Primax Electronics M7B301 Bluetooth Wireless Mouse User Manual BT Mouse UM

Primax Electronics Ltd Bluetooth Wireless Mouse BT Mouse UM

Manual

Bluetooth Mouse SetUser Manual
Bluetooth Mouse SetAbout this manualThank you for your purchase of this Bluetooth mouse set. This topics covered in this manual are listed as following.FIntroductionFInstalling and the BatteriesFInstalling and Uninstalling the WIDCOMM Bluetooth StackFSetting up the Optical MouseFUsing the Optical MouseFUsing the WIDCOMM Bluetooth StackFTroubleshooting
Bluetooth Mouse SetContentsIntroduction ................................................ 1Package List .....................................................................1Features ...........................................................................2Installing the Batteries ................................... 3Installing and Uninstalling the WIDCOMM Bluetooth Stack ......................................................... 4Installing the WIDCOMM Bluetooth Stack ........................4Uninstalling the WIDCOMM Bluetooth Stack ...................7Setting up the Optical Mouse ........................... 8Quick Pairing in Windows .................................................8Pairing on WIDCOMM Bluetooth Stack ..........................10Using the Optical Mouse ................................ 11Power Status of the Optical Mouse ................................11Using the WIDCOMM Bluetooth Stack .................12Using the Stack for the First Time ..................................12Connecting to the other HID Devices .............................13Troubleshooting .......................................... 14 FCC/ Industry Canada Notice .......................... 15
Bluetooth Mouse Set11 Introduction1.1 Package ListBefore you start using the set, check the following contents in your package. If anything is missing, contact your retailer.Optical Mouse AA Batteries x 2USB Bluetooth dongle User’s ManualUser's Manual
Bluetooth Mouse Set21.2 FeaturesOptical Mouse Features• With scroll wheel and two buttons• Power saving mode• LED indicatora. Red: dead batteryb. Flashing red and green: mouse is pairingUSB Bluetooth Dongle Features• Bluetooth specification v1.2 and v2.0 compliant• Supports mouse• Supports additional Bluetooth devicesSystem Requirements• Bluetooth / USB mouse supported computer• Microsoft Windows 98/ME/2000/XP or later
Bluetooth Mouse Set32 Installing the BatteriesThe mouse needs two AA size batteries. Follow the steps below to install the batteries.1. Press the button and the battery cover pops out.2. Install two "AA" batteries while observing the polarity (+ and -) indicated inside the mouse.3. Replace the battery cover.p
Bluetooth Mouse Set43 Installing and Uninstalling the WIDCOMM Bluetooth Stack3.1 Installing the WIDCOMM Bluetooth StackBefore installing the WIDCOMM Bluetooth stack, plug the USB Bluetooth dongle into a USB port of your computer.1. Insert the provided Installation CD in the CD ROM drive.2. The installation stack loads automatically. If not, click the Setup.exe in the bin folder of the CD ROM.3. The welcome screen introduces you to the installation process. Click Next to continue.
Bluetooth Mouse Set54. Read the agreement and select “I accept he terms in the license agreement”. Click Next to continue.5. The program will be installed in the folder as shown. Click Change to install in a different location. Click Next to continue.
Bluetooth Mouse Set66. Click Install to start the installation. The installation may need some time to complete.7. The following screen appears to indicate the installation is complete.8. Remove the dongle and plug it back in, the mouse will pair automatically. Click Finish to exit the installation.
Bluetooth Mouse Set7The following prompt requires you to restart the computer so that the Bluetooth stack takes effect. Click Yes to restart your computer now or No to restart later.3.2 Uninstalling the WIDCOMM Bluetooth StackFollow the steps below to uninstall the WIDCOMM Bluetooth stack from your computer.1. Remove the USB Bluetooth dongle.2. Click Start > Settings > Control Panel > Add/Remove Programs.3. Select WIDCOMM Bluetooth Software from the program list and click Remove.4. The system starts to remove the program, it may take some time to uninstall.5. When the program has been removed, a prompt requires you to restart the computer. Click Yes to restart your computer now or No to restart later.
Bluetooth Mouse Set84 Setting up the Optical Mouse4.1 Quick Pairing in WindowsThe Bluetooth mouse has been set to a pre-pairing mode as the factory default. For quick pairing, enable the pre-pairing mode following the steps below.1. Plug the USB Bluetooth dongle into a USB port of your computer.2. For the mouse, press the pairing button at its bottom.3. Press the button on the bottom of the USB Bluetooth dongle until the LED begins to flash once every second. This indicates the Bluetooth dongle has started to search for device to be paired.The first time you connect the mouse to your computer, the Found New Hardware Wizard will automatically launch. Cancel the Wizard and follow the steps below.• When pairing, the mouse LED lights red and green in turn.• The pairing settings will be cancelled if you press the mouse pairing button. To reconnect the mouse, press the USB Bluetooth dongle button again (Refer to the step3 above).Pairing buttonUSB Bluetooth dongle button
Bluetooth Mouse Set94. Move your mouse to ensure they are connected.Enabling the function of USB mouse in BIOSIf the mouse failed to work (refer to “7 Troubleshooting” on page 14 for more probable conditions), check that the USB function of the mouse has been enabled in the BIOS setup.Each time you turn on your computer, the mouse will be automatically detected.Some old PC systems do not support the USB keyboard/mouse in BIOS/DOS environment.
Bluetooth Mouse Set104.2 Pairing on WIDCOMM Bluetooth StackBefore using the Bluetooth stack for mouse pairing, install the stack as instructed in “3 Installing and Uninstalling the WIDCOMM Bluetooth Stack” on page 4. Then follow the steps below.1. Press the USB Bluetooth dongle button until the following Human Interface Device (HID) screen appears.2. When the mouse is connected, the following confirmation message appears. Click to confirm that the correct mouse is connected.To start the Bluetooth stack for the first time, see “6 Using the Stack for the First Time” on page 12 for more information.
Bluetooth Mouse Set115 Using the Optical MouseAfter plugging in the USB Bluetooth dongle and setting the mouse in the Bluetooth connection environment as described in “4 Setting up the Optical Mouse” on page 8, you can begin using the mouse immediately.5.1 Power Status of the Optical MouseThe Bluetooth mouse has a battery status LED. When the battery runs out, the LED turns red. You should change the batteries immediately.To view more detailed information on the mouse battery status, go to the Control panel > Mouse > Bluetooth.• The scroll wheel on the mouse is disabled when the mouse is pairing automatically in both boot mode and Window mode.• The mouse will enter power saving mode when not used for a period of the time.LED
Bluetooth Mouse Set126 Using the WIDCOMM Bluetooth Stack6.1 Using the Stack for the First TimeTo start using the Bluetooth Stack, double click the Bluetooth icon in the system tray. 1. The Initial Bluetooth Configuration Wizard will launch. Follow the instructions on screen to complete the configuration.2. When the Bluetooth Configuration is complete, the following HID screen appears and starts to search for Bluetooth devices.3. Click on the HID device you want to connect with. Then follow the instructions on-screen to enable the selected device.
Bluetooth Mouse Set13About the Bluetooth iconThe Bluetooth icon acts as an indicator for dongle status.1. A red icon indicates there is no dongle inserted.2. A white icon indicates the dongle is plugged in.3. A green icon indicates the dongle has detected the HID devices.6.2 Connecting to the other HID DevicesBesides the mouse, the Bluetooth Stack also allows you to connect to other Bluetooth devices. 1. Make sure the USB Bluetooth dongle has been plugged onto your computer.2. Set the Bluetooth devices, such as printers, modems, and PDAs, you want to connect to the Bluetooth stack.3. Press the USB Bluetooth dongle button until the following HID screen appears.4. Select the type of devices to search for from the drop-down menu.5. The detected devices will be displayed. Click on a device and the stack will instruct you to enable the connection.
Bluetooth Mouse Set147 TroubleshootingIf you have any problems with your Bluetooth mouse, please check the following:• Check the system requirements to make sure that your system is compatible.• Check to see if the batteries in the mouse are installed correctly. Make sure the polarity of the batteries corresponds with the polarity signs inside the mouse battery compartments.• When the mouse LED is lit red, it indicates battery power low. Replace them with new batteries immediately.• Once the Bluetooth stack (see “Installing the WIDCOMM Bluetooth Stack” on page 4) has been installed in your computer, you can check the battery status of mouse from Control Panel > Mouse > Bluetooth.• If the mouse fail to work, check the USB mouse function in your system’s BIOS. The function should be enabled for the normal use of mouse.• If your PC system’s BIOS setup has options for the mouse, make sure they are set to default settings. If you are not familiar with the BIOS, refer to your PC’s manual for more information.• Only use the mouse on a clean, flat, non-slippery surface in order to ensure smooth and accurate cursor action. If you use a mouse-pad, choose a light-colored one, not a dark one, to use less battery power.For further assistance with any other questions you may have, please contact your dealer for technical support.
Bluetooth Mouse Set 15 8 FCC/ Industry Canada NoticeIf you have any problems with your Bluetooth mouse, please check the following:• Check the system requirements to make sure that your system is compatible.• Check to see if the batteries in the mouse are installed correctly. Make sure the polarity of the batteries corresponds with the polarity signs inside the mouse battery compartments.• When the mouse LED is lit red, it indicates battery power low. Replace them with new batteries immediately.• Once the Bluetooth stack (see “Installing the WIDCOMM Bluetooth Stack” on page 4) has been installed in your computer, you can check the battery status of mouse from Control Panel > Mouse > Bluetooth.• If the mouse fail to work, check the USB mouse function in your system’s BIOS. The function should be enabled for the normal use of mouse.•f your PC system’s BIOS setup has options for the mouse, make sure they are set to default settings. If you are not familiar with the BIOS, refer to your PC’s manual for more information.• Only use the mouse on a clean, flat, non-slippery surface in order to ensure smooth and accurate cursor action. If you use a mouse-pad, choose a light-colored one, not a dark one, to use less battery power.For further assistance with any other questions you may have, please contact your dealer for technical support.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IC RSS-210: Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. IMPORTANT NOTE: FCC/ IC Radiation Exposure Statement: This equipment complies with FCC / IC RSS-210 radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu