 1223ALR Decode Zone . . . . . . . . . . . . . . . . .2477.3.1.4 SE 955HP Decode Zone...................2477.3.2 EV15 Imager Specifications.....................2477.3.2.1 EV15 Imager Decode Zone . . . . . . . . . . . . . . . . .2487.3.3 HHP5180 Imager...........................2487.3.3.1 HHP5180 Imager Decode Zone . . . . . . . . . . . . . . .2497.3.4 SX5393 Imager . . . . . . . . . . . . . . . . . . . . . . . . . . . .2507.3.4.1 SX5393 Imager Decode Zone . . . . . . . . . . . . . . . .251
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual 243Chapter 7: SpecificationsWORKABOUT PRO G2Note: Performance specifications are nominal & subject to change without notice.7.1 WORKABOUT PRO G2 Dimensions• WORKABOUT PRO C G2: 223mm x 75/100mm• WORKABOUT PRO S G2: 220mm x 75/100mm x 31/42mmWeight (without battery)• WORKABOUT PRO C G2: 450g• WORKABOUT PRO S G2: 425gOperating System• Microsoft Windows Embedded CE 5.0 Drop Test• Withstands 26 drops (on 12 edges, 8 corners, 6 faces) at 150cm to polished concrete while powered on and configured with accessories such as CF radio, scanner, pistol drip.Water/Dust• IP65, IEC 60529Operating Temperature And Humidity• 20 to 50° C (non-condensing); excluding display 1 to 50° C• 5% to 91% RH non-condensingStorage Temperature• 40 to 60° C ApprovalsSafety: UL 60950-1, CSA C22.2 No. 60950-1-03, EN 60950-1, IEC 60825-1:1993+A1:1997+A2:2001 Class 2 CDRH 21 CFR 1040 Class IIEMC: FCC Part 15 Class B, EMC Directive Class B
Chapter 7: SpecificationsRadio Specifications244 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User ManualLaser: IEC 60825-1:1993+A1:1997+A2:2001 Class 2 CDRH 21 CFR 1040 Class II7.2 Radio SpecificationsModel RA2041: 802.11b/g Direct Sequence Spread Spectrum (DSSS)Form factor Compact Flash Type I extendedAntenna port Two Hirose U.FL connectors for antenna diversityTransmit Power 802.11g: 32mW maximum (+15 dBm)802.11b: 80mW maximum (+19 dBm)Frequency Range 2.400 - 2.4897 GHzChannels FCC: 11ETSI: 13TELEC:13RX Sensitivity -96dBm @ 1Mbps, -90dBm @ 11Mbps,-94dBm @ 6Mbps, -75dBm @ 54MbpsData Rates 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps802.11b: 1, 2, 5.5, 11 MbpsBluetooth RadioEmbedded (USB interface)Bluetooth Version 1.2 compliant (features Adaptive Frequency Hopping for better co-existence with 802.11 radio) Chip Antenna 2dBi peakTransmit Power -3dBm (0.5mW) minimum, +4dBm (2.5mW) maxFrequency Range 2.400 - 2.4835 GHzRX Sensitivity -80dBm max(BER<=0.1%)Data Rate 732.2 kbps and 57.6 kbps asymmetric, 433.9 kbps symmetric
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual 245Chapter 7: SpecificationsScanner Specifications7.3 Scanner Specifications7.3.1 SE 1223HP, LR, ALR And SE 955HP SpecificationsScan Engine SE 1223HP SE 1223LR SE 1223ALR SE 955HPScan Angle 42º ± 2º 23º ± 2º 13º ± 2º 47° ± 3° default / 35° ± 3° reducedScan Rate 35 (± 5) scans/sec (bi-directional) 35 (± 5) scans/sec (bi-directional) 35 (± 5) scans/sec (bi-directional)104 (± 12) scans/sec(bi-directional)Scan Pattern Linear Linear Linear LinearWavelength 650nm 650nm 650nm 650nmInput Voltage 5.0 VDC ± 10% 5.0 VDC ± 10% 5.0 VDC ± 10% 3.0-5.5 VDC ± 10%Input Current 110 mA typical 115 mA typical 115 mA typical 65 mA typicalStandby Current 130 µA typical 70 µA max. 70 µA typical 8 µA maxOperating Temperature -40ºC to 60ºC-40ºF to 140ºF -30º to 55ºC-22ºF to 131ºF -30°C to 55°C-22ºF to 131ºF -20° to 60° C-4° to 140° FPrint ContrastMinimum 20% absolute dark/light reflectance mea-sured at 650 nmMinimum 40% absolute dark/light reflectance mea-sured at 650 nmMinimum 40% absolute dark/light reflectance mea-sured at 650 nmMinimum 25% absolute dark/light reflectance mea-sured at 650 nmDimensions1.93 cm max. H x 3.84 cm max. W x 3.51 cm max. D0.76 in. max. H x 1.51 in. max. W x 1.38 in. max. D1.93 cm max. H x 3.84 cm max. W x 3.51 cm max. D0.76 in. max. H x 1.51 in. max. W x 1.38 in. max. D1.93 cm max. H x 3.84 cm max. W x 3.51 cm max. D0.76 in. max. H x 1.51 in. max. W x 1.38 in. max. D1.21 cm H x 2.16 cm W x 1.55 cm (max)0.47 in. H x 0.85 in. W x 0.61 in. D (max)SymbologiesUPC/EAN, Code 128, Code 39, Code 93, I 2 of 5, Discrete 2 of 5,Codabar, MSI UCC/EAN 128, TriOptic Code 39UPC/EAN, Code 128, Code 39, Code 93, I 2 of 5, Dis-crete 2 of 5,Codabar, MSI UCC/EAN 128, TriOptic Code 39UPC/EAN, Code 128, Code 39, Code 93, I 2 of 5, Discrete 2 of 5,Codabar, MSI UCC/EAN 128, TriOptic Code 39UPC/EAN, Code 128, Code 39, Code 93, I 2 of 5, Discrete 2 of 5, Codabar, MSI Plessey
Chapter 7: SpecificationsSE 1223HP Decode Zone246 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual7.3.1.1 SE 1223HP Decode Zone7.3.1.2 SE 1223LR Decode Zone4,844 Lux to 86,112 LuxMinimum range Width of field Maximum range Width of fieldMil Size Inches Inches Inches Inches5 2.75 1.25 7 37.5 2.25 1 11 410 1.75 0.5 15.75 6UPC 2122915 2 1 25 1020 2 1 30 12.540 3.75 56 2355 5 66 254,844 Lux to 86,112 LuxMinimum range Width of field Maximum range Width of fieldMil Size Inches Inches Inches Inches10 11 2 24 515 7.5 1 39 820 7.5 1 48 1040 10 2 90 1955 10 2 120 2470 reflective 48 200 40100 reflective 60 240 48High quality symbols in normal room light.
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual 247Chapter 7: SpecificationsSE 1223ALR Decode Zone7.3.1.3 SE 1223ALR Decode Zone7.3.1.4 SE 955HP Decode Zone7.3.2 EV15 Imager Specifications4,844 Lux to 86,112 LuxMinimum range Width of field Maximum range Width of fieldMil Size Inches Inches Inches InchesUPC 19 2 39 415 20 2 50 630 33 4 98 1155 27 2 115 1270 reflective 114 12 250 28100 reflective 125 14 360 41High quality symbols in normal room light.Decode Zone Typical4 mil 1.0 in. - 5.5 in. / 2.54 cm - 13.97 cm5 mil 1.25 in. - 8 in. / 3.18 cm - 20.32 cm7.5 mil 1.5 in. - 13.25 in. / 3.81 cm - 33.66 cm10 mil 1.5 in. - 17.5 in. / 3.81 cm - 44.45 cmUPC 100% 1.5 in. - 23.5 in. / 3.81 cm - 59.69 cm15 mil 1.5 in. - 29.5 in. / 3.81 cm - 74.93 cm20 mil 1.75 in. - 35.5 in. / 4.45 cm - 90.17 cm40 mil * - 40 in. / * - 101.6 cm55 mil * - 55 in. / * - 139.7 cm* dependent on width of bar codeParameter EV15Light Source 617nm Highly Visible LEDScan Angle 40º Minimum Print Contrast Minimum 25%Min x. Dimension 0.1 mm (4 mils)
Chapter 7: SpecificationsEV15 Imager Decode Zone248 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual7.3.2.1 EV15 Imager Decode Zone7.3.3 HHP5180 ImagerReading Distance Up to 90cm (35 in)SymbologiesUPC (E&A), EAN, RSS, Code 39, Code 128, UCC/EAN 128, ISBN, ISBT, Interleaved, Matrix, Industrial and Standard 2 of 5, Codabar, Code 93/93i, Code 11, MSI, Plessey, Telepen, PDF417, Micro PDF417Ambient Light Works in any lighting conditions, from 0 to 100,000 luxShock 2000G, 0.7ms, half sinus, 3 axesVibration 50G r.m.s0 Lux to 100,000 LuxMinimum range Maximum rangeMil Size Inches Inches52.5 710 3 14UPC 214.520 2.5 2240 3 35.5High quality symbols in normal room light.Parameter HHP5180Image Sensor 752 X 480 CMOS sensorMotion Tolerance 4 in. (10.2cm) per secondRotational Sensitivity 360°Viewing Angle ±40°Ambient Light Total darkness to 100,000 lux (full sunlight)Illumination LEDs 626nm ±30nmAiming: LEDs: 526nm ±30nmLaser: 650nm ±10nmParameter EV15
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual 249Chapter 7: SpecificationsHHP5180 Imager Decode Zone7.3.3.1 HHP5180 Imager Decode ZoneSymbologies supported2D: PDF417, MicroPDF417, MaxiCode, Data Matrix, QR Code, Aztec, Aztec Mesa, Code 49, UCC CompositeLinear: Code 39, Code 128, Codabar, UPC, EAN, Interleaved 2 of 5, RSS, Code 93, CodablockPostal: Postnet (US), Planet Code, BPO 4 State, Canadian Post, Japanese Post, KIX (Netherlands) PostOCR Fonts: OCR-A, OCR-BSize1.78cm Depth x 2.79cm Width (without mounting tabs) x 1.21cm Height0.7 in. Depth x 1.1 in. Width (without mounting tabs) x 0.475 in. HeightWeight 5.9 grams (.21 ounces)Operational Input Voltage: Imager: 3.3 VDC ±5% (23°C)Illumination + Aimer 5300: 3.0 VDC to 5.5 VDC (23°C)Current Draw: Imager: Operating Current – 100 mAStandby Current: 100 µAOperating Temperature -30° to +50°C (-34° to 122°F)Storage Temperature -40° to +70°C (-40° to 158°F)Humidity up to 95% RH, non-condensing at 122° F (50°C)Shock 18 shocks of 3,500 G for 0.5 msec at 23°C (73° F)PerformanceFocal PointSR 7 inches (17.8 cm) from lens plateSF 4.5 inches (11.4 cm) from lens plateSR Working Range* 8.3 mil Linear(.020 cm) 10 mil PDF417(.025 cm) 13 mil UPC(.033 cm)15 mil Data Matrix(.038 cm)615 mil QR(.038 cm)35 mil Maxicode(.089 cm)Near 3.5 in.(8.9 cm) 3.1 in. (7.9 cm) 2.1 in. (5.3cm) 2.3 in.(5.8 cm) 2.1 in.(7.9 cm) 2.0 in.(5.1 cm)Far 7.6 in. (19.3cm) 9 in.(22.9 cm) 13.2 in. (33.5 cm) 10.2 in.(25.9 cm) 8.8 in.(22.4 cm) 13.0 in.(33 cm)Parameter HHP5180
Chapter 7: SpecificationsSX5393 Imager250 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual7.3.4 SX5393 ImagerSF Working Range*6.6 mil PDF417(.017 cm)7.5 mil Linear(.019 cm)8.3 mil Data Matrix (.021 cm)8.3 mil QR(.021 cm)6 10 mil Linear(.025 cm) 13 mil UPC(.033 cm)Near 2.8 in. (7.1cm) 2.5 in. (6.4cm) 3.4 in. (8.6cm) 3.4 in. (8.6cm)) 2.2 in. (5.6cm) 2.0 in. (5.1cm)Far 6 in. (15.2cm) 6.5 in. (16.5cm) 5.7 in. (14.5cm) 5.4 in. (13.7cm) 7.6 in. (19.3cm) 8.9 in. (22.6cm)*Data characterized at 23°C and 0 lux ambient light.Parameter HHP5180Optical Resolution 1024H x 1024vField of view at 6 inches 5.12 in. x 5.12 in.Pitch Angle ±45°Skew Angle ±45°Ambient Light 0 to 100,000 lux (full sunlight) 300 lux nominal.Minimum Contrast 10%Targeting Intuitive range finding 626 nm Red LED.Self Illumination Red LEDSupply Voltage 5 V ± 10%Power Supply 3.6 Volt DC nominal (2.7 - 5 Volts DC)Connectivity USB 1.1 or serial asyncConnector to the interface board Molex 52892-1295 or HiRose FH12-12S-.5SHSymbologies SupportedCode 39; Code 39 Full ASCII; UPC-A, -A2, -A5; UPC-E, -E2, -E5; EAN-8 -13; JAN; I2of5; Code 128; Codabar/NW7; RSS 14, RSS Limited, RSS Expanded, RSS 14 Truncated, PDF417, microPDF417; Composite, CC-A, CC-B, CC-C; image capture and signature capture, Data Matrix; QR Code; Maxicode; Aztec Code; Planet; Postnet; Royal Mail 4SCC; 4 State postal codes from Australia, Canada, Japan; Korean Post 3of5Operating Temperature -20° to +50°C (-4° to 122°F)Storage Temperature -30° to +60°C (-22° to 140°F)Humidity 5% to 95% (non-condensing)Weight Image engine 4.1 gramsCo-processor board 6.80 gramsShock 15 drops, 5 ft to concrete at room temperature when integrated correctly into end-user packagingPerformance
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual 251Chapter 7: SpecificationsSX5393 Imager Decode Zone7.3.4.1 SX5393 Imager Decode Zonex Lux to 100,000 LuxMinimum range Maximum rangeMil Size* Inches Inches10 4.6 5.715 3.8 9.215** 4 9.720.8 2.6 11.7*QR code**Data MatrixCode 39 Minimum range Maximum rangeMil Size Inches Inches7.5 4.1 8.410 3.1 10.915 4 9.7
WORKABOUT PRO Hand-Held With Windows Embedded CE 5.0 User Manual A-1APPENDIX APORT PINOUTSA.1 LIF (Low Insertion Force) Port PinoutPIN # Signal Name1 Ground2 Ground3 USB Host Data Plus, For connecting USB devices4 USB Host Data Minus, For connecting USB Devices5 USB Host Power, for powering USB devices (5V, 100mA Max)6 DC Power in, for supplying power to WORKABOUT PRO / charging battery (5V, 3A)7 DC Power in, for supplying power to WORKABOUT PRO / charging battery (5V, 3A)8 LIF Detect, determines if a device is attached to the LIF9 USB Device Data Minus, for operating the WORKABOUT PRO as a USB device10 USB Device Data Plus, for operating the WORKABOUT PRO as a USB device11 Ground12 Ground
Appendix A: Port PinoutsTether Port PinoutA-2 WORKABOUT PRO Hand-Held With Windows Embedded CE 5.0 User ManualA.2 Tether Port PinoutPIN # Signal Name1Ground2 USB Host Data Plus, For connecting USB Devices3 USB Host Data Minus, For connecting USB Devices4 USB Host Power, for powering USB devices (5V, 100mA Max)5 TX Data } TX Data and RX Data are only available on terminals with no internal Bluetooth6RX Data }7 Tether Detect, determines if a device is attached to the Tether port8 DC Power In, for supplying power to WORKABOUT PRO / charging battery (5V, 3A)9 DC Power In, for supplying power to WORKABOUT PRO / charging battery (5V, 3A)10 DC Power In, for supplying power to WORKABOUT PRO / charging battery (5V, 3A)11 Not used.12 Not used.13 Not used.14 Not used.15 Not used.16 Ground17 Ground18 Ground
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual B-1APPENDIX BWIRELESS WIDE AREA NETWORK (WWAN)B.1 Wireless WANPsion Teklogix offers a quad band, GPRS radio – Model Number RA3030-G2; a WORK-ABOUT PRO G2 equipped with a GSM/GPRS radio has wide area networking capabilities. B.1.1 Taskbar IconsWireless WAN icons in the taskbar indicate the status of your wide area network connection. Note that these icons are only visible when a GSM/GPRS radio is installed in the computer, and the interface is enabled.The letter in the signal strength icon (G for GSM/GPRS) indicates that a packet data service is available and initialized. Keep in mind that the signal strength icon is displayed without a letter if packet data service is not available or if it is available but not yet initialized.User interaction is required (e.g. the user is required to enter a PIN).A non-recoverable (fatal) error has occurred.The modem status is unknown or the modem is not connected to any network (the signal strength is 0%).The modem has found a network, and the signal strength is between 1% and 20%.The modem has found a network, and the signal strength is between 21% and 40%.The modem has found a network, and the signal strength is between 41% and 60%.The modem has found a network, and the signal strength is between 61% and 80%.The modem has found a network, and the signal strength is between 81% and 100%.A GPRS packet data connection is active, the signal strength is between 41% and 60% and GSM.GPRS packet service is available.The signal strength icon is replaced by a connection indicator icon when a packet data con-nection is started.A GPRS packet data connection is active.In addition to the signal strength or connection indicator a second icon may be shown:
Appendix B: Wireless Wide Area Network (WWAN)Establishing A ConnectionB-2 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User ManualA new SMS message has arrived.B.1.2 Establishing A ConnectionTo display the main Wireless WAN dialog box:• Double-tap on the Wireless WAN icon in the taskbar.If the icon is not visible in the taskbar, the radio interface has been shut down or the modem has been removed:•In the Control Panel, choose the Wireless WAN icon.Figure B.1 Wireless WAN IconThe main Wireless WAN dialog box is displayed.Figure B.2 Establishing A Connection
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual B-3Appendix B: Wireless Wide Area Network (WWAN)Establishing A ConnectionNote: If you are prompted to enter a PIN, refer to “Entering A PIN Number” on page 4 for details.When “Ready to connect” is displayed in the Status field, the Connect Data button is enabled.• Tap on the Connect Data button.The progress of the connection is tracked in the Status field.• PPP link to modem active.• Authenticating user.• User authenticated.• Connected.Note: Keep in mind that these states may be displayed fairly quickly if the progress of the connection is rapid. When the connection state reaches PPP link to modem active, the taskbar icon changes to indi-cate an active connection. The Connect Data button changes to Disconnect.Disconnecting From A NetworkTo disconnect from the network:• Tap the stylus on the Disconnect button, and then on OK.When the computer’s network connection is severed, the Status field displays “Ready to connect”.The signal strength is displayed in the main Wireless WAN screen, even while a connection is active. The Rx bytes and Tx bytes fields estimate the amount of data transmitted and received, respectively.Shutting Down The Wireless WAN User InterfaceWhile it is not usual to shut down the GSM/GPRS user interface, you can accomplish this by tapping on the File menu and choosing the Exit command at the bottom of the main Wire-less WAN dialog box Note: Once you’ve shut down the user interface, you can only enable the radio by opening the Control Panel and tapping on the Wireless WAN icon to display the Wireless WAN dialog box.
Appendix B: Wireless Wide Area Network (WWAN)Advanced InformationB-4 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User ManualB.1.3 Advanced InformationIn most cases, when a GSM/GPRS radio and SIM are installed in your computer, setup is automatic. Follow the steps outlined under the heading “Establishing A Connection” on page 2 to make a connection. The information in this section is for advanced setup purposes.Entering A PIN NumberIf a PIN is required, a PIN entry dialog box is displayed.• Type your PIN, and press [ENTER].Note: If you exceed the number of allowable attempts, a PUK entry window is brought to the foreground. You’ll need to enter a new PIN number.Once the correct PIN or PUK is entered or if none was required, the modem is instructed to perform a GSM network registration followed by a GPRS attach. The main Wireless WAN dialog box reflects the progress of the initialization.• Searching for modem• Initializing modem•SIM is ready• Searching for network• Registered on network• Searching for GPRS• Ready to connectIf the modem loses the connection to the GSM network, the following states are repeated: Searching for network, Registered on network, Searching for packet data, and Ready to con-nect. Error StatesThe following temporary error states (i.e., these states may disappear without interaction) may be displayed:• Emergency calls only.The modem has found a network but is not allowed to register (e.g. no roaming agreement between networks). The modem keeps searching for another network.
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual B-5Appendix B: Wireless Wide Area Network (WWAN)Tools Menu• No network found.A network is not currently available. The modem continues searching for a network.• Packet data not available.The current network does not support a packet data service.• Packet data not allowed.The modem is not allowed to use the packet data service on the current network (e.g. no GPRS roaming agreement between network; a roaming agreement for voice may still be in place). It is also possible that you do not have a subscription for GPRS at all.The remaining error states are permanent:• SIM is missing.The SIM card is missing. After the SIM has been inserted a warm boot may be required.• SIM failure.The SIM card is permanently disabled (e.g. because the wrong PUK has been entered too many times). A new SIM is needed.• Modem failure.The modem did not respond to commands as expected. If a warm boot does not clear this condition, the modem may need to be replaced.• NDIS error.An internal software error has occurred. If a warm boot does not clear this condition, Psion Teklogix technical support may need to investigate further.B.1.4 Tools MenuThe Tools menu in the main Wireless WAN dialog box offers some additional, advanced setup features.
Appendix B: Wireless Wide Area Network (WWAN)Tools MenuB-6 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User ManualWWAN Data ConfigurationEnable Automatic ConnectIf the Enable automatic connect checkbox is checked (unchecked by default), the Wire-less WAN user interface will attempt to establish a GPRS connection whenever GPRS is available (e.g. after resume from suspend without further user interaction). To activate the automatic connection mode:• Tap on the OK button.While automatic connection mode is enabled, the Connect Data button in the main Wire-less LAN dialog box changes to Disable Auto. To close the currently active connection (if any) and disable the automatic connection mode:• Tap on Disable Auto.
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual B-7Appendix B: Wireless Wide Area Network (WWAN)Tools MenuImportant: Automatic connection mode should not be used if applications other than the Wireless WAN user interface (e.g. Connection Manager) are expected to open and close connections. If the automatic connection mode is enabled and another applica-tion closes the GPRS connection, the WWAN user interface will immediately try to re-establish the connection.Use Virtual Serial PortIf Use virtual serial port is enabled, packet data connections are established through the virtual serial port of the WWAN driver rather than through the WWAN driver directly. This checkbox should only be checked if certain third-party VPN (Virtual Private Network) clients are used that do not work correctly otherwise. The default setting is disabled (unchecked). Notes: The connection setup takes longer through the virtual serial port. Enable Automatic ConfigurationIn most cases, the data connection is configured automatically and no user interaction is required. This is true even if multiple SIM cards from different operators are used with the same device. The connection parameters are adjusted automatically when a new SIM card is detected (this may require a warm boot). The connection parameters are retrieved from a database. Manual configuration should be necessary only if:• One or more parameters in the database are incorrect or a new operator is not yet in the database. (The database should be corrected for subsequent software releases.)• An operator has assigned individual GPRS user names and passwords. • A very large site has their own APN. Such connections always have to be configured manually.• A customer has subscribed for a static IP address. By definition this must be configured manually.
Appendix B: Wireless Wide Area Network (WWAN)Tools MenuB-8 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User ManualProfilesIn the following section, all the parameters that need to be configured for a connection (such as APN, user name, password, DNS server addresses etc.) are referred to as a profile. Every profile is identified by an arbitrary, unique name. The profile named Default is special in that it is always present and can neither be edited nor deleted. The Default profile uses parameters from a built-in database. The home network (the network that issued the SIM) is used for the database look-up. While there can be many configured profiles, only one profile can be active at any time.If connection profiles are configured manually, the Enable automatic configuration checkbox should normally be unchecked.In one particular use case, manually configured profiles may be combined with automatic configuration. If multiple SIM cards are used with the same device, each SIM card being from a different operator and some or all of them requiring a manually set up profile, auto-matic configuration may be used to automatically pick the correct manually configured profile for each SIM card. For this to work, each profile must be configured while the corre-sponding SIM card is inserted in the device and initialized (i.e. the status is at least SIM is ready).The Select profile: drop-down list in the data configuration profile selects to which profile a subsequent action applies. A profile named Default is always present and contains the current parameters from the database. The following actions are available:ShowThe parameters for the selected profile are displayed when you tap the stylus on this button. For the Default profile, the publicly known password is shown—otherwise, the password is hidden.EditThe parameters of the selected profile can be edited when you choose the Edit button. Keep in mind that you cannot edit the Default profile.DeleteThe selected profile is deleted. You cannot delete the Default profile.ActivateWhen this button is chosen, the selected profile becomes the active profile. Activation is possible only if the Enable automatic configuration: checkbox is unchecked.
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual B-9Appendix B: Wireless Wide Area Network (WWAN)Tools MenuNewTapping on the New button allows you to create a new profile. Figure B.3 Creating A New ProfileThe name of the newly created profile must be different from all existing profiles. Also, the name cannot be Default. When the New Data Profile dialog box is opened, a proposal for a unique name is filled in the corresponding entry field. If a manually configured profile has a secret password and unauthorized access to the device is a concern even after the SIM PIN has been entered, the password should not be entered in the New Data Profile dialog box and the Prompt user for password checkbox should be checked instead. In this case, you will be prompted for the password each time a connection is initiated (the Connect Data button in the main Wireless WAN dialog box is selected).ResetThe Reset button in the New Profile and Edit Profile dialog boxes resets all entry fields to the values they had when the dialog box was opened.
Appendix B: Wireless Wide Area Network (WWAN)Tools MenuB-10 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User ManualAdvanced IPFigure B.4 Assigning IP InformationThe Advanced IP button in the Show Profile and Edit Profile dialog boxes opens another dialog box that allows you to configure a static IP address as well as the IP addresses for the primary and secondary DNS server.Security ConfigurationThe Security Configuration dialog box is accessed through the Tools menu. The Secu-rity Configuration dialog box allows you to enable, disable and change the PIN. You will need the current PIN to make any of these changes. The PIN must be enabled in order to be changed. (If the PIN is disabled, the New PIN entry field is greyed out.)Note: Keep in mind that some network operators do not allow the SIM PIN to be disabled. A new PIN must consist of 4 to 8 numeric digits.The Require PIN on resume checkbox is independent of the aforementioned settings. By default, this checkbox is unchecked. While this option remains unchecked, any PIN entered on startup or through the Security Configuration dialog box and submitted successfully to the modem is stored in memory for as long as the device is not rebooted. This stored PIN is then used without further user interaction whenever the modem requires a PIN (such as resume after suspend or modem removal). The stored PIN is also automatically entered in the Current PIN text box whenever the Security Configuration dialog box is called up. If unauthorized access to the device is a concern, the Require PIN on resume checkbox should be checked. In this case, the PIN is not stored; whenever a PIN is required, you will be prompted to enter an appropriate value.
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual B-11Appendix B: Wireless Wide Area Network (WWAN)Tools MenuNetwork ConfigurationIn the main Wireless WAN window:• Tap on the Tools menu, and choose Network.By default the GSM radio modem automatically chooses from the available and allowed net-works (allowed networks are the home network and all other networks with which the home network has a roaming agreement). You may find there are some situations in which you want to override this default behaviour. For example, you may want to disable roaming if you find yourself in a border area where the home network is not available but a foreign roaming partner is available. Abroad, you may find that an available network does not have GPRS roaming agreements. In this case, you’ll need to manually select the network which you know to support GPRS roaming.Automatic network selection is enabled or disabled by checking or unchecking Enable automatic network select in the Network dialog box. When automatic network selection is disabled, you must select a network manually.Available networks can also be viewed without changing any settings. Scanning for avail-able networks is a lengthy operation—a progress bar is shown while the scan is active. For every network that is found, the network name, country, status and numeric network identi-fier (MCC/MNC, Mobile Country Code followed by the Mobile Network Code) is dis-played.Notes: Your home network operator will need to let you know which other net-works have roaming agreements. Even when a network is listed with an ‘Available’ status, it does not necessarily follow that it can be used or that the roaming agreement covers GPRS. A status of ‘Forbidden’ indicates that the network cannot be used. If you choose a network that is not covered by a roaming agreement, the status in the main WWAN dialog box changes to ‘Emergency calls only’, ‘No net-work found’, ‘GPRS not available’ or ‘GPRS not allowed’.
Appendix B: Wireless Wide Area Network (WWAN)Tools MenuB-12 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User ManualDriver Mode ConfigurationBy default, the Wireless WAN driver is enabled (the Enable driver checkbox is checked). The driver must be disabled in order to use the modem for anything other than GPRS (e.g. dial-up data, fax, or in order to manually submit AT commands to the modem for develop-ment, testing, approvals, etc.). If the Enable driver checkbox is not checked, the driver is shut down as soon as the OK button in the Driver Mode dialog box is chosen. If, on the other hand, the Wireless WAN driver is not running and the Enable driver check-box is checked, the Wireless WAN driver is started as soon the Driver Mode dialog box is closed using the OK button. Note: When the driver is not running, no network status or signal strength can be displayed.Since all currently supported GSM modems are automatically detected, the Enable auto-matic port detection checkbox should always be checked. If this checkbox is not checked, a serial port can be selected manually. This experimental feature allows the driver to be used with an internal GSM modem that was not recognized by the automatic detection or an external GSM modem connected to a serial port of the computer through USB or through Bluetooth. An external modem connected to a serial port must support 115.2kbit/s, 8bit, no parity and hardware flow control.Modem InformationThe fields in this dialog box cannot be edited, they only display information about the com-puter’s modem. If the network operator has not programmed a user’s phone number into his SIM, the Phone: field remains empty. If the main menu shows an error status, at least partial modem information may be available.
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual B-13Appendix B: Wireless Wide Area Network (WWAN)SMS MenuB.1.5 SMS MenuSMS functions are accessed through the SMS menu. For modems that support a SIM card, the SIM initialization typically takes longer than the network initialization, resulting in a noticeable delay before the SMS functions become available. NewTapping on the New button opens a dialog for sending a new SMS message. The recipient's phone number (to be entered in the To: field) can consist of the digits 0 through 9, as well as the * and # characters, optionally preceded by one + character, indicating an international number (i.e. the country code follows immediately after the + character). By checking the Store message in Outbox field a new message can be stored in the Outbox before being sent. If no storage space is available, or the modem does not support the storage of outgoing messages, then this checkbox is disabled.InboxTapping on the Inbox button opens the list of received messages. Reading 50 messages, for example, from the SIM can take about 30 seconds. By default the list of messages is sorted with the most recently received message first. The list can be sorted by any other column by clicking on the corresponding column heading. Clicking the same column heading twice reverses the sort order. Pressing any letter or digit moves the highlight to the next message whose address begins with that letter or number. Note: The date and time formats can be changed through the Region and Language menu in Control Panel. For a new date or time format to take effect the Inbox has to be closed and re-opened. The Open button opens the selected message in a new window such that the entire message can be read including the original formatting (line breaks are replaced by spaces in the Inbox
Appendix B: Wireless Wide Area Network (WWAN)Power ModeB-14 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manualmessage list). Pressing the Reply button opens the new message dialog as described above, except the destination phone number is filled in already.OutboxTapping on the Outbox button opens the list of sent messages. Otherwise the Outbox behaves exactly as the Inbox described above. The date and time when a message was sent is not available for GSM modems.SMS ConfigurationTapping on the SMS Configuration button opens the SMS configuration dialog. The SMS Centre address follows the same rules as the recipient's phone number in the New message dialog. The message validity period parameter is sent to the SMS Centre with each message sent subsequently and instructs the SMS Centre on how long it should attempt to deliver the message to the recipient (the SMS Centre may impose an upper limit on the validity period regardless of the setting). Note: Only certain discrete validity period values can be sent and thus the validity period is rounded to the nearest allowed value. The next time the SMS configuration dialog is opened the rounded value is shown. The user interface tries to keep the SMS storage location available for a new incoming message if the Delete oldest message when full checkbox is checked. In this case, when a new message arrives and the SMS storage becomes full, the oldest received message is deleted. If any string is entered as the Message Suppression Prefix, then messages beginning with that string will not be shown in either the Inbox or Outbox. In this way messages intended for another application running on the same device can be hidden from the user, as long as those messages begin with the string configured here.B.2 Power ModeThe power mode of the modem is controlled through the Power menu in the Control Panel (not through the Wireless WAN user interface). For CF Card modems, the settings are found under the Devices tab. If the checkbox for a modem is unchecked then no power is applied to the modem and no driver is loaded (neither the serial port driver nor the Wireless WAN driver). If the checkbox is checked then power is applied to the modem and the drivers are loaded when the computer is turned on. Power is removed from the modem when the computer enters suspend mode.
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual IINDEXAAccepted Start Char 177accessoriesbelt loop (carrying case) 218carrying case 218desktop docking station 223Ethernet adaptor cable 227hand strap 215holster, soft shell 220pistol grip 217port replicator 238quad battery charger 229quad docking station 232single battery charger 228swivel belt loop (carrying case) 218vehicle cradle 235Active Conn Tab 117ActiveSync 227ASync profile 113Adaptive Windowing 194adaptor cableUSB-Ethernet 227Addendum 182, 195, 196Addendum Add-on 2 157, 158, 159, 160, 182Addendum Add-on 5 157, 158, 159, 160, 182Addendum Required 157, 158, 159, 160Addendum Separator 157, 158, 159, 160aiming dot, duration of 137ALT Key 41appearance (display colour scheme) 89Append 156appending to bar codescharacters 145, 201approvals, WORKABOUT G2 (including scanner) 243arrow keysmoving the cursor 40ASCIIFull Ascii 176audio indicatorsbeep conditions 46volume adjustment 47Authentication, Bluetooth Controls 114Auto Exposure (Imager) 192Aztec, 2D 198Bbacklightdisplay 87intensity 44keyboard 44backup battery (ML2032) 12backup profile, creating (Total Recall) 125backup profile, restoring (Total Recall) 129Bad Scan Beep 202bar codeappending to 145, 201displaying type of bar code 201parameters 136prefix character 143, 144stripping characters 143, 145suffix character 143, 145symbologiesCodabar 149, 161, 183, 196Code 11 163, 185Code 128 144, 194Code 39 194Code 93 148, 160, 182, 196Discrete 2 of 5 151, 165, 187EAN 13 144, 157, 179, 195EAN 8 145, 158, 180, 195IATA 2 of 5 164Interleaved 2 of 5 150, 163, 185, 197Matrix 2 of 5 164, 186MSI Plessey 149, 162, 184UPC A 145, 158, 180, 196UPC E 146, 159, 181, 196Translation tab 203Barcodes Must Decode 191batteries
II WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User ManualIndexa description of 221backup (ML2032) 12capacity dialog box 101charging 11, 37gauge 48installing 36installing main battery 12main battery 11power saving suspend dialog box 101removing 36run time 49storing 50swap time 37battery chargersafety instructions 222–223beeperbeep conditions 46volume adjustment 47belt loop, swivel (carrying case) 218Bi-Direction Redundancy 139BKSP (DEL Key) 41Bluetooth radiochanging device name 117device service profiles 113ISM band 111PINs for devices 114radio configuration 111Bluetooth setup 111GPRS setup 118peripherals 239Bluetooth specs 244BooStconsole (cold reset) 32Bright For (backlight) 88BSP, Bluetooth Controls 118Ccable diagrams C-1calibrating (touchscreen) 45, 105Captures Per HW Trigger 192case, carrying 218Center Bar Code Only (Imager) 190CH, Bluetooth Controls 114changing password (Start Menu security) 65charactersappending to bar codes 145prefix 143, 144stripping 143, 145suffix 143, 145chargerdescriptions of 38safety instructions 222–223chargers 221desktop docking station 223installing at a site 221operator controls 222quad battery charger (WA3004) 229single battery 228charging (main battery) 11Check Char 155, 161, 162, 164Check Digit 157, 158, 159check digit 150, 163Check Digit, One 150, 163Check Digits (MSI Plessey) 150, 163Check Digit Verification 142, 177, 179, 184, 185, 186, 187Check Digit Verification (Codabar) 183Check Digit Verification (I 2 of 5) 151cleaning hand-held 52clean start 32Click Data (scanner double-click) 201Click Time (scanner double-click) 201CLSI Editing 149CLSI Library System 183Codabar 149, 161, 183, 196Codabar 149Codablock 170, 190Code 11 163, 185Code 128 194Code 128 144, 156, 178Code 128 Emulation 153, 189Code 16K 169Code 32, Convert To 141Code 32 Prefix 141Code 39 141, 155, 176Code 49 170Code 93 148, 160, 182, 196Code 93 148cold reset 32Cold Reset (Shutdown menu) 71COM, Bluetooth Controls 118Command Prompt 66communicationActiveSync 227Ethernet connection (desktop dock) 227Ethernet connection (quad dock) 232WORKABOUT to PC 226Communities 207Composite 152, 167, 197
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual IIIIndexConcatenation 162connection list table, Bluetooth Controls 117Constant Illumination 194Contact 206Continuous Scan Mode 138, 154, 175, 190control panelaccessing 81basic setup 87Display Properties 87icons 83keyboard properties 90power management properties 100stylus properties 104Conv. UPC-E To UPC-A 147Conv. UPC-E1 To UPC-A 147Convert To Code 32 141Convert To EAN 13 151, 180, 181Convert To UPC -A 181cradle See also Picker cradle 235CTRL Key 41cycle tasks 68DData Matrix, 2D 170, 198Decoded (HHP) parameters 154decoded (internal) scanner parameters 137decoded Intermec (ISCP) parameters 175Decode Performance 142, 144Decode Performance Level 143, 144Decoder Timeout 193DEL (BKSP) Key 41Delete Char Set ECIs 140DemoImager 67Scanner 67Signature 67desktop connection, remote 81desktop docking station (WA4002) 223Device Name, changing 117dialog box, using 72Diff Read Timeout 176digitcheck digit 150, 163Dim For (backlight) 89Discrete 2 of 5 151, 165, 187Discrete 2 of 5 151, 165dismounting partitions 132displayappearance (colour scheme) 89backlight 87backlight, adjusting 44Display Properties 87Display Properties 87docking device icons 49docking stationuploading data using 51docking stations 221desktop docking station 223installation at site 221operator controls 222quad dock 232Dot Time 137, 191double-clickappending characters to a decodedbar code 201scanner trigger 201Double-Click, Manage Triggers menu 107Double-Tap (stylus settings) 105DSSS, 802.11g radio 244DUN service, Bluetooth 113Duration 137EEAN 13 144, 157, 179, 195EAN 8 145, 158, 180, 195EAN-8 Zero Extend 145ECI Decoder 141Enable Bookland (UPC-EAN) 147Enable CC-AB 153Enable CC-C 153Enable Plessy 184Enable RSS Expanded 152, 166, 188Enable RSS Limited 152, 166, 188Enable RSS-14 152, 188Enable SNMP 207Enable TLC-39 153, 168Encryption, Bluetooth Controls 114ESC Key 41EV15 Specs 247EV15 1D imager scanner specs 247FFactory Defaults On Reboot 192Fast Converge (Imager) 193features, WORKABOUT PRO G2 7Field Size 143Field Size/Chars (bar code scanning) 143
IV WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User ManualIndexFNC1 Conversion 178formattingentire memory card 129partitions 132Full Ascii 176Full ASCII (decoded scanner) 142, 156Function Keysaccessing 42GGood Scan Beep 202GPRS (bluetooth) 118GSM/GPRS E-1–E-12GS1-128 178GS1 128 (Composite bar code) 167GS1-128 GS1 US 144GS1-128 Identifier 178GTIN Compliant 178, 182Hhand strap 215holster, soft shell 220IIATA 2 of 5 164ImagerEV15 specs 247imager parameters 190indicatorsbattery gauge 48docking devices 49LED functions 46modifier keys 48onscreen 47security level 49task bar 61Wireless WAN 49802.11radio signal quality 49Input Panel (control panel) 83Intensity (7035 backlighting) 88Interleaved 2 of 5 150, 163, 185, 197Internet Explorer 66IP address, assigning (Summit) 13ISBN Conversion 157, 180ISBT Concat Any Pair 179ISBT Concatenation 156ISBT Concat Transmit 178ISBT 128 144, 178ISM band, Bluetooth radio 111Kkeyboardkey repeat 90, 91one shot mode 9236-key keyboard 4358-key 42keyboard backlight 44keyboard keys 39ALT 41arrow keys 40BKSP 41CTRL 41DEL 41ESC 41macro keys 42, 93modifiers 39navigating using the keyboard 57one shot mode 92SCAN 41SHIFT 40SPACE 41TAB 41Keyboard Properties 90, 91backlight 91one shot mode 92Key Repeat tab 90keysalpha keys, 36-key keyboard 43LLANAccessUsingPPP service, Bluetooth 113Laser On Time 138, 154, 175LEDfunctions 46Length Mode 184, 186, 187LIF (Low Insert Force) port pinout B-1Linear Decode 148Linear Security Level 138Location 207Low Power Timeout 138, 155, 176L1, Set Length 142L2, Set Length 142MMacro keysaccessing 42executing a macro 94Macros menu, accessing 93recording and saving 93maintenance (of hand-held) 52
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual VIndexManage Triggers 106Matrix 2 of 5 164, 186Max Gain (Imager) 193Max Illumination (Imager) 193Maximum Length 155, 157, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173, 174Max Integration (Imager) 193Max Number Barcodes 191memory cardcreating partitions 130formatting entire 129formatting partition 132messagesScan Indicator 201scanner warning message 201Scan Result 201Micro PDF-417 153, 169, 189, 198Minimum Cancel Time 138, 154, 175Minimum Length 155, 157, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173, 174, 177, 179, 183, 184, 185, 187, 188Min Scan Duration 192modem using VPN clients E-7modifier keys 39locking 40One Shot Mode 92unlocking 40mounting partitions 133MSI Plessey 149, 162, 184NName 208name servers, assigning (Summit) 16NOTIS Editing 149NQuerty Retry, Bluetooth Controls 118OOff & On buttons 38On & Off button 12, 38One Check Digit 150, 163One Shot Mode 92ON For 91Output (Telepen) 165PParameter Scanning 138, 155, 157, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173, 174, 176, 177, 178, 179, 182, 183, 184, 185, 186, 187, 188partitionscreating 130deleting 132dismounting 132formatting 132management 132mounting 133PC, connecting WORKABOUT to 226PDF-417 153, 168, 189, 197Pharmaceutical 156picker cradleinstalling cable 236PIN, Bluetooth Controls 113pinouts C-1PINs, Bluetooth devices 114pistol grip 217Plessey Maximum Length 163Plessey Minimum Length 163Plessy Transmit Check Digit 184pocket PC compatibility 81port pinouts C-1Port Prefix, Bluetooth Controls 118port replicator 238portsLIF (Low Insertion Force) B-1tether B-2PosiCode 167PostalAustralian 173Canadian 173China 173Japanese 173Kix 174Korean 174PlaNET 172, 199PostNET 172, 199Royal 174, 200powering up 12Power Management Properties 100battery capacity 101suspend, power saving 101Power Source 101Prefix 140Prefix Char 143, 144Printer (serial service), Bluetooth 113profile, creating backup 125profile, restoring backup 129Programs
VI WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User ManualIndexCommand Prompt 66Internet Explorer 66Remote Desktop Connection 66Windows Explorer 66protective case 218punctuation marks, accessing (SHIFT Key) 40Qquad battery charger 229quad dock (WA4004) 232RradioBluetooth 111Bluetooth specs 244IP address (Summit), assigning 13name servers (Summit) 16RA2041 radio specifications 244specifications 244802.11g Direct Sequence SS 244802.11signal quality 49radio specifications 244Raster Expand Rate (2D) 140Raster Height (2D) 140RA2041 radio specifications 244Reading Range 177, 179, 182, 186recalibrating (touchscreen) 45, 105remote connect 81Remote Desktop Connection 66Repeat Delay (between key repeats) 91Repeat Rate (of key repeats) 91Repeat tab (key repeat settings) 90resetting the WORKABOUTclean start 32resetting the WORKABOUT PRO G2BooSt menu, accessing 32warm reset 31Rights 208RSS Code 152, 166, 188, 197Run (Start Menu) 70Ssafety instructionsbattery charger 222–223Same Read Timeout 176Same Read Validate 176Scan Data Format 140Scan Indicator 201SCAN Key 41Scan Log File 202scannerBi-Direction Redundancy 139CLSI Editing 149Codabar 149Code 39 141Continuous Scan Mode 138Conv. UPC-E To UPC-A 147Conv. UPC-E1 To UPC-A 147decoded (internal) 137decoded Intermec (ISCP) 175EAN-8 Zero Extend 145Enable Bookland 147imager 190Laser On Time 175Linear Security Level 138Low Power Timeout 138Minimum Cancel Time 138NOTIS Editing 149Parameter Scanning 138Security Level 148Supp. Redundancy 147Supplementals 147UPC-A Check Digit 145UPC-A Preamble 146UPC-EANI 147UPC-E Check Digit 146UPC-E Preamble 146UPC-E1 Check Digit 146UPC-E1 Preamble 1462D UPC Half Block Stitching 148scanner module (SE 955)specs 245scanningaiming (target) dot duration 137appending characters 145, 201Bad Scan Beep 202check digit 150, 163Check Digits (MSI Plessey) 150, 163Check Digit Verification 142Check Digit Verification (I 2 of 5) 151Click Data (appending data) 201Click Time 201Code 128 144, 156, 178Code 128 Emulation 153Code 32 Prefix 141Code 39 155, 176Code 93 148Composite 152Convert To Code 32 141Convert To EAN 13 151Decoded (HHP) 154
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual VIIIndexDecode Perf. Level 143, 144Decode Performance 142, 144Delete Char Set ECIs 140Discrete 2 of 5 151Dot Time 137double-click 201ECI Decoder 141Enable CC-AB 153Enable CC-C 153Enable RSS Expanded 152Enable RSS Limited 152Enable RSS-14 152Enable TLC-39 153, 168Full ASCII 142, 156Good Scan Beep 202Laser On Time 138, 154Linear Decode 148Micro PDF-417 153PDF-417 153PostalPlaNET 199PostNET 199Royal 200Prefix 140prefix character 143, 144removing characters 143, 145RSS Code 152Scan Data Format 140Scan Indicator 201Scan Log File 202Scan Result 201Scan Result Time 201Set Length L1 142Set Length L2 142specifications 245specifications, imager 248Suffix 140suffix character 143, 145symbologies 136target (aiming) dot duration 137Translations tab 203Transmit Check Digit 142Transmit Check Digit (I 2 of 5) 151Transmit Check Digit (MSI Plessey) 150Transmit Code 1D Char 140Trioptic Code 39 156Trioptic Code 39, Enable 141UPC-EAN Shared Settings 160, 1812D Maxicode 1982D QR Code 198Scanning Mode (2D) 139Scan Result 201Scan Result Time 201screenstylus, using to navigate 57touch pen, using 57Windows CE, navigating 57SCU (Summit Client Utility) 13Config Tab 20configuring 17Diags (Diagnostics) Tab 30EAP Credentials 25EAP Types 23, 25Global Settings Tab 26IP, assigning 13Main Tab 17, 20security 23Status Tab 29ThirdPartyConfig 26Windows Zero Config (WZC) 26WLAN, connecting to 13SD/MMC Card, inserting 51Security Level 148security level icon 49Security Settings 64changing password 65configuring taskbar 66level 65Supervisor 65Teklogix 65User 65Servers, Bluetooth Controls 115Services, Bluetooth Controls 113Set Length L1 142Set Length L2 142Set PIN, Bluetooth Controls 114SettingsControl Panel 69Network and Dial-up connections 69Run 69Taskbar and Start Menu 69SE 955 scanner specs 245SHIFT Key 40ShutdownCold Reset 71Suspend 71Warm Reset 71Shutdown (Start Menu) 71signal quality, 802.11 49Simple Network Management (SNMP) See SNMP 205single battery charger (WA3001) 228
VIII WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User ManualIndexSIP (Soft Input Panel 83Sled See vehicle cradle. 235SMS Configuration E-14SNMP (Simple Network Management Protocol) 205Communities 207Contact 206Enable SNMP 207Location 207Name 208Rights 208Soft Input Panel (SIP) 83Soft Scan Timeout 202SPACE Key 41specificationsSE 955 scanner 245Start/Stop Transmit 161, 177, 183Start Menu 63cycle tasks 68desktop 64programs 66Run 70Security 64Settings 69Shutdown 71system tray 68task manager 69Strip Leading 143, 145Strip Start/Stop Chars 155Strip Trailing 143, 145stylus (touch pen), using 57Stylus Properties 104Double-tap (stylus sensitivity) 105Suffix 140Suffix Char 143, 145Summit Client Utility (SCU) 13Supervisor security level 65Supp. Redundancy (Code 128) 147Supplementals (UPC-EAN) 147Suspend (Shutdown menu) 71Suspend Timeout 102swap time (for battery) 37swivel belt loop (carrying case) 218symbologies, bar code 136system tray 68TTAB Key 41target dot, duration of 137taskbaronscreen indicatorsbattery gauge 48docking devices 49modifier keys 48security level 49Wireless WAN 49802.11 radio signal quality 49using 61task manager 69Teklogix security level 65TekTerm application 81Telepen 165, 188tether port pinout B-2text conventions 4TLC-39 168Total Recallbackup profile, creating 125backup profile, restoring 129touch pen, using 57touchscreenrecalibration 45, 105stylus, using 57touch pen, using 57Translations parameters (bar codes) 203Transmit Check Digit 177, 180, 181, 183, 184, 185, 186, 187Transmit Check Digit (I 2 of 5) 151Transmit Check Digit (MSI Plessey) 150Transmit Code 1D Char 140Transmit Number System 159, 160, 180, 181trigger mappings 107Trigger-Press Type, Manage Triggers menu 109triggers, configuring 106Trioptic Code 39 156Trioptic Code 39, Enable 141UUPC A 145, 158, 180, 196UPC-A Check Digit 145UPC-A Preamble 146UPC E 146, 159, 181, 196UPC-EAN 147UPC-EAN Shared Settings 160, 181UPC-E Check Digit 146UPC-E Preamble 146UPC-E1 Check Digit 146UPC-E1 Preamble 146
WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual IXIndexUPC Half Block Stitching, 2D 148USB-Ethernet adaptor cable (WA4010) 227User security level 65Use Virtual Serial Port E-7Vvehicle cradle 235powered 10-55 VDC 235powered 12 VDC 235unpowered 235Wwarm reset 31Warm Reset (Shutdown menu) 71warnings 201Window Height 191Windows® Start Menu See Start Menu 63Windows CEdialog box 72files, folders, & programs, working with 58Windows CE, navigating in 57Windows Explorer 66Windows Zero Config (WZC) 26Window Width 191Wireless WAN E-1–E-12SMS Configuration E-14Use Virtual Serial Port E-7Wireless WAN icon 49WORKABOUT G2approvals 243WZC (Windows Zero Config) 262D Aztec 1722DAztec 1982D Data Matrix 170, 1982D Maxicode 171, 1982D QR Code 171, 1982D Raster Expand Rate 1402D UPC Half Block Stitching 14836-key keyboardalpha keys, accessing 43uppercase letters, creating 4358-key keyboard 42802.11g radio 244
WORKABOUT PRO Hand-Held ComputerRegulatory & Warranty GuideFebruary 21, 2007 PN 8000126.AISO 9001 CertifiedQuality Management System
© Copyright 2007 by Psion Teklogix Inc., Mississauga, Ontario, CanadaThis document and the information it contains is the property of Psion Teklogix Inc., is issued in strict confidence, and is not to be reproduced orcopied, in whole or in part, except for the sole purpose of promoting the saleof Psion Teklogix manufactured goods and services. Furthermore, this docu-ment is not to be used as a basis for design, manufacture, or sub-contract, orin any manner detrimental to the interests of Psion Teklogix Inc.All trademarks are the property of their respective holders.
Return-To-Factory WarrantyPsion Teklogix provides a return to factory warranty on this product for aperiod of twelve (12) months in accordance with the statement of Warrantyand Product Support provided at: www.psionteklogix.com/warranty. The warranty on Psion Teklogix manufactured equipment does not extend toany product that has been tampered with, altered, or repaired by any personother than an employee of an authorized Psion Teklogix service organization.See Psion Teklogix terms and conditions of sale for full details.Important: Psion Teklogix warranties take effect on the date of shipment.Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/ECThis Product, and its accessories, comply with the requirements of the WasteElectrical and Electronic Equipment (WEEE) Directive 2002/96/EC. If your end-of-life Psion Teklogix product or accessory carries a label asshown here, please contact your local country representative for details onhow to arrange recycling. For a list of international subsidiaries, please go to:http://www.psionteklogix.com/EnvironmentalComplianceRestriction on Hazardous Substances (RoHS) Directive 2002/95/ECWhat is RoHS?The European Union has mandated that high environmental standards be metin the design and manufacture of electronic and electrical products sold inEurope, to reduce hazardous substances from entering the environment. The“Restriction on Hazardous Substances Directive (RoHS)” prescribes the max-imum trace levels of lead, cadmium, mercury, hexavalent chromium, andflame retardants PBB and PBDE that may be contained in a product. Onlyproducts meeting these high environmental standards may be “placed on themarket” in EU member states after July 1, 2006.
RoHS LogoAlthough there is no legal requirement to mark RoHS-compliant products,Psion Teklogix Inc. indicates its compliance with the directive as follows: The RoHS logo located either on the back of the product or underneath thebattery in the battery compartment (or on a related accessory such as thecharger or docking station) signifies that the product is RoHS-compliant as perthe EU directive. Other than as noted below, a Psion Teklogix product thatdoes not have an accompanying RoHS logo signifies that it was placed on theEU market prior to July 1, 2006, and is thereby exempt from the directive.Note: Not all accessories or peripherals will have a RoHS logo due to physical space limitations or as a result of their exempt status. DisclaimerEvery effort has been made to make this material complete, accurate, and up-to-date. In addition, changes are periodically added to the information herein;these changes will be incorporated into new editions of the publication. Psion Teklogix Inc. reserves the right to make improvements and/or changesin the product(s) and/or the program(s) described in this document withoutnotice, and shall not be responsible for any damages, including but not lim-ited to consequential damages, caused by reliance on the material presented,including but not limited to typographical errors.
Psion Teklogix WORKABOUT PRO Regulatory & Warranty Guide 1Table Of Contents 1. Declaration Of Conformity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22. Safety Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23. The Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94. Support Services & Worldwide Offices . . . . . . . . . . . . . . . . . . . . . . 114.1 Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114.2 Product Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124.3 Worldwide Offices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2 Psion Teklogix WORKABOUT PRO Regulatory & Warranty Guide1. Declaration Of Conformity Declaration of Conformity documents are provided at:www.psionteklogix.com/DoC2 . S a f e t y S u m m a r y CE MarkingWhen used in a residential, commercial or light industrial environment the product and its approved UK and European peripherals fulfil all requirements for CE marking.R&TTE Directive 1999/5/ECThis equipment complies with the essential requirements of EU Directive 1999/5/EC (Declaration available: www.psionteklogix.com/DoC).Cet équipement est conforme aux principales caractéristiques définies dans la Directive européenne RTTE 1999/5/CE. (Déclaration disponible sur le site: www.psionteklogix.com/DoC).Die Geräte erfüllen die grundlegenden Anforderungen der RTTE-Richtlinie (1999/5/EG). (Den Wortlaut der Richtlinie finden Sie unter: www.psiontek-logix.com/DoC).Questa apparecchiatura è conforme ai requisiti essenziali della Direttiva Europea R&TTE 1999/5/CE. (Dichiarazione disponibile sul sito: www.psionteklogix.com/DoC).Este equipo cumple los requisitos principales de la Directiva 1995/5/CE de la UE, “Equipos de Terminales de Radio y Telecomu-nicaciones”. (Declaración disponible en: www.psionteklogix.com/DoC).Este equipamento cumpre os requisitos essenciais da Directiva 1999/5/CE do Parlamento Europeu e do Conselho (Directiva RTT). (Declaração disponível no endereço: www.psionteklogix.com/DoC).Ο εξοπλισμός αυτός πληροί τις βασικές απαιτήσεις της κοινοτικής οδηγίας EU R&TTE 1999/5/EΚ. (Η δήλωση συμμόρφωσης διατίθεται στη διεύθυνση: www.psionteklogix.com/DoC)
Psion Teklogix WORKABOUT PRO Regulatory & Warranty Guide 3Deze apparatuur voldoet aan de noodzakelijke vereisten van EU-richtlijn betreffende radioapparatuur en telecommunicatie-eindappa-ratuur 199/5/EG. (verklaring beschikbaar: www.psionteklogix.com/DoC).Dette udstyr opfylder de Væsentlige krav i EU's direktiv 1999/5/EC om Radio- og teleterminaludstyr. (Erklæring findes på: www.psionteklogix.com/DoC).Dette utstyret er i overensstemmelse med hovedkravene i R&TTE-direktivet (1999/5/EC) fra EU. (Erklæring finnes på: www.psionteklogix.com/DoC).Utrustningen uppfyller kraven för EU-direktivet 1999/5/EC om ansluten tel-eutrustning och ömsesidigt erkännande av utrustningens överensstämmelse (R&TTE). (Förklaringen finns att läsa på: www.psionteklogix.com/DoC).Tämä laite vastaa EU:n radio- ja telepäätelaitedirektiivin (EU R&TTE Directive 1999/5/EC) vaatimuksia. (Julkilausuma nähtävillä osoitteessa: www.psionteklogix.com/DoC).PSION TEKLOGIX tímto prohlašuje, že tohle mobilní zařízení je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1995/5/ES (NV č. 426/2000 Sb.) a Prohlášení o shodě je k dispozici na www.psionteklogix.com/DoC. Toto zařízení lze provozovat v České republice na základě generální licence č. GL - 12/R/2000. PSION TEKLOGIX týmto vyhlasuje, že toto mobilné zariadenie spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1995/5/ES (NV č. 443/2001 Z.z.) a Vyhlásenie o zhode je k dispozícii na www.psionteklogix.com/DoC. Toto zariadenie je možné prevádzkovať v Slovenskej republike na základe Všeobecného povolenia č. VPR-01/2001. Настоящото устройство е в съответствие с основните изисквания на европейската Директива 1999/5/EC (Декларацията за съответствие може да бъде намерена на адрес: www.psionteklogix.com/DoC)
4 Psion Teklogix WORKABOUT PRO Regulatory & Warranty Guide Use of the 802.11 device in France: Owing to French Government restrictions, the 802.11 device are limited to indoor use. They may be used outdoors, on private property, only with prior authorization from the French Ministry of Defense. Acest echipament satisface cerinţele esenţiale ale Directivei UE 1999/5/EC (Declaraţia poate fi gasitã pe site-ul: www.psionteklogix.com/DoC) Oprema je skladna z bistvenimi zahtevami EU direktive 1999/5/EC (Deklaracija je na voljo: www.psionteklogix.com/DoC) Käesolev seade vastab EU Direktiivile 1999/5/EC (selgitus saadaval: www.psionteklogix.com/DoC) Az eszköz megfelel az EU 1999/5/EC fő direktíváinak (a nyilatkozat megtalálható: www.psionteklogix.com/DoC) Šī aparatūra nodrošina nepieciešamas ES Direktīvas prasības (Deklarācija ir pieejama: www.psionteklogix.com/DoC) Įranga atitinka pagrindinius EU direktyvos 1999/5/EC reikalavimus (Deklaraciją galima rasti www.psionteklogix.com/DoC) Dan l-apparat huwa konformi mal-kriterji tad-direttiva ta' l- EU 1999/5/EC(Din id-dikjarazzjoni tista ssiba fuq is sit www.psionteklogix.com/DoC) To urządzenie spełnia wymagania zasadnicze dyrektywy Unii Europejskiej 1999/5/EC (Deklarację zgodności można znaleźć pod adresem internetowym www.psionteklogix.com/DoC) !
Psion Teklogix WORKABOUT PRO Regulatory & Warranty Guide 5FCC Information To UsersFederal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. How-ever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer-ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.IMPORTANT NOTE:FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment under 47 CFR 2.1093 paragraph (d)(2), for use in a PDA. End users must follow the specific operating instructions for satisfying RF exposure compliance.
6 Psion Teklogix WORKABOUT PRO Regulatory & Warranty GuideThis transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Some equipment in hospitals and aircraft are not shielded from radio fre-quency energy. Do not use the device onboard aircraft, or in hospitals, with-out first obtaining permission.Do not use near pacemakers. The product may affect the operation of some medically implanted devices such as pacemakers, causing them to malfunc-tion. Avoid placing your product next to such devices. Keep a minimum dis-tance of 20 cm between the device and the product to reduce the risk of interference. If you have any reason to suspect that interference is taking place, turn off the device and contact your cardiologist for assistance. Forbody worn operation, this device has been tested and meets the FCC RFexposure guidelines for use with an accessory that contains no metal andthe positions the handset at a minimum 1.5cm from the body. Note: To maintain compliance with the FCC RF exposure guidelines, if you wear the device on your body, use the Psion Teklogix approved carrying case. Use of non-approved accessories may violate FCC RF exposure guidelines.Emissions Information For CanadaThis Class B digital apparatus meets all requirements of the Canadian Inter-ference-Causing Equipment Regulations. When using the 802.11 radio option, to prevent radio interference, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.Cet appareil numérique de la classe B respecte toutes les exigences du Règle-ment sur le matériel brouilleur du Canada. En cas d’utilisation du module radio 802.11, afin d'éviter toute interférence radio avec le service autorisé, l'appareil doit être utilisé à l'intérieur, tout en tant éloigné de toute fenêtre afin de garantir le maximum de protection. Si cet équipement (ou son antenne émettrice) est installé à l'extérieur, il est alors soumis à licence.Warning for AustraliaThe user needs to switch off the device when exposed to areas with potentially explosive atmospheres such as petrol stations, chemical storage depots and blasting operations.
Psion Teklogix WORKABOUT PRO Regulatory & Warranty Guide 7Warning to Users This product is a Class I/Class II laser product according to CDRH 21 CFR 1040.10 and 1040.11 and Class1/Class 2 laser product according to IEC 60825-1:1993+A1:1997+A2:2001Laser WarningsFor your own safety, it is critical that you comply with the following warnings:Caution!Do not look into the laser beam or point the beam at people or animals.Caution!Using controls or adjustments, or performing procedures other than those specified herein may result in hazardous radiation exposure.Caution!The use of optical instruments with this product will increase eye hazard.Do Not Operate In An Explosive AtmosphereOperating Psion Teklogix equipment where explosive gas is present may result in an explosion.Do Not Remove Covers Or Open EnclosuresTo avoid injury, the equipment covers and enclosures should only be removed by qualified service personnel. Do not operate the equipment without the covers and enclosures properly installed.Caution!Danger of explosion if a battery is incorrectly handled, charged, disposed of or replaced. Replace only with the same or equivalent type recommended by Psion Teklogix. Dispose of used batteries according to the instructions described in “The Battery” on page 9. Carefully review all battery safety issues.Vorsicht!Explosiongefahr bei unsachgemäßem Austausch der Batterie Ersatz nur durch denselben oder einen vom Hersteller empfohlenen gleichwertigen Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers.
8 Psion Teklogix WORKABOUT PRO Regulatory & Warranty GuideSafety Instructions for the following: • AC Wall Adaptor,• Desktop Docking Stations, and •Tether CableFor your own safety, it is critical that you comply with the following warnings:Caution!Before use, read all safety instructions for the Docking Station, the hand-held and the AC Wall Adaptor.Caution!To avoid the risk of fire or personal injury, use only the Psion Teklogix recommended AC adaptor.Caution!Use of an attachment not recommended or sold by Psion Teklogix may result in fire, electric shock, or personal injury.Caution!To reduce risk of damage to the electric plug and cord when unplugging the charger, pull the plug rather than the cord.Caution!Make sure the cord is positioned so that it is not stepped on, tripped over, or otherwise subjected to damage or stress.Caution!Do not operate with a damaged cord or plug. Replace immediately.Caution!Do not operate if the device has received a sharp blow, been dropped, or otherwise damaged in any way; it should be inspected by qualified service personnel.Caution!Do not disassemble; repairs must be carried out by Psion Teklogix quali-fied service personnel. Incorrect reassembly may result in electric shock or fire.
Psion Teklogix WORKABOUT PRO Regulatory & Warranty Guide 9Caution!To reduce risk of electric shock, unplug the AC adapter from the outlet before attempting any cleaning.Caution!An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in fire or electric shock. If an extension cord must be used, make sure the plug pins on the extension cord are the same number, size, and shape as those on the adapter, the extension cord is properly wired and in good electrical condition and that the wire size is larger than 16 AWG.Caution!The AC adaptor is for indoor use only. Do not expose the AC adaptor to rain or snow.3. The Battery Battery must be fully charged before first use.Warning: Before charging or using the battery pack, it is critical that the safety information in this section be reviewed and that all warn-ings are strictly followed.BATTERIES ARE CONSIDERED HAZARDOUS WASTE. For proper disposal, forward all used batteries to one of:Psion Teklogix Inc. Psion Teklogix Corp. Psion Teklogix S.A.2100 Meadowvale Blvd. 1810 Airport Exchange Blvd. Parc Club Du Golf-Bat 1.Mississauga, Ontario Suite 500 13856 Aix-En-ProvenceCanada Erlanger, Kentucky Cedex 3L5N 7J9 USA 41018 France *The label of this device will be put under the battery compartment.
10 Psion Teklogix WORKABOUT PRO Regulatory & Warranty GuideWarning: TO PREVENT the battery from leaking acid, generating heat or exploding, adhere to precautions below.• The battery incorporates built-in safety devices. To ensure their proper function, do not disassemble or alter any parts of the battery.• Do not short-circuit the battery by directly connecting any of the exposed terminals with metal objects such as wire. Do not transport or store the battery together with metal objects such as necklaces, hair pins, etc.• Do not dispose of batteries in fire as they may explode or release toxic materials and cause burns.• Do not use or leave the battery near a heat source such as a fire or heater.• Do not immerse the battery in water.• When charging, use the battery charger specifically designed for the battery.• Do not pierce, strike, throw or step on the battery.• Do not directly solder the battery.• Do not connect the battery to an electrical outlet, vehicle cigarette lighter, etc.• Do not put battery into a microwave oven or pressurized container.• Do not use the battery in combination with primary batteries (such as dry-cell batteries) or batteries of different capacities or brands.• Immediately remove the battery from the device or battery charger and stop use if the battery gives off an odour, generates heat, becomes discoloured or deformed, or in any way appears abnormal during use.• Do not continue charging the battery if it does not recharge within the specified charge time.• The battery may burst or ignite if the battery leaks. Always ensure that it is away from any exposed flames. • If leaking electrolyte sprays into your eyes, rinse them with clean running water, and immediately seek medical attention.
Psion Teklogix WORKABOUT PRO Regulatory & Warranty Guide 11• Do not store the battery in extremely high temperatures (e.g., a vehicle, strong direct sunlight, etc.). This may cause the bat-tery to overheat or ignite, and it may also reduce the performance and service life of the battery.• Do not use in areas where static electricity is greater than what the manufacturer guarantees.• Keep batteries out of reach of children.4. Support Services & Worldwide Offices Psion Teklogix provides a complete range of product support services to its cus-tomers worldwide. These services include technical support and product repairs.4.1 Technical SupportFor technical support in North America:Call Toll free: +1 800 387 8898 Option 3, or Direct Dial: +1 905 813 9900 Ext. 1999 Option 3.For technical support in EMEA (Europe, Middle East and Africa), please contact the local office listed in the website below:http://www.psionteklogix.com/EMEASupportFor technical support in Asia, please contact the local office listed in the website below:http://www.psionteklogix.comTechnical Support for Mobile Computing Products is provided via email through the Psion Teklogix customer and partner extranets. To reach the web-site, go to www.psionteklogix.com, and click on the appropriate Teknet link on the home page. Then click on the “Login” button or the “Register” button, depending on whether you have previously registered for Teknet. Once you have logged in, search for the “Support Request Form”.
12 Psion Teklogix WORKABOUT PRO Regulatory & Warranty Guide4.2 Product RepairsFor repair service in North America:Call Toll free: +1 800 387 8898 Option 2 or Direct Dial: +1 905 813 9900 Ext. 1999 Option 2.For repair service in EMEA (Europe, Middle East and Africa), please contact the local office listed in the following website:http://www.psionteklogix.com/EMEASupportFor repair service in Asia, please contact the local office listed in the website below:http://www.psionteklogix.com4.3 Worldwide OfficesCOMPANY HEADQUARTERSPsion Teklogix Inc.2100 Meadowvale BoulevardMississaugaOntarioCanada L5N 7J9Tel: +1 905 813 9900Fax: +1 905 812 6300Email: salescdn@psion.comCANADIAN SERVICE CENTREPsion Teklogix Inc.7170 West Credit Ave., Unit #1Mississauga, OntarioCanada L5N 7J9Tel: +1 800 387 8898 Option 2 - or -Direct: + 1 905 813 9900 Ext. 1999 Option 2Fax: + 1 905 812 6304Web: www.psionteklogix.com
Psion Teklogix WORKABOUT PRO Regulatory & Warranty Guide 13NORTH AMERICAN HEADQUARTERS AND U.S. SERVICE CENTREPsion Teklogix Corp.1810 Airport Exchange BoulevardSuite 500Erlanger, KentuckyUSA 41018Tel: +1 859 371 6006Fax: +1 859 371 6422Email: salesusa@psion.comINTERNATIONAL SUBSIDIARIES (see also www.psionteklogix.com/Subsidiaries)Psion Teklogix S.A.La Duranne135 Rue Rene DescartesBP 42100013591 Aix-En-ProvenceCedex 3; FranceTel: +33 4 42 90 88 09Fax: +33 4 42 90 88 88E-mail: tekeuro@psion.com

Navigation menu