Pred Technologies USA REACTORS TOKK Reactors Wireless Stereo Speakers User Manual Reactors Quick User Guide

Pred Technologies USA, Inc. TOKK Reactors Wireless Stereo Speakers Reactors Quick User Guide

User Manual

Quick User Guide Model #：TOKK REACTORS Main Features  Fashion and cute Magnets Adsorbed  Stereo sound  Bluetooth remote shutter  Smart Siri Assistant  Hands-free call  Lanyard and jack to attach to device  Rechargeable Battery Easy operation 1. Power On/Off 2. Remote Shutter 3. USB port 4. Speaker 5. Lanyard hole 6. LED Light 7. MIC Button Definition Play/Pause/Answer Call (1) ● Press and hold the Power button to power On/Off. ● Press button (1) to pause when music is playing, press again to replay. ● Press button (1) to answer incoming calls when the device is paired with a phone, press again to end call.
Pairing ● Press and hold the power button on both REACTORS a Blue LED light will flashing on the left speaker; and a Green LED light will be flashing on the right speaker. ● Note: If cannot automatically paired as stereo set, power on both REACTORS at same time, and press any one of button (2) TWO times to pair as one set stereo; Remote Camera (2) ● Open your mobile phone’s camera, press button (2) to take pictures. ● To access Siri or Google, press and hold button (2) to activate voice assistant feature, wait for sound and ask anything. ● When under music playing, press button (2) to increase volume. Working LED Light ● Fast Blue LED flashing shows Bluetooth searching Mode ● Slow Blue LED flashing shows Bluetooth connecting. ● Successful paired as stereo set, a Blue LED light flashing on the left speaker and a Green LED light flashing on the right speaker. Charging LED light ● Steady Red LED light while the device is charging ● Red LED extinguished when fully charged Specifications  Rated Power PO=2W  Frequency Response 180HZ-16KHZ  Distortion Factor THD<1%  Signal to Noise Ratio S/N≥90DB  Separation ≥55DB  Speaker 4Ω 2W  Battery 3.7V/800mAh polymer Li battery  Playing time about 10hrs  Charing time 2hrs
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Navigation menu