Powerwerx TR7400 Digital portable Radio User Manual

Powerwerx, Inc. Digital portable Radio Users Manual

Users Manual

Thank you for purchasing TERA model TR-7200/TR-7400.These models feature 1,024 channels, 64 zones. These radios models are built to DMR standards which insures operation worldwide.To get the most out of your radio, please read this manual carefully before use.TERATR-7200TR-7400www.tera.coUser ManualTR-7200TR-7400
This commercial handheld radio ships from the manufacture “Displayed Locked” per FCC rules. You must first use the programming software to unlock this radio for the first time of use. You will need the programming cable to connect your radio to your computer for programming. Please contact your dealer for radio programming software.When programming this radio for the first time , it is recommended you first READ the radio with the software and then save this file for future reference. In addition, after you READ this radio with software, first make your programming and frequency changes, then send this edited file back to your radio. Please contact the dealer you purchased this radio from or TERA should you have any questions.Initial ProgrammingThe TERA website provides additional information aboutobtaining service or support for the TERA line of digital portable radio and accessories.visit: www.tera.co On-line Service and SupportUser ManualSafety MattersThe following recommendations will help you understand this radios safety requirements. 1. Only qualified TERA technicians are allowed to service this . Do not disassemble the radio by yourself as it will void the warranty. 2. Use only the TERA brand battery pack and desk charger, so as to not damage the transceiver. 3. Do not expose this radio to long periods of direct sunlight, or hot or humid areas. 4. Do not put this radio in dusty or dirty locations. 5. Do not use harsh chemicals, cleaning solvents, or strong detergent to wash this radio. 6. Never transmit on this radio without an antenna.CautionSafety and operability of this radio can’t be guaranteed unless TERA brand accessoriesor parts are used.digital portable radio030405050606070802Attaching/Removing the batteryAttaching/Removing the antennaInstalling/Removing the Belt Clip Installing Hand StrapAttaching the Audio Accessory /Removing Radio OverviewStatus Indicators 12LED Indicator 13Programmable Keys 14Basic Operations 15Turning the Radio On/Off 15Adjusting the Volume 15080910 Contents Safety Matters Product Inspection Get Acquainted Cautions in Charging Antenna Information Attaching and Removing
Safety MattersContentsProduct InspectionrsGet Acquainted15Selecting a Zone15Selecting a Channel16Analog/Digital Switch16Locking/Unlocking the Keypad16Private Call17Group Call17Transmitting an All CallMenu Navigation 18Contact18Message18Call Logs 19Scan 20Settings 20TOT 2021TX Power21Basic Settings26Care and Maintenance27Service and Support28Terms of Warranty22Functions and OperationsSafety Matters To avoid problems caused by electromagnetic interference or electromagnetic compatibility, please turn off the radio in places with “Wireless Communication Transmit Equipment Prohibited”mark, such as hospitals or other health care places. When taking a plane, turn off the radio if required.In a car with air bag, do not place the radio within possibly involved area when air bag expands.Do not expose the radio to direct sunlight or near heating devicesfor a long time.Keep the radio vertical and speak near the microphone during transmitting.Make sure that the antenna is 2.5 cm away from the body during transmitting if you carry the radio on your body.Thanks for using TR-7200 / TR-7400 . Before use, we recommend that:First check the package for any signs of damage;Carefully open the package and identify the items listed below;If any items are missing or damaged during shipment, please contact your dealer.digital portable radio Product InspectionItemsRadio DH-9800 Qty:1Li-Ion Battery Qty:1Charger Qty:1Adapter Qty:1Antenna Qty:1Lanyard Strap Qty:1Belt Clip Qty:1Note: Frequency is marked on the color circle at the bottom of the antenna.User Manual Qty:1Please read rules below. Nonobservance of these rules may cause danger or violation of law.The use this radio must comply with regulations of local government.Turn off the radio before you enter places of flammable or explosive environment.Do not replace or charge battery pack in places of flammable or explosive environment.Turn off the radio before you approach blast area and detonator area.Do not use the damaged antenna which may cause lightly burn on skin.Only qualified technician are allowed to maintain this two-way radio. Do not disassemble the radio by yourself.Applicable Battery Model:lease charge with TERA approved battery; Using other batteries may burst and cause personal damage.Get AcquaintedBattery InformationNote: 1. Do not short-circuit the battery terminals or dispose the battery in fire. Never attempt to disassemble the battery pack.2. Charge the battery in 0-45℃ temperature. Otherwise the battery may not be fully charged.3. Turn off the radio equipped with battery before charge. Use the radio while charging may interfere with charging.4. Do not pull/plug the adapter and the battery during charging to avoid interfere with the charging procedure.5. When the battery power consumes quickly even if it is fully and correctly charged, that means the battery life is over and please replace with new battery.6. Do not charge if the battery or radio is wet. Before charge, you should dry it with cloth to avoid danger. Warning:Conductive metals s uc h as j e w elr y, k ey o r decorating lace may result in short cir c u it a n d generate a large quantity of heat when coming to contact with battery electrodes. Treat any battery carefully especially when placing it into pocket, wallet or other metal container. Charge OperationPlease charge as follows:01 0203 04
Attaching/Removing the AntennaAttaching the antenna:1. Insert the antenna into the connector on the top of radio by holding the antenna at its base.2. Rotate the antenna clockwise to fasten it.Removing the Antenna:Rotate the antenna counter clockwise until you can remove it.Removing the BatteryAttaching/Removing the BatteryAttaching/Removing the AntennaInstalling/Removing the Belt Clip Cautions in Charging1. Turn off the radio. Plug the DC connector of adapter into the DC jack on the rear of the charger. 2. Plug the AC connector of adapter into an AC outlet.3. After the charger is electrified, the LED glows red for 1 second and goes out. That means the charger is ready for normal charging. If the LED flashes red, it means the charger is not ready for battery charging. 4. Insert the battery or radio equipped with battery into the charger. Make sure the battery is in good connection with the charger electrode. 5. LED glows red during charging and flashed during trickle charging because of very low battery power. And after the battery power reached a certain mount during trickle charge, the charger automatically turns to normal charge mode.6. The battery is fully charged when LED glows green. The charger stops charging automatically. Cautions in Charging1. The battery is not charged in factory. Please charge the battery before initial use or after long-time storage. 2. Repeat charging 2 to 3 times will make the battery reach its best capacity. Please replace or charge the battery if battery power is low.3. When the battery power consumes quickly even if it is fully and correctly charged, that means the battery life is over and please contact your dealer and buy new approved battery. Antenna InformationStubby antenna is suitable for short-distance communication; thin and long antenna will provide best communication effect. Also it is comfortable to carry on the waist. The communication range may be shortened in rainy days or in forest. Please make preparations for that .Push the battery latch towards the mark “Lock” to lock it.Match the two grooves of battery with corresponding guides on the back of the radio. And make sure the full contact and parallel between the battery and aluminum chassis. Then push the battery along the guide until the battery latch locks.To remove the battery, first make sure the radio is turned off, then push the battery latch in the opposite direction of the mark “LOCK”to unlock it, and push the battery latch downwards.Slide the battery away from the radio.Installing Belt ClipMatch the grooves of belt clip with those on the rear of radio and press the belt clip downwards until it is locked.Installing/Removing the Belt Clip Removing Belt Clip Use your nail or a tool to lift the metal spring piece in the belt clip from topside and pull the belt clip upward from the battery pack.Note:1. To use belt clip, please install the belt clip onto the battery before the installing of battery pack.2. Remove the battery from the radio before the removing of belt clip.Installing Hand StrapThread the strap into the hole at the back of the radio and fasten it.(Figure 1) (Figure 2)05 0607 08Attaching the BatteryAttaching and Removing
Attaching the Audio AccessoryProgramming Cable1. Remove the screw on the accessory jack cover, open the accessory jack cover as figure show below. 2. Align the plug with the accessory jack.3. Tighten the screw on the plug.Removing the AccessoryTo remove accessories, loosen the screw as figure shown below.Attaching the Audio AccessoryRadio OverviewStatus Indicators Radio OverviewPTT KeySK1（Side Key 1）LCD DisplaySpeakerNumeric KeypadLED IndicatorAntennaOK/Menu Key Accessory JackRadio On-Off/ VolumeControl KnobBack KeyRight Key/ Home Screen KeyLeft KeyUp KeyDown KeyBattery LatchBelt ClipBatterySK2（Side Key 2）TK（Top Key）Channel Selector KnobMicrophone Part Name Part Name Part Name Part NameNo.No.No.No.1 7 13141516171819202122891011122345Status IndicatorsLCD IconsLH12Icon NameRSSIMessage IconsScan IconsTx Power IconsBattery Strength IconsTone IconsRadio StatusNo signalMore bars indicate better signal strengthNew Message/Unread MessageScanning is in progressScanning pauses on a non-priority channelScanning pauses on Priority Channel 1Scanning pauses on Priority Channel 2Low Tx power for the current channelHigh Tx power for the current channelMore bars indicate more battery powerRadio Silent is onRadio Silent is offIcon09 1011 12
LED lndicatorProgrammable KeysBasic Operations Callflashes red.flashes green.LED lndicatorThe top LED indicator will help you easily identify current radio status.For enhanced convenience, you may request your dealer to program the keys【SK1】、【SK2】、【TK】as shortcuts to the functions listed below:Note： 1）Long and short press of a key can be assigned with different functions by your dealer. 2 The【TK】is programmed as the Emergency key by default, and is programmable by your dealer.） Shortcut KeysRadio Disable Radio Enable Radio Check Alert Call Adjust Power LevelRemote Monitor Emergency On Emergency Off VOXMessage Contact Zone UpZone DownZone SwitchKeypad LockVibrationMan Down Squelch Off Battery Power Indicator No.12345678910111213141516171819DescriptionTo disable the radio of a private contact quicklyTo enable the radio of a private contact quicklyTo check the radio of a private contact quicklyTo initiate an alert callTo change the TX power between High and LowTo remotely monitor a contact through one button pressTo initiate an emergency call.To stop the emergency callTo toggle the VOX function between on and off.Quick access to the menu “Message”Quick access to Contact ListQuick access to a desired zoneTo lock or unlock the keypad quicklyTo enable or disable Vibration function through one button pressTo enable or disable Man Down function through one button pressTo always unmute speaker no matter whether carrier is present or not.To show the battery power through one button press.Programmable KeysTurning the Radio On/Off Basic OperationsAdjusting the VolumeSelecting a ZoneA zone is a group of channels exhibiting the same property, and is programmed by your dealer. The radio supports up to 16 zones,each with a maximum of 16channels. You may select a zone through any of the following methods. 1. Always Allow: the user can transmit all the time. 2. Through menu selection. Go to the menu “Zone”, and use the 【Up】/ 【Down】keys to select your desired zone and use【OK】key to switch to the zone.3. . You may quickly toggle to you desired zone by pressing the programmed【Zone Up】/【Zone Down】/【Zone Switch】 key.Note: This feature is available for digital channel only.Through the function keysRotate the【Radio On-Off/Volume Control】knobclockwise/ counter-clockwise until a click is heard to turn the radio on/off.After turning the radio on, rotate the Radio On-Off/Volume Control knob clockwise to increase the volume, or counter-clockwise to decrease the volume. Selecting a Channel Rotate the【Channel Selector】knob to select a desired channel. Users can set the “Tx Admit” feature for each digital channel via programming software. This feature prevents users from transmitting on channels that are already in use. 1. Always Allow: the user can transmit all the time. 2. Channel Free: the radio can transmit only if the channel is free.3. Color Code Free: the radio can transmit only when the channel is free or the color code is not matched.Note: This feature is available for digital channel only.Each channel can be programmed as either analog channel or digital channel. If the current zone includes both analog and digital channels, you may quickly switch between digital and analog through the 【Channel Selector】knob.Digital/Analog SwitchWhen the keypad is not in use, you can lock the ke yp ad toprevent accidental keypad operation. Three methods areavailable for you to lock or unlock the keypad:Locking/Unlocking the KeypadKeypad Lock On: The keypad will be locked automatically if no operation is made for the preset time period. Keypad Lock Off: The keypad will not be locked automatically. However, you can lock or unlock the keypad via the key combination or Keypad Lock key mention above .3. Through menu selection Go to Settings -> Basic Setting -> Keypad Lock, and then select On or Off. 2. Through the function key Press the programmed Keypad Lock key to lock or unlock the keypad.1. Through key combination Use“【OK】+【*DEL】”to lock or unlock the keypad. CallYou may transmit a Private Call through any of the following methods. When transmitting a Private Call, the icon “ ”will appear.Transmitting a Private Call Transmitting a call to the preset contactIn standby mode, pressing PTT key will transmit an individual call to the contact (a Private Call number) preset for the current channel.Note: Your dealer may preset a contact for each digital channel. The preset contact could be a Private Call number, a Group Call number or an All Call number.13 1415 16
Menu NavigationMenu NavigationSettingsReceiving an All CallWhen an All Call is received, your radio will display the icon .Make a Call on Analog Channels To transmit on an analog channel, hold down the PTT and speak into the microphone. To receive, release the PTT.Transmitting an All CallMethods are the same as those in Transmitting a Group CallWhen transmitting an All Call, the icon“ ” will appear.MessageTo access this item, press the Menu key in idle mode and then select “Message”, or press the shortcut key for Message directly.InboxTo access this item, press the Menu key in idle mode and then select “Message”, or press the shortcut key for Message directly.For each message, you can choose to perform any of these operations: Reply/Forward/Edit/Delete. To delete all messages in the Inbox, select“Message→Delete→Inbox”.New MsgYou can create your desired text messages (150 characters at most) and send it to an individual user or to a talk group. OutboxThe Outbox can save up to 15 sent messages. When the Outbox is full, the oldest entry will be overwritten by the latest one auto matically.For each message, you can choose to perform any of these operations: Resend / Forward / Edit /Delete. To delete all messages in the Outbox, select“Message→Delete→Outbox”.Quick TextUnder this option there are some text messages (15 entries at most) preset by your dealer. You can choose to edit and send any entry.Drafts BoxThe Drafts Box can save up to 15 messages. Users can re-edit or send the message saved in the Drafts Box. CallDetailYou can view details of each contact. New ContactYou can add a Private Call contact to the contact list. The number and alias of each contact must be unique, and the available number range is 1-16776415. Editing a ContactYou can edit the number and alias of each Private Call contact. Deleting a ContactYou can delete a Private Call contact. However, please note that you can not delete the contact when there is only one entry left in the list. Sending MsgUsers can send a message to a contact. You can enable Radio Check/ Alert Call/ Remote Monitor/ Radio Disable/ Radio Enable of a Private Call contact.Manual DialTo access this item, press the【Menu】key and then select “Manual Dial”.MessageContactManual DialContactManual DialCall LogsTo access this item, press the【Menu】key and then select “Scan”.You can save up to 64 entries in the list. To access this. item, select “Contact” or press the shortcut key for Contact List.You can manually input the Private Call number for calling.Call LogsTo access this item, press the Menu key in idle mode and thenselect “Call Logs”.This radio can save up to 20 entries in the Outgoing List, Incoming List and Missed List respectively (only for private call list). Whenthe memory for call logs is full, the oldest entry will be overwritten by latest one automatically. After accessing a list and selecting an entry, you can perform any of these operations: hold down the PTT key to initiate a call, view, send a message or delete it. To delete all entries in Outgoing List, Incoming List and Missed List at a time, select “Call Logs→Delete→Outgoing /Incoming /Missed”.ScanTransmitting a call through Contact List or Call Logs1) Go to Contact, or go to Call Logs ->Call List Missed List 2) Use the Up/Down key to select the Private Call number you want to call. 3) Hold down PTT key to transmit a Private Call to the selected contact.->Outgoing/Incoming/Transmitting a call through Manual Dial1) Go to Manual Dial.2) Input a Private Call number you want to call.3) Press PTT key to transmit a call. Note: If the keypad input function is enabled by the dealer via the programming software users can input a Private Call number though Numeric Keypad.You may transmit a Call through any of the following methods. When transmitting a Group Call, the icon“ ” will appear.Group Group Transmitting a call to the preset contactIn standby mode, pressing PTT key will transmit a group callto the contact (a Group Call number) preset for the currentchannel. Transmitting a call through Contact List or Call Logs 1) Go to Contact . 2) Use the Up/Down key to select the Group Call number you want to call. 3) Hold down PTT key to transmit a Group Call to the selected contact. Note: You can transmit an All Call only when it is enabled by your dealer.Receiving and Responding to a CallGroup Responding to a Call , after a Call is received, you may press the PTT key within the preset time period to call back. If you do not respond to a received Private Call, the radio will display the missed call icon“ ”.Group Group Note: You cannot respond to an All Call.Note: To ensure an optimal volume for the receiving radio, hold the radio approximately 2.5 to 5 centimeters away from your mouth during transmission.ContactMessage Manual DialCall LogsScanProgramSettings Zone Main MenuInboxNew MsgOutboxMessageContactManual DialContact To access this item, press Menu key in idle mode and then select “Contact”. MessageContactManual DialManual DialCall LogsScanScan On/OffThe function “Scan” allows you to listen to communication activities on other channels so that you can keep a close track of your team members. This option is used to enable or disablethe function. Scan ListThe function “Scan” allows you to listen to communication activities on other channels so that you can keep a close track of your team members. This option is used to enable or disable the function. ProgramTo access this item, press the【Menu】key and then select “Program”. Call LogsScanProgramChannelYou can optimize your radio performance by customizing related parameters according to actual needs and your preferences. Frequency：to set the Rx frequency and Tx frequency of current channel Slot ：to select the Tx slotColor Code ：to set the color code value for current digital channel (available range: 0-15)RadioRadio ID ：to view and change radio ID (this item is restricted by its available range “1~16776415”and the program software). SettingsTo access this item, press the【Menu】key and then select “Settings”. You can optimize your radio performance bycustomizing related parameters according to actual needsand your preferences. ScanProgramSettingsDevice InformationWith this option, you can view the basic information of. your radio, including radio ID, software version, firmware version, model number. Parameter SettingTOTWith this option you can set the duration that the radio can 17 1819 20Menu Navigation
continuously transmit. The purpose of this feature is to prevent any user from occupying a channel for an extended period. Ifthe preset time expires, the radio will automatically terminatetransmission and keep beeping. To stop beeping, please release the PTT key. You must wait for a certain time period before you can press and hold down the PTT key to transmit again. This option allows users to enable vibration alert for messages, private calls, alert calls and so on.To set the language in which all interface information s displayed. At the moment, this radio only supports two languages: Simplified Chinese and English.Keypad Tone To set whether the radio will give tone indication when there are keypad operations and to set the volume of the tone. VOXThis option allows users to configure the VOX function. When enabled, this function allows users to speak into the radio directly without pressing PTT key.To set whether to enable auto keypad lock.To access this item, press the【Menu】key and then select “Zone”.This radio supports up to 16 zones. You can use this menu to select your desired zone or you can use programmed Zone Up】/【Zone Down】/【Zone Switch】key to switch to your desired zone.SettingsBasic OperationsEmergency ModeNote：This feature is null in Emergency mode. Tx Power This option allows you to set transmit power level. Alternatively, you can change the power level by pressing the shortcut key for Adjust Power Level.There are two levels available: High (indicated by H ) andLow (indicated by L ). High power level enables you to communicate with further team members. VibrationTo set tones for your radio, you can set the following tones:Radio SilentTo set whether the radio will give tone indication. If Silent on is selected, all alerts will be off. ToneLow Battery Tone To set whether the radio will give tone indication when the battery power is low and to set the volume of the tone.Message Tone To set whether the radio will give tone indication when receiving a message and to select a ring .Private Call Tone To set whether the radio will give tone indication when making a private call and to select a ring.Group Call Tone To set whether the radio will give tone indication when making a group call and to select a ring.Basic SettingsLanguageKeypad LockDisplay Setting Backlight：To set the backlight parameters. There are three options available: On, Off and Timer.Backlight Time：The backlight will be off automatically upon expiration of the time set here. The available range is 5-15s.Brightness： To set the display brightness. You can increase or lower it using 【Up】/【Down】 key.Keypad LED To set whether to enable keypad LED. When “On” is selected and there is no keypad operation in 5s, the keypad LED will be off.ZoneFunctions and OperationsThe feature “Scan” allows you to listen to communication activities on other channels so that you can keep a close track of your team members.Scan1、To enable the feature, you can select “On”from the menu “Scan”; or switch to a channel for which the feature “Auto Scan”is enabled via the programming software.2、After the feature is enabled, your radio will scan according to the scan list set for the channel on which scanning starts. The scanning process is as follows: During scanning, LCD displays icon , and LED flashes orange. When activities are detected on a channel, the radio will stay on the channel to receive current activities. If your radio stays on a non-priority channel, LCD will display icon ; If on Priority Channel 1 or Priority Channel 2, LCD will display icon or icon respectively.To exit the scanning process, you can select “Off” from the menu “Scan”.Operation:Squelch OffIf the feature “Squelch Off” is enabled, your radio’s speaker will keep unmuted no matter whether carrier is present.EmergencyIf the feature “Squelch Off” is enabled, your radio’s speaker will keep unmuted no matter whether carrier is present.In case of an emergency, you can use the feature to ask for help from your companion or control center.Emergency Mode1、Digital EmergencyDescription The radio will emit siren locally, but will not transmit any emergency signal to the control center.The radio gives visible and audible indications during emergency state.The radio gives no indication during emergency state.The radio gives no indication during emergency state, but will unmute its speaker once it receives a call.The radio transmits the emergency signals to the control center first, and then gives siren locally with visible indication.Emergency TypeSiren OnlyRegularSilentSilent w/ VoiceAlarm w/ SirenThe Emergency process has the highest priority.You can make emergency operation even when your radio is transmitting or receiving.To enable the feature on a channel, an emergency system must be assigned to the channel via the programming software. In addition, the Emergency type and Emergency mode are settable via the programming software. Emergency TypeThere are five Emergency types available. You can select one of them via your dealer. Emergency ModeYour radio supports three Emergency modes. You can select one of them via your dealer. To set this feature via programming software. Once this feature is activated, the radio will enter Man Down status automaticallywhen it tilts to the preset gradient. Or you can press the shortcut key to enable or disable this function.This feature triggers off the Emergency mode if the user fails to have any Lone Worker response operation on the radio for a certain time period. This feature is designed for persons who work alone.If the user cannot operate the radio within the preset time due to emergency, the radio will make an emergency alarm automatically to inform user’s colleagues or the control center for help.Emergency ModeAlarmAlarm w/ CallCall OnlyDescriptionThe radio only sends emergency alarm request upon emergency activation.The radio sends emergency alarm request before the emergency call upon emergency activation.The radio only transmit Emergency call upon emergency activation2、Man Down3、 Lone Worker21 2223 24
Optional AccessoriesCare and MaintenanceService and SupportTerms of WarrantyQuestion and AnswerCare and MaintenancePhenomena Analysis SolutionThe equipment cannot be powered on.During receivingsignals, the voiceis weak,discontinuous ortotally inactive.You can notcommunicate withother members.Irrelevantcommunications ornoises are heardon the channel.The battery may run out.The battery may be improperly installed.The battery may suffer from poor contactcaused by dirtied or damaged batterycontacts.The battery strength may be too low.The volume may be set to a low level.The antenna may get loose or may beimproperly installed.The speaker may be blocked or damaged.The frequency or signaling may beinconsistent with that of other members.The channel type (digital/analog) may beset inconsistently.You may be too far away from the groupmembers.You may be interrupted by radios using thesame frequency.The radio may not be set with any signaling.Remove the battery and attach it again.Recharge or replace the battery.Clean the battery contacts. If the problem can notbe solved, contact your dealer or authorized servicecenter for inspection and repair.Recharge or replace the battery.Increase the volume.Power off the radio, and re-install the antenna.Clean surface of the speaker. If the problem can notbe solved, contact your dealer or authorized servicecenter for inspection and repair.Set your TX/RX frequency and signaling to the sameas that of other members.Make sure all members are on the same digital/analog channel.Move towards other members.Change the frequency, or adjust the squelch level.Set signaling for all member radios to avoidinterference at the same frequency.Service and SupportTERA Radio provides warranty and non-warranty support for this radio and accessories.Warranty and Repair Services1. TERA two-way radio body has an industry leading 2-year warranty. Radio accessories(battery, charge adapter, charger and antenna, speaker mics) include a 6 month warranty from date of purchase.2. The radio warranty of 2-years is in effect from the original purchase date on the sales receipt or invoice.3. Repair or Replacement is available provided the original purchaser’s sales receipt copy is included when the radio or accessories are sent in for repairs.4. Replacement and repair or radios and accessories is provided at the discretion of TERA radio.5. All repaired parts have its own warranty of 90-days from the repair date or the original radio warranty depending on the longer one is valid.6. The warranty is only valid using this radio for normal use. And guaranty is unavailable under such conditions: dissembling or modifications damages caused by outside force and usage of unapproved accessories or antenna, not according to the user manual and so on.7. Warranty is void if the TERA label or Serial Number label is missing or torn off. Cautions1. Read the user manual before use.2. Do not use the radio with damaged antenna. Use the radio only with standard antenna.3. Turn off the radio in potential dangerous environment.4. Avoid the contact between the battery and the metal oily or corrosive objects.5. Do not dip the radio or battery into water or throw them in fire.6. Use the radio only with standard battery, adapter charger and earphone. Optional AccessoriesOptional accessories are available according to your requirements. All accessories with good quality will ensure you clear communication and outstanding performance.Optional UHF Antenna G-Hook Lapel Mic Covert Clear Acoustic Tube Earphone MIc USB Programming Cable Heavy Duty Speaker MicTerms of Warranty1. TERA two-way radio body has an 2-year guarantee; accessories (battery, charge adapter, charger and antenna), earphone 6 months.2. Only the original purchasing sales receipt or valid dealer’s invoice (The invoice will give clear indication of items purchased and the radio serial-number, and purchasing date).3. Replacement and repair is available subject to the presentation of original purchasing invoice in case that the radio cannot work normally as the instruction says within 30 days from the purchase date. (Note that there must not be visible abrasion on radio body and accessories.4. Repair of accessories (battery, adapter, charger and antenna) is available to the presentation of original purchasing invoice.5. The cost of materials and labor for repair are covered in warranty.6. Warranty is void in case that the TERA mark or the serial-number mark is torn off.7. Warranty is void in cases below: 1) Beyond the warranty period; 2) Defects or damages under abnormal use; 3) Defects or damages because of mis-operation, accident and carelessness; 4) Defects or damages because of incorrect testing, operation, repair, installation, reconfiguration or adjustment; 5) Defects or damages to antenna because of non-material or non-processing problems; 6) Defects or damages because of unauthorized repair and disassembling; 7) Product that the serial-number marks is torn off or unable to identify; 8) Product with unclear purchasing date on original sales receipt. 9) Battery under such conditions: a. Any damages or unsealing to the battery pack; b. Defects or damages to battery because of charging with improper equipment or use beyond regulated maintain condition;10) Abrasion under normal use. 25 2627 28
SafetyFCC Licensing InformationWarningWarning NoesEvery effort has been made to ensure that the information in this document is complete, accurate, and up to-date. TERA Radio assumes no responsibility for the results of errors beyond its control. The manufacturer of this equipment also cannot guarantee that changes in the equipment made by non-authorized users will not affect the information in it.FCC Licensing InformationThis TERA radio operates on Commercial / Land Mobile frequencies which require a license from the Federal Communications Commission (FCC) for business, personal, education and recreational use. To obtain forms, call the FCC forms hotline at: 1-800-418-3676 or go to http://www.fcc.gov.For questions concerning commercial licensing, contact the FCC at 1-888-CALL-FCC(1-888-225-5322).SafetyThe TERA handheld transceiver has been carefully designed to provide you with years of safe, reliable operation. As with all electrical equipment, however, there are a few basic precautions you should take to avoid hurting yourself or damaging the radio:• Read the instructions in this handbook carefully. Be sure to save it for future reference.• Read and follow all warning and instruction labels on the radio and owner’s manual.• Do not carry the transceiver by the antenna. This may damage the antenna or antenna terminal. Grasp the handheld by its base (not the antenna) when you need to place or remove it.• Do not keep the radio with the antenna very close to, or touching exposed parts of the body, while transmitting. TERA radios will perform best, if you speak 2-4 inches away from the microphone and the radio is vertical.• Be sure the “PTT” key is not pressed when you do not need to transmit.• Do not operate the radio near unshielded electrical blasting caps or in an explosive atmosphere.• Do not transmit without the antenna fitted on the radio. Though it is provided with a protection, it may damage the TX output final stage.• Respect the environment conditions. The radio is designed to be used in heavy environments, however avoid exposing it to extremely hot or cold temperature (out of the range between –20 to +140°F). Do not expose the transceiver to excessive vibrations as well as dusty or rainy locations.• Never try to disassemble or service the radio by yourself (aside from the routine maintenance described in this handbook). It may cause damage to the radio transceiver and void your warranty requiring extensive repair work. Always contact your local dealer for assistance.• Use only authorized accessories. Using non TERA radio brand accessories may seriously damage your handheld transceiver and void your warranty.• Do Not spill liquid of any kind into your radio. If the transceiver gets wet, immediately dry it by a soft and clean cloth.• Switch the radio off before you clean it. Follow the directions described in the paragraph “Care and maintenance”.• Handle the battery properly. Never place the LI-ion battery in your pocket or purse with loose coins. This could result in short circuiting the battery.• Be certain that your power source matches the rating listed for the supplied battery charger (AC adapter). If you are not sure, check with your authorized TERA dealer• Avoid damaging the power cable of the battery charger. Do not step on or place anything on it as this could result in a damaged charger power cord. This product complies with the requirements of the Council Directives 89/336/EEC and 73/23/EEC on the approximation of the laws of the member states relating to electromagnetic compatibility and low voltage..29 3031Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution:

Navigation menu