Pro Nets Technology WM71RL1 WIRELESS MINI PCI User Manual WM71RL1

Pro-Nets Technology Corporation WIRELESS MINI PCI WM71RL1

Users Manual

Wireless 54Mpbs MIMO Mini-PCI Adapter User’s Manual
USA Compliance statement to FCC This module complies with part 15 of the FCC rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 4.1 RF exposure compliance This module may be installed into any end product in mobile device applications. Because the module only radiates very low power levels, it complies with RF exposure requirements. Requirements to end product The following provisions for end product will be required on the FCC regulation, part 15. (1)Antenna Pro-Nets wishes that our customer shall use the WM71RL1 module without any modifications including antenna. If customer use a unique antenna, the FCC certification is required for the end product. (2) Markings To satisfy FCC exterior labeling requirements, the following text must be placed on the exterior of the end product. Contains Transmitter Module FCC ID: RXZ-WM71RL1 Any similar wording that expresses the same meaning may be used. (3) Caution to user for modification The following caution is expressed on the user manual. The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device. (4) Compliance statement to FCC The following statement is expressed on the user manual. This module complies with part 15 of the FCC rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesired operation.
Copyright1999 All Rights Reserved. No part of this document can be copied or reproduced in any form without written consent from the company. Trademarks: All trade names and trademarks are the properties of their respective companies. Revision History Revision History V1.0 First release Caution: This user guide information is only provided to OEM or module installer.Do not supply to the end user.
1Revision History Rev Date Maintain Descriptor0.0.1.0 03/31/05 Kathy Ko 1. Create RT61 ATE Driver 2. Start Frame OID change to RT_OID_802_11_START_TX_FRAMES 3. For High ChannelΚTX power value range is 0~36
Content1. SYSTEM REQUIREMENT.....................................................................................................................3 2. INSTALL ATE DRIVER ..........................................................................................................................3 3. RACONFIG UTILITY .............................................................................................................................9 3.1 BUILD RACONFIG UTILITY.................................................. ....................................................................9 3.1.1 Set Include file path......................................................................................................................................9 3.1.2 Set Library file path ....................................................................................................................... ............10 3.1.3 Set DDK path ............................................................................................................................................. 11 2
1. System Requirement ˙Windows 2000/XP ˙Microsoft Virtual C++ 6.0 ˙Platform SDK ˙DDK 3790 2. Install ATE Driver Step 1：Insert the RT61 Card bus / Mini PCI / PCI. Figure 2-1 Search New device. 3
Step 2：Select Advance installation. Figure 2-2 Select Advance installation Step 3：Select manual installation. Figure 2-3 Select manual installation 4
Step 4：Select device type：Network Adapter. Figure 2-4 Select device type Step 5：Select device driver from “Have Disk”Figure 2-5 Select device driver from “Have Disk” 5
Step 6：Select the ATE driver directory Figure 2-6 Select the ATE driver directory Step 7：Select Network Adapter. Figure 2-7 Select Network Adapter. 6
Step 8：Pop up the warning wizard for asking you if you really want to install the “RT2561, RT2661 ATE Driver”. Press “Continue Install”. Figure 2-8 asking you if you really want to install the deiver Step 9：Installing…Figure 2-9 Installing 7
Step 10：Complete the driver installation. Figure 2-10 Complete the driver installation. Step 11：Open Device Manager to check whether the ATE driver installs success. Figure 2-11 Open Device manager to check whether success 8
9RALINK RT61 ATE Driver User Guide & Release Note 3. RaConfig Utility3.1Build RaConfig Utility 3.1.1Set Include file pathStep 1ΚSelect ToolsÆOptionsStep 2ΚInsert the Microsoft SDK’s Include file path Figure 3-1 Set Include file path
10RALINK RT61 ATE Driver User Guide & Release Note 3.1.2Set Library file pathStep 1ΚSelect ToolsÆOptionsStep 2ΚInsert the Microsoft SDK’s Library file path Figure 3-2 Set Library file path
11RALINK RT61 ATE Driver User Guide & Release Note 3.1.3Set DDK pathStep 1ΚSelect Project Æ Settings Step 2ΚMake sure the path of Windows DDK 3790 is correct in “C/C++” tag of Project Settings.. Figure 3-3Check DDK path in C/C++ tag
12RALINK RT61 ATE Driver User Guide & Release Note Step 3ΚMake sure the path of Windows DDK 3790 is correct in “Link” tag of Project Settings. Figure 3-4 Check DDK path in Link tag

Navigation menu